How to change gain or volume of one sample or loops in GB that remains fixed to it?

I am not talking about automation,nor am I talking about track volume.....
automation is a change for a place....if you happen to move that loop or clip from that place the pitch volume or tempo change is gone.....I want to change the volume of that one clip ......that remains specific to that part no matter where you move it.....

"fiddling' with those points and lines" is called creating "automation" and every pro user in Logic or any other DAW is doing that constantly. It is actually great that GB has this advanced feature (to some degree)
But you are right, the command for muting a Region should be included in GB. The other command for applying a simple gain offset to a Region wasn't even possible in Logic until recently.
If you feel strongly about specific features that should be available in GB, just send it to the GB Feedback. Most of the features are there (based on the underlying Logic code base). Apple just have to be convinced to enable a feature because they are convinced that most of the GB users need it.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Similar Messages

  • Hi, please, anybody knows how many coolers has an iMac 27 Intel core i5? The widget iStatpro shows 3. I changed my HD (the previous one of 1TB crashed) and after that the HDD cooler is constantly working at 4.600 rpm. Anybody is facing this problem?

    Hi, please, anybody knows how many coolers has an iMac 27 Intel core i5? The widget iStatpro shows 3. I changed my HD (the previous one of 1TB crashed) and after that, the HDD cooler is constantly working at 4.600 rpm. Anybody is facing this problem?

    Did you replace the HD yourself? If so what HD did you use?
    You should be aware that the symptom you describe is likely to be because you've used an incompatible HD. The current Macs have the temperature sensor actually in the HD package, with a modified cable to connect to the logic board.
    If the sensor is not in circuit, the fans will run full tilt all the time.
    Also, if it was under warranty, I think you'll find you've just voided it.

  • I have clicked on to a app and now my apple store app is Spanish andi don't know how to change it back can any one help me?

    I have clicked on to a app and now my apple store app is Spanish andi don't know how to change it back can any one help me?

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3.Tap "View Apple ID"
    4. Enter your user name and password.
    5. Tap "Country/Region."
    6. Tap "Change Country/Region"
    7. Select the region where you are located.
    8. Tap "Done".

  • How To Change the Tempo of Just One Track?

    I want to change the tempo of just one track of a song, but when I change the tempo of one track, the tempo of the whole song changes and gets messed up. Does anyone know how to just change the tempo of just one track of the whole song.

    You can not change the tempo of a single track, in GB it's one tempo per song.
    The only workaround would be to change the tempo, export only that track (soloed), and then drop the export back into your project (with it set back to the proper tempo)

  • How to change battery in all-in-one G3

    I know we have an all-in-one G3 with a dead battery. Where can I go to find out how to get into an all-in-one and change the battery? I have changed the battery in desktop G3.
    Mary Lou

    The battery sits near the end of the sound card, in a little black holder. It is 3.6 Volts, 1/2 the length of AA battery. Radio Shack carries them because they sell an alarm system that uses them (they do not care that it fits in a Mac).
    To remove the cover on the little black holder, you must apply pressure outward along its length. This appears to be impossible, but a very slender object such as a jeweler's screwdriver can be inserted just inside the end to apply outward pressure and release the cover.
    To access the "works in a drawer", you first need to check for the four retaining screws -- above and below the PCI slot covers and in symmetrical locations on the other side. Once these screws are removed, use the handle-shaped indentation in the plastic below the built-in Display port to pull the drawer open. Sometimes it puts up quite a fight, but it will slide open.
    You will be looking at the connectors-side of the motherboard (opposite the way MacGurus draws them) The battery is in the side far away from you, in line with the sound card.
    http://www.macgurus.com/products/motherboards/mbppcg3allone.php
    If you ever need to remove the drawer completely (which is very helpful for some more involved servicing), there are only 4 cables that must be disconnected. If you place your hands under the drawer you can release the latches that keep it from sliding all the way out by accident.

