How to change Speed?
Hi,
I'm using 2960 with GLC-GE-100FX= .
I can not change Speed from Auto to 100MB.
Please advice how to change Speed.
Current I/F setting is as following,
Switch#sh int gi 0/1
GigabitEthernet0/1 is down, line protocol is down (notconnect)
Hardware is Gigabit Ethernet, address is 0025.b42a.d919 (bia 0025.b42a.d919)
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Full-duplex, Auto-speed, link type is auto, media type is 100BaseFX SFP
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Best regards,
Ichiro
Hi Leolaohoo,
Thank you for your prompt reply and exact answer.
I connected Fiber optic cable to SFP. Speed became 100Mb/s from Auto automatically. Thanks!
Best regards,
Ichiro
Similar Messages
-
Podcast how to change speed from 1.5x to 1x speed without having to go through 2x, 3x etc?
Whereas I need to be
able to go from disc 1/track 1 to disc 1/track 2,
instead the iPod goes from disc 1/track 1 to disc
2/track 1.
Right click on any of these files and do a Get Info. Notice that there is, in fact, a Disc number field. So you can make disc numbers 1/10, 2/10 and so on.
iTunes and the iPod are both smart enough to recognize that there are disc numbers there and act correctly. So it'll start with Disc 1, play all that disc, then go to Disc 2, and so forth. It's just a matter of having correct disc number tags.
You can tag disc numbers for a whole disc at once. Simply select all the songs in a single disc (hold SHIFT or CTRL while selecting the songs), right click, Get Info, and you get the mass tag editor screen. Add the disc number info for this disc, and it'll tag that info to all those songs. Repeat for each disc. -
How to Change Speed of One Clip Without Effecting Everything Else
I'm sure there's a way. I'm reworking a music video I shot and edited, which did very well in some local contests here in NYC, considering it was the only unsigned band. Now, after the shameless plug: I want to change the speed of a handful of clips and when I do, of course, all the clips on the timeline move with it. I then have to drag everything back. Any suggestions would be appreciated.
FCP 5.0.3I read about this somewhere. . . let's see if I can remember:
in the T/L, park on the edit, instead of match frame, do a match source file which is optioncommandF. This loads into the viewer, hit command J for speed - set speed, then edit back into T/L. Repeat for your other clips.
Just go back to the bin and check that your source clip hasn't had the speed change saved to it.
Tim
PowerBook G4, dual G5 Mac OS X (10.4.6) -
Question: how to change speed of smooth site scrolling?
Hi there,
where in the code can I reduce the speed of the smooth scrolling for single pages?
Thanks in advance,
bartlYou can use OSX Disk Utility to burn the image file created in DVDSP and choose there the burn speed. Take a look to this link aboutCreating Disc Image in DVDSP (from www.kenstone.net site)
Hope it helps!
Alberto -
Any way to change speed of a clip in "over-write edit" mode?
I want to change the speed of a clip in the timeline without having to lock all the other tracks or having to move the other following clips out of sync. For example I have a clip which lasts for 1 sec, which I want to change to 3 secs. Normally when I do this in the timeline the other clips on the same video tracks which follows, will move their position..... How to change speed in "over-write edit mode"?
I think it's even easier to just match frame the "source file"... put your playhead on the clip you want to speed change in your sequence. Then type optioncmdf. Perform the speed change in the Viewer, then simply cut it in... Might help to put it up above the older, use the double arrow selection tool facing right to move the clips past this change later... pull the upper track speed changed clip down over the old, and viola.
Gotta say though, it's a lot easier to perform the speed change in the Viewer, and edit it all in as you go rather than doing it after you've put the clip in a sequence. (not always possible to determine what the speed change should be maybe, but sure easier.... FCP 7 handles this problem a lot better for sure, and worth the upgrade price if your machine is compatible.
Jerry -
Changing SPEED to entire timeline
I know how to change speed on an individual clip but how can I do it to all of my clips on my timeline? thanks in advance
Select the clip with the speed change. Copy it. Select the other clips and use paste attributes.
-
How to change the speed of a slideshow
How to change the speed of a slideshow
In my test, all I need do was right click the clip and make sure Frame Blend was not checked.
-
When I use Photoshop CS 6 to edit video, I don't know how to change video speed after I converted the clip to smart object? The clip color turns purple and it only allows me to add motion but not change the clip duration and speed anymore.
Thanks for the reply and as a work around method I used the Photoshop to do all the adjustments then export the video to iMovie to finish the final cut. I also have a problem to paint or clone on a blank video layer created in Photoshop. It tells me the time is beyond the target frame time, I don't understand the message. Can you explain to me what did I do wrong? Thanks a lot!
John Wang
801-3618742
[email protected]
http://johnwanggallery.shutterfly.com -
Satellite A500-138 - How to change the fan speed?
Hi,
I have a question how to I can change speed fan on my A500?
I mean with BIOS change power, I dont have advanced option on my BIOS so I cant change that... Any ideas?Hi buddy,
You can change the speed fan in Windows Power Management. Therefore Toshiba Value Added Package must be installed but its already installed if you use the preinstalled Windows from Toshiba.
