How to change the default font (Noteworthy) in Preview Annotation Note ?

How to change the default font (Noteworthy) in Preview > Annotation > Note ?
Thanks for any help guys. Noteworthy is horrible, in my view. But this does not matter. I simply do not want to use it, and woudl be fine with having helvetica back as the annotation typeface.
Neither is Preview responding to changes I attempt in the type menu, nor did I find an entry when using “defaults read com.apple.Preview” in the Terminal.
Any idea? Cheers.

Sorry if this doesn't apply in Mountain Lion (no way to look at ML right now), but I see this in Preview under Mavericks:
I click the annotation button (circled in red) and draw a box. I can then change the text to any active font using the drop down menu (circled in green).

Similar Messages

  • How to Change the Default Font in Firefox 4 ?

    How to Change the Default Font in Firefox 4 , for this >>
    http://store2.up-00.com/Mar11/AJG18655.png << ?

    Go to properties first: and set before typing anything in as shown here:
    http://screencast.com/t/ZTgzOTM3Y
    Then right click bring up this menu while inside active field and click on item with arrrow:
    http://screencast.com/t/ZTRjMWRkMzk
    Now what ever you typed should reflect the new Font setting.
    we may be as you say. But then again other people act like whats on the other side.
    We do our best. And if we fall short, well we gave it our best shot.
    Okay. In the interests of being completely clear:
    I have already tried this. Several times. This procedure will change the default for any of the fields that I place by hand. It does not change the default for any of the fields placed by the Wizard. I was unable to find a solution to the problem in any of the manuals, books, or on-line forums, which is why I posted here as a last resort. This leads to two conclusions:
    A. Your advice is incorrect
    B. There is a problem with my installation of Acrobat
    I will assume that A is not the correct conclusion. I will therefore try a re-install of my software to see if this clears up the problem. There have been other issues with other Adobe software on my machine that a re-installed has fixed nicely. Luckily, I don't have to do this at all often.

  • Anyone know how to change the default font for the new pages? Apparently it does not even come up when I search the 'Help' section of Pages. The level of incompetence in this new version seems breathtaking

    I cannot find how to change the default font in the new Pages. It does not appear in the Help area when I search for it. I am never sing Helvetica for my standard documents and cannot seem to change it. What am I missing? And why does Pages help not have an easy answer?
    dan

    You open a blank template and change the font to you liking. Remember to also get all the styles changed with new font. Then Save As Template. Now you have a template with the font you like.

  • How to change the default font size in X11?

    I was a PC/linux user and have switched to use Mac lately (MBP Snow leopard 10.6.8).
    Everything's been running perfectly on Mac so far and I really like it, until I have to run some programs on XQuartz/X11 (XQuart 2.7.0).  
    The default font size in the Xterm is too small. And I hate it that I have to change it everytime i open a new terminal (via vt fonts menu, ctrl+right-mouse click).
    Is there a way to change the default font size "permanently" in XQuartz/X11 ??
    This may be a stupid question to ask in the developer forum but i cant really solve it.
    There's only config. file ~/.Xdefaults they have mentioned so far on Google but i really cant find it regarding to the directorty.
    Thank you very much in advance.

    You would be surprised to find out that is not like this, to get your account blocked you really need to do a lot of damage and posts are not removed unless they are illegal, and *always* it needs more than a person to delete something. That's a site managed by the community, not by some people put in place by a company.
    It is always acceptable to link to external resources as long these resources do provide additional usefull information. Clearly the thread on that side contained much more information than the one here. I observed people linking from there to this forum, but it's not so common, and that's not due to the policy, just because here is more chat and less usefull information.... you will not see endless threads of replies on with "yes, I have the same problem" there.
    Shortly, this is "discussions" and is quite different in approach than the SE model, where everythign is aimed towards getting the be answers UP and removing all the nonsense.
    I wish that Apple would invest more in discussion, and going towards making this more practical.

  • How to change the default font size in XQuartz?

    I was a PC/linux user and have switched to use Mac lately (MBP Snow leopard 10.6.8).
    Everything's been running perfectly on Mac so far and I really like it, until I have to run some programs on XQuartz/X11 (XQuart 2.7.0).   
    The default font size in the terminal is too small. And I hate it that I have to change it everytime i open a new terminal (via vt fonts menu, ctrl+right-mouse click).
    Is there a way to change the default font size "permanently" in XQuartz/X11 ??
    This may be a stupid question to ask in the developer forum but i cant really solve it.
    There's only config. file ~/.Xdefault they have mentioned so far on Google but i really cant find it regarding to the directorty.
    Thank you very much in advance.

    You would be surprised to find out that is not like this, to get your account blocked you really need to do a lot of damage and posts are not removed unless they are illegal, and *always* it needs more than a person to delete something. That's a site managed by the community, not by some people put in place by a company.
    It is always acceptable to link to external resources as long these resources do provide additional usefull information. Clearly the thread on that side contained much more information than the one here. I observed people linking from there to this forum, but it's not so common, and that's not due to the policy, just because here is more chat and less usefull information.... you will not see endless threads of replies on with "yes, I have the same problem" there.
    Shortly, this is "discussions" and is quite different in approach than the SE model, where everythign is aimed towards getting the be answers UP and removing all the nonsense.
    I wish that Apple would invest more in discussion, and going towards making this more practical.

