How to change to "EN" (english) before logging into Netweaver 2004s  portal

Hello,
How do i change the language to english before logging into the netweaver portal 2004s. Once I enter, the language settings are in german and I dont see any option where a language selection can be made. Pls help.
Thanks,
SD

Hello Sebastian
another possibility is that you look in the user admin of your portal (http://<portal_server>:<port>/useradmin
Search for the user you log on with and change the default language there.
Regards
Georg

Similar Messages

  • Hi, after I installed IOS 7, my safari homepage is shown in Chinese. How to change it to English?

    Hi, after I installed IOS 7, my safari homepage is shown in Chinese. How to change it to English?

    Hi everyone,
    I just ran across this issue myself. Very odd to say the least. The language seems fine everywhere except the "favorites" which appear when you open Safari without a current website open. (kind of similar to where a home page would appear). These are not the same as all of your bookmarks, they are more of a "bookmarks bar" equilvalent that you would see when opening a new tab.
    I tried it all to fix this, only to find that Apple is currently investigating the issue.
    For those having this issue, you can call AppleCare, (even if you are out of warranty, since this is an iOS 7 issue, atleast for US and Canada customers) to get assistance. 1-800-APL-CARE for US and Canadian customers. It seems Apple's Engineering team is collecting data on this issue right now, though I am not aware of exactly what is being employeed to fix it.
    If you don't want to call AppleCare or visit an Apple Store, I will say from personal experience that all of the basic troubleshooting steps failed to fix this issue.
    It seems you may want to consider creating an iCloud or iTunes backup. I would also strongly recommend that you sync with iTunes, transfer your purchases in iTunes, and import your camera roll to a computer. And then restoring your device as new using iTunes. And after the restore try restoring from your iTunes or iCloud backup. This should take care of it.
    However in extreme cases, it can take restoring and setting up as a new device (and syncing all the data you can back instead of using any kind of backup) to resolve stubborn issues, when they are based in your settings or content.
    I hope this helps a little.

  • Adobe Premiere CC 2014 after reinstall became russian. How to change it in english? Thank you.

    Adobe Premiere CC 2014 after reinstall became russian. How to change it in english? Thank you.

    Uninstall.
    Go to Creative Cloud App and set in the Preferences, Language of the App to English.
    Re-install.
    I know there is a simpler way by changing a file extention in the root. But I dont know which file and what extention to change to.
    I have seen this for Photoshop.

  • I just upgraded my Photoshop CC to CC 2104 but eventhough my previous  PS language is english Creative Cloud installed Turkish PS  and there is no language choice other than Turkish in preferences menu. Pls let me know how to change language to English fr

    I just upgraded my Photoshop CC to PS CC 2104 but eventhough my previous PS language is english Creative Cloud installed Turkish PS and there is no language choice other than Turkish in preferences menu. Pls let me know how to change language to English from Turkish.

    Hi BulKa59,
    Thats strange. Could you share a screenshot of the CC desktop app preferences panel?
    May i also know the operating system on which you are working?
    Try to sign out from CC desktop app and then sign in back and check if you get the option to change the language.
    Also, what is your operating system language?
    Regards
    ~ Arpit

  • TS3376 how can i tell if someone is logging into my find my iphone account and how can i find out who it is?

    how can i tell if someone is logging into my find my iphone account and how can i find out who it is? Can I add a second layer of password security for Find My iphone?

    Nobody can log in to your iCloud account unless you gave them your password. There is no other way.
    If you shared your password with someone (not a good idea) and no longer want them to have access to your account, change the password and don't share it again.

  • How to find out the users currently logged into ODI

    Hi all,
    How to find out the users currently logged into ODI Work Repository?
    Thanks.