Open the Power Options: Start => Control Panel => Mobile PC => Power Options
Click on Change plan settings and in advanced settings you should see the option Cooling Method. There you can change between 2 different modes.
Check this!!! -
How to change a motion tween speed
on a timeline of 6 second I need to scale a jpg from 100% to 300% is it posible to slow it down or not? If yes how without changing the time frame or the size...
Thanks in advance
Pascale
P.S. if my question is not clear enough just mention it I will attach an exampleDo you mean easing? If so option the Motion Editor Panel and adjust easing in there. Otherwise slowing it down literally will require adding more frames or reducing the document frame rate (slowing down everything else and/or making it choppy).
Motion Editor ex (don't forget the ease value at bottom): -
How to change CUE ip address?
Hi,
We moved to a new location and using comcast as ISP. I was setting up the phone system today and met a few problems.
1. First of all, all the phones are connected and working(total of 4), but I can only see 3 of them showing up in the CCA. Whats happening here?
2. I wanted to change the user name which appears on the phone using the CCA, CCA told me that the settings were successfully sent to UC520, I restarted the phone and uc520, but the names on the phones remain unchanged?
3. I forgot the password of the voicemail for one of the phone, and wanted to changed in the CUE. so I went to 10.1.10.1,but some comcast login page showed up instead of CUE. so I want to know how to change the IP address of CUE? I don`t know the CLI commands so please teach me if it can only be done with CLI. I have only used CCA in the past. Could this be the reason why for problem 1 and 2? I`m feeling wierd because all the phones can be used to call in/out.
my data vlan is 192.168.0.0 and voice vlan is 192.168.2.0 let me know if you need any other info.
need help urgently as I want to resolve this problem asap.
Thanks in advance.
Building configuration...
Current configuration : 31483 bytes
! Last configuration change at 19:39:02 EST Mon Jan 27 2014 by admin
version 15.1
parser config cache interface
no service pad
no service timestamps debug uptime
service timestamps log datetime msec
service password-encryption
service internal
service compress-config
service sequence-numbers
hostname UC_520
boot-start-marker
boot-end-marker
no logging buffered
no logging rate-limit
enable secret 4 X4ZqtPJ///KxuEWxHSsJrv3beQVnz2ise/xj8fF6eFU
aaa new-model
aaa authentication login default local
aaa session-id common
clock timezone EST -5 0
clock summer-time EDT recurring
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-3885458945
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3885458945
revocation-check none
rsakeypair TP-self-signed-3885458945
crypto pki certificate chain TP-self-signed-3885458945
certificate self-signed 01
3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 33383835 34353839 3435301E 170D3133 30383136 32303534
32305A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 38383534
35383934 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100E470 89FBE9D2 67ED2223 338A6991 0CF59918 BDEF6020 545DFCAF 93A17C39
BEE49E0E 4EDEE26B CCE65E3E 44443BFC E1CE6B5E FE8906DA 3290C015 450721F3
8FB997D1 74A9EAD1 2FB11EAF 7E346F69 4AF873DE A93DCCC0 0607406E 09C0D5D4
47552B50 34398AF9 A5F9CC57 1A2CBCE8 D8DCE2E9 6702F3DD 77505122 2284BDC8
96730203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603
551D2304 18301680 14F3FB0C E861F89C 588B7B22 97DCB6B8 95F52EAF 3F301D06
03551D0E 04160414 F3FB0CE8 61F89C58 8B7B2297 DCB6B895 F52EAF3F 300D0609
2A864886 F70D0101 05050003 81810067 7B14BD34 CF6FE9A5 C2B125A9 347023AD
58DAB6CB E64FA260 41DA2B0B 1921A21D BAED2A0F 47172233 A589F64D 74D70BB5
2790DE19 B905BCFF 18DB2EE5 F397C92D 7522DEB0 B4968E27 0F2CCF98 DCCE40C5
4BF1736A 1C945AFA E0EF7A33 E529F94C CC99549A 051CA1BD E33495DB 0B79451C
5666954E 10E691DF 5D5CCC50 CB72D2
quit
dot11 syslog
dot11 ssid cisco-data
vlan 1
authentication open
dot11 ssid cisco-voice
vlan 100
authentication open
ip source-route
ip cef
ip dhcp relay information trust-all
ip dhcp excluded-address 192.168.0.1 192.168.0.99
ip dhcp excluded-address 192.168.0.151 192.168.0.255
ip dhcp excluded-address 192.168.2.1 192.168.2.9
ip dhcp excluded-address 192.168.2.241 192.168.2.255
ip dhcp excluded-address 192.168.2.99
ip dhcp pool phone
network 192.168.2.0 255.255.255.0
default-router 192.168.2.99
option 150 ip 192.168.2.99
ip name-server 205.152.111.23
ip name-server 205.152.144.23
