How to change the SOAP version from 1.0 to 1.2 while registering to ESB

Hi All,
I have problem here,
Is there any possibility to change the soap version from 1.0 to 1.2 for oracle ESB.
Because it is using SOAP1.1 while registering any service to ESB, Is there any possiblity to change it.
Hi guys is there any solution for this...........:-(
OR Will SOA suite 10.1.3.4 supports SOAP 1.2 ?
Cheers,
Kalyan.P

Hi,
The current version of ESB does not support SOAP 1.2. You need to make sure your message contains the correct SOAP 1.1 namespace so ESB uses the correct SOAP version:
SOAP 1.1: http://schemas.xmlsoap.org/soap/envelope/
SOAP 1.2: http://www.w3.org/2003/05/soap-envelope
For SOAP 1.2 you have to wait until 11g SOA Suite is released.
Kind Regards,
Andre Jochems

Similar Messages

Change the Product version from ECC to ERP 6.0

Hello Experts
I am planning to apply EHP4 on my Development ECC system. In line with the the suggestion from guide "How to install SAP Enhancement Package 4 for SAP ERP 6.0" system I am supposed to define my ECC system with leading product version ERP 6.0.
My Ecc system is currently defined with Product version SAP ECC 6.0.
As per the above guide and also suggestion from "Note 1344564 - Maintenance Optimizer: Check system landscape" which says-
"In particular for a system of the product SAP ERP, assign the product version of SAP ERP, not SAP ECC."
I am supposed to change the leading product version to ERP 6.0.
Now with the current definition of system with product version SAP ECC 6.0, it is being used in a logical component. In order to change this I need to delete the associated logical component. The problem is -this logical component is being used in more than one Project definition that has huge documentation associated with them.
My question -
will the deletion of current logical component affect my documentation in any way?
How can I change the product version from SAP ECC 6.0 to SAP ERP 6.0 without affecting the current setup?
Regards
Dhiraj

Hello Warren,
Thanks for the suggestion.
I have already taken care of all the suggested notes in the master note that you suggested. I am able to generate the XML file for other solution defined in my system. In those I have my ECC system defined purely as ERP 6.0 system. I am not able to make out why its not generating the XML for this solution.
Regards
Dhiraj

How to change the Unitprice value from 2 decimals to 3 decimals in script

Hi Gurus,
how to change the Unitprice value from two decimals to three decimals for each item level for PO in script.
Please provide some possible solutions.
Thanks,
V.V.

Hi,
Check the options available like
&VAR(.2)& this will print 2 decimals
&VAR(.3)& this will print 3 decimals
need to change the value for how many decimals you need
Thanks & Regards
Sarves Sombhatla

How to change the file type from IMOVIE PROJECT to other types of file

how to change the file type from IMOVIE PROJECT to other types of file??
thank you very much for your help=]

I am not sure what you mean, but once you make a project. Then go to the share menu and you can export the project to iDVD, itunes, mobileme, quicktime.
Share export quicktime movie will allow you to export to a variety of codecs. What specific export are you looking to share the movie in? What is the final source that the movie will be displayed?

How to Change the Development Class from $TMP to YABAP in Layout

Hi all,
How to Change the Development Class from $TMP to YABAP in Layout( SE71).
Thanks & Regards,
N.L.Narayana

Hi,
it is possible with SE03. you just click on Change <b>Object Directory Entries</b> under the tree menu <b>Object directory</b>, and then enter in the last column of table control
Check the check box and enter FORM and formname,
R3TR FORM SAPscript form
then execute it.
then you will be able to change it to PACKAGE from $TMP
regards
vijay

How to change the midp version in ktoolbar of wireless toolkit 2.1

Hi
How to change the version of midp in ktoolbar of wireless tool kit 2.1
though i tried to change the platform by selecting midp1.0 from settings
dialog box iam geeting alert:BadVersion Error
and the application is terminated abruptly
do i need to change any configuration files
please suggest me
as it is very urgent

The version of Java inside the database? If so - Not recommended at all ... the environment is NOT the same as your grandfathers JRE and there are a few noteworthy conditions.
How much of the Oracle Java Developer's Guide have you reviewed? http://www.oracle.com/pls/db102/to_toc?pathname=java.102%2Fb14187%2Ftoc.htm&remark=portal+%28Books%29

