How to capture a window in Safari that is bigger than the screen

How do I capture a window in Safari that is larger than the screen it is displayed upon? I am using a MacBook PRO 13" with Mavericks.

Try Paparazzi

Similar Messages

  • How to add a graphic watermark that is bigger than the photo?

    How to add a graphic watermark that is bigger than the photo?
         Basically I want to add a watermark that is a border, like "outside stroke" so that it doesn't clip the photo.
         Upper, left and right side are 10px and on the bottom is my signature that is 40px high. I know how to do this in Photoshop, but can't figgure it out in Lightroom.
         The inset function with negative numbers doesn't work, because it only export to the size of the exported image, instead it should resize the image with those 10px up, left and right and 40px on      the bottom.
    My bordes look like this either one of the two can be used, and if you scroll down you will se how the end result should look like.
    And below is what it should look like, so that Lightroom doesn't clip the photo.

    Are you sure the focus of your piano roll is on the right track? Are you zoomed in/out enough?

  • What happens when an iPod is synchronized with an iTunes library that is bigger than the available space on the iPod?

    What happens when an iPod is synchronized with an iTunes library that is bigger than the available space on the iPod? I did this some time ago. On screen was shown available space somewhat less than 120 GB, but maybe somewhere between 10 and 20 GB more in the library. I had to get the iPod updated anyway, so I did proceed. However, afterwards the total content of the library was only about 110 GB. Now I wonder what did actually happen. Was the first sign only corrected for double copies of the same files or lost files or where files deleted from iTunes? And if files where deleted from iTunes, were they also deleted from my computer?

    Same as you would if you bought a pc; copy everything from your old computer to your new one.  Then you can just sync everything from the new computer, as you did with the old one.

  • I have an iphone 4 and it has tiny spots on the screen that is brighter than the screen's brightness

    The title says it all!
    is there a way to fix this problem?

    Those are probably stuck pixels and if so are a defect in the screen. If that is indeed the case, it's not something a user can fix. Call Apple Support or make an appointment at an Apple Store and discuss theproblem with them.
    Regards.

  • When I enter the Apple store up and I Try to download an app up comes a window telling me that I am in the USA store and must change to the Australia Store. I actually live in Australia. How do I change to the Australian Store?

    When I enter the Apple store up and I Try to download an app up comes a window telling me that I am in the USA store and must change to the Australia Store. I actually live in Australia. How do I change to the Australian Store?

    Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region...change here.

  • How do I uninstall Google Drive so that I can reinstall the upgrade?

    I have a Mac Air, Processor 1.7 GHz Intel Core i5 running OS X (10.9.3)
    I have been using Google Drive to share files with friends and family but this week began getting a pop-up that I need to upgrade my Google Drive software.
    I downloaded the file from Google but when I try to install/replace, I get the following two messages:
    The operation can’t be completed because the item “Google Drive” is in use.
    The operation can’t be completed because a required item is in use.
    My browser is closed so I don't know why it appears that the software is in use.
    So, I checked this forum and found that because of some problems with Google Drive and OS X, I need to "uninstall" my current Google Drive application but I don't know how to do that.
    Can someone please tell me, step-by-step, how to completely uninstall this software so that I can reload the newer version?
    Thanks so much for your help!
    Chris Carbaugh

    Open Google Drive window. Click On "Settings" at top of window. Select move to trash. Then Empty Trash.

  • How do I open a .pdf file that I transferred to the ipod touch 5 using Itunes?

    How do I open a .pdf file that I transferred to the ipod touch 5 using Itunes?  It is shown in the Adobe Reader Documents window on Itunes. All help greatly appreciated!

    Is it not showing up in the documents tab when you open Adobe Reader?

  • How Do I create Windows Form file in VS and add the form to my VS project?