ip inspect WAAS flush-timeout 10
ip inspect name SDM_LOW dns
ip inspect name SDM_LOW ftp
ip inspect name SDM_LOW h323
ip inspect name SDM_LOW https
ip inspect name SDM_LOW icmp
ip inspect name SDM_LOW imap
ip inspect name SDM_LOW pop3
ip inspect name SDM_LOW netshow
ip inspect name SDM_LOW rcmd
ip inspect name SDM_LOW realaudio
ip inspect name SDM_LOW rtsp
ip inspect name SDM_LOW esmtp
ip inspect name SDM_LOW sqlnet
ip inspect name SDM_LOW streamworks
ip inspect name SDM_LOW tftp
ip inspect name SDM_LOW tcp router-traffic
ip inspect name SDM_LOW udp router-traffic
ip inspect name SDM_LOW vdolive
no ipv6 cef
multilink bundle-name authenticated
stcapp ccm-group 1
stcapp
trunk group ALL_FXO
max-retry 5
voice-class cause-code 1
hunt-scheme longest-idle
voice call send-alert
voice rtp send-recv
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
sip
no update-callerid
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
voice class cause-code 1
no-circuit
voice register global
mode cme
source-address 192.168.2.99 port 5060
max-dn 88
max-pool 22
load 9971 sip9971.9-2-2
load 9951 sip9951.9-2-2
load 8961 sip8961.9-2-2
timezone 12
create profile sync 0423457390373118
voice hunt-group 1 parallel
final 201
list 201,223,227,239,301
timeout 16
pilot 511
voice translation-rule 1000
rule 1 /.*/ //
voice translation-rule 1112
rule 1 /^9/ //
voice translation-rule 2001
voice translation-rule 2002
rule 1 /^6/ //
voice translation-rule 2222
rule 1 /^91900......./ //
rule 2 /^91976......./ //
voice translation-profile CALLER_ID_TRANSLATION_PROFILE
translate calling 1111
voice translation-profile CallBlocking
translate called 2222
voice translation-profile OUTGOING_TRANSLATION_PROFILE
translate called 1112
voice translation-profile XFER_TO_VM_PROFILE
translate redirect-called 2002
voice translation-profile nondialable
translate called 1000
voice-card 0
fax interface-type fax-mail
license udi pid UC520W-16U-4FXO-K9 sn FTX1251Y0DC
archive
log config
logging enable
logging size 600
hidekeys
username admin privilege 15 secret 4 X4ZqtPJ///KxuEWxHSsJrv3beQVnz2ise/xj8fF6eFU
ip tftp source-interface Loopback0
class-map match-all _class_Voice0
match ip dscp ef
class-map match-all _class_Voice1
match ip dscp cs3
policy-map Voice
class _class_Voice0
set cos 6
class _class_Voice1
set cos 3
bridge irb
interface Loopback0
description $FW_INSIDE$
ip address 10.1.10.2 255.255.255.252
ip access-group 101 in
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/0
description $ETH-WAN$
no ip address
ip virtual-reassembly in
load-interval 30
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
interface Integrated-Service-Engine0/0
description cue is initialized with default IMAP group
ip unnumbered Loopback0
ip nat inside
ip virtual-reassembly in
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface FastEthernet0/1/0
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/1
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/2
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/3
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/4
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/5
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/6
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/7
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/8
switchport mode trunk
switchport voice vlan 100
no ip address
macro description cisco-switch
interface Dot11Radio0/5/0
no ip address
ssid cisco-data
ssid cisco-voice
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
antenna receive right
antenna transmit right
service-policy output Voice
interface Dot11Radio0/5/0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0/5/0.100
encapsulation dot1Q 100
bridge-group 100
bridge-group 100 subscriber-loop-control
bridge-group 100 spanning-disabled
bridge-group 100 block-unknown-source
no bridge-group 100 source-learning
no bridge-group 100 unicast-flooding
interface Vlan1
no ip address
bridge-group 1
bridge-group 1 spanning-disabled
interface Vlan100
no ip address
bridge-group 100
bridge-group 100 spanning-disabled
interface Dialer0
description $FW_OUTSIDE$
ip address negotiated
ip access-group 109 in
ip mtu 1452
ip nat outside
ip inspect SDM_LOW out
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname [email protected]
ppp chap password 7 121D001B1E535E56
ppp pap sent-username [email protected] password 7 121D001B1E535E56
ppp ipcp dns request
interface BVI1
ip address 192.168.0.55 255.255.255.0
ip access-group 104 in
ip access-group 108 out
ip helper-address 192.168.0.99
