How to change apps,applsys,applsyspub and alloracle in 11.5.10.2

Hi,
How to change apps,applsys,applsyspub and alloracle in 11.5.10.2.
Thanks
Siva

siva,
check
Re: how to use FNDCPASS utility
fadi

Similar Messages

How to change data source name and context root during deployment

Hi,
Env:
WLS 10.1.3
JDev 11.1.1.6
Hudson
I need to deploy two instances of my ADF application on the same development enviroment. We are using Hudson to deploy. My question is how to change data source name and application context root before second deployment.
Kuba

I don't believe there is an inbuilt facility to do this.
Previously how I've done this is when checking files out using Hudson jovs, before the build I then use an Ant extension called XmlTask (http://www.oopsconsultancy.com/software/xmltask/) to modify the required XML files.
Can I ask why you're doing this in the first place please? Multi-tenancy? 2 versions of the same app?
CM.

HT2534 How to change app store location on iphone 4s?

How to change app store location on iphone 4s?

Changing App Store Location
NOTE: Your App Store account location, your iTunes account location, and your Apple account location are all the same thing. In other words, if you change the location of one of these accounts, the change will be applied to all accounts (actually it'll be applied to just ONE account, since they're the same and all, but you know what I mean).
STEP 1 - Open the App Store app.
STEP 2 - Select the "Featured" tab at the bottom.
STEP 3 - Scroll down to the bottom of the page and select "Apple ID: [email protected]".
STEP 4 - Select "View Apple ID".
STEP 5 - Insert your password and select "OK".
STEP 6 - Select "Country/Region".
STEP 7 - Select "Change Country or Region".
STEP 8 - Select your desired country from the list. NOTE: If your country is not listed alphabetically, scroll to the bottom of the list where you'll find it written in original form (for example, Japan is listed at the bottom as "日本"). Then click "Done" and "Next".
Finally, input your billing information. If you do not have a credit card connected to a bank account created in the country you selected, IT'S OK! Just select none in the credit card section. As long as you have a workable address, you're good to go.
*****As of this post, Apple has set no limit to the number of times you can switch your account back and forth between countries.*****

How to change app store location

how to change app store location

Changing App Store Location
NOTE: Your App Store account location, your iTunes account location, and your Apple account location are all the same thing. In other words, if you change the location of one of these accounts, the change will be applied to all accounts (actually it'll be applied to just ONE account, since they're the same and all, but you know what I mean).
STEP 1 - Open the App Store app.
STEP 2 - Select the "Featured" tab at the bottom.
STEP 3 - Scroll down to the bottom of the page and select "Apple ID: [email protected]".
STEP 4 - Select "View Apple ID".
STEP 5 - Insert your password and select "OK".
STEP 6 - Select "Country/Region".
STEP 7 - Select "Change Country or Region".
STEP 8 - Select your desired country from the list. NOTE: If your country is not listed alphabetically, scroll to the bottom of the list where you'll find it written in original form (for example, Japan is listed at the bottom as "日本"). Then click "Done" and "Next".
Finally, input your billing information. If you do not have a credit card connected to a bank account created in the country you selected, IT'S OK! Just select none in the credit card section. As long as you have a workable address, you're good to go.
*****As of this post, Apple has set no limit to the number of times you can switch your account back and forth between countries.*****

How to change Topic's Icon and show the Print Button

Hi, currently i'm using robohelp html version 8. I have spent quite some time to figure out how to change topic's Icon and show the Print Button in my project. Anyone can help me on this? Btw, i using MX(template) to generate the output with FlashHelp Pro.
Below is the screenshot for clearer clarification:
Thanks.

We would have told you if there was.
Sorry but a downside of FlashHelp is that your customising options are limited.
See www.grainge.org for RoboHelp and Authoring tips
Follow me @petergrainge

HT201303 how to change a security question and answer

how to change a security question and answer

Sam ,
I do have the same problem !!
How to solve it ?
Plz

My podcast has been approved, how do change my cover art and add an author?

