How to change the responsible in a service order

Hi.
Does anyone know how to change the responsible in a service order?
I am working on CRM7
Thanks
Rob

Hi Radek
It falls in to an endless loop, cause the 'CRM_ORDER_MAINTAIN' calls the BAdI 'ORDER_SAVE', because of that I have to find the right place to call the function 'CRM_ORDER_MAINTAIN'.
I have done an example calling the 'CRM_ORDER_MAINTAIN' out of 'ORDER_SAVE' using hard coded values and it works.
Thanks
RoB
Edited by: Roberto Quezada Olmos on May 26, 2009 3:23 PM

Similar Messages

How to change the Profit Center in Sales Order

Hi Gurus,
Previously they setted the profit center (YB999) in sales order, now i want to change the profit center and need to give the amount into this profit center 100500.
So, could you guide me how to change the profit center in sales order.
Thank you for your replies.....
Thanks & Regards,
Chandrababu.B
Edited by: Chandrababu Naidu on May 25, 2011 12:44 PM

Hi
If this SO is processed partially - i.e. transactions happened - You cant change it
You can use ABAP and change it in Debug mode, but not advisable... Better to short close the SO and open a new SO for Balance qty
br, Ajay M
Edited by: Ajay Maheshwari on May 25, 2011 5:10 PM

How to change the status of a production order

Dear All,
May i know how to change the status of a production order.I want to de-active the status like OPGN (Operation generated).This status is updated as there was no routing assigned to that particular production order during its creation
Thanks and Regards,
Varun Siddharth

Dear,
When you create a production order, an operation created by the system is generated automatically if no routing is used for the creation. As a result the order header receives the status HOGAN; the operation created automatically also has this status.
If you delete the operation created automatically and then do not have the status HOGAN.
To avoid this maintain the Routing for the material or delete the setting of default operation from OPJG.
Regards,
R.Brahmankar

How to change the pricing rate of Sales Order after delivery is created?

Is it possible to update(change) the pricing rate which belong to a specific condition type, of the "Sales Orders" after corresponding delivery is created ?
number of the Sales Order to be changed is huge. How can I handle this situation ?
immediate replies would be rewarded

Repricing is only possible if your pricing record has a valid from date that is equal to or before the pricing date on the order. Otherwise, your pricing rate change will be applicable only from the begin date of that record.
Assuming that it is allowed by config, you can go to VA02, go to conditions, and then there is small button at the bottom, that says 'Update'. By pressing that, your system will automatically reprice the sales order, provided, as I said, all pre-conditions are met. Once you know that you can do this, then you can adopt any of the technical solutions that Rich had suggested above to do the mass changes.

How to get the Attachment ID for Service order in CRM

Hi Guys,
I need to delete the attachments in Service order; can I use the FM CRM_ICSS_DEL_ATTACH_OF_OBJECT?
This FM required in Attachment ID as input, could you please any one help me.
Thanks,
Gourisankar.

I have never used this function module before, but looking at the coding, I don't think this will serve your purpose.
I think it might be better to use method(s) from class CL_CRM_DOCUMENTS.
Via the GET_INFO method you can retrieve the documents you need and using the DELETE method should delete these object. I did use the GET_INFO method etc. but we haven't deleted any objects. But according to the name of the method, it should DELETE the documents.

How to change the default time?

when you finish the action of dialing ,the CCM system recognize your finish after 10s .How to change the default time in Service Parameters ,which is the detail Parameters ?

Please see the following link for information on configuring the interdigit timeout.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml
Hope this helps. If so, please rate the post.
Brandon

How to change the endpoint url of the siebel service ?

Hi All,
JDev : 11.1.1.5
I am fetching data from the siebel webservice. I created the proxy client from the Siebel WSDL in the JDeveloper. It was working fine.
Now the endpoint URL(Server) is changed. This service fails to connect to that server. The service name is same.
I want to fetch the end point urls from a property file, so that, even again if the server is changed, i have to change it in my property file.
How to change the End point URL at runtime before calling the service ?
This is my endpoint URL.
http://oa8181.us.oracle.com:10800/eai_enu/start.swe/#%7Bhttp%3A%2F%2Fpolicing.oracle.com%2F%7DPolicing_spcQuery_spcIncidents_spcWF?wsdl?SWEExtSource=WebService&SWEExtCmd=Execute&UserName=AUSTINP&Password=AUSTINP
Now it is pointing to this
http://oa8023.us.oracle.com:7777/eai_enu/start.swe/#%7Bhttp%3A%2F%2Fpolicing.oracle.com%2F%7DPolicing_spcQuery_spcIncidents_spcWF?wsdl?SWEExtSource=WebService&SWEExtCmd=Execute&UserName=AUSTINP&Password=AUSTINP
Give me some solution.

See if this helps:
http://kingsfleet.blogspot.co.uk/2008/12/controlling-what-service-proxy-uses-at.html

Hello. I began with the DPS. Is it possible to publish a magazine for a limited, specific target group? For example, in one department of a large company? Or to the responsible for various services? If so, how should I do? Thank you for your help.

Hello.
I began with the DPS. Is it possible to publish a magazine for a limited, specific target group? For example, in one department of a large company?
Or to the responsible for various services? If so, how should I do? Thank you for your help.

