How to change the value of project data in the BPM instance?

Hi Everybody,
I have a situation that after the bpm instance was created. We found that one of the project data/variable contains the incorrection information. Is it a way we can change the value of that project data/variable? I checked the BPM workspace, as administrator, there are not function for it and we can't stop/withdraw the instance. Can we change the MDS database for it? Please advise. It is so important for us that will stop us to move on of our project.
Thanks

As per my knowledge we can not change the value of BPM project variables from outside BPM. If you look at PAPI API also you will find methods to get values from BPM but not to set to BPM.
If this is daily issue for your application then change your design to add a Edit Data Activity (Screen) and then use Grab functionality to get the control to this Edit Data Activity to change the required data.
Else if it is an issue with the only one instance then it is better to Abort this instance and re-create the instance with correct data. Changing value in the MDS database is not encouraged.
Hope this helps.

Similar Messages

How to change default value in "Project file" dialog

I'm new to Labview, and I've encountered an example with a dialog that allows to define a path to a file. If I open the properties on the block diagram of this block the name of the block appears to be "Path Properties: Project file:" The default value points to a different place than where the file installed and the VI won't run untiI I change the path. If I save and open the file, it doesn't remember the change. When the vi is running I can right click the text and there is an option to reinitialize to default. I've rooted around all over the place and can't find where this can be set or changed. How do I change this?

On the front panel, change the control to the desired value.
Now, right click on the control, select Data Operations and Make Current Value Default.
-Matt Bradley
************ kudos always appreciated, but only when deserved **************************

How to change the frequency of pulse train on the fly using an array of values?

Hi all!
First I want to thank U for the great job you are doing for this forum.
Iam still busy trying to control a stepper motor, by sending pulses from my E-series 6024 to a compumotor s6- stepper Driver. I've managed to get it working. I desperately need to control the motor using the values from an array. I believe we can use two approaches for that:
1st - I can get an array of the "numbers of pulses". Each element must run for 10 milliseconds. Using that we can calculate the array of frequencies to send the number of pulses within 10 milliseconds for each specific element. Could we use the arrays of "number of pulses" and frequencies in a "finite pulse train " and up
date with each element every 10 millisecond?
2nd - Or Could we use of the frequency array in a "continuous pulse train vi" and update it every 10 milliseconds?
Please note that I must use the values as they are.
Can someone please built a good example for me? Your help will be appreciated.
Regards
Chris
Attachments:
number_of_steps.txt ‏17 KB
frequency.txt ‏15 KB

Tiano,
I will try to better explain the paragraph on LabVIEW. The original paragraph reads ...
"While in a loop for continuous pulse train generation, make two calls to Counter Set Attribute.vi to set the values for "pulse spec 1" (constant 14) and "pulse spec 2" (constant 15). Following these calls you would make a call to Counter Control.vi with the control code set to "switch cycle" (constant 7). The attached LabVIEW programs demonstrate this flow."
You can make two calls to Counter Set Attribute or you can make a call to Set Pulse Specs which, if you open this VI, you will see that it is just making two calls to Counter Set Attribute. What you are doing with the Counter Set Attribute VIs is setting two registers called "pulse s
pec 1" and "pulse spec 2". These two registers are used to configure the frequency and duty cycle of your output frequency.
The example program which is attached to this Knowledge Base demonstrates how to change the frequency of a continuous generation on the fly. Why continuous? Because changing the frequency of a finite train would be easy. When the train completes it's finite generation you would just change the frequency and run a finite train again. You would not care about the time delay due to reconfiguration of the counter.
If you would like to change the frequency of the pulse train using a knob, this functionality will have to be added in the while loop. The while loop will be continuously checking for the new value of the knob and using the knob value to set the pulse specs.
LabVIEW is a language, and as with learning all new languages (spoken or programatic) there is a lot of learning to be accomplished. The great thing is that LabVIEW is much easier than mo
st languages and the learning curve should be much smaller. Don't fret, you'll be an expert before you know it. Especially since you're tackling a challenging first project.
Regards,
Justin Britten

How to change the default date in Person assignment tab?

