How to change standard PCA hierarchy for Controlling Area?
Dear all,
I'd like to change standard PCA hierarchy for Controlling Area. System doesn't allow me to do this with the following message:
=====================================
Standard hierarchy CIS for COAr 0700 already contains profit center(s)
Message no. KM160
Diagnosis
You wish to change the standard hierarchy of a controlling area, however, profit centers have already been assigned to the hierarchy. For this reason, you may not change the standard hierarchy for this controlling area.
=====================================
How can I change it?
I will clarify the business requirements behind this request.
We are currently implementing PCA for a customer. However, technically, PCA was already switched on several years ago and it was used for some not-really-accounting customer functionalities (Z* reports) .
So, currently the PCA hierarchy is total mess. No logical heirarchy, a lot of weird profit centers... Not posibly to use this for segment reporting at all. And I would like to sort this out for this project.
Is it possible to reorganize current standard hierarchy? Remove profit centers and profit center groups out of there? Forbid postings?
Similar Messages
-
How to change the COA in the controlling area master?(tx:ox19)
I have just created a controlling area for a company,and I choose "CoCd->CO area", But I define the COA is INT ,the default COA in IDES.
Now I want to assign it a new COA which I have defined.
How can I make it?
Thanks.
Message was edited by:
sandor wangOk, I have changed the coa in controlling area.
1.obr1
2.okc3
3.okc5
The answers is SAP burtcher.Thank you. -
How to change the Safety Intervals for standard Content datasources
Go to RSA2->give your datasource name ->setting up GEN delta
It shows you whts the safety interval setting.
<b>
How to change the Safety Intervals for standard Content datasources since when I go to RSA2 edit and change options are always greyed out. let me know if there is any other transaction code or table to do this.</b>
Thanks
Soniya KapoorHi Soniya,
1) try RSA6.....also RSA8 for additional info.
2) useful link:
http://help.sap.com/saphelp_nw04/helpdata/en/d0/4cc138944cfa06e10000000a11405a/content.htm
Good luck, BB -
BI 7.0 infospoke - how to change standard destination path on appl. server
Hello,
I have the following problem:
I need to extract large amounts of data from infocubes to flatfiles. I have created an infospoke to do this. However, in this infospoke, the destination path, when I choose application server, is fixed.
In BW 3.x, there is a document "BW 3.1 Open Hub Extraction Enhancement Using Literal Filename and Path.pdf" that describes how to change the destination path for the application server.
This solution does not work for BI 7.0, I get short dumps, probably due to ABAP OO.
I need to extract the data to flat files on the application server, not on my local machine, nor into a table in SAP itself, so I need to change the destination path, because the amount of free storage is limited in the standard destination path.
Has anyone encountered this problem in BI 7.0 and solved it?
best regards
Ting
Edited by: Ting Kung on Jun 30, 2008 9:19 AM
Edited by: Ting Kung on Jun 30, 2008 9:19 AM
Sorry, wrong subforum, will close thisHi Ting.
I never had a simmilar problem but, if you go to your InfoSpoke, right click --> "Change" you can see (and change... ) the following values:
Destination Type: FILE (the one you have choosen)
Application Server: Check Box (I think this is your setting)
Server name: (BW server)
Type of File Name: (Here you can choose Between "File Name" or "Logical File Name")
Appl.Server File N: "MY_FILE.CSV" (for example)
Directory: (The directory you want - take a look at the end of this post )
Separator: (The field separator)
Note : If you are working with Linux or Unix you have to look if the BW system user has the corresponding rigths to write in the FileSystem.
. In the beginning I advice you to use something like this /usr/sap/<SID>/DVEBMGS<XX>/work
Hope it helps.
Regards. -
How to change standard text in(me33k)?
How to change standard text in me33k (under Reference data : Dept/Proj Manager) field. I tried it changing in CMOD - under Goto in Text enhancements in Keywords then Change . I did this change and in table ekko-verkf I can see the change, but in me33k I cannot . Appreciate if anybody can reply back soon and help me solve this issue? points awarded for sure.
If u are talking about the text related to a Contract by (Trx ME33K --> Header --> Texts --> Text Overview).
Then u need to use the FM create_text and then put the import parameters as
Text Name = (contract number)
Language = EN
Text ID = K00 Release order header text put K01 for first item text K02 for second item text so on
Text object = EKKO Purchasing doc. header texts
and then call bapi_transaction_commit
u ll be a ble to find the changes
thnks
kanishak -
How to change colors of LCD/VFD controls from SGC-Tek?
