How to change the base UoM in the material master?
Hi,
I want to change the base UoM in the material master for a particular material but I can't change irt with MM02 as system says it has open routings for this material.
I have set the deletion flag on the routings but still system shows open routings while changing UoM.
Is there any standard SAP program by which UoM can be changed if open POs, stock etc. are present in the system?
Thanks,
Input
HI
It is possible to change the Base unit of measure in the following cases:
1) If there are no stocks of the material in the syatem
2)If there are no purchase requisitions, purchase orders, or scheduling agreements for the material.
3)If a purchase order or purchase order item is not being created or changed.
Procedure for changing is:
Access the material master record in Change mode.
Overwrite the old base unit of measure with the new one on any departmental data screen.
Save the change.
Thanking you.
Similar Messages
-
How can i find the base UOM?
Hi ,
I have created an rfc function module in our BW system. I have to call this RFC from SAP R/3 . To call this RFC I have to pass MATERIAL NUMBER , Quantity Required and UOM. Every thing is working good.
As per the Spec , "if UOM is not there on requested call , Assume base UOM"
I Didnt understand this point .How can find the base UOM of the quantity required?
Could you please give me the idea?
Thanks,
SureshHi ,
Thanks for your responce.
Do you mean: When I call the RFC function module , if i wont give any UOM,
It will take the base UOM automatically or i should include any logic to pass the base uom.
Please clarify this.
Thanks.
Suresh. -
GR is being done in Kgs while the Base Uom of material is PC how is done.
Hello
I want to raise PO for a material which has been Base uom is PC but the GR is being done in KG's. There is no fixed relation between PC and Kg's.
how can we handle this situation.
Regards
SameerHi Sameer
SAP facilitates multiple UOMs.
In Material master, you shd have these settings:
1) Base UOM = PC
2) In purchasing view : Either maintain order unit = KG and/or maintain variable order unit field with '1' or '2'.
How is the ocnversion handled:
1) Maintain Alternate UOMs in Material master; When you maintain order unit=KG, system will prompt you to enter conversion between KG & PC
2) Maintain order unit as KG and conversion in Info record for the material.
3) Maintain order unit as KG in PO and you can maintain conversion in PO
Best regards
Ramki -
How do I change the base color in the recolor Artwork settings?
How do I change the base color in the recolor Artwork settings? I know this seems like a silly thing but I really need to figure this out and I have read and gone through the manual and the help forum to no avail. Please help.
If I have understood you correctly, you want to exclude a certain color from getting affected. You can click on a color row and it becomes highlighted with a border around it - in your artwork, let's say you want the orange color not to get affected. Right-click on it and choose 'Exclude Colors'. When you do that, you will see that the orange color moves to the bottom of the list and there is no arrow in front of it. Like this:
-
How do I get the URL to "My Photo Stream" (the base one, Not the one I created to share out)?
You can't get a url for my photo stream; only for publically shared streams.
-
How to change datasource name based on the partition in configplan
Hi
Can any one please give me some solutions regarding how to change datasource name based on the partition in
configplan.
can't we do this in configuration plan?If you want to change template based on parameter. you have to use below syntax
v_layout boolean
V_LAYOUT:= FND_SUBMIT.add_layout(template_appl_name => 'SQLAP' -- application short name
,template_code => 'HUBAPAPN' -- template name
,template_language => 'en'
,template_territory => '00'
,output_format => 'PDF');
Above can be used in plsql stored procedure before submitting Concurrent Program (Bi Publisher report) or may be you can try to add this code in Oracle reports after report or before report trigger
Thanks
Kamalakar -
Hi! I'd like to purchase PS and LR, when I processing the payment, I find that my Adobe ID registered under US, However, I living in HK, how to change? can't process the payment being I did not have any ZIP code
Hi Ivanlaiwh,
I have been doing the modification regarding your account.
You should now be able to proceed to a new purchase.
Thanks.
Arnaud. -
How I change my Apple store to the Brazilian store. It is Canadian store now but I want it to be Brazilian.
Settings>iTunes and App Stores>Apple ID
Tap your ID
Tap View Apple ID
Enter your password
Go to country/region in the popup window to change the store -
Ok,
This is my first post to this forum.
I have a Late 2011 i5 Macbook Pro. I used this last year during college but the weight was just unbearable. I have decided this year to upgrade to a Macbook Air. Here is my question.
I am starting uni and will be studying Nursing and so I will not be using any heavy software or progaming etc.
The only thing I will use is Office for Mac and browsing. I normally keep around 15 browser tabs open whilst I research.
I also like to download so I would also like Vuse on my Macbook too. I own an external hardrive and so memory isnt a big deal (unless it makes a difference to the performance of the mac itself, Sorry im not great with this stuff)
Do you guys think the base model of the 11" Macbook Air (1.3ghz, 4GB ram, 128GB SSD) will be enough for my needs or do you think I would need to custom build it (1.7ghz, 8GB ram, 128GB SSD)?
