How to Change Analysis Services Server for Power View

I can't seem to figure out how to change what SSAS server/instance that is used to build the cubes for Power View items uploaded to SharePoint. I tried changed the trusted servers listed in the Excel Services service application but if I remove the original
SSAS server (which of course is a test server, not to be used for production) and have only the prod SSAS instance listed the reports fail to load with the generic 400 error. Is there another setting that I'm missing?
Thanks,
Kyle

Hi ,
Since this issue is related to SQL Server, I will move this thread to SQL Server forum. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Similar Messages

How to build high usability navigation for Power View on SharePoint 2013?

I have Power View on SharePoint 2013. I have both SSAS Multidimentional and Tabular model in use.
I have several Report.drlx file in Report libary in SharePoint.
When I click the file, it works fine, but I feel that there are usability problems like:
A) Getting back to SharePoint site is not intuitive. Difficult to find home.
B) Diffucult to move between report to another. Need to return Document library.
What is best practise for displaying several Power View reports on SharePoint?
Kenny_I

Hi Kenny_I,
Just as you said, we cannot directly navigate to Home page when we view an .rdlx report in SharePoint site. We need click the Arrow to go to the previous page (Document Library), then click “Home” to navigate to Home page. If we want to move from a report
to another report, we should still use the same way. This is by design.
If you want to jump from one report to another report, we can add a hyperlink to a text box in a sheet or view. Personally, I understand your feeling and how frustrated when you find this issue. So, it is my pleasure to help you to reflect your recommendation
to the proper department for their consideration. Please feel free to submit your situation on our product to the following link:
https://connect.microsoft.com/.Your feedback is valuable for us to improve our products and increase the level of service provided.
Thank you for your understanding.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to change JNDI service provider for EJB's?

I need EJBean's home interface to be bound to another JNDI provider, not Weblogic.
How can I do it?
The most simple solution is not working: to specify <jndi-name> in weblogic-ejb-jar.xml
for bean as "xxx:bean_name".
By JNDI rules for such names context factory with name com.sun.jndi.url.xxx.xxxURLContextFactory
will be used. But for Weblogic this does not work. An exception is thrown during
bean deployment -
javax.management.MalformedObjectNameException: ObjectName: Invalid value -> xxx:bean_name
at javax.management.ObjectName.validateAndAdd(ObjectName.java:440) at javax.management.ObjectName.initObjectName(ObjectName.java:409)
at javax.management.ObjectName.<init>(ObjectName.java:254) at weblogic.management.WebLogicObjectName.<init>(WebLogicObjectName.java:196)
at weblogic.management.runtime.RuntimeMBeanDelegate.register(RuntimeMBeanDelegate.java:90)
at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:83)
at weblogic.ejb20.internal.BaseEJBHomeMBean.<init>(BaseEJBHomeMBean.java:33) ......................

This is not an answer on my
question - My questions was: how to force a Welogic EJB Container to BIND EJBean's
home interface to another JNDI Service provider, not Weblogic.
But you wrote how to use JNDI in general - I already know how to use it :)))
Phil.
"VSK" <[email protected]> wrote:
Hi
Have a look at the code below
private Context getInitialContext () throws NamingException
String from = "CtxHelper::getInitialContext ";
String webLogicHostUrl = t3://SERVERNAME:9001
Logger.debug(from, "Begin Method", 3);
Hashtable h = System.getProperties();
h.put(Context.INITIAL_CONTEXT_FACTORY,"weblogic.jndi.WLInitialContextFactory
h.put(Context.PROVIDER_URL, webLogicHostUrl);
return new InitialContext(h);
} //end getInitialContext
This way we will get the InitailContext and then do a jndi lookup using
the
Context object as follows
ctx.lookup..........
Now in the above code replace weblogic.jndi.WLInitialContextFactory by
ur
provider.
Hope this helps.
-VKS
"Phil Peshin" <[email protected]> wrote in message
news:[email protected]...
I need EJBean's home interface to be bound to another JNDI provider,not
Weblogic.
How can I do it?
The most simple solution is not working: to specify <jndi-name> inweblogic-ejb-jar.xml
for bean as "xxx:bean_name".
By JNDI rules for such names context factory with namecom.sun.jndi.url.xxx.xxxURLContextFactory
will be used. But for Weblogic this does not work. An exception isthrown
during
bean deployment -
javax.management.MalformedObjectNameException: ObjectName: Invalidvalue -> xxx:bean_name
at javax.management.ObjectName.validateAndAdd(ObjectName.java:440)at
javax.management.ObjectName.initObjectName(ObjectName.java:409)
at javax.management.ObjectName.<init>(ObjectName.java:254) atweblogic.management.WebLogicObjectName.<init>(WebLogicObjectName.java:196)
atweblogic.management.runtime.RuntimeMBeanDelegate.register(RuntimeMBeanDelega
te.java:90)
atweblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate
..java:83)
atweblogic.ejb20.internal.BaseEJBHomeMBean.<init>(BaseEJBHomeMBean.java:33)