  • How to change the default setting for Output Preview

    Good afternoon! I use the Output Preview feature under Advanced > Print Production quite a bit, to preview the rendering in one specific simulation profile (for me, its Web Coated SWOP 2006 Grade 3 Paper).
    Is there any way to set the default to be a specific profile, instead of the one that keeps coming up (Output Intent: CGATS TR 001)?
    It's very time consuming to have to repeatedly select my profile everytime I open a PDF and gauge the file in Output Preview.
    Any help would be greatly appreciated... thanks!
    - Johnny

    All you need to do is set the default CMYK (under Preferences > Color Management) to the profile you use the most. It will then default to that profile in Output Preview, unless it has an Output Intent specified.

  • Changing the default font in Keynote '09

    Can anyone please tell me how to change the default font in Keynote '09 masterslides to the one of my choice? I can't seem to do it by following the suggestions in Help.

    In a given theme, the default fonts are defined in a file whose complete pathname resemble to this one:
    Macintosh HD:Applications:iWork '09:Keynote.app:Contents:Resources:
    Themes:Black_8x6.kth:Contents:Resources:French.lproj:fontsAndText.strings
    Here is the path for the theme named "Black_8x6.kth" in its French version.
    The file contents is:
    "STYLESeries2" = "Series_2";
    "STYLE_None" = "Aucun";
    "STYLESeries5" = "Series_5";
    "STYLESeries3" = "Series_3";
    "FONT_LucidaGrande" = "LucidaGrande";
    "FONT_Helvetica" = "Helvetica";
    "STYLE_Free Form" = "Format libre";
    "STYLESeries1" = "Series_1";
    "FONT_GillSans" = "GillSans";
    "STYLE_Normal" = "Normal";
    "STYLESeries0" = "Series_0";
    "FONT_MarkerFelt-Thin" = "MarkerFelt-Thin";
    "STYLESeries4" = "Series_4";
    If you edit the underlined font names you will change the default fonts accordingly.
    Yvan KOENIG (from FRANCE mardi 5 mai 2009 22:07:28)

  • How to change the default window size display font size on Lync 2013 main window?

    Hi champs,
    Just a simple non-technical question: How to change the default window size display font size on Lync 2013 main window on Windows 7 desktop?
    Thanks,

    Hi,
    Did you mean change the Lync: Change the Default Font and Color of Instant Messages just as Edwin said above?
    If not, as I know, there is no natural way to change it.
    If yes, on the latest version of Lync 2013 client, there is a new option “IM” on Lync client “Options” list. And you need to change the default Font and Color of IM in the interface of “IM”.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • How can I change the default font for the Text Tool in CS5?

    Does anyone know of a SIMPLE way to change the default font in CS 5. I can't believe how difficult Adobe makes this. I have spent numerous time on the internet trying to solve this problem. Any help would be greatly appreciated. Thank you

    Thanks Charles, I'm not sure where preferences are, I wish photoshop would
    look at this, there should be a simple way to set font preferences. Perhaps
    CS 7 will offer a solution. Thanks for your help
    On Thu, Nov 29, 2012 at 3:08 PM, charles badland

  • Oh!  Then what I want to do is change the default font on my email, documents etc.  how do I do that.

    Oh!  Then what I want to do is change the default font on my email, documents etc.  How do I do that?

    Hi stom353,
    If you would like to change the fonts in Mail, you may find the following article helpful (the font options are located under menu bar item Mail => Preferences => Fonts & Colors):
    Mail (Mavericks): Fonts & Colors preferences
    http://support.apple.com/kb/PH14863
    Regards,
    - Brenden

  • How do you change the default font in Illustrator CS5?

    I have upgraded my Illustrator to CS5 and my default font has changed to a strange font. In Photoshop and InDesign, I was told that all you have to do is change the font in the Character menu to the font that you wish to be set as "default" and it will be the font that you always start with.
    NOTE: Does this mean that if I use a different font in a different document, the font will stay that font unless I change it back? Isn't there a way to make a particular font the font that I would always what I start with? All this setup means, is that the "default font" will always be whatever the last font that  was being used was. There has to be a way to make a default font that I will always start with no matter what the last font that was being used was.
    Illustrator gives you no option on font type, unless a file is open. Then, if you change the font and close the file, next time you start a file, it will go back to what is was to begin with. There has to be a way to change the default font for all of these programs to where the font always stays the same unless you change it. Mine is just set to use a weird font that I would probably never use.
    I just never thought it would be that big of a deal to change default settings for the font.

    Okay, I basically made three different documents and I made sure that I had everything chosen in each. I then saved the three to that file and they now appear in the list:
    Settings for all 3:
    72psi, 150psi and 300psi
    Rulers Visable
    Times New Roman
    12pt
    14.4pt
    I then went in and started three new documents. I used the three different New Document Profile's that I made and they all had Rulers, their sizes were correct, but the font stayed Myriad Pro. Did I miss anything? And, Yes, I did change the font and the setting before I saved them in the New Document Profile.
    One other thing, I did create a file in the folder, but it was spelled incorrectly. I then went into the folder, erased it and made a second. Then, I went to open it in IllustratorCS5 and it was still listed. I went to the file and it wasn't there anymore, but it was still listed in the New Document Profile. Is there a way to get it off of the list or is all I have to do is restart Illustrator?