    Hi,
    It stores all the final queries in work rep table i.e "SNP_SESS_TXT_LOG" and the column is "TXT".
    Here u can find all the ODI bkp process queries.Pls specify the SESS_NO for purtivular task u want to check which u can get this in ODI operator.
    I dont think so that it will keep the substituted value(because its implicit and temporary process) but it will keep all the default values in the table SNP_VAR_SESS and the column is "DEF_V".
    Thanks,
    katukota

  • How can stageWebView  keep another cache as logging into my site through simulator on mac also logs me in safari

    how can stageWebView  keep another cache as logging into my site through simulator on mac also logs me in safari plz help with a solution or alternative??  thanks

    You could install Tab Mix Plus, which offers a Duplicate Tab feature you could use after logging in: this should keep the login state intact while creating the new tab.
    See https://addons.mozilla.org/en-US/firefox/addon/1122

  • 2012-model Macbook Air got Mavericks installed but boot up with 1-second brighter screen before logging into my account, is this a bug?

    as above, never got this issue when i was using 10.8.
    now every time when i boot my macbook air, just before logging into my user account, the screen blinks once(screen gets brighter a lot in a very short time about 1 second).
    i've googled around, found there are some fellows who also have the same issue as mine.
    Is this a bug with 10.9 mac os? will Apple fix it???

    Mine is doing the same thing but it has happened to me before on other versions too.
    I tried resetting PRAM and it didn't help.
    Also running real laggy on bootup even thou I repaired permissions.
    I think a patch from Apple fixed my screen before or it was just plain luck because it was working right before this UPGRADE.
    I will be trying a clean install tonight or this weekened for sure to try and fix my issues.

  • Installed SAP Master and can no longer log into old xIEP portal

    Hello there,
    I am very new to SAP so please bear with me.  We were experiencing J2EE Engine connection errors along with no connection to our SLD with our xIEP portal, so I tried to verify that all of our parameters were correct.  I did this by checking prior documentation and opened up the SAP Master Installation and began to verify the settings for the current installation of NetWeaver 2004s that we have.
    However at the end of the installation, I clicked on start and it began to install SAP Master.  Now when we log into our xIEP portal, we can no longer log in with our user id and password, but are able to log in as Administrator.
    I am afraid that when I installed the SAP Master, this might have replaced the old NetWeaver that our portal was running off of.  Please tell me that this isn't true, and that somehow I can get access to our old portal.  Any suggestions would be greatly appreciated.  Thank you.

    You might consider rebuilding the ECP virtual directory:
    http://technet.microsoft.com/en-us/library/ff629372.aspx
    With the EMS, procedure should be the same for Exchange 2010 and 2013.
    Since you state that everything else is working, other virtual directories included (OWA for ex.), it's most likely something with the ECP virtual directory.
    But even before that, I would try to look at the (rather cryptic) IIS logs and see if you cannot find any useful information there:
    http://social.technet.microsoft.com/Forums/exchange/en-US/935eeb5b-d996-4933-9cbd-0347ebad801d/how-can-i-view-exchange-iis-logs?forum=exchange2010
    There were some ideas in this thread but i think you may have seen it already?
    http://social.technet.microsoft.com/Forums/exchange/en-US/1736b5ab-e69b-4637-aa59-f2d9bd54ead2/unable-to-access-exchange-2013-eacecp-webpage?forum=exchangesvrdeploy
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • How can I stop firefox from requesting me to verify or change my password when I log into Monster?

    Whenever I log into my Monster account the first thing that pops up is do you want to change your password? Change Dont Change. I have to click on one of the boxes before this will go away. It is very annoying and I would like to have it removed.

    The site may be using JavaScript to make changes to the password field that cause Firefox to display the update dialog.

  • If my email address is now invalid, how do i change it when i cant log into the current account?

    My parents deleted my old email address that i originally used to log into itunes. I can't download any apps or do anything involving my itunes account(like upgrade to ios 7) on my iphone because of this. Do i have to make a whole new itunes account? If so, how can i transfer all of my music from that account to the new one?

    Hey Peachygrl131!
    This article should be able to help you associate your Apple ID with a new email address:
    Apple ID: Changing your Apple ID
    http://support.apple.com/kb/ht5621
    You could also simply associate a new email address with your Apple ID:
    Apple ID: Associating and verifying email addresses with your Apple ID
    http://support.apple.com/kb/he68
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • How do I fix ? when I log into my yahoo mail the words are so small I cant read it

    Any place else it is fine but about a month ago when I log into my yahoo mail the words are so small I can barley read it. If I go to internet Explorer it is fine but I don't want to use that. It is only in my email.

    Try this :- https://support.mozilla.org/en-US/kb/font-size-and-zoom-increase-size-of-web-pages?esab=a&s=How+to+change+the+size+of+fonts+in+yahoo+mail&r=0&as=s
    This may help you . Let us know if it work !