Hi Anybody got idea how to change colors of LCD/VFD controls from SGC-Tek?
I have tried but could not. When I try to make myself a nest cluster of clusters of LEDs, I can change colours but I can't do the same thing with LCD/VFD controls.
Please check at LCD/VFD controls
ClementI suspect this repsonse is somewhat mis-leading, the code has no effect on the control other than setting its state, although the route is somewhat tedious for the mod.
I would imagine that the control is set up so that the pixels didn't move around when they are being used as controls.
There are nested groups and locks on the controls, which might make the ordering in the cluster easier to manage.
The following should work....... ;-) it did for me
Open your own new VI
Open the main LCD VI
Open the Browse VI Hierachy
Drag and drop the LCD VI onto your own diagram
Create a cluster from the LCD VI's connector
Now ungroup the clusters and unlock them (this is tedious) if you create your own then you could be more imaginative in the structure, I leave that for homework.
Then import a new bitmap (gif) into the control
Now update the modified contol back into the master control
........ Told you it could be done, but I am not sure the pain was worth it.
BUT
Try the alternative control..... with colour settings as well, ANY colour and even some size control.
It was here http://members.lycos.co.uk/sgctek/ -
How To Change Root Folder Reference for href - anythingslider links?
How To Change Root Folder reference for href - anythingslider links?
My root folder in Web Apps>Carousel in admin is set at /carousel/ (http://bestinscotland04.businesscatalyst.com/carousel/slide-2 - as an example) but I want it to link to a specific page at the root level (specifically /scottish-menswear/mens-highland-kilt-outfit).
I can't find the controls, css, or html file to enable my picture to link to this product page.
I'm sorry for the amateur question - I've never had formal training and it's always a reverse-engineering situation with me.
Thank you.One way to address this is to use the Virtual Web Host feature.
I've uploaded a simple application note to help guide you through the steps.
An alternative would be to create an html at /Web/ which forwards to /Web/Joomla. Not a great solution, I know.
I'm sure there is a way to change the setting in a linux configuration file, but I don't know which file that is in. Maybe some other linux savy community members could help out with that? -
PURCHASING-How to change the next approver for the Purchase Requistion(PR)-
Hi All,
Could you please let me know how to change the next approver for the Purchase Requistion(PR) from User "X" to "Y", as Y was manager of "X" and 'X' left the organization. how can i acheive this? can you please let me know the process ?
Thanks,Hi,
You have not mentioned the version you are using (11i or R12).. Are you using iProcurement... ? Are you using positional or Employee-Supervisor hierarchy..?
Your question : How to change the next approver for the Purchase Requistion(PR) from User "X" to "Y", as Y was manager of "X" and 'X' left the organization.
Ans: You can achieve this through below workarounds
- Through *"Mass Update of Requisitions" functionality* (Conc. request) you can update the Approver name from User "X" to "Y" for existing PRs.
- Replacing the Supervisor name of the requestor/requisitioner in the HR record (assignment) from User "X" to "Y"..
Hope it helps.
Kind Regards,
S.P DASH -
How to change the Data Foundation for an existing Business Element
My Issue:
I have quite a few reports that use the same Business View. The Business View has an under lying Data Foundation that uses a Dynamic Data Connection (DDC). I no longer want to use this DDC because production users are complaining they do not want to have to select a data source each time (multiple times when the report includes sub reports) they run/refresh their reports.
The Holy Grail:
I would like to change the Data Foundation that my Business Element layer is built upon and use another data foundation with identical tables, linking, and fields. The new data foundation would be using a production connection. This solves my immediate issue and has a great side benefit of providing a convenient way to promote reports from development to stage/test, to production and would not require production users to have to select which environment they want their report to run against.
I am logged in to BVM as administrator:
When I look at the Business Element layer Property Browser, I see a Data Foundation Property but is is disabled (such that it can not be changed).
Is there a way to change the Data Foundation that is used by an existing Business Element layer ?
I'd appreciate any help that someone can offer on this topic. Even if it is not possible and someone can shed some light on why this would not work or would not be a good idea, I'd be interested in learningTechnically No the system will not allow you to change as it is involved with many depreciation areas and change is not permitted for control reason.
You only need to retire the asset, reverse the postings, assign correctly and repost the values. -
How to change standard text in portal
How to change standard text in portal
Pls replyArchana,
Please post it in the relevant forum(Portal Implementation/development)
What text do you want to change.
Thanks
Bala Duvvuri -
How to change "No Password required" for Guest to "Yes"account under Somarsoft Dumpsec
Check Content:
Verify all accounts require passwords.
