How to change the width of the variable screen?

Hi
like in the subject mentioned i need to know how i can change the width of the variable screen....
right now i have to scroll if i want to see the right part auf the variable screen...
maybe i can change the width with css?

Hi,
Using CSS specify the table width for the variable screen and include the Css in the header section of the table.

Similar Messages

  • How to change the width of the whole portlet layout?

    Dear all,
    As we know, now the width of portlet layout has set to 100%. But there is a new requirment from my customer that the width of the whole portlet layout view must be set to 750px.
    So I tried to edit the css file and I found a block:
    #pt-portal-content-view
         margin-top: 0px;
         width: 100%;
    I tried to change the width to 750px, but nothing happened.
    I want to know the way to change the width, thank you all!
    Regards,
    finall
    OK,I have found the place to do it:
    .portalContent          {
         display: block;
         width: 750px;
    I set to 750px,then it works.:-)
    But another question, how to make the content align to the center? I tried a stupid method, add margin-left:
    .portalContent          {
         display: block;
         width: 750px;
         margin-left: 120px;
    In 1024 X 768, it's ok, but it don't work well in 800 X 600.
    When I set the all content width to 750px, I tried the three columns view, the portlet still run over the border.If there is any way to control this? thank u in advance!
    Regards,
    finall
    Edited by finall1980 at 02/01/2007 10:09 PM

    Try this:
    .portalContent {
    display: block;
    width: 750px;
    margin: auto; /* for properly-implemented browsers */
    text-align: center; /* for IE 6 */
    As for running over the 750px, there's nothing you can do about that other than actually narrowing the columns AND making sure that your portlet authors don't produce content that's too wide.
    Chris Bucchere | bdg | [email protected] | http://www.thebdgway.com

  • How do I change the width of the x-scrollbar for a waveform graph?

    I have a LV7.1 application that contains a waveform graph and must be usable on several PC with widely varying screen resolutions.  I have decided to position and scale the front panel objects programatically, including the graph itself.  The appearance of the graph is satisfactory on all screens, except for the x-scrollbar.  The width of the x-scrollbar does not change when I change the size of the graph.  I cannot figure out how to change the width of the scrollbar programatically to match the adjusted size of the graph.  Any suggestions?
    Regards,
    Chris

    Chris,
    I don't think that you can change the width of the x axis scroll bar programatically.  One thing you could do though is create your own scrollbar and change it's properties as your program runs.  I wrote a quick example of how you could do this and I've attached it to this thread.
    I hope this helps,
    Justin D.
    Applications Engineer
    National Instruments
    Attachments:
    ChangeXScrollbar.vi ‏116 KB

  • How to change the width of the EditForm.aspx and NewForm.aspx for both new and edited list entries?

    How to change the form widths for the EditForm.aspx and NewForm.aspx files that display both new and edited list entries?

    Hi  ,
    According to your description, my understanding is that you want to modify the width of the New Form and Edit Form of a list in SharePoint 2010 .
    1.Go to your SharePoint site -> your list.
    2.In top ribbon click  List tab(List Tools).
    3.Towards right you will see option as Form Web Parts, click on it, the three forms will be listed there [New Form, Display Form, Edit Form].
    4.Select the one on which you want to increase the width/height.
    5.It will open in edit mode, click on Add a Web Part.
    6. Click on Forms [Categories] => HTML Form Web Part.
    7.After adding the HTML Form Web Part, click on Edit WebPart.
    8.Click on Source Editor, Remove all code from it and put an empty HTML table with width and height as per your requirement ex. to increase width
    <TABLE WIDTH="800px">
    <TR><TD></TD></TR>
    </TABLE>
    9.Save the form and check out your respective modal by clicking on the same in your list view.
    Reference:
    http://sharepoint.stackexchange.com/questions/40580/how-to-modify-width-of-standard-dialog-form-sharepoint-2010
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • How to change the width of the bar of bar charts?

    Hi,
    I am using Crystal Reports 11.
    I created some stacked bar charts. Now, I want to change the width of the bar. Some one told me that I can't do that because it's totally controlled internally by Crystal Reports.
    Really?
    If could, how could I do?
    Thank you in advance.

