How to change 'captured' display name?

How can I view, and more importantly edit, a 'captured' display name?
I can view and change the display name I made for the contact entry in the address book, but cannot view, much less edit, the 'captured' display name (I looked at the address book using 'Notepad' and can see the entry of the 'captured' display name).
This causes problems when I start entering the person's name since the 'captured name' often shows up.
Scenario:
(1) Person's name = John Doe; Original email address = [email protected]; First message received from original email address had a 'captured'/'sent' display name of 'John Doe'; I created and edited the contact entry / address card and explicitly entered 'John Doe';
(2) Person now has a new primary email address = [email protected], but wants to keep original email address; With the new, primary email address, I edited the original contact entry / address card and change the display name to 'John Doexx' (keeping the original email address); I created a new contact entry / address card with a display name of 'John Doe' and entered the new primary email address.
(SITUATION) When I create an email message and start to enter the name 'John Doe', several names are listed. In sequence, the consists of the first (i.e. 'original') address card up with the display name of 'John Doe', then the second ('new') address card with the display name of 'John Doe', and then the 'original' address card (again) with the display name of 'John Doexx'.
Bottom line, I need to change the 'captured' display name for the first address card so it matches the display name I entered. Alternatively, TBird should ignore 'captured' display names if a display name is explicitly entered.
P.S. This questions/issue does not involve a concern about the name actually displayed in the message, although that too should be addressed.
Jim

Jim
In the '''address book''' click on the '''contat''' then right click choose '''properties''' that page where you in put the mane of the contact and email address there is a check box which when checked '''Always prefer display name over message header''' Try this and let me know if it works

Similar Messages

How to change your displayed name

How do you change your displayed name in iCloud? I have tried changing the settings and I also update my Apple ID profile, but iCloud still displays my old name.
The name displays in the upper right hand corner and is always displayed, even if you select Calendar, Contacts, Mail, Notes, etc.
Any help would be appreciated.
Thank you!
JRinSanDiego

Just had this problem myself. All you have to do is visit https://appleid.apple.com/ . Log in and you can edit your info. Best luck!

How to change the display name

How do I change the display name I chose?

Anyone came here, refer to this post.
http://h30499.www3.hp.com/t5/Community-Feedback-Suggestions/change-of-display-name/m-p/6667672/highl...

How to change the display name for Gmail aliases?

I have a Gmail account with multiple aliases. They look like this:
Joe User <[email protected]> (Primary)
Support <[email protected]> (Alias)
Billing <[email protected]> (Alias)
Works great. I'm trying to set up Apple Mail on my new MacBook to support the aliases as well. I am able to input the e-mail aliases, but the display names for all are 'Joe User' which defeats the purpose of having the aliases.
I have to imagine I can do this. Can someone help me out?
Regards,
Dave

Anyone came here, refer to this post.
http://h30499.www3.hp.com/t5/Community-Feedback-Suggestions/change-of-display-name/m-p/6667672/highl...

How to change the displayed name of a DefaultMutableTreeNode

Hi there...
I created a class A extending DefaultMutableTreeNode and A's constructor is as follows:
public A(UserObject object) {
setUserObject(object);
so my problem is if I wanna add such an instance of A, in a tree (as a node) the displayed name is very strange, something like:
A@72834 or stuff...
How can I change the name afterwards??
are there any commands to do so?
I have created object of class which contain some data. when I setUserObject to node then tree display's like A@72834 or stuff.
Here I required object data whenever I get node. how can I solve this problrm.

Override the toString method in the class of the user object.

How to change my display name on Skype for Android...

I want to change my Skype display name and don't have access to a computer, just my Nexus 9. Can I do it?

