How to change the file type from IMOVIE PROJECT to other types of file

how to change the file type from IMOVIE PROJECT to other types of file??
thank you very much for your help=]

I am not sure what you mean, but once you make a project. Then go to the share menu and you can export the project to iDVD, itunes, mobileme, quicktime.
Share export quicktime movie will allow you to export to a variety of codecs. What specific export are you looking to share the movie in? What is the final source that the movie will be displayed?

Similar Messages

  • How to change value of ${eol} from \n to \r\n, writing by File Adapter

    Hi All,
    How to change value of ${eol} from \n to \r\n, while writing file through File Adapter.
    As my file is being created in Linux environment, so for new line separater, \n is used. I mounted this file directory to windows System.
    As Windows requires \r\n for new line seperator. So I need to change value of ${eol} in the Schema created for file writing.
    Can any one provide help regarding this.
    Thanks in advance

    Hi,
    When an XML payload is written to a file \n would be used as the default line separator regardless of if its windows or linux, as per the XML specification http://www.w3.org/TR/REC-xml/#sec-line-ends.
    As such, one need not worry about the line separators because, the XML file would eventually be processed by a parser which usually would be able to understand both line endings (as they are whitespace characters as far as the parser is concerned).
    If you want to convert the line terminators (for readability etc), 10.1.3.4 has a new feature - in the XML schema definition for the file adapter payload, add these two top level directives to the schema element:
    xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
    nxsd:normalizeLineTerminators="false"
    Regards,
    Shanmu.

  • How to change the Unitprice value from 2 decimals to 3 decimals in script

    Hi Gurus,
    how to change the Unitprice value from two decimals to three decimals for each item level for PO in script.
    Please provide some possible solutions.
    Thanks,
    V.V.

    Hi,
    Check the options available like
    &VAR(.2)&  this will print 2 decimals
    &VAR(.3)&  this will print 3 decimals
    need to change the value for how many decimals you need
    Thanks & Regards
    Sarves Sombhatla

  • How to Change the Development Class from $TMP to YABAP in Layout

    Hi all,
    How to Change the Development Class from $TMP to YABAP in Layout( SE71).
    Thanks & Regards,
    N.L.Narayana

    Hi,
    it is possible with SE03. you just click on Change <b>Object Directory Entries</b> under the tree menu <b>Object directory</b>, and then enter in the last column of table control
    Check the check box and enter FORM and formname,
      R3TR FORM SAPscript form 
    then execute it.
    then you will be able to change it to PACKAGE from $TMP
    regards
    vijay

  • How to remove the time slider from my project and keep only buttons

    How to remove the time slider from my project and keep only buttons to interact with my project .

    If I understand you correctly, go to the skin editor (Project, Skin Editor in Captivate 4), select the Playback Control tab, uncheck the Progressbar check box.  Leave checked the buttons for play/pause, rewind, forward, back, etc.
    I hope this helps.
    Mister C.

  • How to change the IDOC Status from 30 to 03

    Hi Friends,
    In the Partner Profiles Collect IDOCS option is Selected and the Output mode is 4.
    In my Custom Program i am Using the Function Module MASTER_IDOC_DISTRIBUTE to generate the IDOCs
    I am getting the IDOCs of Status 30.
    then in my Custom Program, I am Submitting the IDOCs to RSEOUT00 program.
    to change the IDOC status from 30 to 03.
      SUBMIT rseout00 USING SELECTION-SCREEN '1000'
                   WITH docnum  IN  gt_range_idocs
                   WITH p_compl EQ 'Y'
                   AND RETURN.
    but still i am not getting the IDOCs of changed status.
    I need to get the Changed IDOC status and if the IDOC status is not changed then I need to generate an Error file for the IDOCs data and send that data to customers as a mail.
    so my requirment is to call the RSEOUT00 in the Custom Program and Change the IDOCs Status to 03.
      When i am Executing the RSEOUT00 Indidually by giving the IDOCs numbers, then the IDOCs Status is going to change to 03 from 30.
    Kindly Guide me how to proceed furthur
    Thanks in Advance,
    Ganesh