    Hi,
    The only way you can set the width of the bar is by going to Chart Options (Right-click Chart in Preview Mode > Chart Options > Appearance tab > Decrease the Gap Width).
    Hope this helps!
    -Abhilash

  • How to change the width of the scrollbar

    how to change the width of the scrollbar,
    I wanted to have a large scrollbar in all controls (for a touch screen app lets say) then is that possible?
    Either through CSS, code,
    skins anything really... Any ideas?
    Thanks in advance.

    Hi,
    horizonatal(vertical)ScrollBar.width - in AS/MXML code
    horizontal(vertical)ScrollBarStyleName - for style. But I'm not sure that width getted from css.

  • How to change the width of the auto complete drop down list?

    Hi,
    I implemented an autocomplete mechanism, using ICompletionSession and ICompletionSourceProvider. I have an issue with the size of the drop-down list opened when I use this autocomplete mechanism. The width of the autocomplete list remains the same, even
    if the strings displayed change. This is apparent especially when I hit "backspace" on the already typed string, while the drop down list is opened: the deletion of the last character allows for more completion strings to be used, but since the drop
    down width does not change, the longer strings appear cut.
    Is there a way to force the drop down list to recalculate its width?
    Yoel

    I don't think there's any way, even VS itself can't do that you know, and the interfaces don't have such kind of events or properties.

  • How to change the width of the field?

    Hi all,
    I would like to decrease the width of a field on my report.
    But I can't do it in the Property palette. I am not able to change the width property. The width of the database column is varchar2(255). I do not want to decrease the length of the database column, but only the width property of the field.
    Any ideas?
    Regards
    Leonid Pavlov

    You can't change that from where you are trying because that info is coming from the database. To resize the field just open the layout editor and size the field to the size you want.
    Thanks,
    Tom

  • How can i fix the tab overlapping when i change the width of the url bar with #urlbar-container [focused]?

    I want to create for myself the most minimalistic browser experience as possible and i've put the most used features in the title bar. For purposes of space i had to fix the width of the url bar to a minimum and my intention is to increase it to a fixed width only when #urlbar-container [focused]. The problem is that #urlbar-container will overlap the existing tabs instead of shrinking their space, making it look really bad. It looks wonderful with #urlbar-container:hover, but i can't use that since whenever i want to refresh the wesbite using the button the width of the container will increase moving the button from the place i had the mouse in the first place to click it.
    Fixed width of the url bar when #urlbar-container is not focused:
    http://imagizer.imageshack.us/v2/800x600q90/829/xo4o.png
    Fixed width of the url bar when #urlbar-container [focused]:
    http://imagizer.imageshack.us/v2/800x600q90/34/8o36.png
    This is the css i have for the url bar at the moment:
    <pre><nowiki>#urlbar-container {max-width:225px!important;}
    #urlbar-container {min-width:225px!important;}
    #urlbar-container {transition:0.7s!important;}
    #urlbar-container [focused] {max-width:500px!important;}
    #urlbar-container [focused] {min-width:500px!important;}
    #urlbar-container {transition:0.7s!important;}
    #urlbar {border-top-right-radius:10px!important}
    #urlbar {border-bottom-right-radius:10px!important}</nowiki></pre>

    What method (code) did you use to get the Tab bar displaying in the space used for the Navigation Toolbar (location bar)?
    The Tab bar should be displayed above the Navigation Toolbar.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How to increas the width of the Table in OBIEE Report

    Hi ,
    I am creating a OBIEE report, the report has table and 30 column in it. When I am viewing the report in an excel file , its appearing good but the width of the table is so small if I am viewing the same in internet explorer/PDF .I dont know how to increase the width of the table. Could you please sort this issue out.
    Thanks
    Govindan P

    - you can increase the width of a column -> column format values -> Additional Formatting Options
    increase the width:
    - Report level:
    result tab -> Click on Format container of Table -> Additional Formatting Options
    u can assign value width : 500 height:.....
    - dashboard level:
    Edit options -> section -> Format section -> Additional Formatting Options
    here also u can change the width
    u can assign value width : 500 height:.....
    pls mark it helps....
    Edited by: 979481 on Feb 6, 2013 1:25 AM

  • How to increase the width of the Crystal Report

    Hello All
    How to increase the width of the Crystal report template in the CR designer in .NET 2005 editor ?
    I need to design a report which has to accomodate more number of columns.So achieve that i need to redesign the report having more width.
    CrystalReports version 10.2.3600.0
    Thanks in advance
    Srivatsa