Hi, satanfiras, and welcome to the Community,
Skype does not permit an account name to be changed once it is created. More information regarding changing a name as it is displayed can be found here:
https://support.skype.com/en/faq/FA110/can-i-change-my-skype-name-or-display-name-in-skype-for-windo...
The article is also customized for Mac.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

How to change the display name in the filter view

Hi,
I have one column "*Year*" and type in case when 1=2 then "product_d"."name" else "calendar_d"."year" end.
I add a filter view for it. but when I select, like 2010, it will display"case when 1=2 then "product_d"."name" else "calendar_d"."year" end" is equal to 2010.
So how can I change it to "Year is equal to 2010"?
Any one have any idea about this?
Regards,
Anne

anne wrote:
Hi David,
About your confuse about"case when 1=2 then "product_d"."name" else "calendar_d"."year" end".
You can try in your locale.
You will find they are different.
BASED ON THAT you have two table product_d and calendar_d AND they are related by one Fact table.
THEN When you type in
"case when 1=2 then "product_d"."name" else "calendar_d"."year" end"
AND
"calendar_d"."year",
IT WILL SHOW U TWO different RESULTS.
I need to show year which its related product is not null. but I cannot use SHOW->SQL RESULTS->TYPE SOME "WHERE..." because I also need to use "constrain"..
That why I choose to use a case when function..
So, do you have any idea about this?
Regards,
AnneWhy not use two filters in your request? Have something like this:
product_d.name IS NOT NULL
AND
calendar.year IS PROMPTED?
...instead of using a CASE statement? This way you can have both filters show the way they should in a meaningful way.

How do I change my display name?

Please walk me through changing my display name.

Glad to ... please note, I am a Win7 PC, so if you use any other operating system or device, what I am about to descrobe here could be very different as the Skype client software works and displays differently depending upon the platform.
At the top of the contacts list, click Skype -> Profile -> Edit your profile -> click your mouse over the name which appears beside your picture or at the top of this screen. Delete the text and type what you wish to appear - please note, this will appear both in your public profile and to your contacts. When you are finished editing the text, click the check mark beside the box.
Just above your name and above your picture or avatar, you may click on the Public profile or Contacts only buttons to review what will be seen either publicly or to your contacts only. Clicking the Edit button will take you back into the screen where you can make changes to your settings.
You will see at the end of several lines the words "private," "contacts only," or "public" in grey type. These are default settings where this information can be viewed and which said default setting can not be changed. If there is a drop-down box with a choice, you can decide where that information is displayed depending upon what the options are in that drop-down box.
Done!
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

How to chage the display name in SC browser for the custome fields?

Hi,
I created 2 custom fields for Shopping cart in SRM. How to chage the display name in SC browser for this custome fields?
Thanks
Kevin

Hi Kevin,
when you have defined your customer fields, you have created new fields in the CUF structures. The labels displayed on the SC screen come from the data element you have assigned to those cust fields in the include structure.
If you have used a std data element, then you can change its translation (attention, this will impact all structures, tables... abap objects using this data element).
If you have created a Z data element, then adapt its description accordingly.
Rgds
Christophe
PS: please reward points for helpfull answers

Change column display name

Hi,
How can one change the display name of a column.
For example I have columns C_ProjectID which when display in view should appear "Project ID". I tried to play with FieldRef but somehow it doesn't reflect the change on page.
What I am missing here? Below is the schema from Sharepoint designer.
Thanks in advance.
Regards,
Abdul
                <ViewFields>
                    <FieldRef Name="TISImpact_x0020__x0028_Yes_x0020" DisplayName="Impact (Y/N)"/>
                    <FieldRef Name="C_Title" DisplayName="Title"/>
                    <FieldRef Name="C_ProjectID" DisplayName="Project ID"/>
                    <FieldRef Name="TBP"/>
                </ViewFields>

Hi,
To change the column name, you can simply select the field name from the ListSettings page and change its title /column name to the desired name. Note:the internal name of the column will still remain the same.
Secondly, you can also do this progrmatically too :
using (SPSite site = new SPSite("http://site"))
using (SPWeb web = site.OpenWeb())
web.AllowUnsafeUpdates = true;
SPList sampleList = web.Lists["ListName"];
// Imp Step
SPField title = sampleList.Fields.GetFieldByInternalName("C_ProjectID");
title.Title = "Custom";
title.Update(true);
sampleList.Update();
web.AllowUnsafeUpdates = false;
You can change the display name via Sharepoint Designer bu clicking on the list -> list settings -> click on "Edit list columns" under cutomizations > select the column and right click and select rename.
Hope this helps
Regards,
Priyanka

How to change image display of my podcast page in iTunes?