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1412
interface BVI100
description $FW_INSIDE$
ip address 192.168.2.99 255.255.255.0
ip access-group 102 in
ip access-group 107 out
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1412
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/gui
ip dns server
ip nat inside source list 1 interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 192.168.0.99
ip route 10.1.10.1 255.255.255.255 Integrated-Service-Engine0/0
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 10.1.1.0 0.0.0.255
access-list 1 permit 192.168.0.0 0.0.0.255
access-list 1 permit 10.1.10.0 0.0.0.3
access-list 100 remark auto generated by SDM firewall configuration
access-list 100 remark SDM_ACL Category=1
access-list 100 permit ip 192.168.10.0 0.0.0.255 any
access-list 100 deny ip host 255.255.255.255 any
access-list 100 deny ip 127.0.0.0 0.255.255.255 any
access-list 100 permit ip any any
access-list 101 remark auto generated by SDM firewall configuration##NO_ACES_6##
access-list 101 remark SDM_ACL Category=1
access-list 101 permit tcp 192.168.2.0 0.0.0.255 eq 2000 any
access-list 101 permit udp 192.168.2.0 0.0.0.255 eq 2000 any
access-list 101 permit ip 192.168.2.0 0.0.0.255 any
access-list 101 deny ip host 255.255.255.255 any
access-list 101 deny ip 127.0.0.0 0.255.255.255 any
access-list 101 permit ip any any
access-list 102 remark auto generated by SDM firewall configuration##NO_ACES_6##
access-list 102 remark SDM_ACL Category=1
access-list 102 permit tcp 10.1.10.0 0.0.0.3 any eq 2000
access-list 102 permit udp 10.1.10.0 0.0.0.3 any eq 2000
access-list 102 permit ip 10.1.10.0 0.0.0.3 any
access-list 102 deny ip host 255.255.255.255 any
access-list 102 deny ip 127.0.0.0 0.255.255.255 any
access-list 102 permit ip any any
access-list 103 remark SDM_ACL Category=64
access-list 103 permit ip any any
access-list 104 remark SDM_ACL Category=64
access-list 104 permit ip any any
access-list 105 remark SDM_ACL Category=64
access-list 105 permit ip any any
access-list 106 remark SDM_ACL Category=64
access-list 106 permit ip any any
access-list 107 remark SDM_ACL Category=64
access-list 107 permit ip any any
access-list 108 remark SDM_ACL Category=64
access-list 108 permit ip any any
access-list 109 remark auto generated by SDM firewall configuration##NO_ACES_14##
access-list 109 remark SDM_ACL Category=1
access-list 109 permit ip 10.1.10.0 0.0.0.3 any
access-list 109 permit ip 192.168.2.0 0.0.0.255 any
access-list 109 permit udp host 205.152.111.23 eq domain any
access-list 109 permit udp host 205.152.144.23 eq domain any
access-list 109 permit icmp any any echo-reply
access-list 109 permit icmp any any time-exceeded
access-list 109 permit icmp any any unreachable
access-list 109 permit ip 10.0.0.0 0.255.255.255 any
access-list 109 deny ip 172.16.0.0 0.15.255.255 any
access-list 109 permit ip 192.168.0.0 0.0.255.255 any
access-list 109 deny ip 127.0.0.0 0.255.255.255 any
access-list 109 deny ip host 255.255.255.255 any
access-list 109 permit ip host 0.0.0.0 any
access-list 109 permit ip any any
dialer-list 1 protocol ip permit
snmp-server community public RO
tftp-server flash:/phones/521_524/cp524g-8-1-17.bin alias cp524g-8-1-17.bin
tftp-server flash:/phones/7916/B016-1-0-4.SBN alias B016-1-0-4.SBN
tftp-server flash:/phones/7937/apps37sccp.1-4-4-0.bin alias apps37sccp.1-4-4-0.bin
tftp-server flash:/phones/7940_7960/P00308010200.bin alias P00308010200.bin
tftp-server flash:/phones/7940_7960/P00308010200.loads alias P00308010200.loads
tftp-server flash:/phones/7940_7960/P00308010200.sb2 alias P00308010200.sb2
tftp-server flash:/phones/7940_7960/P00308010200.sbn alias P00308010200.sbn
tftp-server flash:/phones/7941_7961/apps41.9-1-1TH1-16.sbn alias apps41.9-1-1TH1-16.sbn
tftp-server flash:/phones/7941_7961/cnu41.9-1-1TH1-16.sbn alias cnu41.9-1-1TH1-16.sbn
tftp-server flash:/phones/7941_7961/cvm41sccp.9-1-1TH1-16.sbn alias cvm41sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7941_7961/dsp41.9-1-1TH1-16.sbn alias dsp41.9-1-1TH1-16.sbn
tftp-server flash:/phones/7941_7961/jar41sccp.9-1-1TH1-16.sbn alias jar41sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7941_7961/SCCP41.9-1-1SR1S.loads alias SCCP41.9-1-1SR1S.loads
tftp-server flash:/phones/7941_7961/term41.default.loads alias term41.default.loads
tftp-server flash:/phones/7941_7961/term61.default.loads alias term61.default.loads
tftp-server flash:/phones/7942_7962/apps42.9-1-1TH1-16.sbn alias apps42.9-1-1TH1-16.sbn
tftp-server flash:/phones/7942_7962/cnu42.9-1-1TH1-16.sbn alias cnu42.9-1-1TH1-16.sbn
