How to change build order in Keynote

I've imported an existing Keynote file from my iMac to iPad2. There were some pics in the original file which went missing after importing into iPad2. I've then deleted the missing pics in the slides, and tried replacing them in iPad2. However I could not reorder the "Build In."
Plus, why did the pics go missing in the first place? Does it thus mean that in order to reinstate these pics, I've to import them into iPhoto on my iMac and then sync them with iPad2? Some of the pics were from Photoshop, and some downloaded from the Internet, which I've dragged-and-dropped to the original Keynote file.
Looks like the Keynote version for iPad2 still requires some further tweaking to give it that impressive look as per the Mac version.
Any advice/suggestion?
Thanks in advance.

You can't set a default font.
Instead use a custom slide master with the font you want to use.

Similar Messages

How to change default fonts in Keynote?

How to change default fonts in Keynote?

You can't set a default font.
Instead use a custom slide master with the font you want to use.

How to change purchase order's cost center in batch

Dear all :
how to change purchase order's cost center in batch?

Dear Manish :
thanks so much for you reply.
the filed which i wanted to change it's content is cost center (KOSTL) in table EKKN.
i couldn't find it in this t-code when i select fields.

How to change the order of albums iOS 8?

I recently upgraded from an iPhone 5 to a 6 Plus. Everything is fine except for the fact that some of my music is in the wrong order. There are some groups that released multiple albums in the same year, and I would like them to be in the order of when they were released. On my 5 I was able to put them in the right order by going on a computer, changing the sorting, then update iTunes Match to have it change on my phone as well. (example; group came out with album "1" and "2" same year and it defaults to "2" first, then "1." I was able to change it on the iPhone 5 to be in the right order by changing how they are sorted from my computer but that doesn't work on the 6 Plus.) I would like to order it where it goes top to bottom, with the newest on top going down. How would I do this?
Thanks

Hi Jason,
How to change the order of tables within sheets
Make a table active by clicking in it once to select that table, then drag it by the 'bullseye' (top left, I have placed a red circle to show the bullseye):
After dragging the table down:
Table 1 is now below Table 2.
The blue line is an Alignment Guide
Two types of Guide:
1. Menu > View >Show Rulers. Drag Alignment Guides from a ruler to where you want them.
2. Menu > Numbers > Preferences > Rulers > Alignment Guides. Turn on (tick) both guides. That allows you to align objects with *each other* (as well as with the ruler guides). These guides help to align objects left, middle, right, top, bottom.
Alignment Guides do not show unless you are moving an object.
to drag/move table to another sheet in the one file
Not possible in Numbers 3. The Sheets Pane has gone. Instead, select the entire table (click once in the table to make it active, then click on the bullseye). Copy (or Cut if you are brave). Go to another Sheet and Paste.
Also can you change the size of sheet tab width on tab toolbar, so I can see more sheets at once??
No. Let's hope this will be added in future updates. However, you can drag a Sheet tab left or right to reorder them.
Another tip: each Sheet tab shows the contents of that Sheet, with some options such as Duplicate and Delete:
Regards,
Ian.

How to change the order of download options as per our convience in obiee

hi frineds,
How can i change the order of the download options in obiee dashboard ?
like if you press download option you see
download to excel
download to excel 2000
download data
download webpage(mhtml)
how to change this order.????????

The download options are setup in OracleBI\web\msgdb\messages\viewscontrolmessages.xml
- Search for the tag *<WebMessage name="kmsgEVCDownloadLinks">* that contains the download links within the hyperlink tag
- Each hyperlink tag is a download option
- Reorder as you require
- The actual text that gets displayed as a link can also be customized by editing the entry for a message such as kmsgEVCLinkDownloadExcel in the OracleBI\web\msgdb\l_en\messages\viewmessages.xml [the customization is locale specific]
- Restart the presentation server

How to change page order in Acrobat Porfolio?

How to change page order in Acrobat Porfolio? In older versions it use to be much easier to drag and drop the page order. I don't see any menu options on arranging the pag order. Any ideas? Thanks.
I would post a screenshot but they have been disabled on these forums.

You should ask in the Reader forum. But my guess is that Reader there is nothing you can do. Acrobat allows you to move pages around, but not Reader.

How to change display order

All,
I had created a Line chart graph with three measures (Total Employees, Total Promotion and Total Hires) for last 12 months. Chart legend is displaying this order, Total Employees, Total Promotions and Total Hires. But my requirement is , Legend supposed to be display this order, Total Hires, Total Employees and Total Promotions. How to change this order in Graph?

