How to change colors settings -- newbie to mac

I was messing around with the settings and selected to polarize the image so that it looks like a photo negative. I feel like a moron so far in using the mac and i cant find how to switch it back to normal. Any help is appreciated.

Welcome to Apple Discussions!
If you mean the whole screen has turned negative, open the Universal Access preference pane (in System Preferences in the Dock) and in the 'Seeing' tab, click a checkmark against 'Black on White'. You can also switch between 'normal' and reversed modes with Cmd/Opt/Crtl/8.
If you mean an image such as a scan or photo, it depends on which software you're using!

Similar Messages

  • How to transfer printer settings from one Mac to another (both OSX)?

    Hello, I have not found a detailed description on how to transfer printer settings from one Mac to another.
    My issue is that I have a Mac G5 with 3 different settings saved as "presets" for the same printer. This works great, since the posters I print (on the large format printer) need different margins and different paper at times.
    This G5 is basically retired and only used for printing. G5 has OSX 10.3.9
    I have a MacPro as its replacement (OSX 10.4.11).
    The MacPro has all my apps and other settings setup to my liking.
    I found several links via Google saying copy this folder or directory, but I am not sure I did it correctly. I don't see the "presets".
    I tried launching the Migration Assistant (I hope that's the correct name), but was concerned the settings on the new MacPro would be overwritten with ALL the old stuff on the older G5. I did not start the transfer process because of this.
    If someone would list the steps needed to accomplish the transfer of printer settings or advise if this is possible, then I would be very grateful! The previous user of the G5 I am using was a "Genius" and I don't know how he created these "preset" choices.
    Thanks!

    Hi SCChelpdesk, and a warm welcome to the forums!
    I found several links via Google saying copy this folder or directory, but I am not sure I did it correctly. I don't see the "presets".
    This is the File that holds that info on Tiger, not certain on Panther...
    /Users/YourUserName/Library/Preferences/com.apple.print.custompresets.plist
    After moving, you very well might have to change the Owner's Permissions within Get Info window, then log out/in.
    I tried launching the Migration Assistant (I hope that's the correct name), but was concerned the settings on the new MacPro would be overwritten with ALL the old stuff on the older G5. I did not start the transfer process because of this.
    MA would transfer the info, but/and, if the user that had that info had the same Shortname as on the new one, it'll demand you give it a new Shortname to use... but then those settings would be transferred to that new user on the new machine. I think the 1st one will work though.
    The previous user of the G5 I am using was a "Genius" and I don't know how he created these "preset" choices.
    We can go through that way if you like... not all that hard.

  • How to change colors of LCD/VFD controls from SGC-Tek?

    Hi Anybody got idea how to change colors of LCD/VFD controls from SGC-Tek?
    I have tried but could not. When I try to make myself a nest cluster of clusters of LEDs, I can change colours but I can't do the same thing with LCD/VFD controls.
    Please check at LCD/VFD controls
    Clement

    I suspect this repsonse is somewhat mis-leading, the code has no effect on the control other than setting its state, although the route is somewhat tedious for the mod.
    I would imagine that the control is set up so that the pixels didn't move around when they are being used as controls.
    There are nested groups and locks on the controls, which might make the ordering in the cluster easier to manage.
    The following should work....... ;-) it did for me
    Open  your own new VI
    Open the main LCD VI
    Open the Browse VI Hierachy
    Drag and drop the LCD VI onto your own diagram
    Create a cluster from the LCD VI's connector
    Now ungroup the clusters and unlock them (this is tedious) if you create your own then you could be more imaginative in the structure, I leave that for homework.
    Then import a new bitmap (gif) into the control
    Now update the modified contol back into the master control
    ........ Told you it could be done, but I am not sure the pain was worth it.
    BUT
    Try the alternative control..... with colour settings as well, ANY colour and even some size control.
    It was here http://members.lycos.co.uk/sgctek/

  • How to change colors of individual column bar in the same data series

    in mac numbers, how to change colors of individual column bar in the same data series. The entire column series gets selected in the column bars and cannot select to change colors of specifc bars.

