How to change number of records displayed in Web service: Query_view_data

Hi experts
I´m using webservice Query_view_data to fill a Xcelsius model with data.
The Bex Query contains appr. 300 records but the webservice returns only 50 records. When I test it it says "displaying 50 of 312 records".
When I tried ABAP FM RRW3_GET_QUERY_VIEW_DATA it gave all 312 records.
Does anyone know how I can change this setting so that all 312 records are displayed in the webservice?
Best Regards
Kenneth

Mani,
I have changed the properties of the chart as you said and gave 4 decimal places. If my actual data value is 0.787989, i would expect it to result 0.7879 but the outcome is 0.7800. It is replacing the other two decimal places with 0's rather than the actual number. Is this a bug in OBIEE or am i doing anything wrong?? Is there any other way to do this. Please let e know...
Thanks,
vnk
Edited by: user8708843 on Aug 18, 2010 8:03 AM

Similar Messages

Change number of record displayed for a single item alone

Hi,
I have a single data block with few items. Is it possible to make one item in the block as non-database item and make the display of record in the item alone to show multiple lines.
i.e. All other items in the Data block shows single record, whereas this particular item should shows 10 records.
Is this achievable?
Or should i have to put that item in a separate data block and choose the data block property to "Number of records displayed" as 10?
Thanks,
Yuvaraaj.

983448 wrote:
Hi,
I have a single data block with few items. Is it possible to make one item in the block as non-database item and make the display of record in the item alone to show multiple lines.
i.e. All other items in the Data block shows single record, whereas this particular item should shows 10 records.Yes you can. But i will say re-check your design.
Hamid
Mark correct/helpful to help others to get right answer(s).*

How to set the number of records displayed at run time

Is it possible to set the number of records displayed block property at run time? The built-in 'GET_BLOCK_PROPERTY' can retrieve the number of RECORDS_DISPLAYED. But I can't find SET_BLOCK_PROPERTY to set this property. Is there anyway I can set this property programmatically? Thanks for any suggestions!

Bookmark Go to End
goal: How to vary the number of records displayed in a block
programmatically
fact: Oracle Forms Developer
fix:
Block property 'Number of Records Displayed' can not be changed during runtime
using SET_BLOCK_PROPERTY. However, it is still possible programmatically change
the visual appearance of the form so that it creates effect of changing this
property. To achieve such an effect follow these steps:
1. in Forms Builder, in the multirecord block define the new set of items.
The simplest way is to copy/paste the original item and rename created item.
2. set properties of these new items so that they are the same as the properties
of the original items. If these new items were copied from original items
then properties are already the same. Modify following properties
'Database item' on new items to value 'No'
'Synchronize with item' to the value of the original item
'Number of Items Displayed' to desired value.
'Visible' to 'No'
In other words, these new items are mirrors of original items.
3. code event, which is meant to trigger the change in block appearance.
This code should use SET_ITEM_PROPERTY built-in to set properties
like 'VISIBLE', 'ENABLED', 'NAVIGABLE', 'UPDATE_ALLOWED' and others
to desired value for items which are about to be displayed, then
move cursor to one of these just displayed items with GO_ITEM built-in
and then hide the previously displayed items.
Example:
Assume that the block is built on SCOTT.DEPT schema. Following will
change the set of displayed items
set_item_property('dept.mdeptno',visible,property_true);
set_item_property('dept.mdname',visible,property_true);
set_item_property('dept.mloc',visible,property_true);
set_item_property('dept.mdeptno',enabled,property_true);
set_item_property('dept.mdname',enabled,property_true);
set_item_property('dept.mloc',enabled,property_true);
set_item_property('dept.mdeptno',update_allowed,property_true);
set_item_property('dept.mdname',update_allowed,property_true);
set_item_property('dept.mloc',update_allowed,property_true);
set_item_property('dept.mdeptno',navigable,property_true);
set_item_property('dept.mdname',navigable,property_true);
set_item_property('dept.mloc',navigable,property_true);
go_item('dept.mdeptno');
set_item_property('dept.deptno',visible,property_false);
set_item_property('dept.dname',visible,property_false);
set_item_property('dept.loc',visible,property_false);
Regards,
Monica

Rows Per Page doesn't affect the number of records displayed

I just updated from 3.2 to 4.0 this morning. When I change the Rows Per Page value in the action menu the report doesn't change and the number of records displayed stays at 10. The report has ~6000 records. I edited the report attributes and add the rows selector to the IR search bar. This doesn't change the behavior either. I noticed that if I change the rows per page in the action menu then the drop down select list is updated, but the report still doesn't change from 10. I tried paging to the next set of results and it still remains at 10.
Has anyone else experienced this problem?
Tony

Yes, Tony, I've seen this in several versions of APEX. In most cases, simply starting a new session was enough to force APEX to refresh the page and grab the new set of pagination directives. If that doesn't work, please give more info like: what type of report you are doing and what the Pagination values are. Please note the following:
Report Template
Pagination Scheme
Enable Partial Page Refresh
Display Position
Number of Rows/Number of Rows Item
Maximum Row Count

