How to change name of software component version in IR and ID?

Hi All,
I have a scenario in which 50 interfaces are there.All interfaces are working fine and we are in Testing stage.
I need to change name of Software component which I have used in IR.
I tried with release transport. I am able to pass all my mapping programs and everything under new software component name. But in ID all configuration objects contain IR objects (Like interface mapping) with old software component name.
Do I need to change everything in ID manually or is there any other way for this?
Thanks in advance.
Warm Regards,
Gouri

Gouri,
If you check this blog , you are able to transfer data even without IR content, i.e, there is no message interface , no namespace in IR and stil this works. Reason, there is no validation if the message interafce exists in the IR. In the runtime the SOAP Header is filled with the interfacename and namespace and it uses these values.
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
Likewise, irrespective of which SWCV the interface name and namespace is, things will work fine as long as they exists in the IR in your case.
The SWCV is a means to group objects, it might be displayed while doing the manual configuration but it doesnt matter even if you just key in the values without using the help.
Things will work fine.
Regards
Bhavesh

Similar Messages

How findout who created a software component:

I am in a situation where I have to findout which user (userid) created a software component in SLD and imported them into IR and created many namespaces?
Is there a way to find out?
Regards,
N.S

hi,
open IR click on the software component version
then choose properties from the software component version's menu
and then you see who changed the SWC
(created namespaces etc)
Regards,
michal

Can we change the Software Component Version's Name?

Hi everyone,
Can we change the Software Component Version's Name in the Integration Repository? If we can, how can we change it?
Regards,
Nick

hi Nick,
Procedure:
1. create a new software component in SLD
2. create a new version of this software component in SLD
3. import in into the repository
4. try using release transfer to transfer objects
from old on to the new one
http://help.sap.com/saphelp_nw04/helpdata/en/e8/e8573ba5f13048be50532fc3fcea9c/content.htm
5.delete the old software component
/people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
BTW
do not chage it in the database!
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

How to update objects of sub software component version?

I have two SWCV, say SWCV_BASE and SWCV_DERIVE, SWCV_DERIVE is based on SWCV_BASE. So the objects which belong to SWCV_BASE are also availabe in the BASIC OBJECTS directory under SWCV_DERIVE.
My question is:
When I make some change in SWCV_BASE, how to reflect this modification to the SWCV_DERIVE? Currently whatever I do to SWCV_BASE, the change can't be transferd to BASIC OBJECTS in SWCV_DERIVE. Does anyone know how to syncronize the objects in SWCV_DERIVE to get the newest ojbects in SWCV_BASE.
MUST REWARD FOR GOOD ANSWERS.
Regards,
Hui

Hi, Michal
I forget to activate it. Yes, it's really... Forgive me:)
I have another question which has confused me for long time. It would be apprecaited if you could give me some light. According to sap documentation, through sub software component version we can reuse or do some customer modification to some SAP XI OBJECTS. But when I import some SAP software component version like SAP BASIS 6.20, I find nothing inside it. So when, how and where can we use SAP XI OBJECTS?
See the scenaio below:
An R/3 system is going to transfer data with a database.
R/3 (IDoc) <-> Database (JDBC)
IDocs can be devided into two types:
1. idocs shipped by SAP.
2. customized idocs.
In my understanding, when I import some sap software component version like SAB BASIS 6.20. I should be able to find the SAP shipped idocs. But nothing is there.
So Should I import the SAP shipped idocs into the SAP software component version? Then create a customized software component version based on SAP component version, where I import the customiyed idocs.
Could you give me some advice?
Thanks in advance.
Regards,
Hui Wang

How to copy all namespaces from one software component version to another

i want to make a new software component version of the same procuct in the integration builder(DESIGN),
how can i do that,
i mean to say, after making it in SLD, and importing it into design, how can i copy all the name spaces present in the previous software component version into the new software component version

K remember while transporting only active objects can be transported and if the object you want to transport is not active then last active version will be transpoted.
While transporting design objects prerequisite the s/w comp version has to be same.
Go through this it will answer every issue
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/93/a3a74046033913e10000000a155106/content.htm">TRANSPORTING XI OBJECTS</a>
*CORRECT IF I AM WRONG*
Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*

Software Component Version cannot be changed after Importing Objects

Hi Gurus,
I was trying out the import export function of XI. I export a message mapping and then re-import it back into XI. However, after doing that, it is telling me that the Software Component Version cannot be changed. I'm now unable to make any changes to any of the objects.
Is there anyway to go ard this?
Thanks in advance.