My podcast has been approved, how do change my cover art and add an author? I would appreciate any help
Thanks

In whatever method you are using to create your podcast there should be a place where you originally placed the image or its URL, and you can just replace this with a new one (which needs to have a different filename from the original). Similarly there should be a place to enter your name so that it goes in the 'itunes:author' tag.

How to change app store country location in iphone 4s with ios 7.0.3

how to change app store country location in iphone 4s with ios 7.0.3

Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region...change here.

How to change App Store country

How to change App Store country

Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region...change here.

How to organize apps into folders and make them stick in iphone 3gs?

Four hours down the drain! Darn, I decided to finally learn how to organize my apps into folders and do it right. Instead I spent four hours and must have got it wrong.
I opened iTunes on my MacBook with my iPhone attached. Then clicked on the iPhone in the left side list of my iTunes. Then clicked on apps which brought up a nice page with all my iPhone apps listed in one window on the left and all the pages of the apps that are on my iPhone in the window on the right. So far this is what I think the User Manual and Help said to do.
At that point I created new folders by dragging one app over another. For example, I would find a photography app and drag it onto another photography app. That automatically created a folder with the name photography. Just what I wanted. I then looked for more photography apps and dragged them to the folder.
This is not too easy because I had eight pages of apps. At first, I would grab an app on a page and drag it to where I knew the corresponding folder would be and put it into the folder.
Later I found another way was to use the list of my apps on the right to put them in apps.
In the end, from what appeared on the screen, it seemed to me that most of my apps were in folders and the folders were either on page one, two, or three. At that point I thought that I should sync the MacBook with the iPhone, I believe, and did so.
When the sync was finished I took the iPhone off the computer and looked at it. NONE of the folders I created, nor the organization into folders of the apps were on my iPhone!
Obviously, I did something wrong since the same mess was on the iPhone as before, with apps all over the place and impossible to locate without taking too much time. This after four hours of work looking at a 13 in. laptop screen!
What I hope is that someone smarter than me will look at what I did and tell me where I went wrong.
I want the apps on the iPhone to be organized into logical folders so it is easier to find them. Something along the lines of a good database, you know?
Thank you for reading to the end of this question,

OK, I spent another afternoon doing the job started yesterday. Last night (could not sleep, so might as well think) I got to thinking that I really must have missed a step or something because all my work was done on the Mac and I did not recall any time when I transferred the new setup with folders to the iPhone.
Sure enough, when I tried it today I did find that missing step. When looking at the Home Page of the iPhone or any page being worked on, in the lower right hand corner two buttons say
SYNC APPLY
I do not recall using the APPLY button on the first day trying this, but I used it this time.
After making changes, I hit APPLY and the computer began to sync with the iPhone.
This time, although there is nothing telling the user what is going on, the sync actually makes the iPhone pages to look exactly like the pages created on the Mac.
Too bad the instructions and help did not say to do things in this way, which is the only correct way, as far as I can tell.
I have about 155 apps on the iPhone, making the job extra lengthy. However, I never could do it on the iPhone’s tiny screen, even though it is possible, so this was good - working on the larger screen of the MacBook.
There are also some (undocumented?) tricks in using the MacBook for this task. For example, it is possible to create a folder and then, using the list of all apps on the iPhone that is on the left side of screen, open the folder, click on the check box next to any app you want to put in the folder and it will jump right in!
If the check box already has a check mark, just click the box to remove it, click again to put the check mark in the box and voila the app takes off for the folder. This also works to just put apps onto a certain page, if you want to do that, but dragging apps around sometimes works better.
I hope it will not be necessary to do this again because of the time involved, and he need for quite a bit of thinking on how to move the apps and folders around to get everything just where you want it on the iPhone. The work reminded me of an old kids game that has a small square case with, I guess eleven movable numbers, that are all mixed up, and one space that is not filled with a number. You can move the little squares with the numbers around inside the case to try to line the numbers up in order from 1-11 and do it faster than anybody else.
Well, unfortunately lining up all my apps was like that because each page of the iPhone only holds 16 folders or apps and each folder is limited to 12 apps. Starting with 155 apps it takes too much mouse maneuvering to make the process easy.
Finally, the automatic folder names are very broad, as in MUSIC, LIFESTYLE, SPORTS and such, so I often just deleted the given categories and put my in my own. Also, some day I may break down the folders more because twelve apps in one folder means the apps are still pretty much out of view.
I wrote this in case anyone else finds it and has the same irksome product. If I just reinvented the wheel, please do not tell me now.