Hi experts,
Does anyone know how to change the default date in person assignment tab in cj20n? Currently, the system always take the scheduled finish date to the date of the person assignment tab. Can I change it to the start date?
Thanks and rgs,
Michelle

Hi Michelle,
Goto SPRO->Project system->Dates->Scheduling->Specify Parameters for Network Scheduling, Here you can control the workforce planning dates.
Hope this is useful...
Regards
Aatish

How to change the date format?

Hi,
I need to display the data format as(YYYY-MM-DD). But now it displays(2009-1-9)
Here is my code snippet which i used to display the data format as(2009-1-9)
*<INPUT TYPE=TEXT NAME="date_submitted" MAXLENGTH=20 SIZE=10 VALUE="" onBlur= "return dateSubmitted()">  (YYYY-MM-DD)*
*<SCRIPT LANGUAGE="javascript">*
dateSubmitted()
*</SCRIPT>*
function dateSubmitted()
                    if (document.pgUpdate.date_submitted.value == "")
                         date = new Date();
                         month = date.getMonth() + 1
                         document.pgUpdate.date_submitted.value =
                                        date.getYear() + "-" + month + "-" + date.getDate();
                    return true;
Can anybody help me how to change the date format?
Thanks in advance!

prit123 wrote:
use SimpleDateFormat class. The code is :He posted a Javascript related question, not a Java related question.
Please use forums devoted to Javascript. You're here at a Java/JSP forum.
There are JS forums at webdeveloper.com and dynamicdrive.com. Good luck.
String formatPattern = "yyyy-mm-dd";
SimpleDateFormat sdf = new SimpleDateFormat(formatPattern);
sdf.format(yourdate);yyyy-mm-dd denotes year-minutes-days. Please go read the SimpleDateFormat API as well.

How to change the year in a range of column dates to the new year?

How to change the year in a range of column dates to the new year?

Depends on the pattern of the dates. The last procedure will work for any pattern, or no pattern at all.
For examples.the dates are assumed to be in column A, starting at A2
Sequential dates?
Enter first updated date in the first cell.
Enter =A2+1 in cell A3. Copy the cell.
Select A3 to the end of the list. Paste.
With the cells still selected, Copy, then go Edit > Paste Values.
Evenly spaced dates?
Same procedure as above, but replace +1 in the formula with + and the number of days between dates in the list.
Randomly spaced dates?
Select cell B2. Press option-left arrow to insert a (temporary) column to the left of column B.
Click on the empty cell B2 in the new column. Enter the formula below:
=DATE(YEAR(A)+1,MONTH(A),DAY(A))
Copy the cell, then select B2 - Bn where n is the last ow containing a date to be converted. Paste,
With the cells still selected, Copy.
Click on A2, then go Edit > Paste values.
Click on the column B reference tab to select all of column B.
Hover the mouse over the right end of the reference tab, and click the black triangle when it appears.
Choose Delete Column from the menu that appears.
Regards,
Barry

How to change the execution order of data control and backingbeans

Hi,
I have a form for a BPM human workflow. It has an inputText and a selectOneChoice component in the form.
The list of value for the selectOneChoice is initiated based on the value in the inputText.
I have a data control - JavaBean, which returns a list of values based on a parameter for the selectOneChoice and the parameter is binded with the value of inputText defined in a backingBean. I also set the default value of the inputBox in the backing bean with setValue().
The problem I have is that the data control for selectOneChoice is loaded before the inputText or backingBean is loaded. Therefore, the parameter is null.
I tested the same combination in an ADF web app and it works fine. In the app, the inputText and the backingBean are loaded first and then the value of inputText is sent to the data control.
How can I change the order of the execution? I need to make the inputText and backingBean loading first before the data control for the list of values loading.
Edited by: user626218 on Oct 10, 2012 9:25 PM

Hi,
The inputText is pre-populated based on the user profile in the BPM instance. I tried to render the selectOneChoice if the value of the inputText exists but the data control for selectOneChoice is loaded before the backingBean so it keeps getting a null as parameter.