My boyfriend thinks for what im using it for the base model will be fine but I dont want to get it to find that its not enough as my main concern is lag but I also do not want to pay extra for something which isnt going to be fully used (ie my current Macbook Pro).
For those of you who do have the 11' Macbook air, how are you finding it? Also, this will be my main computing device, I am selling my Pro but am thinking of buying the wireless keyboard and trackpad so I can connect to an extenal monitor whilst im at home.
Thank you guys in adavnce for any answers.I too have a 2011 mackbook pro and I also have a mid 2012 mackbook air 128 gb ssd and 4 gb ram , I am probably goint to sell the pro because I just don't use it anymore . If you intend to do heavy multi tasking 8gb ram as suggested by a previous poster might be worth the extra money.
-
Data type of the base attribute or the base value does not match...
...the assigned expression.
Hello all,
I always get the Error
+<ERROR+
TEXT="'DWH.CUB_REGISTRATIONS_AW.REGISTRATIONS': XOQ-02517: Der Datentyp des Basisattributs oder der Basisgröße stimmt nicht mit dem zugeordneten Ausdruck überein.
XOQ-01400: Ungültige Metadatenobjekte"/>
The English message must be something like this:
The data type of the base attribute or the base value does not match the assigned expression.
when I run my mapping. The attribute REGISTRATIONS is NUMERIC (12,2) in the Cube and I map a NUMERIC(12,2) constant in it.
I use a simple OWB-Mapping for loading, but I don't understand why it doesn't function. Other mappings where the attributes are out of a
table I put in a cube are running well.
I tried different things, but nothing fixed my problem. Any idea ?
Thanks a lot for help
MichaelTechnically this is a 'warning' from the server, not an 'error'. This means that the change you made should have been submitted, but you get an warning message on the client. AWM would suppress this warning, but evidently OWB does not. Can you switch to use AWM?
Here is the definition of the warning along with 'cause' and 'action' sections. (Unfortunately these sections are not translated into German for some reason.)
>
02517, 0, "The data type \"%(1)s\" of the base attribute or base measure is different from the mapped expression \"%(2)s\"."
// *Cause: Either the base attribute or base measure with the mapped expression was set to an inconsistent data type, or it was mapped to an expression of a different data type from its fixed data type.
// *Action: When changing a mapped expression for a base attribute or base measure, ensure that the expression has the same data type; otherwise, set the data type of the base attribute or base measure to NULL first. When a base attribute or a base measure has an existing mapped expression, do not set it to a different data type.
>
It is probably safe to ignore this warning, but if you can post the relevant XML for the cube, then will probably be able to spot the problem. I assume that REGISTRATIONS is a measure in the cube CUB_REGISTRATIONS_AW, so this is what you can look for in the XML:
(1) The definition of the base measure along with the datatype. It should be something like this
<Measure>
<BaseMeasure
SQLDataType="NUMBER(12,2)"
ETMeasureColumnName="REGISTRATIONS"
Name="REGISTRATIONS">(2) The mapping info for the measure, which should looks something like this:
<MeasureMap
Name="REGISTRATIONS"
Expression="...">
<Measure Name="REGISTRATIONS"/>
</MeasureMap>I don't know if you can get the XML directly from OWB. If not, then DBMS_CUBE.EXPORT_XML should work (assuming you are in 11.2). You could also attach AWM and save the cube to an XML template. -
Should I raise the base clock or the multiplier?
I have Intel Core i7 875k
I can reach 4.2Ghz by either raising the multipliers or by raising the base clock
I do prefer to just raise the multiplier since the rest of my system doesn't runs under any extra stress
However, today I read:
We also prefer to use the Base Clock rather than the CPU multiplier when overclocking CPUs. Increasing the Base Clock increases the amount of bandwidth between the CPU and the rest of the system, yielding greater performance for the same overall CPU frequency.
Is that true?
and if it's true, is there a big or a small difference?
I am not sure how big of a difference it will make to run a CPU at 4.2Ghz by either using multipliers or base clockI run Prime95 and Adobe Premiere CS5 to test stability
With Adobe Premiere CS5 I can have a good idea of how fast the CPU is
Can you tell me which is the best software to test the CPU speed?
I'd like to see some numbers, then I'll get a better idea of what I'm doing -
I'm a Mac user. I wanna know what is the base directory for the "chrome://" url. I wanna also know where i can find the file "chrome://browser/content/browser.xul" in my computer. Thank you
Use your browser to open this page "chrome://browser/content/browser.xul"
Right click and click "View Page Source" you will find that this xul file should be in Firefox.app/Contents/MacOS/omni.jar -
Need to know the base tables for the QM datasources
Hello SAP Experts,
I want to know the base tables for the below mentioned datasources which stores the transaction data.
1. 2LIS_05_QE1: Inspection Characterstics Results
2. 2LIS_05_QE2: Inspection Characterstics Results (Quan)
3. 2LIS_05_QVUDN: Usage decision for Inspection
Need your inputs.