Opened a SSAS project through connecting to analysis service server.. now need to put into source control

hi there:
I've connected to a SSAS project using connecting to analysis service server ... After a few modifications, I'd like to save it under a different name and eventually get put into the source control...
Can someone tell me how to do that?
thanks
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

Hi Cat_ca,
In your scenario, you can create a
Import Analysis Services 2008 Database project to import the AS database to the project, and then change the database name following the steps below.
Right-click the project and select Properties.
Go to deployment option on the left pane.
Change the Database name.
Then deploy the project to Analysis Services server. The screenshot below are for your reference.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

How to change your Administration Server password when you're locked out

How to change your Administration Server password when you're locked out
The Netscape server products are all managed by a single administration
server, which gives you a web forms-based interface you can use to
configure them, start/stop them, check their logs, and so forth.

There are three levels of protection that keep the general public from
being able to get into your administration server and mess up the
configuration of any Netscape servers you have installed:

<OL>
<LI> Obscurity: Your administration server can run on any port you'd
like (usually something between 81 and 30,000), so if an attacker
doesn't know what port to find your admin server on, he can't get
into it.
<LI> Host restrictions: You can tell your admin server to only allow
connections from specific hosts, and to reject all other hosts.

<LI> Password protection: Even if a user connects to your admin server
from a valid host, he won't be allowed to get into even the first
page unless he presents a valid username and password.
</OL>

If you, the legitimate administrator of your web server, are unable to
access the administration server (if you forgot your password or the
admin port number or if you accidentally locked your own site out),
then here is how to get past each of these levels of protection:

<OL>
<LI> If you don't remember what port your administration server is
running on, just look in your "ns-admin.conf" file, which is in
the "admserv" directory under your Netscape server directory.
(For 1.x web servers on Windows NT, run "regedt32" and go to the
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration" section).
You will see a "Port" entry there that specifies what port your
admin server is on. You can change this value if you want your
admin server to run on a different port, but make sure you restart
the admin server after you change the value.

<LI> If your admin server is complaining "Unauthorized host" when you
try to connect to it, then you can open it up to all sites by
going into the "ns-admin.conf" file or the "Administration"
section of your NT registry, as described above, and deleting the
lines for "Hosts" and "Addresses" (either one of those might not
be present) then restarting your admin server (on Unix run
"stop-admin" then "start-admin"; on NT go into the Services
control panel and stop/start the "Netscape Administration" or
"Netscape Admin Server" service). You will then be able to get
back into the admin server, where you can then try new settings
for your host and address restrictions if you wish.

<LI> If you have forgotten the password to your admin server and now
you can't log into your admin pages, all is not lost! Go into
your "ns-home" directory, and into the "admserv" directory under
that. You should find an "admpw" text file containing a simgle
line of text, something like this:
admin:lnOVeixulqkmU
The first part of that line is the name of your admin account
(usually just "admin"), and the second part is your admin
password, encrypted. Edit this file to remove the encrypted
password so that your file looks like this:
admin:
Then shut down your admin server, bring it back up again, and log
into your admin server but don't give any password. It should let
you in, at which point you can then go to the appropriate
configuration page to set a new admin password, and then you're
back in business.
</OL>
Note that because it is so easy to change the admin password this
way, it's good to periodically make certain that your admin
password file and your web server's configuration files are not
left world-writable, and that only trusted people have access to
them. (By default they're not world-writable, but it's good to
make sure of this from time to time.)

If you mean that yu forgo the password for yur encrypted backup then you can only:
Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device.
Above from:
http://support.apple.com/kb/HT4946

From report server database how to know reporting services server

from report server database how to know reporting services server
Thanks

Hi Ajay,
If I understand correctly, you want to know
Reporting Services server name based on report server database. Based on my research, I find that the Reporting Services server name is the computer name which install the report server. So we can try to click Start button, right-clicking Computer,
and then clicking Properties. Under Computer name, domain, and workgroup settings, you can find your computer name.
Besides, the report server database is a SQL Server database that stores the following content:
Items, Subscription and schedule definitions, Report snapshots and report history, System properties and system-level security settings, Report execution log data, Symmetric keys and encrypted connection and credentials for report data sources.
For more information about report
server database, please refer to the following link:
http://technet.microsoft.com/en-us/library/ms156016.aspx
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine xiong
Katherine Xiong
TechNet Community Support

How to change daemon (service) start order by systemd?

how to change daemon (service) start order by systemd? I want getty start after all other service have been started.

hoanglan87 wrote:If you do that, you'll not see services messages when booting.
That's the whole point. Once your system's working fine, you don't need to slow your boot down with those messages. You can always get them back by hitting the "e" key (with Grub) and editing the kernel boot line. Unless you've set your time-out to 0, which is probably not a good idea for most of us. Those service messages don't seem to be logged anywhere (although, there's lots of other logging you can enable). Anyway, we're thread-drifting here, sorry.

