How to change logical device names

Hi, I would like to change the logical device names for an external StorEdge. Booting into single user mode from a CD and deleting everything in /dev/dsk/ and /dev/rdsk/ as well as the path_to_inst file and then reconfigure booting doesn't work. Solaris remembers which physical device name was allocated to which logical device name. Haven't been able to find any info on how Solaris remembers this. I've thought of booting into init S from CD and renaming the logical device names but I would like to rename them to the next available controller which is c3 and which is probably already "reserved" for the unused onboard SCSI controller. Does anybody have any info on this ?

somewhere there is a page..
Sure !
Device Paths of Ultra [TM] 5, 10, 30, 60, 80,Sun Fire[TM](V)250, V210,V240,V440,V480,V880,V1280,Sun Blade[ TM] 100, 150, 1000, 1500, 2000, Netra[TM],Dual pci scsi card
A little bit dated, but free...
Michael

Similar Messages

How to change logical system name

hi,
there is no logical system name for business system in sld on integration tab.
this bus sys is based on tech sys which is configured as integration server.
plz tell me how to give the logical sys name there.
plz reply me it is urgent.
vijender

Jochen Gugel wrote:
> Hi @ll;
>
> at the tab in technical system the logical system name was correct.
> But it wasn´t shown at the integration tab of the business system.
> I solved this problem by deselecting the integration server, save this settings and reselect it afterwards.
>
> Kind regards
> Jochen
hello all,
I'm actually having the same issue. This issue is NOT the popular adapter-specific identifier problem where the business system in the ID needs to be compared with the SLD. This issue is that the within the SLD on PI 7.0 the Logical System Name of a given business system is not present although the logical system name of the specified technical system does appear. You cannot change the LSN of the business system since it relies completely on the LSN of the associated technical system.
I used Jochen's approach before and it worked, but i've tried this again since i'm having the same issue. Only now it doesn't work.
i solved this issue by deleting the old BS and recreating it
Thanks,
Edited by: Jason Ray on Jun 24, 2008 5:47 PM

I am using an original iPad that originally belonged to my wife. iTunes and Find My iPad recognize this device as Sally Fanta's iPad. How do I change the device name to John Fanta's iPad

I am using an original iPad that originally belonged to my wife. iTunes and Find My iPad recognize this device as Her iPad. How do I change the device name to My iPad

Look at this link.
Giving your former iPad to a spouse or family member: the quick guide
http://www.tuaw.com/2012/03/17/giving-your-former-ipad-to-a-spouse-or-family-mem ber-the-quick/
 Cheers, Tom

How can I change the device name on my iPad?

Is it possible to change the device name? I can find nothing in iTunes or Settings. My iPad was given to me with a name already assigned and I'd really like to have my name attached to it.

When attached to your computer, click the device name in iTunes and type the name you like.
http://support.apple.com/kb/HT3965

How do I change the device name in my iPod Nano?

Hello,
I need someone to help me change the device name showing in my iPod Nano. Right now, I guess, it is taking the user name of the computer where I registered my iPod and where my iTune is running. I would like to change this to the name of the real owner of the iPod. Thank you.

Plug the iPod in. When it shows up in the source list of your iTunes (the bit to the left of the screen), put your cursor over the name of the iPod in the source list and click it once. After a second or so, you should be able to edit the name.

How to Change Journal Header name to Custom Header Name while GL Importing?

Hello Experts,
I am in situation where customer wanted to keep their own journal header naming conventions to imported journals in Oracle GL for custom Journal sources.
As I know while importing journals, Oracle Creates the Journal Name based on the below mentioned logic.
"Journal Import creates a default journal entry name using the following format:
(Optional User-Entered REFERENCE4)(Category Name)(Currency)
(Currency Conversion Type, if applicable)
(Currency Conversion Rate, if applicable)
(Currency Conversion Date, if applicable) (Encumbrance Type ID, if applicable)
(Budget VersionID, if applicable). If you enter a journal entry name,
Journal Import prepends the first 25 characters of your journal entry name to
the above format"
But then How it is possible to only allow journal header Name to be used present in REFERENCE4 excluding all other string provided by Oracle? Instead of using omitted string custmoer wanted to keep their own parameters. Example - REFERENCE4.A.B.C etc.
Is it possible to solve this using seeded setup or modifying some hook packages or anything else?
As far as I know there can be one workaround to be use of updating journal header name after journal import being completed successfully for custom journal source. But only fear is Oracle doesnt allow updating the base table without API. Am I rght?
So it would be really great if anyone of you can suggest the best solution or best possible workaround.
Thanks

Duplicate - How to Change Journal Header name to Custom Header Name while GL Importing?

How to create logical file name

Could some one tell me how to create logical file names in BW , and when to use the transaction SF01.
Thanks

The following describes the procedure for creating a cross-client definition using the transaction FILE.
You create the client-specific definition in the same way using transaction SF01.
1.Call transaction FILE for cross-client file names.
2.Double click the dialog structure Logical File Name Definition, Cross-Client.
You access the screen Change View "Logical File Name Definition, Cross-Client": Overview

How does mpxio compose device names?

I'm just migrating from Hitachi DLM to mpxio for multipathing, and one issue for me are the cryptic device names mpxio uses.
I know how to find out the storage box and lun number via mpathadm / luxadm, but is there no easier way?
Can I somehow configure mpxio how to construct the device names?
With HDLM, the devices were /dev/dsk/c5t(box_WWN)d(host_lun)s0, with mpxio it seems to be /dev/dsk/c5t(long_random_number_string)d0s0..
I don't feel like reading the OpenSolaris sources for hints what this string consists of, but currently this seems to be the only option as documentation seems to be nonexistant.
Can anyone provide some insights?