How to change the full host and domain name on OS X Leopard...

I recently bought an iMac, and I'm trying to configure it for my network. The question I have is, how can I change the host name and domain name from Skuld.local to skuld.tolharadys.net?
After mucking around with a few searches on Google, I've gotten the domain name to stick since running domainname returns tolharadys.net. Also I can change the hostname as reported by 'hostname' temporarily by running 'hostname skuld.tolharadys.net' in Terminal.app. However, this isn't persistent after reboots. Ideas are welcome.

You would need a DNS server on your network configured to answer authoritatively for that particular subdomain.

How to change my Email address and my home address ?

Hi,
I Create a new account @live.com , I want all my last certifications to be use the new Email address instead of the old one
and also how to change my home address
Last Questions , I want to change my login account on this forums to use the new one so i keep with all my questions and my points in the new login
Thanks.

Hi.
You can change your home address at the Microsoft Profile Center. You will need to log in with one of your Live ID accounts and change here it here:
https://profile.microsoft.com/regsysprofilecenter/infodefault.aspx
As Sathya suggested, you can contact the Microsoft Certified Professional Support staff to move your certifications from the old email address to the new one, here:
MCP support contact information
Telephone: (800) 636-7544
Monday through Friday: 6:30 A.M.–5:30 P.M. Pacific Time
Email: [email protected]
Expect a response within two business days.
Fax: (661) 793-6555
Alternately, you can contact your Microsoft Regional Service Center for Microsoft Learning. Please use the following web page to find the contact information for help.
http://www.microsoft.com/learning/en-us/help.aspx
The page includes email and phone contact information for your geographic location so you can email or call them directly. They will help you get your MCP ID transferred to your new Live ID email account.
NOTE: This public forum is usually monitored by fellow certified IT folks and trainers.
Good luck!
Best wishes, Davin Mickelson

How to change the default look and feel

Hi.
Does anyone knows how to change the default Caspian look and feel to, for example, Nimbus ?
Or the skin feature turns look and feel setting, as We know in java, unnecessary in javafx ?
I´m using javafx 1.2.
Cheers

Canspian is not a look&feel, it's a skin.
Look&feel only change the SwingComponent,
regards.

How to change default close maximize and minimize button in mac?

How can I change default close, maximize and minimize button in mac?

no. but you can make resizable.

How to change the font size and style on run time

dear all
i try to change the font style and font size on runtime. I did the following:
1- i created an item(:font_size) in which i will write the size of the font for the the other item ('customer_name')
2 on the post_change trigger for 'font_size' i write this code
SET_ITEM_PROPERTY('customer_name',FONT_size,(:font_size);
i write 12 then then font size changed , then i write 18 , the size does not change. and when i write any value , no change happens. I do not know why
the second problem is how to change the font style
i made three checkbooks (bold,italic,underline)
on the trugger when_checkbox_checked i write
     IF :BOLD = 'B' THEN
     SET_ITEM_PROPERTY('N_SAMPLE',FONT_STYLE,'BOLD');
     ELSE
SET_ITEM_PROPERTY('N_SAMPLE',FONT_STYLE,'REGULAR');
     END IF;
no change happend at all.
please help

Hi friend,
it's a really really strange tip... May be it's a Forms bug? I've tried with set_item_property..and.. you're right, it doesn't work..
So.. you can try making this:
- create a visual attribute with an specific font size....
- use the
SET_ITEM_INSTANCE_PROPERTY('block.item',CURRENT_RECORD,VISUAL_ATTRIBUTE,'you_visual_attribute');
and call it from psot-change....
It works
Hope it helps,
Jose.

How to change apps,applsys,applsyspub and alloracle in 11.5.10.2

Similar Messages

Maybe you are looking for