How to change colors of individual column bar in the same data series

in mac numbers, how to change colors of individual column bar in the same data series. The entire column series gets selected in the column bars and cannot select to change colors of specifc bars.

Hi Kiran,
no its not possible through Theme editor also ,because these colors are coming from Compiler which u are using.
Regards,
Govindu

Similar Messages

How to change font size, maximum column size in the result screen ?

hi All
That's great when using SQL Dev.
But I also have a trouble that how to change font size, maximum column size in the result screen ?
My users think that font in result screen is shown very small, and whenever the data in each colum is long then it's not shown full data in column, they must double click for extend the size. Have the option to default the max size for showing full data in each column ? I try but still not to do that .
Appreciate for anyone to help us.
Thanks all.
Sigmasvn

You can't change the font for the results screen yet, however you will be able to select an auto-fit option for selected columns, so if some columns have slitghtly wider text you'll be able to set the column widths to handle these wider columns.
Also, there s the option of switching the layout of a record in the grid.
Sue

How to increase size of individual column width in the filter screen of WAD

Hello all ,
Have a web application built in WAD. I have ran it in portal and want to put the filter on material.When the filter screen displayed , I selected the filter value on material and added it to selections. I am not able to see the full description of the material due to the width of the column is less which is hided to drag. Do we have any option to increase the individual column width in filter screen?
Request you to respond .
Regards,
Lakshmi.

Hi Vijay,
Iam doing fine .Thank you.
We tried different options in WAD . still it is not working . once the filter screen displayed in your report result (Portal) ,it will show you two tabs screen , will select and transfer the selections from left had side to right hand side.iam able to drag the left tab but not the right one due to iam not able to see the full description of info object.By dragging we can increase the full screen size but not the individual tab size.
Regards,
Lakshmi.

How to change blending mode on multiple layers at the same time

I'm using CS5. I have a document with about 70 layers. I would like to change the blending mode to "lighten" for each layer. Is there an easy way to do this?

Photoshop doesn't allow multiple layer editing. That's why the styles are grayed out. Only 1 layer at a time.
What version are you talking about?
CS5 definitely let’s one apply a Style to multiple Layers.
rfcommagere, I don’t know how to make it much clearer:
• set the Blending Mode on one Layer
• with that Layer selected create a Style with »Include Layer Blending Options« checked
• select all other Layers that should have that Blending Mode
• click the Style in the Styles Panel

Change color in alv column

how do change color of a column in ALV.

