How to change default thresholds for some metrics of all targets.

Hi!
We have a lot of servers which have to work hard.
So, our OEM very often generates messages like these:
"EM Alert: Critical:dbsora90.tsb.kz - CPU Utilization is 99.95%, crossed warning (80) or critical (95) threshold."
"EM Alert: Critical:dbsora94.tsb.kz - Disk Device c8t60A9800043346C384C344A4A63516D6Ad0(ssd4) is 99.7% busy."
"EM Alert: Critical:dbsora94.tsb.kz - CPU Load (Run Queue Length averaged over 5 minutes) is 20.78, crossed warning (10) or critical (20) threshold."
I need to change default tresholds for mentioned metrics but I can't their defenition in SYSMAN.MGMT_*-tables or suitable settings in OEM GUI.
And I have no time to edit treshholds manually for each target. )

Modification of Metric Thresholds (as this is what you are referring to), should be done using the Metrics and Policy Settings link (to be found in the Target Home page).
Don't mess around with the SYSMAN tables!
Best thing to do here is to start using Monitoring Templates for this.
Check:
Oracle® Enterprise Manager Concepts
11g Release 11.1.0.1
http://download.oracle.com/docs/cd/E11857_01/em.111/e11982/toc.htm
Regards
Rob
http://oemgc.wordpress.com

Similar Messages

How to change default approval for ResourceAuthorizerApproval ?

Hi,
I'am new in OIM and I follow documentation where I found some predefined workflows. I'd like to use them.
Could you tell me, step by step, how to change default approval for ResourceAuthorizerApproval (only for my new defined resource).
I'm using OIM 11g and Design Console 11.1.1.3.0.2.0

Ok, I made new tamplate (copy of existing one), there I changed Template Level Approval Process and set allowed resources. It seems to be ok :)
If there are other solutions please share with me
Thanks
M.

How to change default view for folders?

Whenever I create a new folder, the view always defaults to icons with the Sidebar visible. I want all newly created folders to open in list view, and I don't want to see the Sidebar. Can anyone tell me how to change the defaults? Thanks...

I'm not sure how to make it default, but I think you may be able to get rid of the sidebar for a whole session (you probably have to get rid of it again once you've restarted).
Just disable the sidebar by clicking in the little white ellipse/oval thingie in the top right corner of a new finder window. Then when you open new windows, or open folders in that one, they should all come up without sidebars, and in the same format. I hope that works for you, but honestly I don't know why you wouldn't want the handy sidebar

How to change default ports for task flow application?

I deploy a task form with the following hwtaskflow.xml information:
<?xml version = '1.0' encoding = 'UTF-8'?>
<hwTaskFlows xmlns="http://xmlns.oracle.com/bpel/workflow/hwTaskFlowProperties">
<ApplicationName>worklist</ApplicationName>
<LookupType>LOCAL</LookupType>
<TaskFlowDeploy>false</TaskFlowDeploy>
<TaskFlowServer>
*<hostName/>*
*<httpPort/>*
*<httpsPort/>*
</TaskFlowServer>
<hwTaskFlow>
<WorkflowName>ApproverHumanTask</WorkflowName>
<TaskDefinitionNamespace>http://xmlns.oracle.com/MyApp/MyComposite/MyTask</TaskDefinitionNamespace>
<TaskFlowId>MyTask_TaskFlow</TaskFlowId>
<TaskFlowFileName>WEB-INF/MyTask_TaskFlow.xml</TaskFlowFileName>
</hwTaskFlow>
</hwTaskFlows>
When I deploy the form then check the task URI in EM I see
Host name: server host name
HTTP port: 80
HTTPS port: 443
I know I can override these ports in the hwtaskflow but what if I want HTTPS port left blank? We don't have HTTPS active on our server. Another server in our environment only populates the HTTP port (HTTPS port is left blank) but I'm puzzled why the different behavior.
Can anyone tell me either how to specify a "blank" HTTPS port in the hwtaskflow or, preferably, how to change the server configuration so that HTTPS port is not filled in when I deploy the task form? We are wanting a completely automated deployment and presently we have to manually remove the HTTPS port via EM after deploying. Argh!