Short answer is yes.
Click the request for consultation link in Digital Publishing Suite Help | DPS pricing options to receive a price estimate for the DPS license your project.

How to change the Org Data depending on the Person Responsible?

Hi Group,
I have a requirement relating to Org data changing as :
while creating the activities in CRM, by default I was getting the Org data for the person responsible ( whoever has created the Activity ).
there is a provision that, we can change the Person Responsible for the Activity.
and when the Person Resp is changed, the Org data also to be changed accordingly....
But, this was not happening due to some technical reasons....
So please give me some inputs as how to change the Org data according to the changes to the Person Resp.
Thanks in advance.
Regards,
Vishnu.

for this u have to maintain the rules profiles and attach this to transaction type for header or item category
documentaion is there
spro ->MD->org managment ->org data deter -->change rules and profiles

How to change the default Path of Prompt Played by MicroApp

Hi
I need to store all the Self Service application prompts in dedicated Media Server. I can modify location of all the Media files by passing the related URL form CVP application, however I need to know how to change the default location of Prompt file played by Play Media Microapplication in ICM Scripting.
Currently the default location taken by Play Media Micro App is the Media _Server.variable path set for VXML Server location while I have a separate Media Server.
Please advice how we can customize the MicroApp Media path.
regards
Kapil Kumar

Hi Kapil,
Try this in your ICM script, define set variables i.e.
set Media Server= ip address of media server
set Locale = en-us
set input Type = DTMF only
set App Media Lib = " you new location i.e. test "
So, the application path will be
http://media server ip address/en-us/test
hope this helps.
Cheers

How to change the default port of webdispatcher

Hello Everyone,
We wish to know to how to change the default port of SAP webpatcher port from 81$$ to 80.
Appreciate your response.
Thanks,
Vadi

Hello Vadi
you have to change the PORT value in your profile parameter from 81$$ to 80
icm/server_port_0 = PROT=HTTP,PORT=81$$ to
icm/server_port_0 = PROT=HTTP,PORT=80
Also, in SMICM, then change http service port and activate it and above parameter will require SAP restart
$$ is used generally to accomodate multiple port services running in SMICM and so as to avoid the parameter setting according to instance number of any system.
thanks
Bhudev

How to change the default save encoding of the dvm files when create dvm???

When I creating a DVM(domain-value mapping) in Chinese on the ESB control and confirm it, then restarted the SOA service, the DVM that I created in Chinese disappeared from ESB control. All the maps(both English and Chinese ) are in DVM Repository.
After I updated the encoding from ‘UTF-8’ to ‘GB2312’ in the three files below, and restarted the SOA service, the DVM in Chinese appeared on ESB control.
But when I adding the second row in Chinese and save it, then restart the SOA service, the DVM in Chinese disappeared from ESB Control once again. Because the encoding in the three files below is updated from ‘GB2312’ to ‘UTF-8’ .
Files:
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm\Chinese.xml.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\content\files\dvm\Chinese.xml_1.0
How to change the default save encoding of the dvm files when create dvm in ESB control ???

I have the same problem. When I updated to Mavericks now the bookmarks bar font is huge. I liked it the way it was before. I liked the smaller font. Also wish I could change the color of the sidebar and font/folders too.
I tried to see in preferences if there was anyway to change it, but I don't see anything there.

How to change the default servcie port number to be checked for the IPS sig

Dear
i have an AIP-SSM (IPS) installed in a an ASA firewall.
i have configured an access-list in the firewall to forward the traffic coming from the internet toward the internal server to be checked by the IPS module.
but the case is that the services have to be checked is not the default services port numbers.
http port is 8081
oracle port is 2006
and many other services.
the question now, is how to change the default service number in the IPS in order to be checked by the corresponding service signatures?
Thanks

You would set those as part of the signature variables.
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_signature_definitions.html#wp1040009

How to change the initial page without open safari

Hi everybody,
I have problems opening my safari because of the plugin silverlight. I defined a tvair.swisscom.ch page as initial and it makes an error open it. it means that my safari doesn't work at all.
i want to know if somebody knows how to change the initial page from safari without open safari and solve this problem.
thx
cheers
nun

Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Preferences/com.apple.Safari.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test. Optionally, restore the file from a backup that predates the problem.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

How to change the HTML/XML test data to test my_abap_proxy in SE80?

Hello,
I am trying to test my_abap_proxy in SE80 by usng a HTML/XML file of my desk top, the test data is as below
<LoadingDate>20110422</LoadingDate>
<DocumentDate>20110422</DocumentDate>
<SDDocumentCategory>G</SDDocumentCategory>
so on.......
Now, i want to change the Loading date in this test data, so, i tried after Loading file in Test Service Provider screen of my_abap_proxy of SE80, but i could not make change ANY data in this test data, pls. let me know how to change the data?
Thank you

Hello ABAP_SAP_ABAP ,
Youneed to select the option "generate template data " and then on the displaying template there you will see the option for editing in the top left corner toolbar.
Then after editing you can do a XMl syntax check and test your proxy.
Hope this helps.
Thanks,
Greetson

How to change the responsible in a service order

Similar Messages

Maybe you are looking for