Hi
The below abap program shows how to change the colour of individual ALV cells /fields. Only a small number of changes are required from a basic ALV grid which include adding a new field to ALV data declaration table(it_ekko), populating this field with the field name identifier and colour attributes and finally adding an entry to layout control work area. These changes are highlighted in bold below.
REPORT zdemo_alvgrid                 .
REPORT ZALV_CELLCOLOR.
TABLES:     ekko.
type-pools: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
CELLCOLOR TYPE LVC_T_SCOL,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
      gd_tab_group type slis_t_sp_group_alv,
      gd_layout    type slis_layout_alv,
      gd_repid     like sy-repid,
      gt_events     type slis_t_event,
      gd_prntparams type slis_print_alv.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform set_cell_colours.
perform display_alv_report.
*&      Form BUILD_FIELDCATALOG
      Build Fieldcatalog for ALV Report
form build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
              I.e. Field type may be required in-order for
                   the 'TOTAL' function to work.
fieldcatalog-fieldname   = 'EBELN'.
fieldcatalog-seltext_m   = 'Purchase Order'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
fieldcatalog-do_sum      = 'X'.
fieldcatalog-no_zero     = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'EBELP'.
fieldcatalog-seltext_m   = 'PO Item'.
fieldcatalog-col_pos     = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'STATU'.
fieldcatalog-seltext_m   = 'Status'.
fieldcatalog-col_pos     = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'AEDAT'.
fieldcatalog-seltext_m   = 'Item change date'.
fieldcatalog-col_pos     = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MATNR'.
fieldcatalog-seltext_m   = 'Material Number'.
fieldcatalog-col_pos     = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MENGE'.
fieldcatalog-seltext_m   = 'PO quantity'.
fieldcatalog-col_pos     = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MEINS'.
fieldcatalog-seltext_m   = 'Order Unit'.
fieldcatalog-col_pos     = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-do_sum      = 'X'.
fieldcatalog-datatype     = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PEINH'.
fieldcatalog-seltext_m   = 'Price Unit'.
fieldcatalog-col_pos     = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
      Build layout for ALV grid report
form build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
gd_LAYOUT-coltab_fieldname = 'CELLCOLOR'. "CTAB_FNAME
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
      Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_callback_top_of_page   = 'TOP-OF-PAGE' "see FORM
           i_callback_user_command = 'USER_COMMAND'
           i_grid_title           = outtext
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
           it_special_groups       = gd_tabgroup
          it_events               = gt_events
          is_print                = gd_prntparams
            i_save                  = 'X'
           is_variant              = z_template
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
   up to 10 rows
    from ekpo
    into CORRESPONDING FIELDS OF TABLE it_ekko.
endform.                    " DATA_RETRIEVAL
Form TOP-OF-PAGE                                                 *
ALV Report Header                                                 *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
        wa_header type slis_listheader,
        t_line like wa_header-info,
        ld_lines type i,
        ld_linesc(10) type c.
Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
               sy-datum+4(2) '.'
               sy-datum(4) INTO wa_header-info.   "todays date
append wa_header to t_header.
clear: wa_header.
Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
                    into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = t_header.
           i_logo             = 'Z_LOGO'.
endform.                    "top-of-page
*&      Form SET_CELL_COLOURS
      Set colour of individual ALV cell, field
FORM SET_CELL_COLOURS .
DATA: WA_CELLCOLOR TYPE LVC_S_SCOL.
DATA: ld_index TYPE SY-TABIX.
LOOP AT IT_EKKO into wa_ekko.
    LD_INDEX = SY-TABIX.
Set colour of EBELN field to various colors based on sy-tabix value
    WA_CELLCOLOR-FNAME = 'EBELN'.
    WA_CELLCOLOR-COLOR-COL = sy-tabix. "color code 1-7, if outside rage defaults to 7
    WA_CELLCOLOR-COLOR-INT = '1'. "1 = Intensified on, 0 = Intensified off
    WA_CELLCOLOR-COLOR-INV = '0'. "1 = text colour, 0 = background colour
    APPEND WA_CELLCOLOR TO wa_ekko-CELLCOLOR.
    MODIFY it_ekko from wa_ekko INDEX ld_index TRANSPORTING CELLCOLOR.
Set colour of NETPR field to color 4 if gt 0
    if wa_ekko-netpr gt 0.
      WA_CELLCOLOR-FNAME = 'NETPR'.
      WA_CELLCOLOR-COLOR-COL = 4. "color code 1-7, if outside rage defaults to 7
      WA_CELLCOLOR-COLOR-INT = '0'. "1 = Intensified on, 0 = Intensified off
      WA_CELLCOLOR-COLOR-INV = '0'. "1 = text colour, 0 = background colour
      APPEND WA_CELLCOLOR TO wa_ekko-CELLCOLOR.
      MODIFY it_ekko from wa_ekko INDEX ld_index TRANSPORTING CELLCOLOR.
    endif.
Set colour of AEDAT field text to red(6)
    WA_CELLCOLOR-FNAME = 'AEDAT'.
    WA_CELLCOLOR-COLOR-COL = 6. "color code 1-7, if outside rage defaults to 7
    WA_CELLCOLOR-COLOR-INT = '0'. "1 = Intensified on, 0 = Intensified off
    WA_CELLCOLOR-COLOR-INV = '1'. "1 = text colour, 0 = background colour
    APPEND WA_CELLCOLOR TO wa_ekko-CELLCOLOR.
    MODIFY it_ekko from wa_ekko INDEX ld_index TRANSPORTING CELLCOLOR.
ENDLOOP.
ENDFORM.                    " SET_CELL_COLOURS

How to change colors in Auction monitor

Hi Experts,
Could you please help me on below requirement,
In Auction Monitor , need different darker colors for tracking bids because some colors cannot be seen on the screen.
Could you please guide me how to change colors in Monitor.
Thanks,
Pavan.

Hi Vinay.
I would like to suggest a couple of references, quite similar to your requirement,
[SDN - Reference for Different Colors in Single Graphical bar|About Different Colors in Single Graphical bar;
[SDN - Reference for changing colors for graphs|Anyone used colors in VC?;
[SAP HELP - Standard Reference for Assigning Colors to Parts of a Graph|http://help.sap.com/saphelp_nw04/helpdata/en/39/cca358576911d1896f0000e829fbbd/content.htm]
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

How to change color of a button for specific time interval in jsp

How to change color of a button for specific time interval in jsp.
Please help.
Thanks in advance.

This was driving me crazy, too--and the previous answers did not seem to work. I eventually found that if I click one of the data symbols in the graph in exactly the right spot (see below), it selects only the data symbols and not the line. I can tell this because the little selection dots will be around each data symbol, but no selection dots will be on the line between the data symbols - like the graphic in Yvan's answer. Then and only then will the color symbol in the tool bar show the color of the data symbol, instead of the color of the line. I believe that you then have to first click on the color swatch in the toolbar and then select your color (or choose Show Colors and select from the color tool). Just clicking a color in the crayon box, for example, did not seem to work unless I first clicked on the color swatch in the toolbar, then clicked Show Colors on that dropdown, and +only then+ clicked the crayon or whatever.
_The right spot to click_ seems to be just above the exact center of the data symbol, at least for the diamond shape symbol that I prefer. Sometimes it takes several tries to hit the right spot. If I miss it, the whole line is selected, which is indicated by the little selection dots on the line, between the data symbols. When I click the right spot, those selection dots go away, leaving only the data symbols selected. Then I can change the color, as described above.
I hope this works for you too.