Run the DUMPSEC utility.
Select "Dump Users as Table" from the "Report" menu.
Select the following fields, and click "Add" for each entry:
UserName
SID
PswdRequired
AcctDisabled
Groups
If any accounts have "No" in the "PswdRequired" column, this is a finding.
Some built-in or application-generated accounts (e.g., Guest, IWAM_, IUSR, etc.) may not have this flag set, even though there are passwords present. It can be set by entering the following on a command line: "Net user <account_name> /passwordreq:yes".Hi Malik,
How to change "No Password required" for Guest to "Yes"account under Somarsoft Dumpsec
Please contact SystemTools Technical support to get more efficient support regarding this matter:
http://www.systemtools.com/support.htm
http://www.systemtools.com/toolboard/
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
How to change the sysadmin password for maintenance wizard if you have forg
How to change the sysadmin password for maintenance wizard if you have forgotten the password and can't log in.
Log into SQL*Plus as the $EOFUSER and do:
update eof_user set password = 'passwd_you_want' where user_id = 0;
commit;
-Vikki
Product and Development Manager for Maintenance Wizard -
How to change the Display Pattern for Decimal Fields dynamically
hi all,
Can any one help me how to change the display pattern for decimal fields dynamically???
Currently I am using z,zzz,zzz,zz9.999 Display pattern for Quantity Field. If the value is blank it is displaying as 0.000 on the Screen. But I don't want this to be printed.
Please help me how to solve this ASAP.
Thanks,
PrabhuHi,
Alternatively you can handle it in the context.
In the context area, click on the quantity. In the bottom, click on the conditions tab, and put a condition
<quan field> NE initial.
So the field will not be printed if there is no value.
Regards,
Vidya Chowdhary A. -
How to change the package name for a msg class
Can anybody tell me how to change the package name for a message class.
and how will it effect in the rerport?
thanks in advance
kp>>and how will it effect in the report?
You wouldn't see any direct effect on the Report.. But if you transport the report to QA & leave the Message class in Dev, it might result in syntax issues & you will not be able to execute the report. Just ensure that both of them get transported to QA & you will be fine.
~Suresh -
How to change RSAPublicKeySpec to Key for encrypt?
I have RSAPublicKeySpec and I want to encrypt message with this key.
How to change RSAPublicKeySpec to Key for encrypt message?I try to do this
try {
kf = KeyFactory.getInstance("RSA");
pk = kf.generatePublic(pubCard);
catch (NoSuchAlgorithmException ex4) { System.out.println("1");
catch (InvalidKeySpecException ex4) { System.out.println("2");
try {
Cipher cipher = Cipher.getInstance("RSA");
try {
cipher.init(Cipher.ENCRYPT_MODE, pk);
catch (InvalidKeyException ex2) { System.out.println("a");
try {
ticket = cipher.doFinal(mes.getBytes());
catch (IllegalStateException ex3) {System.out.println("b");
catch (IllegalBlockSizeException ex3) {System.out.println("c");
catch (BadPaddingException ex3) {System.out.println("e");
catch (NoSuchAlgorithmException ex1) {System.out.println("f");
catch (NoSuchPaddingException ex1) {System.out.println("g");
It cougth exception that "NoSuchAlgorithmException"
What wrong with line
Cipher cipher = Cipher.getInstance("RSA");
please tell me
Maybe you are looking for
-
Can any one explain me about PCR TD03 in time management
Hi All , can u pl expalin me about the PCR TD03, in time management, where if public holiday occurs on sunday move to next day. Thanks in advance Srinivas
-
Issue With Moving Hard Drive Icons on My Desktop
I recently purchased 3 LaCie 1TB D2 quadra hard dives and daisy chained them to my MacBook Pro using the FireWire 800. I use one for the Time Machine, one to store my photos and one for back-up of my photos. This Lacie icon associated with a HD appea
-
Hello, Configuration: Mac Mini - Mavericks - running a FileMaker server 13 on a local network. Purpose: Automated archive a single file (.zip). For this I create an App with Automator (archive a file and copy it in a folder). This app is stand alone.
-
HOW CAN I AVOID THIS ERROR MESAGE WHILE TRYING TO EXPORT AN IPHOTO SLIDESHOW: The operation couldn't be completed. (OSStatus error -61.)
-
My safari has stopped working and cannot get into internet
On my Imac (mountain lion v 10.8.5) will not open my Safari browser any more. And I cannot get into the internet. I was told to do "recovery" but they want a registration which I don't have because I bought the computer used. Any ideas?