How to change the sequence that VL10 use for sales order during DN creation

We are using VL10 for DN creation , VL10 is executed in  background as a batch job ..... we have created a variant and have given range of shipping points for which we want to create  the Deliveries.
What we want to understand is that how SAP standard code for VL10,  sorts the sales orders for which the delivery are to be created using VL10?
we would like VL10 to process the sales order which belong to same shipping point in some order....so that delivery needs to be created for the first sales order rather than last sales order for a given shipping point....
Is there any sort order that SAP follows to pick which order it will consider for delivery creation ....first over the other sales order where the shipping happens to be same ?  if yes then is there any way we can change it  ?
Any guidance is appreciated
Thanks
Rajey

We are facing the same problem and are running at 4.7.
There are orders with the same goods issue date and if so, it should be sorted by order no.
Nevertheless, it does not sort it by order no but we could not find yet what the sort criteria is if it runs in the background and how to change these rules.

Similar Messages

  • I need to know how to change the identity (email address) used for the iTunes store as I no longer use that email

    I need to know how to change the identity (email address) used for the iTunes store as I no longer use that email.

    Settings > iTunes & App store.
    Tap AppleID, sign out then sign back in.
    The Apple ID is right everywhere else. I've synced the phone. I've reset it in Settings on the phone. I've changed it at Apple.
    When you write, "I've changed it at Apple, this means you updated yoru old AppleID or you ceated a new AppleID?

  • How to change the status of material while creating sales order via BDC

    Hai.
    In BDC while creating sales order( va01 posting ) it is stucking up in middle saying material is new. I.e Sales order (va01) is not  getting created because  of material status is new . I want to create sales order  (va01) even  material status is new.
    pls give me out the solution. Points will be rewarded.
    thanks & regards,
    sami.

    Hi,
    If you drag the line item a little towards the right side, you will find a filed material entered. The one you see in the material filed on sales order over view screen is the one determined. You can as well double click and see the fields material entered and material determined.
    Is there anything else you are expecting to see as part of analysis ?
    Regards
    Sadhu Kishore

  • How to find the objects that are used for a particular BEx query

    Hi ,
    I am preparing the inventory for BEx queries. Means for a particular BEx query I want to know the correcsponding
    1. Selection screen variables
    2. Characteristics
    3. Restrcited, Calculated and normal key figures.
    I have checked all the BEx query related tabe but unable to find the proper relation between these tables to get the desired output.
    Can you help for table joins to get the output as mentioned above.
    Thanks in advance.
    Regards,
    Sai

    Hi,
    you want find the total information about query details use the T  CODE - RSRTQ.
    give the proper selection then execute.
    please find the doc.
    RSRTQ – Query Definition – Multipurpose T-Code on BEx Queries
    Thanks,
    Phani.

  • I want to change the email that iCloud  uses to send security answers to and i don't know how.

    Hi, i just installed my mavericks and i was going through all my settings and keychains and everyting. Last month i deleted the email account that i think we use to send the answers of the security questions on and i forgot the answers. I want to change the email that iCloud  uses to send security answers to and i don't know how. Can it be done?

    You need to contact Apple. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
    (91794)

  • I am a loyal iphone user and of course mine is the 3g iphone.. is that any solution on how to fix the whatsapp that cannot used on all 3g iphone?? i'm not gonna change my phone since i still love my old iphone 3g???

    I am a loyal iphone user and of course mine is the 3g iphone.. is that any solution on how to fix the whatsapp that cannot used on all 3g iphone?? i'm not gonna change my phone since i still love my old iphone 3g??? Please reply me. Thanks

    There is nothing you can do. The iOS for the iPhone 3G is too old to run WhatsApp

  • No question, I just wanna say thanks to the person who discovered how to change the correct dns to use FaceTime. The 8.8.8.8. Really work. Genius. Thanks again.

    No question, I just wanna say thanks to the person who discovered how to change the correct dns to use FaceTime. The 8.8.8.8. Really work. Genius. Thanks again.

    solved

  • How to change the color background in Pages for iPad?

    how to change the color background in Pages for iPad?

    You can find many themes at https://github.com/hdoria/xcode-themes  There's a download zip button on the right side of the page.
    Unzip and and copy the .dvtcolortheme files into /Users/YourUsername/Library/Developer/XCode/UserData/FontAndColorThemes Create the directory if it doesn't exist.
    If you can't find the Library directory you can get to it by using Finder's "Go to Folder..." option under "Go" or press shift + cmd + G then type the path.

  • HT204053 I want to use the same apple id for iTunes and iCloud...but I have both set up..my problem is I want to use the one that I use for iTunes for both

    I want to use the same apple id for iTunes and iCloud...but I have both set up..my problem is I want to use the one that I use for iTunes for both

    iForgot.com

  • The iCloud id on my Mac is my old mobile me id. I use a different id for purchases which is also the I'd used on my iOS devices. Is there any way to replace the iCloud apple id on the Mac to make it the same as the one that I use for purchases?

    The iCloud id on the Mac is the old mobile me one. I no longer have any use for it and want to use the id that is used for purchasing and is on my iOS devices. It would enable me to make better use of I stream between the Mac and the iOS devices

    Sign out of icloud in system preferences and sign in with the one you want to use.  Just be sure to backup icloud-synced data first, before signing out, if you have any data associated with that account you care about.  Then you can reimport it after.  If you only want the information that is currently syncing on your mobile devices, then it's simply sign out with the old MM one and sign in with the one on the mobile devices.