Hi
Pull up a Column and click in the fx and there write the below formula
Case when column Type ="Total Hire' then '1'
when column Type = 'Total Employee' then '2'
when column Type ='Total Promotion' then '3'
else null end
Then sort the column in asc order and then hide the column
You will find that the original measure column is sorted as required
Regards
Debo
Edited by: Debo Roy on Sep 8, 2010 8:03 PM
Edited by: Debo Roy on Sep 8, 2010 8:21 PM

How to change the order of users in appearance of login screen?

Hello!
Because we often switch to a user,
which is listed last in login screen,
we want move them to the second place.
How to change the order of users in appearance of login screen?
Thank you for a tip
Erhy

The order users show up on the login screen is the way they are ordered under the
C:/Users directory. This is usually alphabetical, AFAIK there is no other way to change the order other than to change the username to something that starts with a letter that will be higher alphabetically.

How to change the order of the fields in the queryoutputnode in OVS.

How to change the order of the fields in the queryoutputnode in OVS.

The actual requirment is to re-arrange the elements of the queryoutput node, to look more organised
say for ex.
Seq 1:
c code company name g/l ac g/l ac description
Seq2 :
g/l ac description c code g/l ac company name
Seq 1 way of representation is more organised that Seq2. How can we achieve this re-arranging of ordering in the queryoutputnode.

How to change to order of sorter

If I use Move up/down column
the list page will order by ascending by the sort field, that mean the latest data will be in the last page, therefore I want to change the order
I found some code seems related to the sort function
$tso_listdrama_ship_main1 = new TSO_TableSorter("rsdrama_ship_main1", "tso_listdrama_ship_main1");
$tso_listdrama_ship_main1->addColumn("drama_ship_main.sm_sort DESC"); // Order column
$tso_listdrama_ship_main1->setDefault("drama_ship_main.sm_sort DESC");
$tso_listdrama_ship_main1->Execute();
// Defining List Recordset variable
$NXTSort_rsdrama_ship_main1 = "drama_ship_main.sm_sort DESC";
if (isset($_SESSION['sorter_tso_listdrama_ship_main1'])) {
$NXTSort_rsdrama_ship_main1 = $_SESSION['sorter_tso_listdrama_ship_main1'];
I add DESC after all the sort field, but it's not work.

Hi Jason,
How to change the order of tables within sheets
Make a table active by clicking in it once to select that table, then drag it by the 'bullseye' (top left, I have placed a red circle to show the bullseye):
After dragging the table down:
Table 1 is now below Table 2.
The blue line is an Alignment Guide
Two types of Guide:
1. Menu > View >Show Rulers. Drag Alignment Guides from a ruler to where you want them.
2. Menu > Numbers > Preferences > Rulers > Alignment Guides. Turn on (tick) both guides. That allows you to align objects with *each other* (as well as with the ruler guides). These guides help to align objects left, middle, right, top, bottom.
Alignment Guides do not show unless you are moving an object.
to drag/move table to another sheet in the one file
Not possible in Numbers 3. The Sheets Pane has gone. Instead, select the entire table (click once in the table to make it active, then click on the bullseye). Copy (or Cut if you are brave). Go to another Sheet and Paste.
Also can you change the size of sheet tab width on tab toolbar, so I can see more sheets at once??
No. Let's hope this will be added in future updates. However, you can drag a Sheet tab left or right to reorder them.
Another tip: each Sheet tab shows the contents of that Sheet, with some options such as Duplicate and Delete:
Regards,
Ian.

Sb CS4 multi-track file how to change track order

I can't figure out how to change the order of the tracks in my multi-track file. Can anybody advise? Thanks.

Thanks for checking. BTW are you using CS4 or CS5? I wonder if that has been added in the new version. I might install the trial version to see.

Anyone know to change slide build order in Keynote?

I am using Keynote on ipad
I have a slide built from four objects and I want to change the order that they appear. I can get to the dialogue box which shows the order but haven't found a way to change it.

you will tap and hold on the slide in side bar you wish to promote or demote, and slide it above or below the frame you wish to promote/demote.

How to change Service order quantity using BAPI/FM

Hi All,
Can any body tell me how to change the Service Order quantity (in IW32) using a FM or a BAPI.
I tried using the BAPI: BAPI_ALM_ORDER_MAINTAIN but I am unable to change the quantity. May be I might be missing some parameter. If anybody has done this please let me know the parameters that needs to be passed or if there is any other way out.
Points will be rewarded to useful answers!!
Thanks,
Susanth.