  • How to capture the user who has logged into the portal.

    Hi,
    How do I capture the user who has logged into the portal.
    HOw do I retrieve the first name and last name of the logged in username.
    Could someone provide me a related link or PDF to work on this.
    Thanks,
    Suvarna

    Hi suvarna,
    Check the following code
    ISearchResult rst = UMFactory.getUserFactory().getUniqueIDs();
                      IUserFactory usf = UMFactory.getUserFactory();
                      IUser iuser = null;
                      IUserListElement userElement = null;
                      int i = 0;
                      while (rst.hasNext()) {
                            iuser =
                                  UMFactory.getUserFactory().getUser(rst.next().toString());
                            String email = iuser.getEmail();
                            String fname = iuser.getFirstName();
                            String lname = iuser.getLastName();
    regards
    Anil Dichpally

  • ODI : how to raise cross reference error before loading into Essbase?

    Hi John .. if you read my post, I want to say that you impress me! really, thank for your blog.
    Today, my problem is :
    - I received a bad quality data file from ERP extract
    - I have cross reference table (Source ==> Target)
    - >> How to raise the error before loading into Essbase !
    My Idea is the following, (first of all, I'm not sure if it is a good one, and also I meet issue to do it in ODI !)
    - Step 1 : make JOIN between data.txt and cross-reference Table ==> Create a table DATA_STEP1 in the ODISTAGING schema (the columns of DATA_STEP1 are the addition of columns of data.txt those of cross-references Tables (... there is more than 20 columns in my case)
    - Step 2 : Control if there is no NULL value in the Target Column (NULL means that the data.txt file contains value that are not defined in my cross reference Table) by using Filter ( Filter = Target_Account IS NULL or Target_Entity IS NULL or ...)
    The result of this interface is send to reject.txt file - if reject.txt file is not empty then a mail is sent to the administrator
    - Step 3 : make the opposite : Filter NOT (Target_Account IS NULL or Target_Entity IS NULL ... ) ==> the result is sent in DATA_STEP3 Table
    - Step 4 : run properly the mapping : source : DATA_STEP3 (the clean and verified data !) with cross reference Tables and send data into Essbase - NORMALY, there is not rejected record !
    My main problem is : what is the right IKM to send data into the DATA_STEP1, or DATA_STEP3 Table, which are Oracle Table in my ODISTAGING Schema ! I thy with IKM Oracle Incremental Update but I get error, and actually I don't need an update (which is time consumming), I just need an INSERT !
    I'm just lookiing for an 'IKM SQL to Oracle" ....
    regards
    xavier

    Thanks john : very speed !
    I understood better now which IKM is useful.
    I found other information about the error followup with ODI : http://blogs.oracle.com/dataintegration/2009/10/did_you_know_that_odi_generate.html
    and I decided to activate Integrity Constorl in ODI :
    I load :
    - data.txt in ODITEMP.T_DATA
    - transco_account.csv in ODITEMP.T_TRANSCO_ACCOUNT
    - transco_entity.csv in ODITEMP.T_TRANSCO_ENTITY
    - and so on ...
    - Moreover I create integrity constraints between T_DATA and T_TRANSCO_ACCOUNT and T_TRANSCO_ENTITY ... so I expected that ODI will raise for me in E$_DATA (the error table) the bad records !
    However I have one issue when loading data.txt into T_DATA because I have no ID or Primary Key ... I read in a training book that I could use a SEQUENCE ... I try but unsuccessful ... :-(
    Is there another simple way to create a Primary Key automaticaly (T_DATA is in an oracle Schema of course) ?thanks in advance

  • How to change the R/3 transac Look and feel in portals

    Hi Experts......
    How to change the look and feel of the R/3 transactions in portals.....
    I need to change the color of the screen display and nodes.
    Is there any easier way to do that....Kindly provide the inputs...
    Thanks in Advance,
    Jasmine

    Hi Jasmine,
    generally you have to "Theme Editor" in the portal which allows top level customization of design elements/ colours for the R/3 applicatins to be integrated into the portal.
    Changed designs on a deeper levels for ITS can be done with SAP@Web Studio. Kindly check the help for further information.
    Hth,
    Michael

Maybe you are looking for