How to change the Character Set from AL32UTF8 to WE8DEC

Hello!!
I want to know how to change the character set in the database from AL32UTF8 to WE8DEC.
I tried to use the comand ALTER DATABASE CHARACTER SET but I got an error because WE8DEC is not a superset of AL32UTF8.
I need to import tables from a server that uses WE8DEC. So when I do the import to my server, wich has AL32UTF8 , I can't import the rows that include an Ñ.
So I want to change the caracter set to WE8DEC. How can I do it?
Is it needed to change the language configuration? The remote server has AMERICAN_AMERICA, and my server has MEXICAN SPANISH_MEXICO (both uses text in spanish).
Thanks a lot!!

When you export from WE8DEC server what did you use
for NLS_LANG char set? And when importing?
The export was done in another computer because I can't do the export in the server (I have 10g, and the remote server has 9i and the export is not working). In my server, when I tried to do the import, the NS_LANG value was MEXICAN SPANISH_MEXICO.WE8MSWIN1252.
When I try to import to my database I got the error:
import done in WE8DEC character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
export client uses WE8MSWIN1252 character set (possible charset conversion)
. importing USRMCR06's objects into PRIMARIZACION
. . importing table "CHG_FONDOS_MARZO_CD_MOR"
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "PRIMARIZACION"."CHG_FONDOS_MARZO_CD_MOR".
"NOMBRE" (actual: 41, maximum: 40)
Column 1 16623436
Column 2
Column 3 Pymes_1
Column 4

How to change the IDOC Status from 30 to 03

Hi Friends,
In the Partner Profiles Collect IDOCS option is Selected and the Output mode is 4.
In my Custom Program i am Using the Function Module MASTER_IDOC_DISTRIBUTE to generate the IDOCs
I am getting the IDOCs of Status 30.
then in my Custom Program, I am Submitting the IDOCs to RSEOUT00 program.
to change the IDOC status from 30 to 03.
SUBMIT rseout00 USING SELECTION-SCREEN '1000'
               WITH docnum IN gt_range_idocs
               WITH p_compl EQ 'Y'
               AND RETURN.
but still i am not getting the IDOCs of changed status.
I need to get the Changed IDOC status and if the IDOC status is not changed then I need to generate an Error file for the IDOCs data and send that data to customers as a mail.
so my requirment is to call the RSEOUT00 in the Custom Program and Change the IDOCs Status to 03.
When i am Executing the RSEOUT00 Indidually by giving the IDOCs numbers, then the IDOCs Status is going to change to 03 from 30.
Kindly Guide me how to proceed furthur
Thanks in Advance,
Ganesh

Thanks Shrishit,
RC1_IDOC_SET_STATUS changing the Status from 30 to 03.
Its fine, But my Question is will IDOC Data will be reached to XI Server or not.??
means is the functionality of this Program is same as the RSEOUT00.
MY job is to change Status from 30 to 03 only
and then Check the Status of those IDOCs, and if the IDOC is not sended to XI i.e.;03 status, then I need to send the Details of IDOC (i.e.; data in filed IDOC) to Customer Mail ID through an Attachement.
I hope you Understood my AIM, why I need to change the Status in my Custom Program only, by submitting IDOCs to this report .
Kindly waiting for your reply,
Thanks in Advance,
Ganesh

How to change the page color from white to gray in Indesign?

While working on a document, the white pages (not pasteboard) appears too much bright to eyes. Is there any way to change the pages color from white to medium gray at display level only i.e. that gray should not appear while printing the document pages?
Thanks,

You haven't told us what version of InDesign or what operating system.
If you have InDesign CC, you can change the color of the panels (Preferences > Interface). If you turn on Match Pasteboard Color in the same preference, you can make the pasteboard darker.
However, to change the color of the page, you need to change your monitor brightness. On a Mac, that would be System Preferences > Displays and drag the brightness slider to the left.