tftp-server flash:/phones/7942_7962/cvm42sccp.9-1-1TH1-16.sbn alias cvm42sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7942_7962/dsp42.9-1-1TH1-16.sbn alias dsp42.9-1-1TH1-16.sbn
tftp-server flash:/phones/7942_7962/jar42sccp.9-1-1TH1-16.sbn alias jar42sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7942_7962/SCCP42.9-1-1SR1S.loads alias SCCP42.9-1-1SR1S.loads
tftp-server flash:/phones/7942_7962/term42.default.loads alias term42.default.loads
tftp-server flash:/phones/7942_7962/term62.default.loads alias term62.default.loads
tftp-server flash:/phones/7945_7965/apps45.9-1-1TH1-16.sbn alias apps45.9-1-1TH1-16.sbn
tftp-server flash:/phones/7945_7965/cnu45.9-1-1TH1-16.sbn alias cnu45.9-1-1TH1-16.sbn
tftp-server flash:/phones/7945_7965/cvm45sccp.9-1-1TH1-16.sbn alias cvm45sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7945_7965/dsp45.9-1-1TH1-16.sbn alias dsp45.9-1-1TH1-16.sbn
tftp-server flash:/phones/7945_7965/jar45sccp.9-1-1TH1-16.sbn alias jar45sccp.9-1-1TH1-16.sbn
tftp-server flash:/phones/7945_7965/SCCP45.9-1-1SR1S.loads alias SCCP45.9-1-1SR1S.loads
tftp-server flash:/phones/7945_7965/term45.default.loads alias term45.default.loads
tftp-server flash:/phones/7945_7965/term65.default.loads alias term65.default.loads
tftp-server flash:/ringtones/Analog1.raw alias Analog1.raw
tftp-server flash:/ringtones/Analog2.raw alias Analog2.raw
tftp-server flash:/ringtones/AreYouThere.raw alias AreYouThere.raw
tftp-server flash:/ringtones/DistinctiveRingList.xml alias DistinctiveRingList.xml
tftp-server flash:/ringtones/RingList.xml alias RingList.xml
tftp-server flash:/ringtones/AreYouThereF.raw alias AreYouThereF.raw
tftp-server flash:/ringtones/Bass.raw alias Bass.raw
tftp-server flash:/ringtones/CallBack.raw alias CallBack.raw
tftp-server flash:/ringtones/Chime.raw alias Chime.raw
tftp-server flash:/ringtones/Classic1.raw alias Classic1.raw
tftp-server flash:/ringtones/Classic2.raw alias Classic2.raw
tftp-server flash:/ringtones/ClockShop.raw alias ClockShop.raw
tftp-server flash:/ringtones/Drums1.raw alias Drums1.raw
tftp-server flash:/ringtones/Drums2.raw alias Drums2.raw
tftp-server flash:/ringtones/FilmScore.raw alias FilmScore.raw
tftp-server flash:/ringtones/HarpSynth.raw alias HarpSynth.raw
tftp-server flash:/ringtones/Jamaica.raw alias Jamaica.raw
tftp-server flash:/ringtones/KotoEffect.raw alias KotoEffect.raw
tftp-server flash:/ringtones/MusicBox.raw alias MusicBox.raw
tftp-server flash:/ringtones/Piano1.raw alias Piano1.raw
tftp-server flash:/ringtones/Piano2.raw alias Piano2.raw
tftp-server flash:/ringtones/Pop.raw alias Pop.raw
tftp-server flash:/ringtones/Pulse1.raw alias Pulse1.raw
tftp-server flash:/ringtones/Ring1.raw alias Ring1.raw
tftp-server flash:/ringtones/Ring2.raw alias Ring2.raw
tftp-server flash:/ringtones/Ring3.raw alias Ring3.raw
tftp-server flash:/ringtones/Ring4.raw alias Ring4.raw
tftp-server flash:/ringtones/Ring5.raw alias Ring5.raw
tftp-server flash:/ringtones/Ring6.raw alias Ring6.raw
tftp-server flash:/ringtones/Ring7.raw alias Ring7.raw
tftp-server flash:/ringtones/Sax1.raw alias Sax1.raw
tftp-server flash:/ringtones/Sax2.raw alias Sax2.raw
tftp-server flash:/ringtones/Vibe.raw alias Vibe.raw
tftp-server flash:/Desktops/CampusNight.png
tftp-server flash:/Desktops/TN-CampusNight.png
tftp-server flash:/Desktops/CiscoFountain.png
tftp-server flash:/Desktops/TN-CiscoFountain.png
tftp-server flash:/Desktops/CiscoLogo.png
tftp-server flash:/Desktops/TN-CiscoLogo.png
tftp-server flash:/Desktops/Fountain.png
tftp-server flash:/Desktops/TN-Fountain.png
tftp-server flash:/Desktops/MorroRock.png
tftp-server flash:/Desktops/TN-MorroRock.png
tftp-server flash:/Desktops/NantucketFlowers.png
tftp-server flash:/Desktops/TN-NantucketFlowers.png
tftp-server flash:Desktops/320x212x16/List.xml
tftp-server flash:Desktops/320x212x12/List.xml
tftp-server flash:Desktops/320x216x16/List.xml
tftp-server flash:/bacdprompts/en_bacd_allagentsbusy.au alias en_bacd_allagentsbusy.au
tftp-server flash:/bacdprompts/en_bacd_disconnect.au alias en_bacd_disconnect.au
tftp-server flash:/bacdprompts/en_bacd_enter_dest.au alias en_bacd_enter_dest.au
tftp-server flash:/bacdprompts/en_bacd_invalidoption.au alias en_bacd_invalidoption.au
tftp-server flash:/bacdprompts/en_bacd_music_on_hold.au alias en_bacd_music_on_hold.au
tftp-server flash:/bacdprompts/en_bacd_options_menu.au alias en_bacd_options_menu.au
tftp-server flash:/bacdprompts/en_bacd_welcome.au alias en_bacd_welcome.au
tftp-server flash:/bacdprompts/en_bacd_xferto_operator.au alias en_bacd_xferto_operator.au