Jon,
May be you already figured out the solution nevertheless i will answer your questions.
1. Turning off the https port - give value as 0 for httpsPort in your hwtaskflow.xml.
Second reason why your custom hwtaskflow is not getting picked up is you have set the TaskFlowDeploy as false.
If you set this as true , and specify your cluster address you should be all set.
for eg : - your cluster host address is somename.cluster.com with only http configured at port 80 lets assume.
Then your hwtaskflow should look like this
<?xml version = '1.0' encoding = 'UTF-8'?>
<hwTaskFlows xmlns="http://xmlns.oracle.com/bpel/workflow/hwTaskFlowProperties">
<ApplicationName>worklist</ApplicationName>
<LookupType>LOCAL</LookupType>
<TaskFlowDeploy>true</TaskFlowDeploy>
<TaskFlowServer>
<hostName>somename.cluster.com</hostName>
<httpPort>80</httpPort>
<httpsPort>0</httpsPort>
</TaskFlowServer>
<hwTaskFlow>
<WorkflowName>LeaveRequestTask</WorkflowName>
<TaskDefinitionNamespace>http://xmlns.oracle.com/BuildApplication/BuildProject/LeaveRequestTask</TaskDefinitionNamespace>
<TaskFlowId>LeaveRequestTask_TaskFlow</TaskFlowId>
<TaskFlowFileName>WEB-INF/LeaveRequestTask_TaskFlow.xml</TaskFlowFileName>
</hwTaskFlow>
</hwTaskFlows>
This will automatically pick up the values on deployment , other play you can configure this is in your em console as well.

How to change default settings for a video generator?

I'm using a video generator (Lyric Media's Pan Zoom Pro) many times in the same project, and have to change the default settings for each new instance of the generator that I create. I'm wondering if there's any way to change the default settings for a generator (i.e., length of clip, individual slider and checkbox settings in the "controls" tab) so that each new instance automatically has my customized settings when I first open it.
Thanks.

That works for the all the controls/filter settings. The clip length still defaults to 10 seconds, but that's OK, since the main thing I was looking for was to change the clip's internal settings. Thanks for your help

I need to know how to change default browser for my desktop icloud apps to open with.

I like to use the desktop icloud apps, but when i use them, they open with IE when my default browser I like to use is Chrome. Is there a way to make it open with Chrome when I open Calendar or iCloud from my desktop instead of IE?
thankyou for your help in advance!

Ed...maybe a little less time gaming and a bit more time in English class? They got this thing called punctuation and sentences now. Last things first; there is no amount of money that can change your GPU so you can scratch that expense off the list. So you need a battery and a fan? Where do you live? USA? We can help you find a battery but where did you plan to have the new fan put in?

How to change Default editor in Linux for PL/SQL Programming

Deare friends ,
I am using oracle 8i (8.1.6) on RedHat Linux 7.2 , But i donot know how to change default editor for modify editor on sql prompt say ex:-
In winodow
SQL> ED
it open nope pad to modify sql and pl/sql statement
while in linux
SLQ > ED
it open one editor but it is not easy to work and i want to change that editor so could you tell me how to chane editor i want to use vi editor .
if any boyd know reply me on :-
[email protected]
or on this forum
Thanking you in advance
Piyush Patel

Either manually do a 'define editor=vi' when you log in through sql*plus, or put that in the glogin.sql in $ORACLEHOME/sqlplus/admin or put that in a login.sql in the directory you run sqlplus from.

How to change default Current Flag values for SCD2?

