How to Change layout in MIRO screen?

Hi,
I need to change the MIRO screen layout. But i understand that it is not possible from MM. Can anyone guide me where can i do this change? it will be a great help if anyone guide me on this.
Thanks
Sunil

For MIRO, you can use tcode OLMRLIST, to create screen variant.
OR
For changing any layout of the Screen you have to create a Screen Variant or you can change the Standard Screen Variant (Basic Settings i.e the Standard screen variant. )
Procedure:
1) Use T-Code SHD0 and give the Transaction code : MIRO,
2) Go to the Screen Variant TAB
3) Select the Screen variant from the Possible List of Entries
4) If u want to EDIT the existing screen Just Click on the Change mode
5) It is not recommended to change the Basic Settings you can create with Z<Screen Variant>.
6) Click on create it will open the T-Code MIRO, Just click BACK button or Function Key F3 it will show you fields of the that Screen
7) Select which one you want to make Invincible or Required fields.
8) Save & Activate the Variant.
Also, refer link for understanding: -[SHD0 Variant |http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a070bfbb-d34a-2d10-b092-ecbe0b0d4a4c]
Thanks & Regards
JP

Similar Messages

Change layout in MIRO

Hi Friends,
How to change the screen layout in MIRO screen in SAP.
thanks,
Hani

Error : Object can only be created in SAP Package.
This situation would arise if you are using a diffrent naming convention except "Z' or "Y" .
Use the varient name starting with "Z" or "Y" , then you would see that the error wont crop up .
Cheers ,
Dewang .

How to change layout of report S_ALR_87012083?

Hi everybody,
    How to change layout of report S_ALR_87012083 except change output control at selection screen ?
    For example,I need a list that there have vendor no. at every line of open item,and I don't need Total liabilities for every vendor.
Thanks a lot for any help.

Hi yu liang,
                 You can find vendor list having Vendor No. & without showing total liability for every vendor.
after executing the report,
1.You need to select "change layout (ctrl+F8)",
a small window comes, it has two part -> column content & hidden fields.
then u select "Vendor" from hidden field & move it to column content.
2. at column content there is a column named "Total". u need to remove check for your column name "amount".
now select "copy" button or enter. u will find the req. report.
u can save it also by ur name.
hope its helpful to u.......
plz, reward points as a way of thanks if helpful...

How to change font size on screen

how to change font size on screen

I'm not certain what font sizes you wish to change, when on a page you can use command and the += button to zoom in and make the fonts larger. On the finder desktop you can make what ever is on the desktop larger or smaller from the finder menu click view, custom view options, and adjust the icon size with the slider on the top, and the text using the text size box to select the size that your comfortable with.
Forgot to add these.
http://support.apple.com/kb/PH10876
http://support.apple.com/kb/PH10877
Hope this helps.

Reg: how to change layout in report writer

HI all,
how to change layout in report painter?
regards
JK Rao

Hi everybody,
I have a report painter using transaction ke30 and I want to change the header layout.
Now it looks like that
|_________|_________|
But i want to add another header row above this row, so it will look like:
|_________________________|
|___________|_____________|
Does anyone know the answer?
Thanks a lot for your response
Edited by: Vo Duy Pho on May 24, 2010 10:29 AM
Edited by: Vo Duy Pho on May 24, 2010 10:37 AM

How to change Win 10 unlock screen

how to change Win 10 unlock screen
without changing win 8.1
which is is on same HD

To enable us to help you better, you need to provide as many details as you can about the problem you are experiencing.
If you design your question effectively, you can get good information from people who are knowledgeable about the topic and who are happy to help you.
Prepare your question. Think it through. Hasty-sounding questions get hasty answers, or none at all.
What troubleshooting have you done so far?
Asking an effective question will get you help faster read how here
Suggestions for asking for help on a site.
http://www.catb.org/~esr/faqs/smart-questions.html
Wanikiya and Dyami--Team Zigzag

