How to change ringtone when connected via bluetooth

When the Z3C is paired via bluetooth with my car audio system, the Z3C playes a different ringtone then the one which I have set as default.
How can I change (set) the ringtone when the Z3C is connected in my car?

I'm not to sure but I would imagine it has something to do with Smart connect and how it's setup when paired
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Similar Messages

Phone/car volume mismatch when connected via bluetooth

I use Audible to listen to books on my Samsung Galaxy Note 2 in my car while connected via Bluetooth. My problem is that I must turn the car stereo volume extremely high in order to hear adequately. This results in getting blasted by the car stereo when the smartphone is not connected because I never remember to turn it back down. Is there a means to get the phone volume and car stereo volume more in sync?

Bump. Anyone from Sony planning to do anything about this or is it new phone time?
Be a shame if its the latter but if the software doesn't function correctly for something basic like BT audio the phone is effectively a brick.

Disable Blackberry Assistant greeting text when connecting via bluetooth

My Z30 updated to the latest OS 10.3.1.1581. Now whenever in connects to Ford Sync via Bluetooth I get a text message greeting telling me what day it is. This is getting annoying real fast. Can anyone direct me to how to disable the greeting?

I’m getting the same thing on my Z10 “incoming text message from BlackBerry Assistant”. I’ve deleted a few dozen of these messages off of Microsoft Ford Sync already. They just keep coming every time I connect my Z10. I can’t find any way of stopping it either. Checked all my options within Sync and my Z10. Does someone out there know how to turn this initialization message OFF?

Pc & Laptop: How to share the internet connection via Bluetooth?

Hi,
I've recently bought a laptop and i'm having trouble figuring out how to share the internet via bluetooth from my desktop pc. I can connect using the Personal Area Network (PAN) but i'm not sure how to send the internet. whatever i've been told to try so far as all failed.
i'm sure this questions been asked quite alot, so i'm sorry to ask again)
could someone tell me a step by step setup?
(Thanks, It's much appreciated)

Hi
Its takes longer to describe the full installation how to use the BT for internet sharing.
I have found this website with a installation instruction for Windows 2000.
The dialogs for Windows XP might be a little different, but the configuration will be the same.
http://www.geekzone.co.nz/content.asp?contentid=1285
However, check it. Its useful.

How can I transfer photos from LG phone to mac notebook. Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

How can I transfer photos from LG phone to mac notebook. Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

Just open your LG volume up likes its an external HD and drag all photos onto a folder in your macbook Air.

I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help

I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help... I can't pair any device because they can't find whitin themselves.

Wmorlac wrote:
I have the new IPad and can't connect via bluetooth to any of my apple devices...
Correct... See Supported Bluetooth Profiles Here...
http://support.apple.com/kb/HT3647
Suggest you check the User Guides of your Devices to find the Method of what you are trying to do

How can i use my iPhone 4 and connect via bluetooth with my macpro

how can i use my iPhone 4 and connect via bluetooth with my macpro

The only way that you can connect your iPhone to the mac is to use it for a "Wi-fi hotspot" meaning that you can use the celluar connectivity of your phone to connect your computer to the interent.
Do you mean a MacBook Pro of the desktop MacPro?

My MacBook Air and my iPhone are coupled but they cannot connect via bluetooth. How can I solde this ?

My MacBook Air and my iPhone are coupled but they cannot connect via bluetooth. How can I solde this ?

For what purpose are you trying to connect them?
The only supported Bluetooth function between a Mac and iPhone is internet tethering.

How to avoid syslog messages when connecting via Perl SAP::RFC ?

Everything works fine with Perl SAP::RFC calls to our ERP 6.0 thanks to Piers Harding except numerous entrys in the SAP-syslog (SM21) which make that a little bit unclearly.
Tracing is set to "0" when connecting via new SAP::Rfc( ASHOST .. , TRACE    => "0" ) from Perl.
The syslog - entries look something like this:
07:46:10 DIA 000                          R1 M Trace vom Remote Client übernommen.
07:46:18 UP2 062 011 MYRFCUSER              R1 L Trace für Benutzer MYRFCUSER deaktiviert.
Even when tracing is set to "0" there is also a *.trc-File in the directory where the perl script resides on RFC client side.
In this trace file one can see the followig excert:
>>> RfcOpenEx ...
Got following connect_param string:
   TRFC=0 LCHECK=0 UNICODE=0 PASSWD=******* USER=MYRFCUSER LANG=DE *TRACE=CLIENT=011* ASHOST=myhost SYSNR=00
Send RFCHEADER: 01/LIT/IEEE/SPACE/1100
Send UNICODE-RFCHEADER: cp:1100/ce:IGNORE/et:5/cs:1/rc:0x00000023
Could someone please give me a hint what is going wrong here.
Thank you.
Martin

May be set TRACE->'1' and got tracing messages ?