    HI Srivatsa,
    You can make a wider report by creating virtual pages. Virtual pages are the extra pages to the right of the main page that get created to accommodate cross-tabs that are wider than a single page. By inserting a cross-tab in a report then suppressing it, you can create a report that is multiple pages wide.
    Insert and Suppress a Cross-Tab
    1. On the 'Insert' menu, click 'Cross-Tab'.
    2. In the Cross-Tab Expert, click any field and move it into the 'Columns' box, and click any field and move it into the 'Summarized Fields' box. Do not move any fields into the 'Rows' box.
    3. Click the 'Customize Style' tab and select the following check boxes:
    " Suppress Empty Rows
    " Suppress Empty Columns
    " Suppress Row Grand Totals
    " Suppress Column Grand Totals
    4. Click the 'OK' button and then insert the cross-tab into the Report Header section.
    5. On the 'Report' menu, click 'Format Sections'. Click 'Report Header' and select the 'Underlay Following Sections' check box.
    When you run the report you will not see the cross-tab, but you will be able to scroll to the right and see multiple virtual pages.
    ====================
    NOTES:
    " As there are no rows to the Cross-Tab, it does not carry on to Page 2 and the virtual pages do not appear past the first page.
    " To increase or decrease the number of virtual pages do one of the following:
    - Limit the number of records for the field in the 'Column' box of the 'Cross-Tab Expert' using the 'Select Expert'.
    - Change the width of the 'Column' field in the Cross-Tab by moving the edges of the field.
    ====================
    How to Insert Fields on Virtual Pages
    You cannot drag-and-drop a field onto a virtual page, you can only do so on the main page. To get a field to appear on a virtual page:
    1. Insert the field on the main page.
    2. Click the 'Preview' tab.
    3. Drag the right edge of the field to the right, onto the virtual page.
    4. Drag the left edge of the field to the right, onto the virtual page.
    Hope this helps!!
    Regards,
    Shweta

  • How can we configure the width of the table in SAP DB

    Hello sirs,
    How can we configure the width of the table in SAP DB? (<b>i.e to specify the total width of the sum of all columns</b>). I need to change the default value of table width for adding fields with biggger sizes...
    With best regards,
    Sudheesh....

    Hi,
      The restrictions for using SAPDB are available at the following link http://dev.mysql.com/doc/maxdb/en/f6/069940ccd42a54e10000000a1550b0/content.htm
      The 'internal length of the table' is 8088 bytes, which intern maps to the column width attribute.
    Can we change the column width?
    The answer is 'NO'.
    check the general Column width error (-1115) at link below where it is specified that the column width can be altered http://dev.mysql.com/doc/maxdb/en/bb/57f18204fd11d2a96c00a0c9449261/content.htm
    Refer link below for more details on the width of each column (based on the datatype associated with the column). http://orgs.man.ac.uk/documentation/mysql/manual_Column_types.html
    So we will have to judiciously look into the boundary values for each column and set the right length because if the column is char(200) and it holds a null value then length allocated is 200 bytes.
    The restriction cannot be broken.
    Regards,
    S.Divakar

  • How can I stop the add multiple bookmarks pop up from filling the width of the screen?

    Whenever I try to add more than one link to my bookmarks, the pop up that asks to add those links fills the width of the screen. It happens when I try to add all the current tabs to bookmarks, as well as when I use the add on, multi links. This makes it really hard to add links because I have to go to the other side of the screen to find the ok button.
    I want to resize the pop up to a more managable size. However, even though I should be able to resize it, I cannot figure out how. I've also tried minimizing it, but the next time I tried to gather more bookmarks, it was back to the big size again.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can check for problems caused by a corrupted localstore.rdf file.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf

  • As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version.  How can change it back to the laptop version?

    As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version.  How can change it back to the laptop version 5.7?
    Thanks for any help you can provide.

    LR on your laptop is still a desktop version.  It is just now able to upload to the cloud to replicate photos to either http://lightroom.adobe.com/ or an iPad that has LR Mobile installed.
    I think you probably just want to change the LR 5 identity plate back so it doesn’t mention LR Mobile all the time.  Hover over the identity-plate area, and click on the little triangle that appears, then choose Change Identity Plate.

  • How to make a JPanel containing buttons  take up the width of the window?