  • The vibration on my iphone 5s. i tried restarting it that didn't work. i went to setting made sure vibration was on. i also tried changing the vibration that is set for when my phone rings and it didn't vibrate when i did that. what should i do?

    the vibration on my iphone 5s. i tried restarting it that didn't work. i went to setting made sure vibration was on. i also tried changing the vibration that is set for when my phone rings and it didn't vibrate when i did that. what should i do?

    Check http://support.apple.com/kb/TS5419 and be sure both ends of the connection are properly updated.

  • Can I use the harddisk that I used for Time Machine on my previous computer on my new computer without deleting the old back-ups?

    Can I use the harddisk that I used for Time Machine on my previous computer on my new computer without deleting the old back-ups?

    Yes.  See:
    http://pondini.org/TM/4.html
    My only concern is that you may not have enough free space on the drive.

  • How to find the TCODE that is created for the table maintanance generator

    Hi ,
    How to find the TCODE that is created for the table maintanance generator of particular table,if we only know the table name.
    Regards
    Ramakrishna L

    Hello,
    I try it this way
    1. Goto SE16 --> enter table TSTCP.
    2. In the selection-screen displayed, enter
    PARAM = *<ZTABNAME>*
    You will get the t-code for the TMG.
    BR,
    Suhas
    PS: Are you sure a t-code has been created for this TMG ?

  • Change the Sold to Party(SP) in sales order in change mode

    Hi,
    Is it possible to change the Sold to Party(SP) in sales order in change mode?
    If yes then How??
    Regards
    Somnath

    Hi somnath,
    It is very much possible to change the sold-to-party in the change mode of Sales order(VA02).
    Goto VA02-->enter the sale order number.
    Press enter.
    In the overview screen if you change the sold-to-party then every thing will be redetermined(Taxes and pricing procedure etc...).These will be determined from CMr etc.
    You cannot change the sold-to-party at the partners tab that is present in the Header details.
    It will be greyed out.
    If you change the sold-to-party at the overview screen as suggested earlier it will not apply to the item.
    You are also going to see this message while changing.
    And finally save the document.
    Regards,
    Krishna.

  • User Exit to change the Ship-to party address at Sales Order headder level

    Hi,
    I have requirement like this......
    I need to change the  ship-to party address at Sales Order headder level. for that which user exit i need to  use and which structure i need to use to update the transaction.
    I used : userexit_save_document_prepare, in that i passed data to 'xvbpa' and 'xvbadr' structures. even though it is not update the transaction.
    Please let me know the answer.
    Thanks,
    Satish.

    Hi Satish,
    Step1. Create new Data Copy Routine using Tcode VOFM.
    Step2. *-----------------------------------Ship to Party from contract
       IF CVBPA-PARVW = 'WE' OR
          CVBPA-PARVW = 'SH'.
        REFRESH IT_STP.
        SELECT KTOKD
               A~KUNNR
               NAME1
               NAME2
               A~ADRNR
               FROM VBPA AS A INNER JOIN KNA1 AS B ON A~KUNNR = B~KUNNR
               INTO CORRESPONDING FIELDS OF TABLE IT_STP
               WHERE VBELN = CVBPA-VBELN . 
    Step3.
       CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
            EXPORTING
              ENDPOS_COL   = 80
              ENDPOS_ROW   = 10
              STARTPOS_COL = 10
              STARTPOS_ROW = 5
              TITLETEXT    = 'Your Title'
            IMPORTING
              CHOISE       = T_SELIDX<=====Index No of selection
            TABLES
              VALUETAB     = IT_STP
            EXCEPTIONS
              BREAK_OFF    = 1
              OTHERS       = 2.
    Step4.
           READ TABLE IT_STP INTO WA_STP INDEX T_SELIDX.
            IF SY-SUBRC = 0.
              CLEAR:CVBPA-KUNNR, CVBPA-ADRNR.
              MOVE WA_STP-KUNNR TO CVBPA-KUNNR.
              MOVE WA_STP-ADRNR TO CVBPA-ADRNR. <========Address ID (Change Here).  
           ENDIF.
    Regards,
    Amrendra
    Moderator Message - Please do not reply to old, dormant threads.
    Message was edited by: Suhas Saha

Maybe you are looking for

  • Error while running webdynpro application with an Interactive form

    Hi all, I am getting the following defect when I run a adobe interactive form (webdynpro application). Any pointers? Regards, Deepak 500   Internal Server Error Failed to process request. Please contact your system administrator. Error Summary While

  • Adobe Photoshop cc 2014 I can't run scripts in html5!?

    I'm having some trouble migrating into the new html5 interface development. I immediately jumped from cs6 to cc 2014 and while I do realize that the extension builder for the latest cc suite has not yet been implemented yet. I really need to get used

  • How can I remove a Creative Cloud Free membership from my account?

    Thanks in advance for any help. I have Creative Suite 6 installed. I started to use CC and decided I didn't want it anymore, so I let the account lapse this month. The computer automatically switched now to a Creative Cloud Free membership, but how c

  • Help! Change of number

    So my iPhone was stolen the other day and i've now got a replacement along with a new number which is all fine by me. However, I had my phone linked to both my Macbook Pro and iPad, which means they're both still using my old number for imessage and

  • Failed (10) error on attempted export from QTPro 7.1.3

    I created a movie to play on my new 5G iPod using the video capture in QTPro with H.264 setting. I then tried to export in iPod format and received error message: Failed (10). Where did I go wrong?