  • How to change from member to owner 800 # dont work no promps for that

    how to change from manager to owner 800# don't work

    oops, that was a typo ;  prepaid accounts only have Account Members.

  • How To: Make Beats in LOGIC/Soundtrack Pro - sample is LOOP Adrenaline Loop

    1) What is the best way to make a loops (similar) to the loop e.g. that comes with Logic, Soundtrack Pro that is in the category Rythmatic (Adrenaline Electronic Long (TITLE)), I have used ableton and SX, Nuendo, Acid....just trying to find the easiest way -not knowing the way to work quickly is a bit frustrating....
    2) What key command in logic when double clicked (or key command) will open the aiff file in Sound Track and after editing put back into Logic?
    3) Are there any good books on Logic 8 or on-line video training available yet?
    4) Due to me not having enough space on MBP, I did not install orchestral jam pack - is this why the templates for ORCHESTRAL DO NOT show up in templates? If so, how do I repair.
    5) I forget ? 5 LOL.

    Anyone?
    Thanks.

  • My iPhone is still displaying my old Apple ID and I can't figure out how to change it to my new one?

    I have an iPhone 4s and it keeps asking me to sign in using my old Apple ID and I have a new(ish) Apple ID that I've been using for several months, since before I even got the iPhone, but it's still not using my new ID. The new ID is on my iTunes and iPod, but isn't on the iPhone. I can't figure out how to edit or change my Apple ID in the settings. Help me?

    Hi,
    I have the same exact problem, and I see no one has posted a correct answer for you.  Alexbird's reply didn't help.  Can someone give us the correct answer?
    My old email address is on my new iPhone 4s, and I can't change it.  In the store on the iPhone 4s it correctly has my new email address.  iTunes also correctly has the new email address.
    I can't update my apps because the old email address is stuck in there, and no password is being accepted.
    (By the way, as much as I attempted to read all of the warnings online about how to back-up and transfer data from my iPhone 3gs to my iPhone 4s, sure enough apps were lost.  I wish instructions on 'Fingertips' had been clearer)
    Thanks!

  • How to change the Source system from ONE DataSource?

    Hi,
    I'm trying to change a DataSource's source system (active with dtp and transfer rules), but it's not possible to  do it in change mode because the field 'Source Sytem' is not enabled. I know I can use the BDLS transaction but I understand that this is for change all Datasources and I only want to change one of all.
    Thanks for your help

    Hi Marcel,
    As I understand apart from file and web services all other data sources are replicated from underlying source system. BDLS transaction is used to change the source system but in case of system copy activity and it is necessary because the data sources points to old source system.
    In your case as I understand you will have to replicate the current data source directly from underlying source system and then build the rest of the flow. May I know how you have got this single data source for which the source system is different?
    Regards,
    Durgesh.

  • How to change Adobe Master Collection from one PC to another PC

    Hello i need to know how I can change Adobe Master Collection From my pc to another pc I dont know how many steps I need to do.
    Please help me to check this issue

    if you no longer want your master collection on one computer, open an adobe program>click help>click deactivate and then uninstall.  (but you're allowed to install and activate on up to two computers so you need not deactivate and uninstall.)
    to install on another computer you need your serial number and the installation files.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • How to change color of text in one cell of a List component?

    I tried this but didn't work:
    list.getItemAt(2).textField.setStyle("textFormat", tf);
    Thanks!!

    Shy layers?  I see the words "Music Party" in two text layers in the timeline.  Here's what you do:
    Double-click on one of the text layers to highlight all the characters in the layer.  Go to the Character Pane and change the color.  Double-click on the other text layer.  Instead of changing the color in the Character pane, use the eyedropper to match the color of the first layer.
    Easy as pie.