  • How do you change the default font in indesign cs3 on a mac?

    Hi, I have tried closing all indesign docs and then changing the font in the font menu to helvetica (from times), then opening a new document and it still gives me [Times (TT)] when i draw a new text box and write something in it.
    I have tried quitting indesign and reopening it and its still the old default font of [Times (TT)] - which is also not an available font on my machine.
    I have also changed my basic paragraph style to helvetica from times, and it still doesnt change the default font when i open a new document.
    When i open a new document in indesign it comes up with helvetica in the character pallet as the font, its just when i go to draw a text box and write something in it that it writes it in Times.

    Is it possible you have more than one text frame object style, or that you have some default paragraph style set other than [Basic Paragraph]? If you are only editing Basic Paragraph and your default text frame is set to another syle, or you have another paragraph style selected when you begin typing, you might see this behavior.
    If not, try resetting your preferences. Replacing InDesign Preferences

  • How do I change the default font in Comments?

    I'm a professor and I grade papers with the Pages' Comments feature. I would like to change the default font and font size for Comments when doing Tracking so that my comments consistently use the same font and font size no matter what font the student has used in their paper. The only way I can do that now is to change each individual comment. Is there a way to do that globally? Thanks!

    I apologize but I know that this question was asked and answered several times (I wrote the answers).
    So, taking time to search in the existing threads with a request like :
    comment AND font AND default
    built from words extracted from your title returned 15 entries.
    The first one is :
    https://discussions.apple.com/message/15158099
    and it contain what you need.
    Yvan KOENIG (VALLAURIS, France) samedi 15 octobre 2011 22:09:10
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please :
    Search for questions similar to your own
    before submitting them to the community

  • How to change the default save encoding of the dvm files when create dvm???

    When I creating a DVM(domain-value mapping) in Chinese on the ESB control and confirm it, then restarted the SOA service, the DVM that I created in Chinese disappeared from ESB control. All the maps(both English and Chinese ) are in DVM Repository.
    After I updated the encoding from ‘UTF-8’ to ‘GB2312’ in the three files below, and restarted the SOA service, the DVM in Chinese appeared on ESB control.
    But when I adding the second row in Chinese and save it, then restart the SOA service, the DVM in Chinese disappeared from ESB Control once again. Because the encoding in the three files below is updated from ‘GB2312’ to ‘UTF-8’ .
    Files:
    C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm.def.xml
    C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm\Chinese.xml.def.xml
    C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\content\files\dvm\Chinese.xml_1.0
    How to change the default save encoding of the dvm files when create dvm in ESB control ???

    I have the same problem.  When I updated to Mavericks now the bookmarks bar font is huge.  I liked it the way it was before.  I liked the smaller font.  Also wish I could change the color of the sidebar and font/folders too.
    I tried to see in preferences if there was anyway to change it, but I don't see anything there.

  • Change the default font in Pages (version 5.0.1)?

    Overall I really like the changes to the iWork suite but an annoying feature is that all new documents in Pages seem to have the font set to Helvetica 11. Everything I need Pages for requires me to use Times New Roman 12, and I work in Pages all day. Everytime I create a new document, I have to change it from Helvetica 11 to Times New Roman 12. I've looked for how to change the default but I don't see it. Any help here?
    Many thanks in advance,
    Trent

    Create a template set the way you want > Menu > Pages > Preferences > For New Documents > Use Template > Change Template
    Peter

Maybe you are looking for

  • Getting compile time errors during gwt application compilation

    Hi, I am getting below compile errors while running ant script for my GWT application. javac: [javac] Compiling 32 source files to D:\Projects\workspace\MckSurvey\war\WEB-INF\classes [javac] D:\Projects\workspace\MckSurvey\src\com\spinsci\survey\clie

  • PSE 7 catalog error when restoring backup from PSE 5

    I am attempting to move from PSE5 on XP to PSE7 on Vista using the backup-restore method, . Catalog is about 75 MB, data set is 56 GB, all stored on external USB drive. Tried restoring in new folder using both with and without restoring folder arrang

  • To watch online requires Microsoft Silverlight! (L...

    I know us Linux users are often left out in the cold but come on BT, Silverlight! WTF

  • UWL Integration with Webdynpro ABAP

    Hello, I am creating a Webdynpro ABAP Application in which I want to create a screen(form) with various Input fields which will be entered by the user and it will have a Submit button. On the click of the Submit button I want to trigger a Workflow an

  • Warning: EJB  referenced an unknown security role?

    Hello, I get a weird error from WL 5.1 (SP6), using the default WLPropertyRealm. In the EJB I have the following check: if (ctx.isCallerInRole("ConspiratorRole")) System.out.println ("the user is in the ConspiratorRole role"); At run time, I get the