    Hi Kiran,
    no its not possible through Theme editor also ,because these colors are coming from Compiler which u are using.
    Regards,
    Govindu

  • How to Change Security Settings on an Existing Wireless Network

    I'd like to change existing network security settings to WPA2, AES or at least to from TKIP to AES.
    I'm familiar with browser access to the router and with how to change the settings on the router.
    My question is how to do this as painlessly as possible for the network.  Step by step would be nice
    I guess first I have to change the router settings using the computer running Easy Link Advisor?
    Do I then have to disconnect/reconnect that computer?
    Do I have to disconnect every other computer and then connect each one again with the updated settings?
    Will the change in security settings affect my print server?  If so, do I have to set it up from scratch in ELA?
    For the record, I have a WRT-300N and the print server is a 54g.
    Anyone who reads this may also want to look into recent news.  May not be a big deal, but a vulnerability of WPA/TKIP has been identified.
    Thanks in advance to anyone who answers.
    Solved!
    Go to Solution.

    Do I really need to set security for my wireless connection. I searched for available WiFi in my area prior to installing my  network and none were available. Does that matter?
    The network never did function right from the start. My desktop is a Dell Inspiron 510n and is not wireless capable? So when I tried to add my HP mni 1000 it did not let me access the Internet.
    So now I have an unsecured network. Am I vulnerable to attack?
    Which leads me to my real question How do I change the security settings?
    Oh yeah, my home computer crashed due to a program I downloaded, so I do not have access to it. i'm a mess....
    Thanks,for any help
    Phil

  • How to change screen settings

    Hi
    I have a small issue that in ABAP editor, screen is displaying like script editor and allowing me to delete the lines one by one ratherthan deleting all the lines at the same time.could u plz tel me,how to change the settings to allow the user for multiple lines selection?
    I m using the version 4.5b.
    Thanks & Regards
    Ravindra

    Hi,
      refer u may get an idea.
    https://forums.sdn.sap.com/click.jspa?searchID=4333019&messageID=3617437
    Regards

  • Does anyone know how to change the settings for siri as all he keeps saying to me is he can only look up businesses in the u.s

    my siri seems to be a bit confused as he thinks im in america but im in northern ireland is ther anyone who knows how to change the settings as i cant find them alsao he doesnt understand a word im saying

    To use another iCloud backup, you have to erase all content and settings or restore it. Either gets you to the backup/setup page.
    http://support.apple.com/kb/HT1766

  • How to Restore Factory Settings on a Mac?

    How to Restore Factory Settings on a Mac OS X 10.6.8?
    I have been told you can do this without the Installation CD. I also do not remember the installation CD when i got the laptop. If it's possible then please someone let me know! if not then how can i get a new CD to do this?
    my computer keeps freezing on me at random times, and i have tried taking the laptop to my college tech support and also Best Buy and they said they can't do anything and that i need to try resetting the mac.

    You may not remember the installer disks but they came in the box. Your profile shows you are running 10.6.6 Snow Leopard. To restore back to factory settings you need those disks. That said to go that route may be unnecessry. Stay away from Best Buy tech people. They know nothing. Without the disks you do a repair disk to see if that helps:
    Start up your computer in single-user mode to reach the command line.
    Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
    At the command-line prompt type:
    /sbin/fsck -fy
    Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
    ** The volume (name_of_volume) appears to be OKIf fsck found issues and has altered, repaired, or fixed anything, it will display this message:
    ***** FILE SYSTEM WAS MODIFIED *****
    Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
    When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
    Your computer should start up normally and allow you to log in.

  • How to change colors in Auction monitor

    Hi Experts,
    Could you please help me on below requirement,
    In Auction Monitor , need different darker colors for tracking bids  because some colors cannot be seen on the screen.
    Could you please guide me how to change colors in Monitor.
    Thanks,
    Pavan.

    Hi Vinay.
    I would like to suggest a couple of references, quite similar to your requirement,
    [SDN - Reference for Different Colors in Single Graphical bar|About Different Colors in Single Graphical bar;
    [SDN - Reference for changing colors for graphs|Anyone used colors in VC?;
    [SAP HELP - Standard Reference for Assigning Colors to Parts of a Graph|http://help.sap.com/saphelp_nw04/helpdata/en/39/cca358576911d1896f0000e829fbbd/content.htm]
    Hope that's usefull.
    Good Luck & Regards.
    Harsh Dave

  • How to change color of a button for specific time interval in jsp

    How to change color of a button for specific time interval in jsp.
    Please help.
    Thanks in advance.