How to change IDoc control record

Hi all,
How to change the control record of the ORDERS (purchase order) outbound IDoc? The partner type and partner number is always the logical system. I want to change it to other partner type, e.g. KU.
Is there any user exits availalbe?
Thanks!
Regards,
Hui

Hi,
Option-1
User user-exit EXIT_SAPLEINM_001 of enhancement MM06E001 to change the control record.
But make sure that whatever control record you put here, there should be a corresponding partner profile exist in partner profile ( WE20 ).
Option-2
You are saying that you are always getting 'LS'. This is because the output type is only configured with partner function 'LS'. We are using Purchase order idoc and we generate our all idocs for partner type 'KU'.
To do this, follow these steps.
- go to transaction NACT
- enter application 'EF' and select 'maintain'.
- select the output type you are using in PO for EDI.
- with this output type selected, select "partner functtions" from left hald side options.
- Hit "new entries" button on the top
- create an entry with, MEDIUN = 6 (EDI) ; Funct = VN ( vendor )
- Save your settings and come out
- Now on WE20, remove the partner profile you have created under partner type 'LS' and instead create a same partner profile for your vendor under partner type "KU".
Now it is upto you to decide, either to user the user-exit i have mentioned to change the control records OR create a outout config and partner profile for "KU".
Let me know if you have any question.
Regards,
RS

How to restrict number of rows display using ig:gridView

Hi
All
How to restrict number of rows display using <ig:gridView datasource="{mybean.mylist}">
i am getting 10 rows using data_row . i wanna show only first 5 rows .
pageSize ="5" will be ok . but it displays remaining rows in next page. but i want to display only first 5 rows . is there any attribute to restrict number of rows.
thanks
rambhapuri

I have no idea which component you're talking about. If want to discuss here about a non-Sun JSF component, then please mention about the name, version and build in detail. You can also consider posting this question at the website/forum/mailinglist of the component manfacturer rather than here. At least I can tell you that the Sun JSF h:dataTable has the 'rows' attribute for that. I can also suggest you to just take a look in the TLD documentation of the component in question. There should be all possible attributes listed with a detailed explanation about the behaviour.

How i get number of record in repet frame?

Hi,
How i get number of record in repet frame?
Regards
Jomar

Jomar,
you can use Summary Columns in the Data Modell. Create them on group higher that your wished group (so on the pane for an first group of a query), use as Source the primary column and as reset at the group, where the summary column is located.
If you hide some instances via format triggers, that you could use a counter inside the format triggers to count the rows.
Regards
Rainer

HT204380 how to change number in FACETIME..????

how to change number in FACETIME..???? very urgent please some1 do REPLyyy....

Your FaceTime number is your phone number. I don't believe you can change it without changing your phone number.

How to increase number of rows display in ESS

Hi All,
how to increase number of rows display in ESS applications especially in Time approval inbox from standard display of 5 rows to say like 20 rows? is there a quick way to do it?
Thanks all
Murty

Kalpesh,
it is actually in web dynpro view, I have seen this setting and it doesnt give option for increasing default number of rows in web dynpro application. Table is dynamically constructed in web dynpro implementation and I have the hard time finding out., Any help is appreciated in these lines,
Thanks
Murty

How to change the default operators in sap web ui Search screen?

How to change the default operators in sap web ui Search screen?
For eg. Using advance search option , I have some fields with default operators like equals, contains,is between, is less than and is greater than. I don't need all these operators for this field.
I need only "equals" operator. How do i remove the rest of the operators?

There is a view cluster crmvc_dq where all the standard setting is present related to you r issue. Please try if you can modify that, that way you will avoid the code.
Incase you are not able to make any changes there then in that case you have to redefine the method GET_DQUERY_DEFINITION () of the IMPL class to delete the operators for a particular serach field.
Regards,
Harshit

How to change the folder name in the web report.

hi experts,
can anybody give me the solution, how to change the folder name in the web report. any help is appreciated.
waiting for ur favourable response.
thanks
suri

Hi Tony,
Yes, the business requires, only to change in the webreport only not in bex and roles. any suggestions will be helpful to me.
thanks
surendra

How to change Rendering Extension in sql server Reporting Services based on User Permissions

Hi,
I want to provide SQL server reporting services rendering extension based on user Access.
For Example
User1 can have options of Rendering to EXCEL and PDF
User2 can have a option of CSV
i read one article which is useful for report basis rendering extension changes. but i want to give user basis rendering options.
http://www.mssqltips.com/sqlservertip/3569/how-to-change-rendering-extensions-in-sql-server-reporting-services/?utm_source=dailynewsletter&utm_medium=email&utm_content=headline&utm_campaign=20150406
Thanks in advance.
GVRSPK VENI

You can use a data driven subscription for that
Maintain a table with rendering extension information for various users ie their AD user login. Then setup a data driven subscription based on table values
You will be creating a dataset with query for retrieving userid as well as rendering extensions and then just set the value as Get value from database for render Format and To properties
For more details refer
http://beyondrelational.com/modules/2/blogs/101/posts/13460/ssrs-60-steps-to-implement-a-data-driven-subscription.aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

How to keep multiple function modules under one Web service

Hi Experts,
I have Three RFC function modules and i need to create one web service for these three RFC function modules. I know How to crearte a web service for one function module.
please suggest me How to keep multiple function modules under one Web service.
Thanks in advance
Lakshminarayana

Hi Lakshmi,
The best way to do it is to assign all the three RFC Enabled FM's to one function group. Later on the top menu in Utilities you get an option to Create a Webservice from a Function Group.
You can create one single Webservice using all the the 3 FM's.
I hope this helps.
Thanks,
Manu

How to use a cascading LOV as a Web Services Consumer?