  • Hello all, does any one know how to change the master number from one nuber to the other number, as in....she no longer wants to be the account holder and wants to change the accoutn master over to my number...i can figure it out...and help?

    any one in here?

        jason6911
    Help has arrived! Let's make sure we get this addressed. From my understanding you are trying to take ownership of a phone number that is currently under someone elses name correct? This would be called Assumption of Liability. Here is a direct link to get the process started. http://vz.to/1zruXOX
    JorgeO_VZW
    Follow us on Twitter @VZWSupport

  • How to change serial number with existing one

    dear all,
    Our user create 2 different serial number with same material. let me say A and B. A is the correct serial number but fault historical. and B is the fault serial number but correct historical. The question is can we change the serial number, A with B and still got the correct historical from B
    Regards

    if both the serial number are present in stock & are assigned to a wrong material in this case what you can do is :
    Issue goods through movement 201 alongwith the existing serial numbers (mismatched) against a cost center & GL (Stock Adjustment)
    Receive goods through movement 202 with correct Serial number a cost center & GL (Stock Adjustment).
    eg. in your case :
    Document 1 with movement 201 to remove mismatched Serial number  :
    Material-- Serial Number-----Qty
    A-- 1--
    1
    B--  2--
    1
    Status of both serial number will change from ESTO to AVLB
    Document 2 with movement 202 to assign correct serial number :
    Material-- Serial Number-----Qty
    A-- 2--
    1
    B--   1--
    1
    this way you can resolve serial number mismatch case....

  • HT2589 im trying to change the apple id on one of our family ipod so that one ipod doesnt get downloads that the other one got

    we have 2 ipods but would like them to have seperate accounts so the downloads dont go on both of them everytime one downloads something

    AUTOMATIC DOWNLOADS
    Settings > iTunes & App Store > Automatic Downloads > Music/Apps > Off
    How To  >  http://support.apple.com/kb/ht4539
    Troubleshoot  >  http://support.apple.com/kb/ts3688

  • How do I mount a disk in one Macbook from another Macbook in order to fix?

    I have a Macbook with Startup disk problems so I want to use DiskWarrior to fix it. I've downloaded DiskWarrior, but the download version doesn't allow me to create a bootable disc to boot from. I'll have to wait for the DVD they are shipping to me for a bootable version. But I need to fix my Macbook asap.
    So I'd like to use my other Macbook to mount the startup disk on the Macbook that's having problems and run DiskWarrior on that disc.
    Can this be done? If so, how?
    Much thanks!

    Hi Jim,
    You can do a Target Disk Mode using a FireWire cable. In the case of double MacBooks, you'd want to use a FireWire 400-to-FireWire 400 (6pin-to-6pin) cable. You can mount the MacBook in question and then tell DiskWarrior to scan that HD.

Maybe you are looking for

  • My Macbook Pro keeps freezing/crashing after a few seconds of use, but works fine in safe mode.

    I've researched this extensively, but I haven't been able to solve my problem yet. It started completely out of the blue with a kernel panic, where my screen seemed to malfunction and I got the kernel panic message (but I could hardly read it because

  • What MIME plug-in do I need?

    Hello, I'm a new Mac user so things are still a bit foggy. I'm trying to open "what's on now" from a radio station but it gives me this message: The page has content of MIME type "application/x-oleobject". Because you don't have a plug-in installed f

  • Doubt in length function

    I am beginner in PL/SQL.The Following statement returns only 40 thugh the exact length is 91. SELECT length(1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950) FROM dual Also, I get the same result whenever th

  • Solaris 10 x86 jumpstart patch problem

    I'm trying to jumpstart and deploy the patch using the profile file(classfile). I does work well on the sparc however I seem to have an issue with x86. The line in profile file looks like this patch patch_order nfs server1:/patch/10_x86 patch patch_o

  • Please Help - Recovery of trashed files

    Hello there, Could any one give me some directions as to how to try recovering deleted garage band files? My son emptied the trash (non-securely) and then called me. Any Terminal commands or other possibilities? Any help will be SINCERELY appreciated