10.6.1: Can't resolve FQDN when connecting via WLAN / Airport Base Station

Hi everybody,
after hours of work and having read many helpful topics in this forum (and other) I've successfully setup a Single Signon Environment for my home office. It's a dual core macmini server running 10.6.1 and only mac clients.
The server is connected via switch to my airport extreme base station. This airport station uses PPPoE to connect to my ISP and it has the DHCP service running, handing out the clients' IP addresses. The server and the switch have all static IP addresses.
My issue is the following:
Whenever I connect via wifi or vpn using my MBP, I am not able to "bind" to the server (via system preferences : users : login setting) using the FQDN. The error is "can't resolve address. -2200" Instead it only finds myserver.local - and then I am able to set up my wifi connected client.
However, when I set up the client with the .local address I am unable to get a kerberos ticket for my users. The ticket viewer says, that it can't resolve the address for myserver.mycompany.private
I was able to get afp or ical to work on my vpn or airport connected clients when I used the server's IP address instead of a domain name - but only with kerberos turned off and with other problems.
I've heard that if everything is configured right, the server should show up in every clients' sidebar with its FQDN and NOT the bonjour name. Right now it shows only the bonjour name - even on the clients connected via Ethernet.
The other strange thing is that when I log into my client system I still have to authenticate with ticket viewer in order to get my kerberos ticket. Usually Single Signon should work with the login window, right?
I really don't know what else to do. I double checked my DNS settings and everything seems ok. I entered the FQDN of the my server in the airport stations' DHCP settings as "LDAP server" - nothing changed...
Do I need to use the server's DHCP service instead of the airport station's DHCP? And if I do this, how to I turn off airport's DHCP? It does not seem to be possible when connected via PPPoE to my ISP.
I am unsure what to do in order to get things to work. Anybody out there who can help?

Hi Davidh and thanks for posting!
I had 3 DNS entries in my client's network settings - one was the server and the other 2 were from my ISP. Removing the ISP's DNS entries and keeping the server DNS IP solved my kerberos issue. Wow!
I'd never thought that it won't work with more than the server given as DNS entries. I'll need to check this with my iPhone later, because I had a similar issue with that device yesterday when trying to connect via VPN.
Thanks very much!
Still one question:
The sidebar of my clients still don't show the server's FQDN - but only its bonjour name. Is this right? I read in another forum that the client's sidebar should show the FQDN if everything is configured right.

Apple TV (1G) doesn't appear in devices list when connected via ethernet

After upgrading to OS X Lion and iTunes 10.4 my Apple TV (1G) doesn't appear in the devices list when connected via ethernet. When I switch to wireless lan the device is shown and the sync process starts but can't copy the new films. The copy operation stops every time and sometines the device disappears from the list.
Despite of the upgrading of OS X and iTunes all the settings are unchanged.
Anyone an idea?

Since my last update, I've gathered more information. I'm almost certain this is not entirely a 10.7.1 issue, if an issue in 10.7.1 at all. 10.7.1 may have changed something that caused this issue to appear,but where I was having this problem weekly if not daily, I no longer have the problem. I changed routers. I was using a new D-Link Xtreme N Gigabit RouterDIR-655. This router was causing me pain with lock ups. I replaced it with a Cisco Linksys E4200. I have not had a lockup in over 2 months now and not one sync issue with Apple TV nor my new iPhones, which sync wireless to iTunes on my Mac Pro.
Thinking about how my network is wired leads me to believe the issue was in the router, or maybe a network communication change in 10.7.1 that the DIR-655 was not supporting correctly. My MacPro and a few other hardwired access points in my house go directly to the router. My AppleTV and Airport Extreme are connected to a Gigabit switch and the Gigabit switch is then connected to the router. I also turn off the wireless capabilities in my routers, as I prefer to let my Airport Extreme handle those duties. This all means my normal hardwired communication path from my Mac Pro to Apple TV was going through the router, to the switch, to the Airport Extreme and then to my AppleTV. My Apple TV is connected to the LAN port on the Airport extreme. By going wireless on the MacPro, I was bypassing the router altogether.
As I started out saying, since I replaced my router, my sync issues have also gone away. If your having Apple TV sync issues, you might want to look at the router as well. Also, while I can’t remember the exact settings, I had opened up or enabled UPnP and other router settings in the DIR-655 to see if that would resolve the sync issues and it did not. In the end, I just spent the money and bought a new router and life is good now.

Internet speed slows down when connected via airport express

Internet speed slows down when connecting via airport express. When connecting directly via the timecapsulethe internet speed is ok, when connecting via the airport express the speed slows down.What can I do to change that? Any suggestions?