How to change "No Password required" for Guest to "Yes"account under Somarsoft Dumpsec

Check Content:
Verify all accounts require passwords.
Run the DUMPSEC utility.
Select "Dump Users as Table" from the "Report" menu.
Select the following fields, and click "Add" for each entry:
UserName
SID
PswdRequired
AcctDisabled
Groups
If any accounts have "No" in the "PswdRequired" column, this is a finding.
Some built-in or application-generated accounts (e.g., Guest, IWAM_, IUSR, etc.) may not have this flag set, even though there are passwords present. It can be set by entering the following on a command line: "Net user <account_name> /passwordreq:yes".

Hi Malik,
How to change "No Password required" for Guest to "Yes"account under Somarsoft Dumpsec
Please contact SystemTools Technical support to get more efficient support regarding this matter:
http://www.systemtools.com/support.htm
http://www.systemtools.com/toolboard/
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to change the sysadmin password for maintenance wizard if you have forg

How to change the sysadmin password for maintenance wizard if you have forgotten the password and can't log in.

Log into SQL*Plus as the $EOFUSER and do:
update eof_user set password = 'passwd_you_want' where user_id = 0;
commit;
-Vikki
Product and Development Manager for Maintenance Wizard

How to change the Display Pattern for Decimal Fields dynamically

hi all,
Can any one help me how to change the display pattern for decimal fields dynamically???
Currently I am using z,zzz,zzz,zz9.999 Display pattern for Quantity Field. If the value is blank it is displaying as 0.000 on the Screen. But I don't want this to be printed.
Please help me how to solve this ASAP.
Thanks,
Prabhu

Hi,
Alternatively you can handle it in the context.
In the context area, click on the quantity. In the bottom, click on the conditions tab, and put a condition
<quan field> NE initial.
So the field will not be printed if there is no value.
Regards,
Vidya Chowdhary A.

How to change the package name for a msg class

Can anybody tell me how to change the package name for a message class.
and how will it effect in the rerport?
thanks in advance
kp

>>and how will it effect in the report?
You wouldn't see any direct effect on the Report.. But if you transport the report to QA & leave the Message class in Dev, it might result in syntax issues & you will not be able to execute the report. Just ensure that both of them get transported to QA & you will be fine.
~Suresh

How to create a service call for more then one item

Hi All,
How to create a service call for more then one item. i.e. the service call should be logged for more then one item

As you noticed this is not possible by design.
Maybe you could have a dummy item for that purpose and register the real items to be handled in a UDT...
HTH

I need to know how to size a media server for 800-1200 user

i need to know how to size a media server for 800-1200 user

Please clarify what you mean. Do you already have an iPhone? If so, and it came from the US and is (presumably) carrier locked, you're out of luck. NONE of the US carriers will unlock iPhones. There are no exceptions.
The unlocked iPhone 4S is not yet available in US Apple retail stores. All phones sold at retail in the US are currently carrier locked.

How to change the web server??

How to change the web server in the details of the mobile application component in the MI webconsole??

hello irene,
had your tried checking on the "Use IP instead of host
name" checkbox?
to edit your registered application info, go to
"Upload Mobile Component" tab and click on the Edit icon
on the left part of the record list which corresponds to
the application you had just uploaded.
your application is uploaded to the same host as your
web console application is running on. if you like to
point it to a different server where you have your
archive accessible, you have to change your mcd
deployment attributes on your middleware. try the ff:
1)run tcode: mi_mcd
2)click on Create Mobile Component
3)Enter Mobile Solution Name and Version
4)Click on Display MCD
5)Select Deployment Tab
6)Click on Edit
7)Change the values of WEBSERVER and WEBPATH location eg.
if your archive is located at
http://myotherserver:80/archive/myapplication.war
your entry will be:
WEBSERVER: http://myotherserver:80
WEBPATH: /archive/myapplication.war
where you myotherserver is the name of your http host
server and myapplication.war is the name of your archive.
the archive directory is just a virtual directory where
your application archive is.
you might need to change the port number depending on
your http server port.
regards
jo

How To Change Root Folder Reference for href - anythingslider links?

How To Change Root Folder reference for href - anythingslider links?
My root folder in Web Apps>Carousel in admin is set at /carousel/ (http://bestinscotland04.businesscatalyst.com/carousel/slide-2 - as an example) but I want it to link to a specific page at the root level (specifically /scottish-menswear/mens-highland-kilt-outfit).
I can't find the controls, css, or html file to enable my picture to link to this product page.
I'm sorry for the amateur question - I've never had formal training and it's always a reverse-engineering situation with me.
Thank you.

One way to address this is to use the Virtual Web Host feature.
I've uploaded a simple application note to help guide you through the steps.
An alternative would be to create an html at /Web/ which forwards to /Web/Joomla. Not a great solution, I know.
I'm sure there is a way to change the setting in a linux configuration file, but I don't know which file that is in. Maybe some other linux savy community members could help out with that?

How to Change Analysis Services Server for Power View

Similar Messages

Maybe you are looking for