Hi,
I tried ticking the check box. But its giving me the following warning
Originality indicator for the software component version set later Ensure that the software component version only contains one original repository
i ignored the error and activate the change list.
However, im still unable to make changes. I tried ticking the "Original Objects" as well but still unable to change.
Thanks.

How to delete Software Component Version From I.R

Hi,
Any Body tell me how can i delete Software Component Versions From Integration Repository there is no delete option showing on Right click. i already deleted dependent components thanks in advance.
Thanks
kiran.B

Hi Kiran,
Check this blog. It is stating how to delete SWCV :
<a href="/people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder:///people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
Regards,
Subhasha Ranjan

How to import the software component version in PI7.1

Hi Experts,
I am new to PI7.1 . How can we import the software component vesrion in PI 7.1.
Regards
Santosh

Hi,
go to Tools ---> Transfer form System Landscape Dir ---> Import Software component vesrion
Sorry, above method is for XI3.0
Regards,
Sarvesh
Edited by: Sarvesh Singh on Dec 30, 2009 7:03 PM

Migrate from XI 3.0 to PI 7.11 software component version question

Hi,
We are migrating from XI 3.0 to PI 7.11. there are about 2000 receiver determination, etc.
We have to assign for every receiver determination, interface determination etc a new software component version.
does anyone know how to do this automaticly.
regards meinhart

The SWVC in receiver determination is not relevant for service interfaces of type "XI 3.0 compatible".
So you can leave the fields emtpy.
The technical background for this SWVC in receiver determination is finding the correct operation for a message.
But XI 3.0 compatible service interfaces have only one operation with same name as the interface.

Software Component Version

Hi Friends,
I maintained two Namespaces(say Name1, Name2) under a Software Component version.
I developed a scenario under Name2. But i found it wrong. So I deleted all the objects in it like interface objects, mapping objects and also ExchangeFaultData, ExchangeLogData by mistake. Now iam trying to delete the whole namespace from SWCV. But Iam unable to go to the edit mode of SWCV and also iam unable to activate the SWCV.
Please do help me to delete the namespace under the SWCV

Sorry Typing Mistake.
First Delete all the objects that u have created in that namespace. Once that is done activate the scenario.
After that delete Exchange log, Fault data type. Then go to software component and delete name space. Save the SWC component and then activate the SWC.
Let me know if u face any problem.
If u delete any object by mistake, u can go to change list, select object and say reject change.
-Gouri

Proxy error- unable to find software component version for namespace-

Hi all,
I need help regarding proxy.
I am using SAP standard package for one integration PI 7.0 to SRM.
Here we need to use the datatype enhancement for adding some fields. So I create one extension_datatype in the datatype enhancement and add the fields .
( I am using Inbount interface, where I am adding the new fields in PI)
Now when I go to SRM system and Run SPROXY system to regenerate the Proxy. So that It can reload the New fields.
Then it reloads and We activate the same.
Now at one place when I clicked the data type enhancement object its giving the error that unable to find software component version for namespace" . I did not understand why its giving the error. I added the new fields in the existing running datatype enhancement. and reload the reproxy.
I have one more datatype enhancement object in the same software component and in the same name space but its not giving the error.
Please help , how to resolve it asap.
regards
ram

1.the datatype enhancement object may not be activated in the same software component .
for this try these -
after creating your data types and designing part. First close all the developement objects windows.
then click on your sw component which you have created and activate it very first.
then you will be able to activate all other objects
or when you start activating your data types a new window with list of the objects which you want to activate opens
in this new window you can see your sw component as the very last object select it first and activate it
2. update the cache in both system
i think these 2 reasons.u try it.

SAP ECC 6.0 Software component Versions or Product versions in XI (SLD)

Hi All,
please, let me know the solution for this problem,
Curently we r using PI 7.0 SPS 14 kernal Version 179.
Unable to find out SAP ECC 6.0 Software component Version or (Product version) in SAP XI 7.0 SLD.
how to solve this issue....
Advace thanks.
Mahesh

Hi Volkar,
I am doing Plant driven procurement service enablement scenario by using XI 7.0, for this,
we are integrating MM & SRM SUS Through XI 7.0 (MM -- XI-- SRM SUS).
For doing this Scenario,
1. Downloaded XI Content for SRM
2. Imported XI Content into the IR
3.After importing, Plan_Driven_Procurement_SupplierEnablement Scenario was enabled.
Here, MM side SWCV is R/3 4.6 is available by default. but in my case i need to change to ECC 6.0(bcoz,currently we r using ECC 6.0 version )
In SLD, there is no ECC 6.0 version.
So, how to solve this issue.
Thanks in Advance.
Mahesh

