How to change the domain in zee table

hi
how to change the domain in zee table
the domain is activated , i want to change the length.
can anyone help me

Go to SE11.
Give the name of the z-table. Click change.
double click on the data element name and over there again double click on the domain name. So you are in the domain.
There change the length of the domain as per your requirement.

Similar Messages

  • How to change the Domain name of portal

    Hi All,
    We've developed an application using the WDA(Web Dynpro for ABAP) on BI 7.0 and in this we are displaying the BI reports as well. This whole appliaction works fine when we run this on the BI portal 7.0. But when we run it from the Enterprise Portal 6.0
    the reports don't show up and it goes in the never ending loop. After research we found that this is happening because the
    Domain names of the BI portal and the Enterprise Portal are not the same. And as per one of the SAP note the prerequisite for the WDA application to run on the EP portal is to have the same domain name on both the portals.
    Now we are planning to change the domain name on the BI portal.
    Does anyone let me know how and where we need to go and change this Domain name ?
    Thanks in advance for your help.
    Regards,
    Alok Varma

    Hi,
    first step is to configure your DNS server. There has to be a name resolution for portal.domain.tld to your portal server's IP address.
    Right now I don't have access to Visual Administrator, so I cannot check if there is any domain specific configation to be done on the server side.
    As for the SSO between your Portal and WDA: you'll have to recreate the portal server certificates and import it into the ABAP system.
    The Logon Ticket MYSAPSSO2 has to be issued to the new domain by the portal! If not, your browser won't sent this cookie to the BI system and no SSO data will be transmitted to the BI system.
    br,
    Tobias

  • Where/How to change the domain?

    Hello,
    the domain of the application server has changed.
    Where or how do I have to change the entries for the domain the application server is in?
    For example:
    old Domain:
    myreportserver.olddomain.com
    new domain:
    myreportserver.newdomain.de
    So, where and which entries do I have to change?
    Thanks a lot.
    Best regards.
    Florian

    Either, you can...
    Use $ORACLE_HOME/chgip/scripts/chgiphost.sh to change the domain name
    or
    Create a virtual host where the ServerName use the new Server.domain that you wish.
    In this forum you may find info for both ways, look for chgiphost and virtualhost.
    Greetings.

  • How to change the domain name

    Our company was bought in an acquisition and for a long time we kept out domain and firewall. Now, we have to move the servers physically and on the new domain. All Oracle servers have been installed with the service of ORANAME.usdv.sdv.com and the TNS names use the same Service tag. The databases created with dbca also get this service extension on install.
    I did not find a lot to read about a domain change in Oracle. Looking for an idea on what complications I may expect and how to actually perform the domain change, tips and tricks, some materials to read, etc.
    It looks that I have to change the tnsnames.ora on all clients,but is this going to be enough? Do I need to redo netca on clients and servers?
    Thanks a lot, mj

    Thanks a lot. I'm sorry I did not specify that in my initial post - this was actually what I read but could not find anything more on that...
    I have a couple of questions like:
    When do I have to alter the database to change tha name - before or after to join to the new domain?
    Also, is the statement "ALTER DATABASE RENAME GLOBAL_NAME TO <dbname.new.domain>" the only thing I need to do? It looks that this command never changes the v$parameter value. Do I need to change it and how to do that?
    The doc said :"DB_DOMAIN has no effect on the global database name" but it this true?
    Also, is this valid for both 10.2.0.2 and above and 9.2.0.7?
    Thanks a lot,mj
    Message was edited by:
    user494147

  • How to change the colour of a table cell boder?

    I have just changed from Dreamweaver MX t CS5 and cannot find how to add a colour to the borders of a table and table cells.  In the old MX it was easy just selected the colour for border in properties but in CS5 this option is not availble.  Have tried formatting with CSS but this only colurs the outer boarder can anyone help?

    Not sure what you mean by a custom class would it be possible to give me an example?

  • How to change the Domain a Supervisor was put into in ICM 7.2

    I have a Supervisor that was inadvertently put into the wrong Domain in the Agent Explorer.  How can the supervisor's Domain be changed without completly deleting them out of ICM?

    I don't think you can. Just delete the super and add them again.
    Regards,
    Geoff

  • Business Catalyst Help | Learn how to change the domain name

    This question was posted in response to the following article: http://helpx.adobe.com/business-catalyst/using/change-site-domain1.html

    A Muse site seems to be automatically hosted on a web basic site. So when you want to give your site the proper domain name, (which is already purchased and added to the BC servers), and have it hosted on your web + plan (or  another premium web plan with mail), where is the option for that? As far as I can see, this option is not offered. Do you upgrade it from your premium plan? And if so, how?

  • How to change the colums of a table control scrollable?