    I'm creating a GUI and I have a button group that I want to be the width of the window. I have another JPanel on the same window that doesn't have a button group in it and it takes up the width of the window. I don't think I'm doing anything differently creating the two, but I need consistency.
    The best way I can explain this is with code, so I created an example of what I am doing here:
    import java.awt.*;
    import javax.swing.*;
    public class test extends JFrame {
         public test() {
              JPanel win = new JPanel();
              JPanel buttonsPanel = new JPanel();
              JPanel statusPanel = new JPanel();
              win.setLayout(new BoxLayout(win, BoxLayout.Y_AXIS));
              buttonsPanel.setLayout(new BoxLayout(buttonsPanel, BoxLayout.Y_AXIS));
              statusPanel.setLayout(new BoxLayout(statusPanel, BoxLayout.Y_AXIS));
    //          createRadioButtonsPanel
              ButtonGroup buttons = new ButtonGroup();
              JRadioButton currentMap = new JRadioButton("option1", true);
              JRadioButton newMap = new JRadioButton("option2");
              JRadioButton noMap = new JRadioButton("option3");
              buttons.add(currentMap);
              buttons.add(newMap);
              buttons.add(noMap);
              buttonsPanel.add(currentMap);
              buttonsPanel.add(newMap);
              buttonsPanel.add(noMap);
              buttonsPanel.setBorder(
                        BorderFactory.createTitledBorder("Create: "));
    //           createStatusPanel
              JLabel statusLabel = new JLabel("Loading...");
              statusLabel.setBorder(BorderFactory.createLoweredBevelBorder());
              statusLabel.setPreferredSize(new Dimension(400,20));
              statusLabel.setMinimumSize(new Dimension(400,20));
              statusLabel.setMaximumSize(new Dimension(400,20));
              statusPanel.add(statusLabel);
              JPanel statusButtons = new JPanel(new FlowLayout(FlowLayout.RIGHT));
              JButton pauseSearch = new JButton("Pause");
              JButton cancelSearch = new JButton("Cancel");
              statusButtons.add(pauseSearch);
              statusButtons.add(cancelSearch);
              statusPanel.add(statusButtons);
              statusPanel.setBorder(BorderFactory.createTitledBorder("Status: "));
              win.add(buttonsPanel);
              win.add(statusPanel);
              getContentPane().add(win);
              pack();
              setVisible(true);
         public static void main(String args[]) {
              test s = new test();
    }When I compile and run this class I get this window:
    http://img136.imageshack.us/img136/1538/exampleek5.png
    You see how on the bottom, "Status" JPanel takes up the entire width of the window? When the window is resized, the border is also resized. I would love to have the top "Create" JPanel have the same behavior. How do I do this?
    Thanks in advance!

    It can get confusing when using the BoxLayout. The box layout takes into consideration the X alignment of the components as well as the minimum and maximum lengths.
    So I suggest you read the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/layout/box.html]How to Use Box Layout for examples and explanations on how these values are used in the layout process.
    It may be easier to use a BorderLayout for the high level layout manger, since it will resize a components width when added to the NORTH, CENTER or SOUTH.

Maybe you are looking for

  • Print button on Web report.

    Hi gurus, We were trying to add a print button on Web report for printing the result area on the Web report. We followed the steps which has given in the How-to-guide How To Web Printing with Microsoft Excel document. In the document it has mentioned

  • MaxDB Connection Issue for Content Server

    Hi All, We have installed Content Server 6.40 on Windows 203 server. We are able to visit the Url http://host:port/ContentServer/ContentServer.dll?serverInfo But while creatng a repository i am facing issues..its throwing error that "HTTP error: 500

  • Email Templates and Date and Time in GMT Format

    How do I send the date and time captured on the service form to the customer and not how it renders in GMT when sent in the email template Solution: Copy the service form field into a hidden field.  Reference the hidden field in the email template an

  • Using weblogic.servlet.security.ServletAuthentication

    I am currently using weblogic.servlet.security.ServletAuthentication.authenticate(Callback, request) to peform a weblogic form-based authentication/login and would like to see the session stored user info.... The doc for authenticate states that a se

  • Will the query run Oracle 10g?

    Hi, Below is the structure of the emp and dept table.There is a query based on this, please let me know if this query will work ? Table EMP ========= EMPID NUMBER PRIMARY KEY, NAME ADDRESS Table DEPT ========== DEPTNO NUMBER, DEPTNAME select * from e