How to use a cascading LOV as a Web Services Consumer?
We are trying to populate a prompt programmatically.
Our program is a Web Services Consumer.
As an example we use Island Resorts Marketing
The cascading LOV for City is
Country -> Region -> City
The City object is key-aware to the customer table
The query is
Customer | Revenue
(where) City = [prompt]
In order to make the key-awareness work, we must select the value (rowIndex) from the LOV
When we run our program below, the LOV for City is not populated, as expected since we must first select the Country, then the Region.
The code snippet below shows that the LOV for Country is populated. We have no idea how to go from there.
Any hint will be immensely appreciated.
Let us know if anything is unclear in the code.
Source
RetrieveMustFillInfo retrieveMustFillInfo = RetrieveMustFillInfo.Factory.newInstance();
        RetrievePromptsInfo retrievePromptInfo = RetrievePromptsInfo.Factory.newInstance();
        retrievePromptInfo.setPromptLOVRetrievalMode(PromptLOVRetrievalMode.ALL);
        retrievePromptInfo.setRefreshReturnedLOVs(true);
        retrievePromptInfo.setReturnLOVOnMustFillPrompts(true);
        retrieveMustFillInfo.setRetrievePromptsInfo(retrievePromptInfo);
        // *-- need the "Refresh" action to get the .promptToBeFilled
        Action[] boActions = new Action[1];
        boActions[0] = Refresh.Factory.newInstance();
        try {
            documentInformation = reportEngine.getDocumentInformation(Integer.toString(infoObject.getID()), retrieveMustFillInfo, boActions, null, null);
            m_Token = documentInformation.getDocumentReference();
        } catch (Exception ex) {
            System.out.println(GetWSError(ex));
            return;
        if (documentInformation.getMustFillPrompts()) {
            PromptInfo[] promptInfoS = documentInformation.getPromptInfoArray();
            for (PromptInfo promptInfo : promptInfoS) {
                System.out.println(String.format("Prompt '%1$s', hasLOV=%2$s", promptInfo.getName(), (promptInfo.getHasLOV() ? "Yes" : "No")));
                if (promptInfo.getHasLOV()) {
                    LOV boLOV = promptInfo.getLOV();
                    for (Value boLOVValue : boLOV.getValuesArray()) {
                        System.out.println(String.format(" LOV item '%1$s' RowIndex=%2$s", boLOVValue.getColumnsArray(0), (boLOV.getRowIndexed() ? boLOVValue.getRowIndex() : "")));
                System.out.println("--End LOV");
                PromptInfo[] promptInfoS2 = promptInfo.getPromptToBeFilledArray();
                if (promptInfoS2.length > 0) {
                    PromptInfo promptInfo2 = promptInfoS2[0];
                    System.out.println(String.format(" linked to %1$s", promptInfo2.getName()));
                    if (promptInfo2.getHasLOV()) {
                        LOV boLOV2 = promptInfo2.getLOV();
                        for (Value boLOVValue : boLOV2.getValuesArray()) {
                            System.out.println(String.format(" LOV item '%1$s' RowIndex=%2$s", boLOVValue.getColumnsArray(0), (boLOV2.getRowIndexed() ? boLOVValue.getRowIndex() : "")));
                        System.out.println("--End LOV");
Result
Prompt 'Enter value(s) for City:', hasLOV=Yes
--End LOV
linked to Enter value for Country of origin
LOV item 'Australia' RowIndex=6
LOV item 'France' RowIndex=2
LOV item 'Germany' RowIndex=4
LOV item 'Holland' RowIndex=7
LOV item 'Japan' RowIndex=5
LOV item 'UK' RowIndex=3
LOV item 'US' RowIndex=1
--End LOV

Hi,
Refer SAP Note 1278947. You would require a Service Market Place logon to access this article.
Let me know if this helps.
Regards,
Shreyans Surana

How to save my photo library in a web service.

Hello:
In first place sorry for my poor english...
I would like to know how to secure my photo library in a web service. I have 100gb free with my internet provider and i would like to use it. The problem is that i don´t know wich is the folder that i have to duplicate in the web and where to find it.
I´ve been looking in the apple help services but i only find help for mobile me or time machine.
Thanks in advance...

If you want to back up your Library to the Web then you need to back up the iPhoto Library in your Pictures Folder.
However, many people complain that it can take days for the upload - and in the event of a problem - download to restore.
Regards
TD

How to change number of records displayed in Web service: Query_view_data

Similar Messages

Maybe you are looking for