radius-server attribute 31 send nas-port-detail
control-plane
bridge 1 route ip
bridge 100 route ip
voice-port 0/0/0
shutdown
caller-id enable
voice-port 0/0/1
shutdown
caller-id enable
voice-port 0/0/2
shutdown
caller-id enable
voice-port 0/0/3
shutdown
caller-id enable
voice-port 0/1/0
trunk-group ALL_FXO 64
connection plar 201
shutdown
caller-id enable
voice-port 0/1/1
trunk-group ALL_FXO 64
connection plar opx 511
description Configured by CCA 4 FXO-0/1/1-Custom-BG
caller-id enable
voice-port 0/1/2
trunk-group ALL_FXO 64
connection plar opx 511
description Configured by CCA 4 FXO-0/1/2-Custom-BG
caller-id enable
voice-port 0/1/3
trunk-group ALL_FXO 64
connection plar 204
shutdown
caller-id enable
voice-port 0/4/0
auto-cut-through
signal immediate
input gain auto-control -15
description Music On Hold Port
sccp local Loopback0
sccp ccm 192.168.2.99 identifier 1 version 3.1
sccp
sccp ccm group 1
associate ccm 1 priority 1
dial-peer cor custom
name internal
name local
name local-plus
name international
name national
name national-plus
name emergency
name toll-free
dial-peer cor list call-internal
member internal
dial-peer cor list call-local
member local
dial-peer cor list call-local-plus
member local-plus
dial-peer cor list call-national
member national
dial-peer cor list call-national-plus
member national-plus
dial-peer cor list call-international
member international
dial-peer cor list call-emergency
member emergency
dial-peer cor list call-toll-free
member toll-free
dial-peer cor list user-internal
member internal
member emergency
dial-peer cor list user-local
member internal
member local
member emergency
member toll-free
dial-peer cor list user-local-plus
member internal
member local
member local-plus
member emergency
member toll-free
dial-peer cor list user-national
member internal
member local
member local-plus
member national
member emergency
member toll-free
dial-peer cor list user-national-plus
member internal
member local
member local-plus
member national
member national-plus
member emergency
member toll-free
dial-peer cor list user-international
member internal
member local
member local-plus
member international
member national
member national-plus
member emergency
member toll-free
dial-peer voice 1 pots
port 0/0/0
no sip-register
dial-peer voice 2 pots
port 0/0/1
no sip-register
dial-peer voice 3 pots
port 0/0/2
no sip-register
dial-peer voice 4 pots
port 0/0/3
no sip-register
dial-peer voice 5 pots
description ** MOH Port **
destination-pattern ABC
port 0/4/0
no sip-register
dial-peer voice 6 pots
description 鬰atch all dial peer for BRI/PRI�
translation-profile incoming nondialable
incoming called-number .%
direct-inward-dial
dial-peer voice 50 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
port 0/1/0
dial-peer voice 51 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
port 0/1/1
dial-peer voice 52 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
port 0/1/2
dial-peer voice 53 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
port 0/1/3
dial-peer voice 54 pots
description ** FXO pots dial-peer **
destination-pattern A0
port 0/1/0
no sip-register
dial-peer voice 55 pots
description ** FXO pots dial-peer **
destination-pattern A1
port 0/1/1
no sip-register
dial-peer voice 56 pots
description ** FXO pots dial-peer **
destination-pattern A2
port 0/1/2
no sip-register
dial-peer voice 57 pots
description ** FXO pots dial-peer **
destination-pattern A3
port 0/1/3
no sip-register
dial-peer voice 2000 voip
description ** cue voicemail pilot number **
translation-profile outgoing XFER_TO_VM_PROFILE
destination-pattern 396
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 2001 voip
description ** cue auto attendant number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 398
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 2012 voip
description ** cue prompt manager number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 240
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 58 pots
trunkgroup ALL_FXO
corlist outgoing call-emergency
description **CCA*North American-7-Digit*Emergency**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 9911
forward-digits all
no sip-register
dial-peer voice 59 pots
trunkgroup ALL_FXO
corlist outgoing call-emergency
description **CCA*North American-7-Digit*Emergency**
preference 5
destination-pattern 911
forward-digits all
no sip-register
dial-peer voice 60 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*North American-7-Digit*10-Digit Local**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 9[2-9].........