    Thanks Shrishit,
    RC1_IDOC_SET_STATUS changing the Status from 30 to 03.
    Its fine, But my Question is will IDOC Data will be reached to XI Server or not.??
    means is the functionality of this Program is same as the RSEOUT00.
    MY job is to change Status from 30 to 03 only
    and then Check the Status of those IDOCs, and if the IDOC is not sended to XI  i.e.;03 status, then I need to send the Details of IDOC (i.e.; data in filed IDOC) to Customer Mail ID through an Attachement.
    I hope you Understood my AIM, why I need to change the Status in my Custom Program only, by submitting IDOCs to this report .
    Kindly waiting for your reply,
    Thanks in Advance,
    Ganesh

  • How to change the Character Set from AL32UTF8 to WE8DEC

    Hello!!
    I want to know how to change the character set in the database from AL32UTF8 to WE8DEC.
    I tried to use the comand ALTER DATABASE CHARACTER SET but I got an error because WE8DEC is not a superset of AL32UTF8.
    I need to import tables from a server that uses WE8DEC. So when I do the import to my server, wich has AL32UTF8 , I can't import the rows that include an Ñ.
    So I want to change the caracter set to WE8DEC. How can I do it?
    Is it needed to change the language configuration? The remote server has AMERICAN_AMERICA, and my server has MEXICAN SPANISH_MEXICO (both uses text in spanish).
    Thanks a lot!!

    When you export from WE8DEC server what did you use
    for NLS_LANG char set? And when importing?
    The export was done in another computer because I can't do the export in the server (I have 10g, and the remote server has 9i and the export is not working). In my server, when I tried to do the import, the NS_LANG value was MEXICAN SPANISH_MEXICO.WE8MSWIN1252.
    When I try to import to my database I got the error:
    import done in WE8DEC character set and AL16UTF16 NCHAR character set
    import server uses AL32UTF8 character set (possible charset conversion)
    export client uses WE8MSWIN1252 character set (possible charset conversion)
    . importing USRMCR06's objects into PRIMARIZACION
    . . importing table "CHG_FONDOS_MARZO_CD_MOR"
    IMP-00019: row rejected due to ORACLE error 12899
    IMP-00003: ORACLE error 12899 encountered
    ORA-12899: value too large for column "PRIMARIZACION"."CHG_FONDOS_MARZO_CD_MOR".
    "NOMBRE" (actual: 41, maximum: 40)
    Column 1 16623436
    Column 2
    Column 3 Pymes_1
    Column 4

  • Using Oracle 11g How to change the Log mode from NoArchieve to Archieve Log

    Hi,
    I currently using oracle 11g How can I change database from NoArchivelog node to Archivelog node using spfile.
    And where exactly the spfile will be located?
    My instance is EPM11 in my local oracle is present in D folder where can i found the pfile?
    In this path i found 1 pfile in my Local Machine
    "D:/Oracle/Product/11g/admin/epm11/pfile" .I have added the following commands in this pfile
    # Archive Log Destinations -benr(10/15/04)
    log_archive_dest_1='location=/u02/oradata/cuddle/archive'
    log_archive_start=TRUE
    Then i have ran the shutdown command.
    Database instance is showtdown.
    After that i am not able to perform startup.
    So please suggest me how to change the mode using SPfile and tell me the path where spfile and pfile should be located?
    And also do i need to set the "Oracle_Home" path in my environment variables"
    Thanks In Advance,
    Chandana

    user11225122 wrote:
    Hi,
    I currently using oracle 11g How can I change database from NoArchivelog node to Archivelog node using spfile.
    And where exactly the spfile will be located?
    My instance is EPM11 in my local oracle is present in D folder where can i found the pfile?
    In this path i found 1 pfile in my Local Machine
    "D:/Oracle/Product/11g/admin/epm11/pfile" .I have added the following commands in this pfile
    # Archive Log Destinations -benr(10/15/04)
    log_archive_dest_1='location=/u02/oradata/cuddle/archive'
    log_archive_start=TRUE
    Then i have ran the shutdown command.
    Database instance is showtdown.
    After that i am not able to perform startup.
    So please suggest me how to change the mode using SPfile and tell me the path where spfile and pfile should be located?
    And also do i need to set the "Oracle_Home" path in my environment variables"
    Thanks In Advance,
    Chandanaremove log_archive_start=TRUE from pfile (it is depricated from 10g onwards)
    SQL>startup nomount pfile="D:/Oracle/Product/11g/admin/epm11/pfile/initYOUR_SID_NAME.ora"
    SQL>Create spfile from pfile="D:/Oracle/Product/11g/admin/epm11/pfile/initYOUR_SID_NAME.ora"
    SQL>SHUT IMMEDIATE;
    SQL>STARTUP MOUNT
    SQL>ALTER DATABASE ARCHIVELOG;
    SQL>ALTER DATABASE OPEN;
    SQL>ARCHIVE LOG LIST;
    SQL>SHOW PARAMATER SPFILE;
    YOU WILL FIND THE LOCATION OF SPFILE
    SQL>

  • How to change the library path from development machine to application serv

    hi
    how can i change the library path which i developed in windows machine and the library path is c:/fas/dss.pll and now i hosted all forms,menu,library and reports in application server that is running in linux machine now i want to know how to change the library path c:\fas\dss.pll to /oracle/fas/dss.pll.