How to change the date format YYYYMMDD to MM/DD/YYYY

Hi ,
How to change the date format YYYYMMDD to MM/DD/YYYY .
Ex : 20071008 to 10/08/2007
Is there any function module for this ??
Regards
Rahul

Hi Sharma,
check the code:
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-031.
PARAMETERS: date1 RADIOBUTTON GROUP rad1 DEFAULT 'X', "SAP date format YYYYDDMM
date2 RADIOBUTTON GROUP rad1, "Date format like aprial31, 2006
date3 RADIOBUTTON GROUP rad1, "Date format like 31 apr,2006
date4 RADIOBUTTON GROUP rad1, "Date format like DD/MM/YYYY
date5 RADIOBUTTON GROUP rad1. "Date format like DD.MM.YYYY
SELECTION-SCREEN END OF BLOCK b2
FORM getmonth .
SELECT mnr
ktx
ltx
INTO TABLE T_month
FROM t247
WHERE spras = 'EN'.
IF sy-subrc NE '0'.
MESSAGE I "Message - Not able to get month values from the table T247
ENDIF.
ENDFORM.
DATA : temp_date(16) TYPE c,
temp1_date(60) TYPE c,
year(4) TYPE c,
daymonth(11) TYPE c,
daymonth1(11) TYPE c,
month(9) TYPE c,
day(2) TYPE c,
mon LIKE t247-ktx,
len TYPE i .
MOVE date TO temp1_date .
CONDENSE temp1_date NO-GAPS.
MOVE temp1_date TO temp_date .
IF date2 EQ 'X'. "The date format is like Aprial 31, 2007
CONDENSE temp_date NO-GAPS.
SPLIT date AT ',' INTO daymonth year.
IF STRLEN( year ) NE '4'.
error = 'X'.
WRITE : 'Invalid date format.'.
ELSE.
daymonth1 = daymonth.
CONDENSE daymonth1 NO-GAPS.
_len = STRLEN( _daymonth1 ).
l_len = 13 - len.
SHIFT daymonth1 RIGHT BY len PLACES.
CONDENSE daymonth1 NO-GAPS.
month = daymonth1.
CONDENSE month NO-GAPS.
SORT t_month BY monthltx.
READ TABLE t_month WITH KEY monthltx = month.
IF sy-subrc <> 0.
error = 'X'.
WRITE : 'Invalid date format.' .
ELSE.
len = STRLEN( month ).
CONDENSE daymonth NO-GAPS.
SHIFT daymonth LEFT BY len PLACES.
day = daymonth.
CONDENSE day NO-GAPS.
CONCATENATE year t_month-monthnumber day INTO o_date.
ENDIF.
ENDIF.
ELSEIF p_date3 EQ 'X'. "The date format is like 31 apr, 2007
CONDENSE temp_date NO-GAPS.
SPLIT i_date AT ',' INTO daymonth year.
IF STRLEN( year ) NE '4'.
error = 'X'.
WRITE : 'Invalid date format.'.
ELSE.
daymonth1 = daymonth.
CONDENSE daymonth1 NO-GAPS.
SHIFT daymonth1 LEFT BY 2 PLACES.
CONDENSE daymonth1 NO-GAPS.
month = daymonth1.
CONDENSE month NO-GAPS.
TRANSLATE month TO UPPER CASE.
SORT t_month BY monthstx.
MOVE month to mon.
READ TABLE t_month WITH KEY monthstx = mon.
IF sy-subrc <> 0.
error = 'X'.
WRITE : 'Invalid date format.' .
ELSE.
CONDENSE daymonth NO-GAPS.
day = daymonth+0(2).
CONDENSE day NO-GAPS.
CONCATENATE year t_month-monthnumber day INTO o_date.
ENDIF.
ENDIF.
ELSEIF p_date4 EQ 'X' OR p_date5 EQ 'X'. "Date format is like DD.MM.YYYY or DD/MM/YYYY
CONDENSE temp_date NO-GAPS.
IF STRLEN( temp_date ) EQ 10.
o_date0(4) = temp_date6(4).
o_date4(2) = temp_date3(2).
o_date6(2) = temp_date0(2).
ELSE.
error = 'X'.
WRITE : 'Invalid date format.' .
ENDIF.
ENDIF.
IF STRLEN( o_date ) NE '8'.
error = 'X'.
WRITE : 'Invalid date format.'.
ENDIf.
ENDFORM. " f0100_conv_date
Reward if helpful.
Regards,
Harini.S