forward-digits all
no sip-register
dial-peer voice 61 pots
trunkgroup ALL_FXO
corlist outgoing call-local
description **CCA*North American-7-Digit*Service Numbers**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 9[2-9]11
forward-digits all
no sip-register
dial-peer voice 62 pots
trunkgroup ALL_FXO
corlist outgoing call-national
description **CCA*North American-7-Digit*Long Distance**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 91[2-9]..[2-9]......
forward-digits all
no sip-register
dial-peer voice 63 pots
trunkgroup ALL_FXO
corlist outgoing call-international
description **CCA*North American-7-Digit*International**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 9011T
forward-digits all
no sip-register
dial-peer voice 64 pots
trunkgroup ALL_FXO
corlist outgoing call-toll-free
description **CCA*North American-7-Digit*Toll-Free**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 91800.......
forward-digits all
no sip-register
dial-peer voice 65 pots
trunkgroup ALL_FXO
corlist outgoing call-toll-free
description **CCA*North American-7-Digit*Toll-Free**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 91888.......
forward-digits all
no sip-register
dial-peer voice 66 pots
trunkgroup ALL_FXO
corlist outgoing call-toll-free
description **CCA*North American-7-Digit*Toll-Free**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 91877.......
forward-digits all
no sip-register
dial-peer voice 67 pots
trunkgroup ALL_FXO
corlist outgoing call-toll-free
description **CCA*North American-7-Digit*Toll-Free**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 91866.......
forward-digits all
no sip-register
dial-peer voice 68 pots
trunkgroup ALL_FXO
corlist outgoing call-toll-free
description **CCA*North American-7-Digit*Toll-Free**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 91855.......
forward-digits all
no sip-register
no dial-peer outbound status-check pots
telephony-service
video
authentication credential admin admin
fxo hook-flash
max-ephones 22
max-dn 88
ip source-address 192.168.2.99 port 2000
max-redirect 20
auto assign 1 to 1 type bri
calling-number initiator
service phone videoCapability 1
service phone ehookenable 1
service phone SPA525-wifi-on yes
service phone SPA525-protocol SPCP
service phone SPA525-auto-detect-sccp yes
service phone SPA525-http-write yes
service phone SPA525-SSID cisco-voice
service phone SPA525-readonly no
service phone SPA525-Encryption-type DISABLE
service dnis overlay
service dnis dir-lookup
service dss
timeouts interdigit 5
system message ZFI Engi & Const
url services http://10.1.10.1/voiceview/common/login.do
url authentication http://10.1.10.2/CCMCIP/authenticate.asp
cnf-file location flash:
cnf-file perphone
load 7916-12 B016-1-0-4
load 7916-24 B016-1-0-4
load 7937 apps37sccp.1-4-4-0
load 7960-7940 P00308010200
load 7941 SCCP41.9-1-1SR1S
load 7941GE SCCP41.9-1-1SR1S
load 7942 SCCP42.9-1-1SR1S
load 7945 SCCP45.9-1-1SR1S
load 7961 SCCP41.9-1-1SR1S
load 7961GE SCCP41.9-1-1SR1S
load 7962 SCCP42.9-1-1SR1S
load 7965 SCCP45.9-1-1SR1S
load 521G-524G cp524g-8-1-17
time-zone 12
keepalive 30 auxiliary 4
voicemail 396
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
hunt-group logout HLog
moh flash:/media/music-on-hold.au
multicast moh 239.10.16.16 port 2000
web admin system name cisco secret 5 $1$AJGT$FDYMK5h1/Tiz2VQKQe2fS.