    C#, How Do I create Windows Form file in VS and add the form file to my VS project by using C# code?
    I like to create a Windows Form file into my VS Win Form project by using C#. I have the path and the file name.
    I need a Win Form with FileName.cs, FileName.Designer.cs, FileName.resx, and FileName (as you see it VS by adding a Win Form manually by using VS)
    Rune Brattas

    You cannot create a Form from code at run time. 
    For one thing, the user running your application will, almost certainly, not have  a copy of Visual Studio to hand with which to build anything.  (Not that you actually need 'Studio at all; Notepad and csc.exe are all you actually
    need), but that's another story).
    You can do this with an awful lot of pain, using the innards of the compiler from iside your own program, compiling the new Form's source code on the fly and then executing the resulting assembly within your application.  IMHO, that's a simply terrifying
    prospect especially as the code you will be compiling will be on someone else's machine and over which you will have absolutely no control.  If you're lucky, they'll spell something wrong and it won't compile.
    The "usual" way to do this sort of thing is to create additional, "plug-in" forms as library assemblies and have your program load and execute these at run-time. 
    Regards, Phill W.

  • [svn] 668: opensource: ant package now works on a Mac; Darrell pointed out some Windows-centric backslashes that were holding up the show (fixed others that I found too).

    Revision: 668
    Author: [email protected]
    Date: 2008-02-26 16:26:38 -0800 (Tue, 26 Feb 2008)
    Log Message:
    opensource: ant package now works on a Mac; Darrell pointed out some Windows-centric backslashes that were holding up the show (fixed others that I found too).
    Modified Paths:
    flex/sdk/branches/3.0.x/build.xml
    flex/sdk/branches/3.0.x/frameworks/tests/checkinapp/build.xml
    flex/sdk/branches/3.0.x/modules/asc/build/java/build.xml

    It sounds to me like Final Cut Express is what you really need to learn. I learned it by buying a book that included a DVD of examples to use as you go through the book. It will only take a couple of hours to figure out how to do most of what you need to know. Its the last 20% that will take the longest to learn, mostly because its the stuff you'll use the least.
    The book I used was written by Tom Wolsky. It was for version 2 of the program. I don't know if its been updated. Take a look in the Final Cut Express forum. Ask the forum for recommendations. You'll probably get a response from Tom Wolsky himself since he's a regular on that forum.
    I've since upgraded to Final Cut Studio. I occasionally still use iMovieHD because its easier for some tasks but not very flexible. For example, the themes in iMovie are easy to use but it would be near impossible to recreate them in Final Cut Express. So I sometimes just populate the themes in iMovie and export them to Final Cut to add to a larger project.
    There are a couple of potential stumbling blocks in learning Final Cut, one of them being media handles. Once you figure out those, you'll be on your way...

  • How to create a map that is larger than the game in width and height?

    hi,
    i wounder how i can create a map(not the design) that is larger than the game in width and height, part of it will appear in the main page and anther part you can move to it after you press the arrow symbol, but the map is just one image so i want put it in line and out line the game page, and the out line part includes buttons and symbols the player can use, but it will be in line and the other part will be out line when you press the left arrow or the down arrow, how i can do that?
    and is that possible to animate it so when the player press the arrow, will give it action to start the animation in one sec, i know how to animate it if that possible but i don't know which code i will use for the mouse click with the arrow symbol, and how to use the same code in the same symbol to start anther animation depending on which part of the map is on?

    I don't know a lot about mask and masked layers and how to work with the normal layers beside i will use some 3D graphics but not in the background, i will explain all this to you to be more clearly.
    first i am using action script 3.0
    close ex,
    you have 2d map"image"  900*300 pixel.
    this image contains some 2d symbols when you click will go to anther normal map (anther normal layer) so they must appear.
    your game 320*320 px, and the place the map will show on 300*300, and there's basics objects will be in most pages including the page that show the map so i don't know a lot about how this will work with mask layers.
    so you can only see the left side of the map image and what it contains, while there's two arrows one to the left and one to the right there's three cases here,
    first when it show the left side(start from x:0 to x:300), the left arrow will not active when you press and the right arrow will start an animation that make the map image move to the mid side in one sec when you press.
    in mid side (start from x:301 to x:600) the same left arrow will active when you press to send you back to the left side while the same right arrow will be active to send you not to the mid side but to the right side,
    when moved to the right side the same left arrow will be active to send you to the mid and the right will not active when you press and depending on that,
    first how to make the large image appear with the three sides in the same place without effecting the other objects "like disappearing them" ?
    and the codes i need in the same left or right arrow symbol to make different actions with the same symbol when clicked depending on which part of the map is on.