Change Layout in Selection Screen for OO ALV-Grid

Hello everyone,
I got a problem regarding layouts for objectoriented ALV Grid. I want to make it possible that user can take the layout for ALV he wants to on the selection screen. So far thats no problem and it works. But there are some little problems which I do not know how to fix them. But first the facts:
(1) I got my parameter for layout
PARAMETER: p_vari TYPE disvariant-variant.
(2) I fill my global layout structure in initialization
INITIALIZATION.
* Variante vorbelegen
   gs_variant-username = sy-uname.
   gs_variant-report   = sy-repid.
* Layout holen
   CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
     EXPORTING
       i_save        = 'A'
     CHANGING
       cs_variant    = gs_variant
     EXCEPTIONS
       wrong_input   = 1
       not_found     = 2
       program_error = 3
       OTHERS        = 4.
   IF sy-subrc = 0.
     p_vari = gs_variant-variant.
   ENDIF.
(3) I got my handling for F4-value help on variant parameter
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
   CALL FUNCTION 'LVC_VARIANT_F4'
     EXPORTING
       is_variant    = gs_variant
       i_save        = 'A'
     IMPORTING
       es_variant    = gs_variant
     EXCEPTIONS
       not_found     = 1
       program_error = 2
       OTHERS        = 3.
   IF sy-subrc <> 0.
     MESSAGE text-m01 TYPE 'S'.
   ELSE.
     p_vari = gs_variant-variant.
   ENDIF.
(4) I give back my parameters content into the variant structure at start of selection
START-OF-SELECTION.
   gs_variant-username = sy-uname.
   gs_variant-report   = sy-repid.
   gs_variant-variant = p_vari.
This works all fine but I got some problems when using default variants/layouts. For example I got a default variant only for me. When starting the selection screen it works fine that the default layout was written. It is displayed automatically in the variant parameter. But I want that if i I empty the content (blank it out) from my variant parameter, that report should start with "normal" layout how it was written in the report and NOT with default layout.
When I clear the gs_variant it works like I want it, but then the alv layout button looks like (without functions for layout), because I do not have the reference to my report.
So what to do? :-)
Regards
Michael

Wow that was fast, works great, thanks :-)
I did not use this parameter in set table method but now I fill it dynamically.
Ok next problem, one step harder ;-)
Now I have one selection screen for one ALV-Grid, but four radio buttons which control with which data the ALV gets filled (four different fieldcats, data tables and so on). Each Grid got an own HANDLE so that the layouts can be separated in four categories.
Now I want that by changing the radio button the individual standard layout for the chosen alv grid is getting filled.
This works fine when using it in selection screen output.
AT SELECTION-SCREEN OUTPUT.
   CLEAR gs_variant.
* Layout-Handles individuell für Klausel-Radiobuttons setzen
   IF     p_py IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLPY'.
   ELSEIF p_rh IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLRH'.
   ELSEIF p_aj IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLAJ'.
   ELSEIF p_sr IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLSR'.
   ENDIF.
* Layout holen
   CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
     EXPORTING
       i_save        = 'A'
     CHANGING
       cs_variant    = gs_variant
     EXCEPTIONS
       wrong_input   = 1
       not_found     = 2
       program_error = 3
       OTHERS        = 4.
   IF sy-subrc = 0.
     p_vari = gs_variant-variant.
   ELSE.
     CLEAR p_vari.
   ENDIF.
But unfortunately selection screen output is getting passed by EACH changing in the selection screen. This means when I try to clear the default layout in my parameter field, it gets refilled automatically with default layout. If I do a condition around the filling (only if not initial) the default value filling does not work fine in every case, e.g. when clearing the parameters field and then change the radiobutton -> then it does not get filled automatically.