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern 9.T
transfer-pattern .T
transfer-pattern 6... blind
secondary-dialtone 9
night-service day Sun 00:00 23:59
night-service day Mon 17:00 08:00
night-service day Tue 17:00 08:00
night-service day Wed 17:00 08:00
night-service day Thu 17:00 08:00
night-service day Fri 17:00 08:00
night-service day Sat 00:00 23:59
night-service date Jan 1 00:00 23:59
night-service date Nov 25 00:00 23:59
night-service date Dec 25 00:00 23:59
fac standard
create cnf-files version-stamp Jan 01 2002 00:00:00
ephone-template 15
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use Newcall
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd HLog Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Trnsfer TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-template 16
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use Newcall
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd HLog Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Trnsfer TrnsfVM Confrn Acct Park
ephone-template 17
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use CBarge Newcall
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd HLog Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Trnsfer TrnsfVM Confrn Acct Park
ephone-template 18
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use CBarge Newcall
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd HLog Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Trnsfer TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-dn 9
number BCD no-reg primary
description MoH
moh out-call ABC
ephone-dn 81 octo-line
number 301 no-reg primary
pickup-group 1
name wpb wpb
call-forward busy 396
call-forward noan 396 timeout 20
ephone-dn 82 octo-line
number 227 no-reg primary
pickup-group 1
name Robert Stewart
call-forward busy 396
call-forward noan 396 timeout 20
ephone-dn 83 octo-line
number 239 no-reg primary
pickup-group 1
name Conf Room
call-forward busy 396
call-forward noan 396 timeout 20
ephone-dn 84 octo-line
number 223 no-reg primary
pickup-group 1
label 223
description George Guo
name Caroline Wang
call-forward busy 396
call-forward noan 396 timeout 20
ephone-dn 85 octo-line
ring external
number 201 no-reg primary
pickup-group 1
label 201
description Caroline Wang
name Cari Adamonis
call-forward busy 396
call-forward noan 396 timeout 20
ephone-dn 86
number 6... no-reg primary
description ***CCA XFER TO VM EXTENSION***
call-forward all 396
ephone-dn 87
number A801... no-reg primary
mwi off
ephone-dn 88
number A800... no-reg primary
mwi on
ephone 1
device-security-mode none
mac-address 0015.6276.7240
ephone-template 16
username "mdeng" password 123456
type 7940
button 1:82
ephone 2
device-security-mode none
mac-address 0015.6278.9118
ephone-template 16
username "jespinal" password 123456
type 7940
button 1:83
ephone 3
device-security-mode none
mac-address 0015.6269.5B0C
ephone-template 16
username "wpb" password 123456
mtp
type 7940
button 1:81
ephone 5
device-security-mode none
mac-address 0012.4362.0B1E
ephone-template 16
username "GGuo" password 123456
type 7940
button 1:84
ephone 6
device-security-mode none
mac-address 0015.6286.AE4F
ephone-template 16
username "cwang" password 123456
type 7940
missed-calls all
button 1:85
alias exec cca_voice_mode PBX
alias exec cca_vm_notification schedule from_time=00 to_time=24
banner login ^Cbanner login ^Cisco Configuration Assistant. Version: 3.2 (3). Sat Aug 24 11:52:57 EDT 2013^^C
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0 4
transport preferred none
transport input all
line vty 5 100
transport preferred none
transport input all
ntp master
endhow to change local ip address?Via an operating system command.
It's not the sort of thing an application should be doing at all. IP addresses these days are assigned via DHCP. Why would you want to change it from within an application? It would probably disconnect all sockets for all running applications, invalidate the login, all kinds of bad effects.
What is the actual requirement? -
How to change the title of an object in the build order window?
In Keynote '09 v5.1.1 (1034)... How to change the title of an object in the build order window from the default "dropped image" to a specific title?
I'm running the following:
Model Name: MacBook Pro
Model Identifier: MacBookPro2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP21.00A5.B08
SMC Version (system): 1.14f5Custom names can't be applied to objects in the build list.
They are labeled as either; text, shape, table, chart or the filename of an image -
Why doesn't siri know how to change the time of a reminder? When asked, "Do you want to confirm or cancel your reminder?" Reply, "Can I change the time to a half hour later?" Siri doesn't know how to respond.
Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W -
How to change belts in slv-x510
how to change belts in slv-x510
Try control-clicking on the clip in the timeline and from the drop down menu choose Change Speed.
MtD -
How to change the tempo in ultrabeat
I simply want to know how to change the tempo of a beat to the desired speed... all i can see thus far is under resolution, 1/12, 1/16, etc. But I want to match the tempo with a sample I am using which I have pasted onto an audio track.. and those increments obviously are insufficient in getting me the desired speed...
some assistance would be greatly appreciated.. thanksCheck your metronome settings first. Either click hold, or right (command) click on the record button.
If everything checks out there, go to your mixer. Check the all (single, arrange, all) button. You should now be able to see instrument track #256 Klopfgeist (sp?). Maybe you deleted it? Add it. Also check it's output is set to the correct channel.
Maybe you are looking for
-
Hi, my question is: I want to know if it exist a way that numbers of the purchase order (me21n) created against a purchase contract appear in this. Is able trough customizing? Thanks in advance for your help Enzo.
-
When logging into iCloud in Safari, Calendar doesn't display any events. They are displayed on the iPad, iPhone on even the iCal. What is wrong ?
-
Reduction level in planned orders
Hi, Few part# are having planned orders with reduction level 2 even though there is sufficient time for production. Say for eg: parts are supposed to be delivered on 29/09/2009 it is taking reduction level 2 even though it has an opportunity to star
-
Are methods in the Graphics class Thread Safe
Can methods from the Graphics class (.e.g. drawImage(), drawString(), ect..) be called from any thread? In other words, can two threads that refer to the same Graphics object step on each other methods calls? TIA, DB Edited by: Darth_Bane on Apr 27,
-
I would like to know what the limitations on size is for a LabView 6.1 application. I have seemed to have hit a limit at 11,997 KB. It could be a sub item (such as a maximum number of property nodes, or loops within loops) limit that I have unknowing