Turn off the AirPort Express completely as a test, and move your computer very close to the location of the Express.
As I said before, the Express can only extend the bandwidth (speed) that it receives from the Time Capsule, so the speed that you see there with the Express powered off will be the fastest speed of which the Express is capable.
The Express will make the signal go further when it extends....but it will not make the signal go faster.
A good location for a device that extends wirelessly is a point that is about half the distance from the Time Capsule and the general area that needs more wireless coverage.
If you locate the AirPort Express too far from the Time Capsule or there are more than a couple of walls in the signal path, the signal will be very slow by the time that it reaches the Express....and the Express simply extends a signal that has already slowed down significantly.
If you already have the Express located about half the distance between the Time Capsule and general area that needs more wireless coverage, how many walls, ceilings or other obstructions are there in the signal path between the Time Capsule, the AirPort Express and the area that needs more coverage?
Often, due to obstructions, it is just not possible to achieve good performance when you try to extend a network wirelessly. The solution is connect the AirPort Express to the Time Capsule using a wired Ethernet connection.
There is virtually no signal loss with this type of connection, so the Express can be located exactly where it is needed and it will produce a much faster wireless signal in this type of setup.

No alerts when connected with bluetooth

Hello I have a 2013 Hyundai Elantra and a iPhone 5 running iOS 7. When my phone is connected via Bluetooth and I'm listening to fm or xm radio my phone automatically places my text and email notifications to vibrate

Hi WetFishStick,
If you are having an issue with getting no sound through your iPhone's speaker, I would suggest that you troubleshoot using the steps in this article -
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

T420 - external 24" monitor DVI- Displayport : not detected when connected via KVM switch

Hi,
I've been using a 2port USB KVM Switch from InLine for a long time connecting a mac mini and a macbook pro
to a 24" LCD. Recently I had to replace the MacBookPro with a T420. Unfortunately the T420 does not detect the
monitor, when connected via the KVM switch.
I tried:
A) T420 -> Lenovo Displayport to DVI-Adapter -> KVM-Switch -> 24" monitor: NO SUCCESS
B) T420 -> Thinkpad miniDock Series 3 DVI Port-> KVM Seitch -> 24" monitor : NO SUCCESS
C) T420 ->Thinkpad miniDock Series 3 DVI Port-> 24" monitor - > SUCCESS
D) T420 ->Thinkpad miniDock Series 3 VGA Port -> 24" monitor - > SUCCESS
So I have a workaround, but leaving out the KVM switch is not a long term option.
This is all on Win 7 professional / 64bit
Using config (A) I then installed the Intel HD Graphics Driver version 8.15.10.2342 16 May 2011
SURPRISE: during driver install, the monitor WAS detected!!!
SECOND SURPRISE: after reboot I was back in the old situation where the monitor was NOT DETECTED
CONCLUSION:
Seems like a software issue with the Intel HD Graphice driver.
ANY HINT/COMMENT/HELP highly appreciated!
Thanks,
Michael

hey mgold,
as the T420 works correctly with the external monitor and with the miniDock ; it is sad to say the the KVM switch is non-compatible.
I would recommend that you get in contact with the manufacturer of the KVM. At the same time, try uninstalling the current video drivers of your T420 and see if it makes any difference with the KVM if the T420 is running on a generic driver
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

OS X Lion gets kernel panic when connecting via CIFS

A customer of ours has problems with OS X Lion clients that get kernel panic when connecting via CIFS (Novell OES server).
Any new on this issue?
Tycho Sjgren
Apoio AB

Originally Posted by tychosjogren
Sorry for the late response - had to check a few things with the customer.
They use the latest OES version with all the latest sp and patches applied. They have even tested with the an OES 11 beta with the same result. The OS run as a VM on VMware in 64 bit mode attached to a SAN. Has also been tested as a plain install without VMware. The Lion version is 10.7.2.
This is how the problem occurs:
1. Mount the CIFS share - no problems
2. Use the share - no problems
3. If the network connection drops you get a message that the CIFS volume has disappeared and you are asked to unmount it. When you do that you get a kernel panic. You can force the problem to happen by turning of WiFi.
So it is OES2 but which version (SP1, SP2, or SP3)? Interesting as I'd only heard of this with NetWare 6.5.
Do you (and anyone else experiencing this issue in this thread) know if this has recently started happening, perhaps after the latest November 2011 Scheduled Maintenance patches were installed?
I'll hopefully be able to do some testing tomorrow but in the meantime I've asked Novell ...
HTH.

How to change ringtone when connected via bluetooth

Similar Messages

Maybe you are looking for