I'd be curious to find out how to change default Current Flag values for SCD2 (instead of 0/1 to use N/Y)
Probably I can change IKM module .... is there another way?
Thanks

Hi,
You need change the IKM. This values are hardcode in the IKM.
You can create a new IKM and the values used are a options of the IKM.
Regards
Edited by: Uthred on May 18, 2009 4:27 PM

How to change default ringtone to a custom one for IPhone 5.

I have gone into settings through Sounds made the change, but it does not register as the default even though the ringtone chosen has the checkmark beside it. Ringtone still lists the factory default under sounds & vibrations.
I am able to customize ringtones for individual contacts.

user598986 wrote:
Hi,
How to change default value in a table
I have a table TEST which has 2 fields CODE of Datatype VARCHAR2(10) and Indicator as VARCHAR2(1).
I want to change the default value using ALTER TABLE TEST of field Indicator to 'I'.
ALTER TABLE test
MODIFY (indicator DEFAULT 'I');
Incidentally, INDICATOR is a keyword in Oracle, so you may have problems using it as a column name. If so, you'll have to enclose the column name in double-quotes, and be careful to use capital letters inside the quotes.
Edited by: Frank Kulash on Aug 26, 2009 11:42 AM

How can I get the default value of a particular preference programatically. I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.

<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [tiki-view_forum_thread.php?comments_parentId=702631&forumId=1]
Thanks - c</blockquote>
== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
How can I get the default value of a particular preference in FireFox?.
I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.
I see some that there are values for preferences in firefox.cs but I am not certain that these are being used as the default values for preferences. prefs.js in user's profile only has the updated values and not the default values.
Any help towards acheiving this programtically is greatly appreciated.
If the default values are stored in a file, kindly let me know the format in which it is stored for me to parse it programatically.
== User Agent
==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

Dear Friend,
Here when you have the callableSattement as ?=proc(?), the first ? is an output parameter. So you should register it as out parameter using registeroutparameter.
Then you can get the value from the outparameter using callablestatement.getXXX().
Try that way.
For free tral versions of JDBC Drivers go to www.Atinav.com

How to change default PIRWBUSER password for ABAP Proxy monitoring ?

Hi,
Please advise how to change setting for PIRWBUSER in PI so no need to use master password PI in ECC server.
In the Message monitoring you can have option to monitoring ABAP Proxy transaction in the other SAP Instance. But of course you need to have PIRWBUSER in that target SAP instance.
How to change this configuration for PIRWBUSER for other SAP Instance. because other SAP instance it migh have different password for PIRWBUSER ?
Regards
Fernand

Hello there.
Please check the note below according to your system:
#999962 - PI 7.10: Change passwords of PI service users
#936093 - XI 7.0: Changing the passwords of XI service users
#721548 - XI 3.0: Changing the passwords of the XI service users
Regards,
Caio Cagnani

How to change default alerts in iCal?

Hello.
Every time you add a new event in iCal, the Info panel of the event contains a series of default alerts that you may want to add to it. However, all of them are useless to me (e.g.: "Send email to <my address> 4 days after), so I need to manually edit them event by event. Anybody knows how to change them? I have already inspected all the plist files related to ical, and looked inside the ical package content, but I found no indication of where to change these values. Using iCal version 5.0.2
Thanks,
l