I think I wasn't precise enough..
You are partially right, for local FC/SAS drives, the target string is the WWN
c10t5000C50007F846CBd0s0 -> ../../devices/scsi_vhci/disk@g5000c50007f846cb:a is the internal first disk on my T5220
but for FC-AL attached storage boxes, it becomes rather random-looking..
c10t4849544143484920373730313133343130333331d0s0 -> ../../devices/scsi_vhci/ssd@g4849544143484920373730313133343130333331:a
Logical Unit: /dev/rdsk/c10t4849544143484920373730313133343130333331d0s2
Vendor: HITACHI
Product: DF600F
Revision: 0000
Name: 4849544143484920373730313133343130333331
Initiator Port Name: 2100001b320fa84c
Target Port Name: 50060e801002c4d0
... I don't see how the WWNs in that path should be represented in the target name..

How to Change the Alias name for Internet user in SU01 tr code through cod?

Hi Guys,
             My req is we have to change the Alias name(SU01 tr code) for the existing users thru code.So can anybody tell me how to change the Alias name like which we do it in SU01 tr code thru code or FM.?
            Is there any FM for tha changing Alias Name?
Thanks,
Gopi.

Hello Gopi Anne ,
                             You can use the following FM / BAPI :
BAPI_USER_CHANGE
MY_BAPI_USER_CHANGE
For BAPI_USER_CHANGE :
You need to make use of the IMPORT parameter :
ALIAS     TYPE     BAPIALIAS                               User Name Alias
ALIASX     LIKE     BAPIALIASX                               User alias change flag
Thanks,
Greetson

How to change the folder name in the web report.

hi experts,
can anybody give me the solution, how to change the folder name in the web report. any help is appreciated.
waiting for ur favourable response.
thanks
suri

Hi Tony,
Yes, the business requires, only to change in the webreport only not in bex and roles. any suggestions will be helpful to me.
thanks
surendra

How to change data source name and context root during deployment

Hi,
Env:
WLS 10.1.3
JDev 11.1.1.6
Hudson
I need to deploy two instances of my ADF application on the same development enviroment. We are using Hudson to deploy. My question is how to change data source name and application context root before second deployment.
Kuba

I don't believe there is an inbuilt facility to do this.
Previously how I've done this is when checking files out using Hudson jovs, before the build I then use an Ant extension called XmlTask (http://www.oopsconsultancy.com/software/xmltask/) to modify the required XML files.
Can I ask why you're doing this in the first place please? Multi-tenancy? 2 versions of the same app?
CM.

How to change ASE server name in windows

how to change the server name in Adaptive server enterprise running on windows

Windows is going to require a few more steps if ASE is running as a service.
Update all registry entries containing <servername> with <newservername>:
HKLM\SOFTWARE\SYBASE\Server
HKLM\SYSTEM\CurrentControlSet\Services\SYBSQL_<servername>[ _BS | _XP ]
NOTE: Doing a registry search on <servername> will bring up a ton of other locations, eg, legacy entries, ControlSet00X, etc ... not sure if all of these have to be changed, too ...
NOTE: Haven't installed any of the latest ASE packages in windows so don't know if SAP's gone an changed the HKLM\SOFTWARE sub-branch name from SYBASE to SAP
=========================
In addition to Ryan's notes:
- any other sysservers entries that refer to the old servername (eg, loopback)
- any remote servers would need to update their external/remote logins, remote servers and/or proxy definitions ... as appropriate
- if the ASE is involved in replication then you're looking at whole 'nother can of worms ... off the top of my head ... rs_databases, rs_idnames, rs_repdbs ... and of course any repdefs/subs that include the ASE name ?
- obviously (?) any monitoring/maintenance/operational jobs ... documentation ...

How to change an account name?

Hello
How to change my account name?
Name is very old and needs an update.
Thanks,
Villem

Unfortunately, you can't.
Can I change my Skype Name in Skype for Windows desktop?
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

How to change the bluetooth name? in my pc,

Hi there!
How to change the Bluetooth name for my N70.
I can change it in my N70, but the first installed name still pops up on my computer. Can't find it anywhere so i can have the same name in my phone as on the computer. Is there some kind of registry that keeps the first name maybe??
Any ideas?
Owned: Nokia 1600 - 3120 - 5110 - 6110 - 7110 - 6310i - N70 - N72.
Using now: 6310i & N70 - N72

I am not sure about how to change SERVICE_NAME in PL/SQL Developer (if at all it can be done in that ), but you will have to change the SERVICE_NAME in the TNSNAMES.ORA file.
1. Locate the entry for PLSExtProc in the file tnsnames.ora at:
$ORACLE_HOME/network/admin/tnsnames.ora
2. Change the SERVICE_NAME = ORCL
3. Save and reconnect
Aalap Sharma :)

I have a MacBook Pro, how to change the computer name in the "Find Iphone"

I have a MacBook Pro, how to change the computer name in the "Find Iphone"?

Thank you for help! I was inattentive reading your answer. The thing which confused me was that I noted in blue. I had to just write in a red box and close the configuration window.

How to change logical device names

Similar Messages

Maybe you are looking for