    Hi Guys,
    I have one table control in my webdynpro component. Datais are filling to the table dynamically . Fields also may vary depending on the requirement.if some 20 or 30 fields are filling into my table in the run time, then i need to scroll the fields. Each field should be scrollable. Using which property of the table i can achieve this.??
    Can u people help me in this.
    Thanks
    Subin

    Hi
    Thanks for ur reply. Actually i am using this table control for search help. the same table control is using for the all search helps. if some 20 fields are there in th search result all the fields it is showing in my table control. eg. one costcentre field is there in my resultin table control. But it s showing only 'costcen' instead of 'costcentre.' It is not showin the resulting costcentre value also fully. for this i need to scroll the particular field alone for seeing the full value. This is my requirement.
    If i am  giving scrllable col count as 1 it is showing only one field. this is not wt i ws expecting.
    Please try to give me a solution.
    Thanks
    Subin

  • Change the DB_LOCATION of a Table in Mapping after Copying it

    Hello!
    Does anybody know how to change the property DB_LOCATION for table in a mapping after copying it to another modul withhin the same project with OMB PLUS.
    After copying the mapping all objects still points to the old objects in the repository. But this objects are now in the wrong module. I have the same repository objects also in the new module and i want to change the mapping operator to point to the objects in the new module.
    In the mapping editor you achieve this by reconciling the mapping object with the new object in the other module. How can i do this with OMB PLUS?
    Thanks in advance
    Alexander
    Edited by: user13336549 on 14.09.2010 07:40

    Hi Alexander
    After copying a table to a different module, edit the module to set the data location, configure the module to define the location and synchronize the mapping to use this table.
    In OMB to synchronize inbound and outbound use OMBSYNCHRONIZE command
    Inbound:
    OMBSYNCHRONIZE TABLE '$OMB_CURRENT_PROJECT/SALES/TABY' TO MAPPING 'M_W_PARAMS' OPERATOR 'TABY' USE (RECONCILE_STRATEGY 'REPLACE', MATCHING_STRATEGY 'MATCH_BY_OBJECT_NAME')
    Outbound:
    OMBSYNCHRONIZE MAPPING 'M_W_PARAMS' OPERATOR 'TABX' TO TABLE '$OMB_CURRENT_PROJECT/SALES/TABX' USE (RECONCILE_STRATEGY 'REPLACE', MATCHING_STRATEGY 'MATCH_BY_OBJECT_NAME')
    Cheers
    David

  • How to change the default text title of Detached table/treetable

    Hi,
    Is anybody know How to change the default text title of Detached table/treetable.
    I have already read the post on "http://vtkrishn.com/2010/07/28/how-to-change-the-default-text-title-of-detached-tabletreetable/"
    as per this post It will change the title throughout the application.
    I wanted to change only for one particular table.
    Thanks,
    Charu
    Edited by: Charu on Sep 13, 2012 4:14 AM

    Hi,
    please don't double post and instead continue with your original threat. In the previous post you got the correct answer to use skinning. You did not like the solution as it doesn't allow per-instance titles. I agree with this and a logical consequence is to file an enhancement request instead of re-posting the question. I'll file the ER, so no need to follow up for you anymore
    Frank

  • How to change the lenth of existing field in sap standard table

    Hi all,
    can anybody help,my requirement is, how to change the length of existing field in sap standard table....
    thanks in advance..

    Which field are you thinking of in particular?  Are you wanting to increase or decrease the length?
    Some fields are used so extensively that a change to their length will mean adjusting many tables, some of them potentially very large, and hence taking a long time to adjust.
    Some standard SAP programs expect certain fields to be of specific lengths and won't work if the length is changed.
    Some screens could cease to work.
    If you decrease length, then you could lose data.
    matt

  • How to change the images dynamically in a table.

    Hai,
                     How to change the images dynamically in a table based on the condition in webdynpro abap.
    Edited by: Ravi.Seela on Oct 13, 2011 2:17 PM

    This has been much discussed earlier. Do search posts.
    For your scenario i would do the following.
    inside your node which is binded to the table, i create a new node image with cardinality 1 ..1 and a attribute called path of type string.
    create a  supply function for the node image .
    Supply method now has a Element (Parent element ) and node.
    Based on your record in element, set the right image source to path attribute and bind the node.
    This will make sure that the framework calls the image supply function for every row in a table.

  • How to change the status in the table kssk

    Hi ,
    In document management system - for a doc type pdf, I am maintaing the class (cl_xxx) in img setting. some charateristics are assigned to that class (with entry required).
    My problem is While  creating the document (cv01n). I am  not assigning the value for that char ( i.e in addition data), eventhough it is mandatory .
    In the table kssk , For that particular document , status is set to 5 . how to change the status .
    note :
    In cv04n - if i search wrt to that charateristic in the classification tab. i am not  able to get the value.
    Please help me to solv the problem.
    Regards,
    Rani.

    hi you can do like this also if it is a test server..and y had the authoridation..
    togo the table -supposekkkk-execute-select a particular record--double click it ---then it will display it in the vertical line..
    then put /h in the tcode listbox and put enter--debugg it and change this    if code = 'SHOW'  as EDIT. execute it and change it and save it..
    regards,
    venkat.

  • How to change the Field Symbol, so Adobe Forms takes it as a Table?