John: Thank you, this is exactly what I wanted. I was indeed inspecting the plist with bbedit, but what I did not realize is that the file has some parts which are binary, so I could not see the PersistentMenu-lastUsedAlarms part by using a text editor. I opened it with Xcode and I did find what you were saying, and erased all the junk that was in there. In fact, the issue I had was also described here:
http://newsgroups.derkeiler.com/Archive/Uk/uk.comp.sys.mac/2010-06/msg02349.html
For some reason, it looks like after some upgrade the program adds were some positive values in the plist and I was stuck with default alarms that were set *after* the events I wanted to set an alarm for.
I did what you suggested, then added by hand new values to the PersistentMenu part of the plist, and I am now happy.
For everybody's information, to know what I did, it is enough to know to add Dictionary items to the PersistentMenu-lastUsedAlarms, with 3 fields:
-- AlarmTypeKey (this determines if you want a sound, or else an email, or else the other default alarm type keys. For example, sending an email is a Number, value 4; having a message with sound is a Number, value 3)
-- AlarmDurationKey: This is a Number, in seconds, that determines when you want your alarm to trigger. E.g: -172800 will be two days before. Must be negative for "before", of course)
-- AlarmParameterKey: This is a String, where you store the value that you want the alarm to have. For example, if you want an email to be sent, the AlarmTypeKey will be 4, as explained above, and this field will contain your email address. Instead, if you want the alarm to be a sound, the AlarmTypeKey will be 3 and this field will have the name of the sound you want (e.g., Basso).
That's it. Thanks a lot for the solution!
l.

How to change default decimal separator

Hi,
what is the problem with the code below ? The output is 1234.5 however, I need it to be 1234,5
          String itemFormat="%4.1f";
          Double x = 1234.5;
          Locale dl = Locale.getDefault();
          DecimalFormatSymbols dfs = new DecimalFormatSymbols(dl);
          dfs.setDecimalSeparator(',');
          System.out.println(String.format(dl, itemFormat, x));It is testing code, however I need to use % formating, and I need to use String.format function.
So, my question is - how to change the locale for String.format function ?
Edited by: woowoo2 on May 15, 2008 7:38 AM

woowoo2 wrote:
but I think, this is not very smooth solution... I am not what about the diffrences between the current user locale and the French locale. It would be best to change actual user locale... but I wonder if this is possible...I think the java runtime determines the locale it is in by querying the operating system. This becomes the "default" locale. So if the machine knows where it is, so will the java runtime, and doing getDefaultLocale() should work seamlessly.

How to change default Ovi Player store ...

Hi,
I need help from you people.
I had installed Ovi Player. Whenever I try to open Ovi Player, the default store gets’ open is "India". I change the store location to "Germany". When I do the search for particular music, it will again take me to "India" store instead of "Germany" store. In addition, most annoying is that I have to re-login but my user id and password will not work as its different store. Also when I go via music.nokia.de and try to login, it open Ovi player and since default location is "India", it takes me to India store and my login credentials do not work.
I ask Nokia care on how to change default Ovi Player Store location but they are unable to provide any good answer.
I already un-install / re-installed but won't work. Do any of you have answer to my problem? I want my default Ovi Player location to be "Germany" instead of "India".
More information, my regional settings have location as “Germany” and language as “English”.
Please help.
Thanks for your response.
Regards,
Subhendra
Nokia N97 Black
RM-505
V12.0.026
0586701
Solved!
Go to Solution.

I had got message from Nokia on how to correct this issue. This had solved the problem. Below is the mail from them ...
Dear Chakraborty,
Thank you for your response.
This error is sometimes caused by a corrupted MDataStore.db3 file used by the Ovi Player. This file will need to be deleted with the Ovi Player closed. Then open the player and the datastore file will be rewritten by the application:
Close Ovi Music Player and delete the MDataStore.db3 file:
Vista C:\Users\<user>\AppData\Local\Nokia\Nokia Data Store\DataBase\MDataStore.db3
XP C:\Documents and Settings\<user>\Local Settings\Application Data\Nokia\Nokia Data Store\DataBase\MDataStore.db3
Both of these locations are in hidden folders. So, to view them users will need to:
Open Windows Explorer > Tools > Folder Options > View > Show Hidden Files and Folders
Once Ovi Music is opened again the MDataStore.db3 file will be rewritten to this folder.
  After that manipulation try to install the Ovi Player once again:
http://europe.nokia.com/explore-services/music/nokia-music
  Best regards
Nokia Care Team

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

How to change default thresholds for some metrics of all targets.

Similar Messages

Maybe you are looking for