XI CTS+ Error: Software component version missing

We have CTS+ set-up on our XI systems but there appears to be a problem when importing a transport into the target system.
From the transport log on the ABAP side, the error that we're getting is:
class java.rmi.RemoteException:
com.sap.aii.utilxi.misc.api.ResourceException: Software component version missing
I suspect that there are some parameters missing in the SLD but am unsure exactly which ones.
I looked into the document 'How To... Configure Enhanced CTS for SAP NetWeaver Exchange Infrastructure 7.0 SP13' but this did not help.
Many thanks for any assistance.
Best regards,
Matthew Harris

Yaghya,
Thanks for that information.
(Given that I am also the developer of the scenario, finding out the name of the software component was easy!!)
However, the cause of the error appeared to be down to having both Repository and Directory content contained within one transport request.
Once these were seperated out into individual transport requests then individually imported (Repository content first), the error was resolved.
Best regards,
Matthew

Can not view a Software Component Version in Enterprise Services Repository

Hello,
I'm trying to import in ESR the software component version created in the SLD. I'm using SAP PI 7.3.
Into to work area select Software Component Version and click on checkpoint Import from SLD. Click in bottom Display (List of Software Component Versions) and it show me the list but cannot view the Name of the SWC created.
I cleared the cache (Environment - clear sld data cache) and the result it's the same, not show the SWC the I created.
Do you have any idea?
Thank you in advance.
--erva

Hi,
as it's a new installation, you certainly missed something. have you did controls of Readiness Check doc and tcode SLDCHECK ([see PI 7.1x oss note|https://service.sap.com/sap/support/notes/1143810]).
and check these post installation controls (but it's for PI 7.1): [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60d2a693-9504-2b10-5ba7-82964bd8370e?QuickLink=index&overridelayout=true]
Mickael

Unable to read software component version from System Landscape Directory "

I've worked in past creating/importing SWCV, but this is new system PI7.0 and stuck.
A) Is my understanding on resolution correct?
Should I go and apply notes 940309 and create client copy of existing client 001
 OR
change role of client 001; SXMB_ADMIN -> 'Integration Engine Configuration' to 'Integration Server'
I have no problem in using client 001 as Integration server, all I want is import of SWCV to work. Thanks. Appreciate the help.
B) Here is what I have done and the error:
1) Followed weblog below and created product, software component, technical system, business sytem in SLD.
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
2) When I import the SWC from integration repository getting error
(Unable to read software component version from System Landscape Directory "server:5<system number>00").
C) Pointers used from the forum to debug the issue, but still no luck
Below are the points checked from the forum and all steps are correct, but still have issues with the import
1) check the RFCs SAPSLDAPI, LCRSAPRFC, connection test pass as the program ID registered with Jco
2) T-code SLDCHECK no errors (followed http://help.sap.com/saphelp_nw04/helpdata/de/78/20244134a56532e10000000a1550b0/content.htm)
3) T-code SLDAPICUST got user PIAPPLUSER, pwd is correct (reset the pwd)
4) logged using PIAPPLUSER http://server:port/sld and it works
5) One of the weblog SLD Check Failed (LCR_LIST_BUSINESS_SYSTEMS function doesn't work) referred to apply notes 940309
Notes: 940309
You are installing 'SAP NetWeaver 2004s SR1 ABAP+Java' Usage Type 'NetWeaver Process Integration (PI)'.
You don't want to use the default client 001, but another client as Integration Server.

applied portion (PIPostInstallProcess) of OSS notes 940309 and it resolved.
Note:
I still retained client 001 and didn't do client copy as mentioned in the notes. The wizard based CTC tool helped. Here are the details if someone has similar issue and want to know further details:
A NetWeaver Process Integration (PI) Installation (ABAP+Java) has two parts: Installation and configuration. The former is done by the Installer, the latter by the 'Central Template Configuration' (CTC) Tool.
http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
1. Call the wizard-based configuration tool as described in Configuration Wizard.
 2. Select the scenario PI and the task PIPostInstallProcess.
 3. Choose Execute.
A list of the steps to be executed by the wizard is displayed.
 4. Choose Install.

How to change name of software component version in IR and ID?

Similar Messages

Maybe you are looking for