    Hi guys,
    I created an Field Symbol, in a Interface which I use for Adobe Forms. The type of the Field Symbol is STANDARD TABLE, and this field symbol I fill with data from another program.
    But the problem is that in adobe forms, this Field Symbol is taken as TEXT FIELD and not as Table... and this shows me a Dump because it can't convert Internal Table to type C (the dump is like that).
    What I need, is how to change the Field Symbol, so Adobe Forms takes it as a Table?
    I looked at Adobe Form, and found this:
    The Type Category of the Field Symbol is DICTIONARY TYPE and I think I need to change it to Internal Table as shown in the right picture.
    Does someone have any idea?

    Hello Taly,
    To what i understand your requirement, you need to pass data from Field symbol to internal table in Adobe form.
    You have done it correct partially. I have replicated your scenario and steps are below -
    1) Create a Z structure
    2) Create Z Table Type
    3) Create Adobe Interface with Table & Field Symbol. Also do coding as shown to assign the internal table populated in driver program to filed symbol.
    4) Design Form as -
    5) Code driver as -
    *& Report  ZR_AF_FS_1
    REPORT  zr_af_fs_1.
    DATA: fm_name           TYPE rs38l_fnam,
           fp_docparams      TYPE sfpdocparams,
           fp_outputparams   TYPE sfpoutputparams,
           it_kna1           TYPE ztt_fs_1.
    * Sets the output parameters and opens the spool job
    CALL FUNCTION 'FP_JOB_OPEN'                   "& Form Processing: Call Form
       CHANGING
         ie_outputparams = fp_outputparams
       EXCEPTIONS
         cancel          = 1
         usage_error     = 2
         system_error    = 3
         internal_error  = 4
         OTHERS          = 5.
    IF sy-subrc <> 0.
    *            <error handling>
    ENDIF.
    *&---- Get the name of the generated function module
    CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'           "& Form Processing Generation
       EXPORTING
         i_name     = 'ZAF_FS_1'
       IMPORTING
         e_funcname = fm_name.
    IF sy-subrc <> 0.
    *  <error handling>
    ENDIF.
    *-- Fetch the Data and store it in the Internal Table
    SELECT kunnr name1 name2 adrnr FROM kna1 INTO TABLE it_kna1 UP TO 15 ROWS.
    * Language and country setting (here US as an example)
    fp_docparams-langu   = 'E'.
    fp_docparams-country = 'US'.
    *&--- Call the generated function module
    CALL FUNCTION fm_name
       EXPORTING
         /1bcdwb/docparams        = fp_docparams
          it_data                   = it_kna1
    *    IMPORTING
    *     /1BCDWB/FORMOUTPUT       =
       EXCEPTIONS
         usage_error           = 1
         system_error          = 2
         internal_error           = 3.
    IF sy-subrc <> 0.
    *  <error handling>
    ENDIF.
    *&---- Close the spool job
    CALL FUNCTION 'FP_JOB_CLOSE'
    *    IMPORTING
    *     E_RESULT             =
       EXCEPTIONS
         usage_error           = 1
         system_error          = 2
         internal_error        = 3
         OTHERS               = 4.
    IF sy-subrc <> 0.
    *            <error handling>
    ENDIF.
    6) Output -
    BR.

  • How to change the Credential domain Value in XML gateway?

    How to change the Credential domain Value in XML gateway?
    configured the XML Gateway trading partner . It is generating the header as given below. but need to change the Credential domain to DUNS.
    <Header>
    <From>
    <Credential domain="olgridap1.lan">
      <Identity>53369415-cxml</Identity>
    </Credential>
    </From>
    Desired XML header
    <Header>
    <From>
    <Credential domain="DUNS">
      <Identity>53369415-cxml</Identity>
    </Credential>
    </From>

    You might want to check WLP 10.3 & deployment plan & log4j.xml for a similar topic.

Maybe you are looking for

  • Exclamation mark instead of photo!

    I tried to transfer the contents of an album I have created to a Flashdrive... somehow now all the of the photos in that album won't 'open' I just get an exclamation mark when I click on them -- and also some of the photos in 'Photos'... what on eart

  • Hostchecker is not installed properly

    If your Juniper Software is not working on Local Machine While trying to connect to Client Environment. So Just follow following things. Option 1:- Tools Internet Option**  Advanced  Click on 'Reset' Check in box 'Delete Personal Setting'  Clic

  • Apex_mail.send, keep sent messages in sent folder.

    Hey guys, I am trying to send email from APEX using apex_mail.send, it works fine but when I am trying to show up them in the sent folder from gmail site of the "FROM" email that I sent the message from, I can't find them there. Can you guys help in

  • Need to open the excel sheet in the selection screen

    Hi All, my requirement is to upload the data from excel sheet but that excel sheet have mutiple tabs and all individual tab have mutiple records inside. I need to open the excel sheet from selection screen and select dynamically any tab and i need to

  • Need module pool pgm

    hi friends , i need module pool pgm with table control it should allow user to enter data and that data should be stored in ZTABLE.plz don't give demo pgm.if any one has developed give brief idea thaks in advance regards, soorya