How to change layout for list display in background

Hi All,
I want to change layout for the list display of tcode fbl1n when i execute in background. is there anyway to select our own layout when i execute in background. When i execute in foreground we can change the layout by selecting change layout button, but how it possible when in backgroung, is there any way please let me know.
Thanks in advance.
Regards,
Vishal

Hi,
Create a list variant by executing the program and changing the layout and saving..
Then use the "Layout" parameter in the selection screen and give the variant you created earlier...
Then while executing in background the list variant will be pickedup accordingly (given in the selection screen)..
Hope this helps...
THanks,
Naren
Message was edited by: Narendran Muthukumaran

New Layout in MIRO screen

Hi folks!!
I want to change the layout of Item List in MIRO screen, for this I created a screen variant Z_2_6310..., I have also changed the columns position to the required place such as Purchase Order from 5th column to first column and after that I save it.
But when I run MIRO and call my layaout there, instead of my required layout, the old standard layout is appearing.
Please tell me stepwise procedure of changing layout.
Best regards,

Hi,
Go to TC - OMLRLIST put you Transaction Code as - MIRO, Search for a already existing Variant or if you want to create a new one then put the name and click on create button (Make sure program name must be SAPLMR1M and screen no is 6310. Now for the case if you want to craete a new variant then click on create button a new screen will open now and there you will put the description as text and there are check button under required fields against each field with the technical name.
Now click on under required column against each of the field name (Make sure you are clicking on the required field under all the fields you want in you layout).
Try this if you not then let me know, I will be more then happy to help you out.
Note: Please give valuable points in order to encourage contributors to answer you queries.
Best Regards
Silky

How to change light greycloth startup screen

I have a mac mini running iOS X.8.2 For some time the startup screen was a medium dark grey cloth background. Some where along the line it changed to a lighter greycloth, ugly grey, how do I change the backgound on the startup screen back to its original color, or how can I use some other picture theme other thatn this laith grey cloth.
I have done a Safe startup and it seemed to improve the lag in the track pad, but the startup screen is the same light grey.
Any suggestions
thanks
Dick

Sorry no one followed up on this there is no simple way supported by Apple to change this, short of entering some commands in Terminal.
But like this article shows you can swap out the image file for another one in /System/Library/Core Services:
http://osxdaily.com/2010/01/25/change-the-mac-login-screen-background/
There is a file called DefaultDesktop.jpg, rename it and put a new one in and try it out!

How to change the attributes of screen fields dynamically

<b></b>
well i have created a table by name empmaster_data with following fields.
*emp_id.
*emp_fname.
*emp_lname
*dob.
*doj.
*dept.
*desig.
now using a single screen i want to create,change and display the information.even i am using save and exit button.
now i want to change the attributes of screen fields dynamically like active,input,output,invisible.

Hi,
Have Different Radio Buttons for the purposes what you have and use AT Selection Screen Output, Under the event Use loop at screen and with continue with your requirement.
Hope This Info Helps YOU.
<i>Reward Points If It Helps YOU.</i>
Regards,
Raghav

How to change the Dynamic Selection screen

Dear Freinds,
I have requirement where in on the selection of Dynamic Selections ( iam using PNP logical database) i want to add another fields , could any one tell me how to change Dynamic Selections as per my requirement.
please let me know .
regards
divya

Hi Prat,
I have done similar way and saved the view ( i.e se80> ediobject>table>table name > given all the tables required for me and i try to saved it is not allowing to save and giving message as empty view cannot be saved. Therefore i have selected the tables which have been added and made one by table and selected them . some how it got saved. Now when i added this name of the view in the custom report caterogy and executed my custom report and selected the > dynamic selections i found as empty and in debugging i can see all the 4 tables which i have mentioed while createing view are there . But i dint understood why the custom View is empty.
please correct me where i went wrong.
regards
divya'

How to change layout of new calculated item values?