    Hi !
    It is standard functionality to change ship-to party address in ISA B2C. This happens only from the checkout.inc.jsp. The ship-to party is part of the basket object.
    Cheers,
    Ashok.

  • How to change the page color from white to gray in Indesign?

    While working on a document, the white pages (not pasteboard) appears too much bright to eyes. Is there any way to change the pages color from white to medium gray at display level only i.e. that gray should not appear while printing the document pages?
    Thanks,

    You haven't told us what version of InDesign or what operating system.
    If you have InDesign CC, you can change the color of the panels (Preferences > Interface). If you turn on Match Pasteboard Color in the same preference, you can make the pasteboard darker.
    However, to change the color of the page, you need to change your monitor brightness. On a Mac, that would be System Preferences > Displays and drag the brightness slider to the left.

  • How to change the SOAP version from 1.0 to 1.2 while registering to ESB

    Hi All,
    I have problem here,
    Is there any possibility to change the soap version from 1.0 to 1.2 for oracle ESB.
    Because it is using SOAP1.1 while registering any service to ESB, Is there any possiblity to change it.
    Hi guys is there any solution for this...........:-(
    OR Will SOA suite 10.1.3.4 supports SOAP 1.2 ?
    Cheers,
    Kalyan.P

    Hi,
    The current version of ESB does not support SOAP 1.2. You need to make sure your message contains the correct SOAP 1.1 namespace so ESB uses the correct SOAP version:
    SOAP 1.1: http://schemas.xmlsoap.org/soap/envelope/
    SOAP 1.2: http://www.w3.org/2003/05/soap-envelope
    For SOAP 1.2 you have to wait until 11g SOA Suite is released.
    Kind Regards,
    Andre Jochems

  • How do I change the name on on imovie project??

    seems to be no way to change name of project? can someone help?

    Mac OS X v10.6 and earlier: How to change user account name or home directory name

  • How to send the transport request from one client to other client?

    Hello Friends,
    I have generated one transport request in one of the client in Development server.Now as it is  customizing request so unless and until i transport it to other client within the same server, Changes will not be visible in other clients.So how to transport this customizing request from one client to other client within the same server.
    Thanking you guys in advance.
    Regards,
    Jitendra

    Hi Jitendra,
    Release your Transport Request via SE10, then go to STMS & import the request first to your quality server, then to your production server.
    Apologies for the incorrect inputs, please use SCC1 as advised by other forum members
    Hope the above clarifies your query.
    Regards,
    Vivek
    Edited by: Vivek on Mar 16, 2009 1:05 PM

  • How to adjust the format of an iMovie project in iDVD?

    Hello there,
    I need urgent help for a project.
    I want to adjust the format of an iMovie project in iDVD so that not only the TV safe area but the whole clip appears on the TV screen. Is there anybody able to help me?
    And is it possible to add chapters, either in iMovie or in IDVD?
    Thanks a lot in advance.
    Later.

    While we all have MacBooks in this forum not all of us use iMovie or iDVD. There're iMovie and iDVD Support Communities where everybody has iMovie and iDVD. You should also post this question there.
    https://discussions.apple.com/community/ilife/imovie
    https://discussions.apple.com/community/ilife/idvd

  • How do you CHANGE the location (away from Drive C) where Firefox stores temporary files?

    I know where Firefox stores temporary files. I want to CHANGE this location away from Drive C to decrease writes to an SSD. Thank you.

    Thank you.
    This function may be one of the few things that IE does better than Firefox. IE lets you change the temporary file location in Tools - Internet options - Settings. Firefox developers should make this task easier and put the instructions in the Help file where they can be easily found.
    Since I use an SSD for Drive C, I have learned that any file(s) that are frequently written to should be moved elsewhere to a conventional HDD.

Maybe you are looking for