How to change image display of my podcast page in iTunes?

As far as I understand you need to update the image's link in your RSS XML file. Be sure to change the link file name even if it links to a different image.
The XML files associated with podcasts are checked for changes every 24 hours so don't expect this to happen instantly.

How to change external display resolution WITHOUT clicking "CONFIRM"?

I have a somewhat unusual situation. My MacBook laptop is actually now a ModBook (a pen-tablet computer), and as such I no longer have a trackpad attached to it. All of my inputs are via the stylus, tapping directly on the built-in display.
This works perfectly fine, except when I need to give presentations on an LCD projector (which is quite often lately). I like to use the projector as an external monitor, so that I can run the Keynote presentation on it while using my laptop screen as the presenter's display, with the upcoming slide, etc. If the projector doesn't give me an ideal native display option (sometimes, the aspect ratio for the 3 or 4 resolutions available in the Displays drop-down in the menubar turn out to be stretched or squeezed), then I, naturally, have to open the Display System Preferences and try out different resolutions.
The problem is, since my stylus only interacts by clicking directly on the built-in-display, I have no way of moving the cursor over to the external display when the dialog box with the "Click here to confirm change/You have 15 seconds..." message appears. So I can never click it ... so I can never confirm the new settings.
The workarounds I've used so far are:
- Mirror displays (not ideal, as I need the presenter preview of the next slide)
- borrow a mouse from someone (usually from a Windows desktop, frankly) and plug that in to briefly mouse over and click the confirm button
I'd love to find a software workaround that allows me to NOT mirror displays and also doesn't require me to carry around a mouse all the time (my laptop bag is already overstuffed...).
Thanks.

Fateh wrote:
I hope that my question is clear ... Nope.
How to change the display resolution of APEX ??APEX doesn't have a display resolution. "Display resolution" is an attribute of the device and user agent software used to view the APEX page.
What do you mean by "the display resolution of APEX"?
In other word, if an end user sees large elements on a pageWhat "large elements"?
then he/she zooms it outHow?
"Zooms" what—the entire page or a single "large element"?
How can I set a proper ZOOM for my app by default ...Meaning what?
And as usual, we're missing:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
You've been posting here for years. You know this basic information is necessary to understand and reproduce problems.
If you're looking for help it doesn't seem unreasonable that you make the effort to provide a full, clear but concise description of the problem or requirement.

I have three email accounts and want to know how to change the display order.

I have three email accounts and want to know how to change the display order.

Install this add on.
https://addons.mozilla.org/en-US/thunderbird/addon/manually-sort-folders/?src=search

How to Change the Alias name for Internet user in SU01 tr code through cod?

Hi Guys,
             My req is we have to change the Alias name(SU01 tr code) for the existing users thru code.So can anybody tell me how to change the Alias name like which we do it in SU01 tr code thru code or FM.?
            Is there any FM for tha changing Alias Name?
Thanks,
Gopi.

Hello Gopi Anne ,
                             You can use the following FM / BAPI :
BAPI_USER_CHANGE
MY_BAPI_USER_CHANGE
For BAPI_USER_CHANGE :
You need to make use of the IMPORT parameter :
ALIAS     TYPE     BAPIALIAS                               User Name Alias
ALIASX     LIKE     BAPIALIASX                               User alias change flag
Thanks,
Greetson

How to change the folder name in the web report.

hi experts,
can anybody give me the solution, how to change the folder name in the web report. any help is appreciated.
waiting for ur favourable response.
thanks
suri

Hi Tony,
Yes, the business requires, only to change in the webreport only not in bex and roles. any suggestions will be helpful to me.
thanks
surendra

How to change 'captured' display name?

Similar Messages

Maybe you are looking for