How to change the IDOC segment data

How to change the segment data for all IDOCs at one shot J.
For exmple E1EDK02-QUALF - 004
                   E1EDK02-RGID - 100000008 (Inquiry No)
               to
       E1EDK02-QUALF - 004
                   E1EDK02-RGID - 200000005 (Quotation)
Any hints, tips.Appreciate your help and more rewards.
Regards,
Cris

Hi,
You can change the IDOC values using the transaction WE09
Give the IDOC number..
Press F8..
Expand the tree..
Double click on the segment..
Then in the menu..DATA RECORD -> DISPLAY/CHANGE..
It will go in change mode..Change the IDOC value..
Thanks,
Naren

How to change the profile value in the pl/sql code without making change in the database

How to change the profile value in the pl/sql code without making change in the database.

I have program ,where if the profiles 'printer and nunber of copies ' are set at the user level, by default when the report completes the O/p will be sent to the printer mentioned in the set-up. but what user wants is
if these Profiles are set for the user running this program automatic printing should not be done.

How to change the posting date at the line item level in a sales order

how to change the posting date at the line item level in a sales order

Hi,
I believe the POSTING DATE will appear on the accounting document
In the Accounting document, the posting date will be based on the Billing date.
Please let me know if you need any more details
santosh

How to change the Credential domain Value in XML gateway?

How to change the Credential domain Value in XML gateway?
configured the XML Gateway trading partner . It is generating the header as given below. but need to change the Credential domain to DUNS.
<Header>
<From>
<Credential domain="olgridap1.lan">
<Identity>53369415-cxml</Identity>
</Credential>
</From>
Desired XML header
<Header>
<From>
<Credential domain="DUNS">
<Identity>53369415-cxml</Identity>
</Credential>
</From>

You might want to check WLP 10.3 & deployment plan & log4j.xml for a similar topic.

How to change the HTML/XML test data to test my_abap_proxy in SE80?

Hello,
I am trying to test my_abap_proxy in SE80 by usng a HTML/XML file of my desk top, the test data is as below
<LoadingDate>20110422</LoadingDate>
<DocumentDate>20110422</DocumentDate>
<SDDocumentCategory>G</SDDocumentCategory>
so on.......
Now, i want to change the Loading date in this test data, so, i tried after Loading file in Test Service Provider screen of my_abap_proxy of SE80, but i could not make change ANY data in this test data, pls. let me know how to change the data?
Thank you

Hello ABAP_SAP_ABAP ,
Youneed to select the option "generate template data " and then on the displaying template there you will see the option for editing in the top left corner toolbar.
Then after editing you can do a XMl syntax check and test your proxy.
Hope this helps.
Thanks,
Greetson

How to change the Unitprice value from 2 decimals to 3 decimals in script

Hi Gurus,
how to change the Unitprice value from two decimals to three decimals for each item level for PO in script.
Please provide some possible solutions.
Thanks,
V.V.

Hi,
Check the options available like
&VAR(.2)& this will print 2 decimals
&VAR(.3)& this will print 3 decimals
need to change the value for how many decimals you need
Thanks & Regards
Sarves Sombhatla

How to change the date and time during OVM installation for Fusion Apps

Hi,
The customer is using Fusion Instance which is a V1 (Build 19) OVM installation shipped by Oracle with Demo Data (including seeded user IDs and roles) in it.
Now they have issue with Date format for the application on the screens is showing MM/DD/YYYY where as it should be (Singapore) Standard is DD/MM/YYYY.
Q/A: How to change the date/time in OVM image
Refer SR : 3-5640792461
Regards
Ganesh Ananthapadmanaban

Not a problem. There are a number of other system and network setup commands that you might find useful at some time. From within the Remote Desktop Admin in the Send Unix Command window type:
networksetup -help
systemsetup -help
That will give you lists of the commands, including the one I posted above, with their basic syntax. They're handy to know.
Cheers.

How to change the value of project data in the BPM instance?

Similar Messages

Maybe you are looking for