Using Oracle 11g How to change the Log mode from NoArchieve to Archieve Log

Hi,
I currently using oracle 11g How can I change database from NoArchivelog node to Archivelog node using spfile.
And where exactly the spfile will be located?
My instance is EPM11 in my local oracle is present in D folder where can i found the pfile?
In this path i found 1 pfile in my Local Machine
"D:/Oracle/Product/11g/admin/epm11/pfile" .I have added the following commands in this pfile
# Archive Log Destinations -benr(10/15/04)
log_archive_dest_1='location=/u02/oradata/cuddle/archive'
log_archive_start=TRUE
Then i have ran the shutdown command.
Database instance is showtdown.
After that i am not able to perform startup.
So please suggest me how to change the mode using SPfile and tell me the path where spfile and pfile should be located?
And also do i need to set the "Oracle_Home" path in my environment variables"
Thanks In Advance,
Chandana

user11225122 wrote:
Hi,
I currently using oracle 11g How can I change database from NoArchivelog node to Archivelog node using spfile.
And where exactly the spfile will be located?
My instance is EPM11 in my local oracle is present in D folder where can i found the pfile?
In this path i found 1 pfile in my Local Machine
"D:/Oracle/Product/11g/admin/epm11/pfile" .I have added the following commands in this pfile
# Archive Log Destinations -benr(10/15/04)
log_archive_dest_1='location=/u02/oradata/cuddle/archive'
log_archive_start=TRUE
Then i have ran the shutdown command.
Database instance is showtdown.
After that i am not able to perform startup.
So please suggest me how to change the mode using SPfile and tell me the path where spfile and pfile should be located?
And also do i need to set the "Oracle_Home" path in my environment variables"
Thanks In Advance,
Chandanaremove log_archive_start=TRUE from pfile (it is depricated from 10g onwards)
SQL>startup nomount pfile="D:/Oracle/Product/11g/admin/epm11/pfile/initYOUR_SID_NAME.ora"
SQL>Create spfile from pfile="D:/Oracle/Product/11g/admin/epm11/pfile/initYOUR_SID_NAME.ora"
SQL>SHUT IMMEDIATE;
SQL>STARTUP MOUNT
SQL>ALTER DATABASE ARCHIVELOG;
SQL>ALTER DATABASE OPEN;
SQL>ARCHIVE LOG LIST;
SQL>SHOW PARAMATER SPFILE;
YOU WILL FIND THE LOCATION OF SPFILE
SQL>

How to change the library path from development machine to application serv

hi
how can i change the library path which i developed in windows machine and the library path is c:/fas/dss.pll and now i hosted all forms,menu,library and reports in application server that is running in linux machine now i want to know how to change the library path c:\fas\dss.pll to /oracle/fas/dss.pll.

Hi !
It is standard functionality to change ship-to party address in ISA B2C. This happens only from the checkout.inc.jsp. The ship-to party is part of the basket object.
Cheers,
Ashok.

Changing the ant version from 1.3 to 1.6 in weblogic 6.1

I want to change the ant version. Is it possible and if yes where how to change. Can someone guide me please.

The iPod touch and iPhone cannot be downgraded, iTunes doesn't even offer the option.

HT201272 How to reinstall the previous version from new vesion

How to reinstall the previous vesion from new version?

Previous version of what ? If you mean iOS then downgrading it is not supported.
If you mean a particular app then have got the previous version of it anywhere ? If you have then you can delete the current version of it from your iPhone and computer's iTunes, then add the old version to your computer's iTunes via File > Add To Library and then sync it to your iPhone.

How to change the jdk version of the sun one appserver 8.1

hi
i have installed appserver8.1 with a jdk 1.5 .
i am facing some problem with the parsers (my application needs to use a crimson parsers which is not supported by jdk1.5 i guess)
so i am trying to change the jdk version by changing the asenv.conf file
but the appservers wont start up if i do so.
help !! please

This is strange. Setting AS_JAVA to the install location of your jdk instance should work. I have done it many times.
What kind of errors are you getting in the server log file?

How to get the latest version from DTR

Hi all,
I have all the latest code in my system 1 and i checkined the activites.Now i want all that code in my system 2.
Now i used sync from sources to get the lateset code.
But i am not able to get all the files and the build is getting failed.
Can any one plz help me out
Regards
Padma N

Hi,
Inorder to get the lateset version from DTR i used the procedure given by you.But at the second time if i want to get the lateset version from DTR wat to do??I didnt find the option of create project again because i already have to project in my workspace.
wat to do inorder to get the lateset source code from DTR 2nd time???
Regards
Padma N

How to change the SOAP version from 1.0 to 1.2 while registering to ESB

Similar Messages

Maybe you are looking for