  • When i play back an mp3 dj mix i,ve burn,t to cd in my car when i turn the engine of and then restart the car the cd starts back from the beginning how do i solve this problem so that when i turn the engine on end off the cd plays from the same place

    when i play back an mp3 dj mix i,ve burn,t to cd in my car when i turn the engine of and then restart the car the cd starts back from the beginning how do i solve this problem so that when i turn the engine on end off the cd plays from the same place it did before i turned the engine off

    It could be that the CD player will only playback "Redbook" CD's from the previous position.
    And starts mp3 type CD's from the beginnig.
    However.. it's not Logic related.
    pancenter-

  • HT1338 how do i load windows 7 on a mac air using the super drive?

    How do I load windows 7 on a Mac Air using the super drive?

    You use Boot Camp to partition the SSD in the Air, download the Win 7 Support files from Apple (part of the boot camp process), save them to a USB thumb drive, have the USB superdrive connect to the Air with the Win 7 install DVD in the drive. Once partitioned the system will reboot and start the Win 7 install.

  • HT4623 how can i update my iphone 4 that does not have the update option in the settings?

    How can i update my iphone 4 that does not have the update option in the settings?

    From the article you linked, scroll down to the section "Update your device using iTunes"

  • I have finally figured out how to export an iphoto album so that I can maintain the proper order of the photos after burning the file. How do I keep each individual photo title and description after exporting and burning?

    I have finally figured out how to export an iphoto album so that I can maintain the proper order of the photos after burning the file. How do I keep each individual photo title and description after exporting and burning?  Presently after exporting and burning each photo is identified by the file name rather than each individual title description.  

    File name and Title are not the same thing.
    Filename is attached to the Jpeg file in the Finder.
    Title is attached to the photo within the Jpeg file - as is the description. These are written to the Exif and IPTC metadata on export.
    So: File -> Export. Kind: Jpeg or Tiff and Check the box at 'Title and Keywords'. This will write the Title, keywords and descriptions (though not explicitly stated) to the metadata. This can then be viewed in any app that understand this material.
    You can choose, if you wish, to also use the Title as a Filename - that's an option at File Name
    Regards
    TD

  • How can I convert a pdf file that's larger than 100MB to word

    How can I convert a pdf file that's larger than 100MB to word?
    I have just paid $20 to Adobe to get this facility but It won't work ,
    as the pdf is larger than 100MB,
    I actually believe that I have paid twice for adobe but I'll take this up with them,
    in the meantilme,
    do you have any suggestions, I really need this material in word urgently,
    many thanks
    Shanna

    If your files are this large, ExportPDF is the wrong tool for you. You need Adobe Acrobat, which runs locally and does not need to send your files to Adobe.

Maybe you are looking for

  • Create Alerting System in Transcational replication

    Hi, Server A -->publisher and Distributor Server B -->Subscriber TX Replication,Pull Subscription. Q:) we have configured replication and we are monitoring the replication using the following command exec [distribution].sys.sp_replmonitorhelpsubscrip

  • Where to post feature requests?

    There are some features I'd love to see in the next Nano or software update. Is there a specific place to post feature requests? Thanks!

  • Very helpful error message: "An unknown error occurred (-12939)

    My iPhone will now play nothing that hasn't already been downloaded to it via Match. 'Use Cellular Data' is set to ON. Sometimes after tapping the Play icon an error message will pop up after a while: 'Unable to Download Songs - An unexpeced error oc

  • Data Pump : Table export from 9i to 10g

    We are creating dump file for some tables with clob columns. These tables are in Oracle 9i and have to be moved to 10g. Our DBA's are suggesting that we cannot import those dump files directly in 10g database, otherwise there can be NLS and text issu

  • [iPhone] Letter list like in Contacts App

    Seeking i18n experts - and if you don't know what 'i18n' is then you aren't one The Contacts app shows the letters A-Z on the list of contacts whether the contact list uses all of those letters or not. For fun I switched my iPhone's language to Russi