    This was driving me crazy, too--and the previous answers did not seem to work. I eventually found that if I click one of the data symbols in the graph in exactly the right spot (see below), it selects only the data symbols and not the line. I can tell this because the little selection dots will be around each data symbol, but no selection dots will be on the line between the data symbols - like the graphic in Yvan's answer. Then and only then will the color symbol in the tool bar show the color of the data symbol, instead of the color of the line. I believe that you then have to first click on the color swatch in the toolbar and then select your color (or choose Show Colors and select from the color tool). Just clicking a color in the crayon box, for example, did not seem to work unless I first clicked on the color swatch in the toolbar, then clicked Show Colors on that dropdown, and +only then+ clicked the crayon or whatever.
    _The right spot to click_ seems to be just above the exact center of the data symbol, at least for the diamond shape symbol that I prefer. Sometimes it takes several tries to hit the right spot. If I miss it, the whole line is selected, which is indicated by the little selection dots on the line, between the data symbols. When I click the right spot, those selection dots go away, leaving only the data symbols selected. Then I can change the color, as described above.
    I hope this works for you too.

  • HT1428 How to change the account name in Mac OS X via a command line. I did a type-o on the account name. So instead of it saying "Company" it says "Comany"  for the account logon.

    How to change the account name in Mac OS X via a command line. When I created the account I mistyped the name. I have a management suite where I can execute remote scripts. I would like to run a script that changes the name from oldname to newname.
    None of these Macs have been used currently.
    Thank you,
    Brian

    If user account shortname, see Changing user account shortname

  • NW04s: How to change column settings like 'do not adjust' 'fit to resuts' e

    In the new Analyzer, old report format: how to change column settings: do not adjust, fit to results, etc.?
    Regards
    -Bala

    Hello,
    In the properties dialog of the Grid and some other items, there is a checkbox by name "Autofit". When this is checked, the result columns are expanded to correct data widths.
    Regards,
    Manjunath

  • How to change color in BEx Browser?

    Hello Friends,
    How to change color in BEx Browser?
    My browser shows all the report description with pink color. I want to change the color.
    Please let me know.
    Thanks in advance.

    Hello Bhavin,
    It seems the patches for BW Add-On are being kept pretty much in sync for 6.20 and 6.40 (i.e they seem to be released at around the same time, even that the patch level numbers are different).
    However, at BW Add-on Patch level 4 on a SAPgui640 machine, we didn't have the "pink font" problem.
    It may be that BW 3.5 Add-On patch 6 will have a similar effect for you - it may be worth trying.
    Here is the link to the BW3.50 patch 6... https://smpdl.sap-ag.de/~swdc/012002523100000108232005D/bw350_6-10001615.exe?_ACTION=DL_DIRECT
    The patch 6 referred to above is for the BW3.50 Add-On - the SAPgui patch is typically a different number (the 11 that you mention is the SAPgui patch level).
    Best regards,
    Pat M.

  • How to change color in the title line?

    Hi experts, How to change color in the title line, i show an image for explained better
    !http://img688.imageshack.us/img688/9259/imagenjar.png!
    thanks

    in Views.css file
    file below object.and change border-color as you desired to reflect.
    .TitleTable {
         font-family: arial, helvetica, sans-serif;
         border-width: 0 0 4px 0;
         border-style: solid;
         border-color: #6666cc; ----> change here.
    hope this helps !
    -Niranjan K

  • How to change the Settings in the Graphic structure. T Code CN41

    Hi,
    How to change the Settings in the Graphic structure. T Code CN41
    Iam using the T Code cn41 to know the diff in Duruation, work, remaining duration in diff project version. I am getting the Graph/curve with standard settings and system is not allowing to change the scale (Y-X Axis) the way i required.
    Pls advise me.
    Thanks in Advance.
    Raju

    Hi,
    Thanks for the reply. But please clarify a bit. Please below is my requirement.
    As per the SAP Avilable screen in T Code CN41,it is showing the scale of 1 and 2 only.
    Assume if it 12 Days as actual work VS Actual duration of 265 Hours .It is showing 2 = actual work of 12 days and 1= Actual duruation of 12 Days.  I want to have the scale in such a way that, we should be able to see from 0-100-200-300 Hours and Days 5-10-15-20.
    Can u pls advis how can i get these and also give me ur mail id so that i can send u the screen shot also.
    Regards
    Raju

Maybe you are looking for