Thanks,
Lasya.
Edited by: lasya john on Dec 10, 2008 8:28 PMHi Lasya,
You can use help.sap.com for this.
If you do not find this data source there...then
You can go to LBWE t-code in R/3 and then infront of the data source...you have maintenance option.
Click on that ...and go inside it in the display mode.
Here you can see a generic pool of fields on the left side which can be included in the data source........ field present in the data sources in the right side of the pool.
For every field you have a tructure name infront of it like MCXXXX where XXXX is the table name.
So the field is being from that particular table.
Even I would the same thing to reply to your thread.
You can follow the same procedure to find the table for any LO data source.
This is accurate in 99% cases...only in very few cases like purchasing...we get one or two fields from different tables.
Hope it helps.
Thanks
Ajeet -
Hi ,i buy a new lcd screen for my laptop, and when technician turn it on 2 white spots, appears, he say that the base that support the lcd screen its the responsable of white spot its true ?
If you've had it for less than a year, then it's still under warranty. Take it to an Apple store or an authorized service facility. See http://support.apple.com/kb/HT1434
-
What is the concept of view in material master?
Hello sap gurus
Some quetions regarding Material Master
what is the concept of views in material master ?
what is determined by specifying industry sector in material master ?
To sell material which views are material are maintened in Material master?
Regards
AmitHi,
<b>Material master for finished ggods is related with SD, MM & PP departments</b>. If you carefully go through the various screens in MM record you will realize the importance of the respective fields and the department to which they belong.
<b>1.Suppose Base unit of measure</b> in Basic data 1 screen. The production people will keep the stock of the item using this UOM.
<b>2. In Sales:Sales Org.1</b> screen we have sales unit in which we will sell the material.
<b>3. Then we have the plant</b> data in which we enter the delivering plant. Also the taxes are determined from the plant so we have the settings for taxes also - whether this material is fully taxable/50% tax/Tax exempted.
<b>4. Then we have purchasing</b> screen in which the data like the purchasing group, variable units,etc are entered. This will effect the purchasing cycle when we are procuring a material from outside. This is related to MM.
<b>5. The we have MRP</b>, this is related to PP as to how to manufacture the product, the MRP type, the strategy group - whether it is MTO/MTS like that.
<b>5. Sales:Sales Org.2 screen</b> - Here we mainatin the account assignment group which is very important as far as the generation of the accounting document is concerned. This triggers the system where to post the value in which G/L account. Accounting document is generated when we create the invoice in VF01 & save it.
<b>6. Work scheduling</b> - Related with the sceduling of the production as to whether underdelivery or overdelivery is allowed, the storage location
<b>7. Quality</b> - Here you can select for a particular finished item where where it has to be checked for quality during its journey from the raw material stage to the finished goods store as a finished item.
<b>8. Accounting</b> - Related to accounting, product costing, total value of the stock in hand, etc. Also related with FI & PP
So all the screens have data which effects one or more modules for the proper functioning of the system to give the optimum results.
<b>Industry Sector:</b>
Key that specifies the branch of industry to which the material is assigned.
<b>Use</b>
When you create a material master record, the industry sector you specify determines
1. which screens appear and in what order
2. which industry-specific fields appear on the individual screens
<b>Screens for Sales:</b>
Sales:Sales Org.1, Sales:Sales Org.2. But other screens also have data which is related to sales. You cannot just maintain the sales views and save the master. It has to be properly linked with the other modules also for the proper functioning of the system. That is why the system is called as "Enterprise Resource Planning" You have to paln the resources of your company and these resources are related with all the modules.
Reward points if solution helps.
Regards,
Allabaqsh G. Patil
Maybe you are looking for
-
Refresh the object associated with a Row in a Data Control?
I am using EclipseLink & have an issue with multiple updates of the same Row. During an update, a new instance of the entity is returned by the update method. The instance bound to the Row is not updated with this new version and subsequent updates f
-
Sync between iPhone and iPad failed spectacularly
The equipment: iPad Mini Retina iPhone 5S The OS: 8.1.3 (on both) The Objective: So my wife has an iPad and an iPhone. She's been using Podcasts on the iPhone for quite some time, and hasn't had a problem with it for quite a while now - it seems most
-
I got a java excutable file and document from the instrument supplier I want to use it in labview , I want to Know how to do it , step by step Attachments: this is a java file changr the jpg to jar .jpg 101 KB
-
SD Invoice Cancellation without Reversal of FI document
Hi Gurus, I want to cancel SD Invoice (open in FI) but at the same time do not want to reverse the original FI invoice. Instead, I would like to have offsetting entries document posted. Best Regards, UR
-
HP Support Assistant not downloading and installing
Hi, I got a brand new ZBook 15 G2 a few days ago, everything seems to work OK except for the HP software that came with it, which I find both ironic and frustrating. I've tried downloading the updates and installing on two occasions, no luck. Windows