Hi,
Is there a way on how to change colours or add a percentage symbol on the values of a calculated items?
I do not want to change the source measures in the criteria area I used to get the calculated items results.
Any idea?
Regards
Giuliano

I solved this by using an other approach.
Created a report and filtered the first resolts by certain value. Added a label.
Used combine with similar request and filtered again.
Created so many combines for the number of results I need to filters
In result columns renamed the label with a description which is a common denominator for all the labels
In pivot table, moved the main label to Rows and appled the sum
the reults is below
https://docs.google.com/file/d/0B0nRf4E3yBfpWS1WVjJjbWZyTG8/edit?usp=sharing
Regards
G

How to change controlbar to full screen?

function fullscreenOnClicked(e:MouseEvent):void {
     stage.displayState = StageDisplayState.FULL_SCREEN;
function fullscreenOffClicked(e:MouseEvent):void {
     stage.displayState = StageDisplayState.NORMAL;
function onFullscreen(e:FullScreenEvent):void {
      if (e.fullScreen) {
          // switch fullscreen buttons
          mcVideoControls.btnFullscreenOn.visible = false;
          mcVideoControls.btnFullscreenOff.visible = true;
          // bottom center align controls
          mcVideoControls.x = (Capabilities.screenResolutionX - 480) / 2;
          mcVideoControls.y = (Capabilities.screenResolutionY - 36);
          btnMidPlay.x = stage.stageWidth / 2;
          btnMidPlay.y = stage.stageHeight / 2;
          // size up video display
          vidDisplay.height      = (Capabilities.screenResolutionY);
          vidDisplay.width      = vidDisplay.height * 4 / 3;
          vidDisplay.x          = (Capabilities.screenResolutionX - vidDisplay.width) / 2;
    } else {
          // switch fullscreen buttons
        mcVideoControls.btnFullscreenOn.visible = true;
          mcVideoControls.btnFullscreenOff.visible = false;
          // reset controls position
          mcVideoControls.x = 0;
          mcVideoControls.y = 325;
          btnMidPlay.x = 240;
                btnMidPlay.y = 180;
          // reset video display
          vidDisplay.y = 0;
          vidDisplay.x = 0;
          vidDisplay.width = 480;
          vidDisplay.height = 360;
my player 4:3
above script is like below
but i want like this
How to change or build my script?

function onFullscreen(e:FullScreenEvent):void {
      if (e.fullScreen) {
          // switch fullscreen buttons
          mcVideoControls.btnFullscreenOn.visible = false;
          mcVideoControls.btnFullscreenOff.visible = true;
          // bottom center align controls
          mcVideoControls.x = (Capabilities.screenResolutionX - 480) / 2;
          mcVideoControls.y = (Capabilities.screenResolutionY - 36);
          btnMidPlay.x = stage.stageWidth / 2;
          btnMidPlay.y = stage.stageHeight / 2;
          // size up video display
          vidDisplay.height      = (Capabilities.screenResolutionY);
          vidDisplay.width      = vidDisplay.height * 4 / 3;
          vidDisplay.x          = (Capabilities.screenResolutionX - vidDisplay.width) / 2;
         mcVideoControls.width=stage.stageWidth;
     } else {
          // switch fullscreen buttons
        mcVideoControls.btnFullscreenOn.visible = true;
          mcVideoControls.btnFullscreenOff.visible = false;
          // reset controls position
          mcVideoControls.x = 0;
          mcVideoControls.y = 325;
          btnMidPlay.x = 240;
                btnMidPlay.y = 180;
          // reset video display
          vidDisplay.y = 0;
          vidDisplay.x = 0;
          vidDisplay.width = 480;
          vidDisplay.height = 360;
The above will change the width of the single movieclip, but it is not the way to do that, you should seperate your inner clips and make your controls to certain width and reposition the controls within that. otherwise you will face the issue after implementing the above.

How to change text on standard screen ML81N

Hi,
Goto ML81N and then look at the text(Net Value Incl. Tax) in Vals Tab,,
i want to know to change the text ,,,
is there someone who know how to change ?
Thanks & Best Regards,

> Goto ML81N and then look at the text(Net Value Incl. Tax) in Vals Tab,,
This field is jot a text field and it's a total of all gross prices entered for single service or multiple service in service line item. If you want to change this field, you need to change adjust the gross price of service line items entered.

How to Change layout in MIRO screen?

Similar Messages

Maybe you are looking for