How to change color of text is value is equal to 0

how to change color of text or background if value is equal to 0

HI,
In Template Builder,Insert the conditional region,there you select the column and give condition is equal to 0 and in advanced enter the following code
<?if:XMLfield=0?><xsl:attribute xdofo:ctx="block" name="background-color">red</xsl:attribute><?end if?>
try this it works.
Regards
Uday

How to change colors of LCD/VFD controls from SGC-Tek?

Hi Anybody got idea how to change colors of LCD/VFD controls from SGC-Tek?
I have tried but could not. When I try to make myself a nest cluster of clusters of LEDs, I can change colours but I can't do the same thing with LCD/VFD controls.
Please check at LCD/VFD controls
Clement

I suspect this repsonse is somewhat mis-leading, the code has no effect on the control other than setting its state, although the route is somewhat tedious for the mod.
I would imagine that the control is set up so that the pixels didn't move around when they are being used as controls.
There are nested groups and locks on the controls, which might make the ordering in the cluster easier to manage.
The following should work....... ;-) it did for me
Open your own new VI
Open the main LCD VI
Open the Browse VI Hierachy
Drag and drop the LCD VI onto your own diagram
Create a cluster from the LCD VI's connector
Now ungroup the clusters and unlock them (this is tedious) if you create your own then you could be more imaginative in the structure, I leave that for homework.
Then import a new bitmap (gif) into the control
Now update the modified contol back into the master control
........ Told you it could be done, but I am not sure the pain was worth it.
BUT
Try the alternative control..... with colour settings as well, ANY colour and even some size control.
It was here http://members.lycos.co.uk/sgctek/

How to change color in BEx Browser?

Hello Friends,
How to change color in BEx Browser?
My browser shows all the report description with pink color. I want to change the color.
Please let me know.
Thanks in advance.

Hello Bhavin,
It seems the patches for BW Add-On are being kept pretty much in sync for 6.20 and 6.40 (i.e they seem to be released at around the same time, even that the patch level numbers are different).
However, at BW Add-on Patch level 4 on a SAPgui640 machine, we didn't have the "pink font" problem.
It may be that BW 3.5 Add-On patch 6 will have a similar effect for you - it may be worth trying.
Here is the link to the BW3.50 patch 6... https://smpdl.sap-ag.de/~swdc/012002523100000108232005D/bw350_6-10001615.exe?_ACTION=DL_DIRECT
The patch 6 referred to above is for the BW3.50 Add-On - the SAPgui patch is typically a different number (the 11 that you mention is the SAPgui patch level).
Best regards,
Pat M.

How to change color in the title line?

Hi experts, How to change color in the title line, i show an image for explained better
!http://img688.imageshack.us/img688/9259/imagenjar.png!
thanks

in Views.css file
file below object.and change border-color as you desired to reflect.
.TitleTable {
     font-family: arial, helvetica, sans-serif;
     border-width: 0 0 4px 0;
     border-style: solid;
     border-color: #6666cc; ----> change here.
hope this helps !
-Niranjan K

How to set color to a column in ALV?

Based on standard example BCALV_GRID_01 to modify,
how to set color to a column???
Moderator message: please search for available information/documentation before asking.
Edited by: Thomas Zloch on Nov 6, 2010 9:43 AM

Hi Sai ,
you are posting the querry in the wrong forum ..
but still I will answer ur querry...
Incase you are not using the standard class to make your ALV then u can set the color of each column in the propertiesof column in the design time .
Incase u see the colors in the design time but is not able to see the colors at the run time then you check the settings of the table I dont have system right now else I could have told you exact property...
else if u r amking alv from the standard class then u will have to search the net for the method to color the same ..
Thanks
Sahil.

My ipod touch's screen is changing colors and will not respond to the buttons

my sisters ipod touch is a 4th gen and the screen recently started changing colors, it does not respond to the buttons and will not turn off. should i wait for the battery to die then charge it. she said it started happening when she was charging it. could it be the charging cable? i do not know what OS it has.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How do I get IE 11 to open in the same window on the task bar?

How do I get IE 11 to open in the same spot on my task bar. i.e. IE 11 is on my task bar. When I open it, it opens in a new place on the end of the task bar. Microsoft Outlook, Windows Explorer, Quicken, Adobe, etc,, all on the task bar open
right at there location on the task bar; not in a new place at the end of the task bar.
How do I get IE 11, Windows 7, 64 bit to open at the same place as the IE icon???
Thanks

Hi,
Seems a strange issue, How about un-pin IE from the taskbar, then re-pin it to the taskbar for a test?
If doesn't work, I suggest you turn off IE 11 in "Turn Windows Features on or off", reboot PC, then re-turn on, check the result again.
Regards
Yolanda Zhu
TechNet Community Support

How can I hide page thumbnails navigation bar at the start up of Adobe Reader and open a pdf file?

How can I hide page thumbnails navigation bar at the start up of Adobe Reader and open a pdf file? I could not find this option under Preferences tab? Thanks

Hey there,
Thanks for your reply. That works for the files I do what you said. However, for files I have not done that, It still shows the navigation bar. Any idea, how to do it default for any files?
Thanks agian

How to change colors of individual column bar in the same data series

Similar Messages

Maybe you are looking for