Hi!
I have used this BAPI.read the documentation properly and after calling this bapi call BAPI_TRANSACTION_COMMIT then only expected results com n get saved.
for ex:
call function 'BAPI_ALM_ORDER_MAINTAIN'
    tables
      it_methods              = itab_methods
      it_header               = itab_header
IT_HEADER_UP            =
      it_header_srv           = itab_header_srv
IT_HEADER_SRV_UP        =
      it_userstatus           = itab_userstatus
      it_partner              = itab_partner
IT_PARTNER_UP           =
      it_operation            = itab_operation
IT_OPERATION_UP         =
      it_relation             = itab_relation
IT_RELATION_UP          =
      it_component            = itab_component
IT_COMPONENT_UP         =
      it_objectlist           = itab_objectlist
IT_OBJECTLIST_UP        =
      it_olist_relation       = itab_olist_relation
      it_text                 = itab_text
      it_text_lines           = it_text_lines
      it_srule                = itab_srule
IT_SRULE_UP             =
      it_tasklists            = itab_tasklists
      extension_in            = itab_extension_in
      return                  = itab_return
      et_numbers              = itab_et_numbers
call function 'BAPI_TRANSACTION_COMMIT'
   exporting
     wait          = 'X'
IMPORTING
RETURN        =
reward points if helpful.

Report Painter: How to change the order of lines in selection screen

Dear Gurus on Report Painter,
how can I change the order of the lines (where the values for the variable selection of my cost center report are entered) in the selection screen of a report painter report? The Selection screen looks awful.
Is there also a possibility to add another description to each line of the selection screen?
Thank you very much for your advice.
Best regards Timo

I am afraid you have much choice in choosing the order of the selection parameters. However, with the developer's access you may.
This is how!
Step 1: If it is a standard report, copy to your own report. and assign it to a report group. and execute.
Step 2: When you execute, and the selection appears, go to systems>status and here , copy the program name (it may look something like GP46LP6VEDORBSA2IHWYSR4TL58020)
Step3: Go to SE38 and enter the above derived program name with a view to re-arrange the line withing the program, with reference to selection parameters.
For example: I have a selection screen in the following order:
Controlling area
Fiscal Year
From period
To period
Plan version
Cost center group
Or value(s)
Cost element group
Or value(s)
The corresponding program that drives this order is in the program and would look like this,
SELECTION-SCREEN BEGIN OF BLOCK VALUE_SELECTION
 WITH FRAME TITLE TEXT-003.
 PARAMETERS: $1KOKRE LIKE CCR1S-KOKRS .
PARAMETERS: %1KOKRE LIKE CCR1S-KOKRS MODIF ID IN4.
 for controlling area
PARAMETERS: $1GJAHR LIKE COSP-GJAHR .
PARAMETERS: %1GJAHR LIKE COSP-GJAHR MODIF ID IN4.
 for fiscal year
PARAMETERS: $1PERIV LIKE COSP-PERBL .
PARAMETERS: %1PERIV LIKE COSP-PERBL MODIF ID IN4.
 for period from
PARAMETERS: $1PERIB LIKE COSP-PERBL .
PARAMETERS: %1PERIB LIKE COSP-PERBL MODIF ID IN4.
 for period to
etc.
PARAMETERS: $1VERP LIKE COSP-VERSN .
PARAMETERS: %1VERP LIKE COSP-VERSN MODIF ID IN4.
PARAMETERS: $1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4 .
PARAMETERS: %1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4.
SELECTION-SCREEN END OF BLOCK VALUE_SELECTION.
......... set variables ..............................................
SELECTION-SCREEN BEGIN OF BLOCK SET_SELECTION
 WITH FRAME TITLE TEXT-004.
PARAMETERS: $1KOSET LIKE RKSB1-KSGRU.
PARAMETERS: %1KOSET LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KOSET FOR CCR1S-KOSTL .
PARAMETERS: $1KSTAR LIKE RKSB1-KAGRU.
PARAMETERS: %1KSTAR LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KSTAR FOR CCR1Z-KSTAR .
SELECTION-SCREEN END OF BLOCK SET_SELECTION.
If you want fiscal year to appear first, you try just copying the coding relating to fiscal year just above the coding for Controlling area.
Extend the same logic for what you may want to get.

How to change the order of the tabs in featured news?

Hi,
I use the 'Featured News' widget on my company website and it has 10 tabs. The newest item is at the top but when I add a new tab it goes to the bottom and I can find no way of changing the order of the tabs so that everytime I add new news I have to copy each tab and it's content down one place in order to get an empty tab at the top to put the new news item in. This takes an unneccesssarily long period of time. Can someone please let me know if there is an easy way to change the order of the tabs?
Thanks very much ;0)
Justine

Just click on the title tab until it is isolated (one click before the text is highlighted) and move the tab to the position you want.
Thanks for your reply. I've done this in the past but found that the position of the tab in terms of it's place in the hierachy doesn't change so if I move the top tab down one, the way you've described and then upload the page I find that the second tab down (which was the first previously) displays first. How can I change the 'position of the tabs interms of their hierachy in the widget?
Thanks again
J

How to change build order in Keynote

Similar Messages

Maybe you are looking for