How to change what is used for the condition base value

I have a new condition type that I want to always get its conditon base value from a list price total in the pricing procedure.
Do I need to do this in a routine?  If yes, can you give more details on what should be in the routine.
Thanks

The new condition(ZXXX) which should always have the base value amount of the list price -
Settings
ZXXX in transaction v/06- when defining this condition you have a field under Master data - to use it as reference condition type
over here you can mention the condition for the list price. than it should work.
Hope this helps
Cheers
jasmeet

Similar Messages

  • What to use for the events of 2 keys pressed simultaneously?

    Question:
    What to use for the events of 2 keys pressed simultaneously? As the key listener has limited functionality, in this case, I need something that can act to two events (see below)
    Goal
    1. A user presses right and up at the same time
    2. Program responds to this event changing BOTH the vertical and horizontal speeds of the player
    Problem
    I currently have a key listener to do this, using key pressed, however, it only acts to up OR right at one point in time. So the user can only increase his or her vertical speed; or horizontal speed at one point in time. Instead of increasing them both.
    Example
    Here is an example of the game: http://www.kongregate.com/games/MINDistortion/bubbles-2

    DarrylBurke wrote:
    I don't know whether there's a better way (or whether this will work as expected), but I would try setting a boolean flag on keyPressed and reset the flag on keyReleased, for each key of interest. To compute the x / y movements, I would check the state of all flags.
    dbI was thinking about your answer a few nights ago. And I was like, wait... it works! I thought, at first (as I replied before) that it wouldn't work, but I refract what I said. Its actually a very simple solution. And I apologize for questioning your solution previously. Thanks so much!
    P.S. I tested it out. Works like a charm.
    -Create booleans to handle each key
    -Set to true on press
    -Set to false on release
    -Check and update in separate thread accordingly

  • Change the Condition base value in a Condition type.

    Hi Experts,
    I have a problem because I need to change the condition base value for a condition type. This condition base is calculated as a result of other condition types in the list of pricing Elements. I would need to change the base in order to solve the problem.
    Thank you and best regards.

    Hi Alberto
    if i get it correctly , this is your scenario
    condition 1--- price x
    condition 1--- price Y
    condition 1--- price z
    now you want a fourth conddition with base value total of the above 3
    if so , you maybe define all the above 3 as statistical ,
    in another row , create a total of the above 3,
    assign a sub total this ,
    create new conditon type and in its alt base value , give the formalue for the sub total
    for eg 5 for sub toal 1, 6 for sub total 2
    and then you would get the right base value
    Hope this helps
    Thanks
    Akasha

  • HT201320 I use my college's email address through outlook and I don't know what you use for the incoming and outgoing host?

    My email is though the college where I work.  We use Outlook, and I am trying to set up my email but I am not sure what to use for my incoming and outgoing host information.

    Ask your college. Most likely the same settings as you have set in Outlook.

  • How to change your user name for the Ipod nano...

    Can anyone please explain how to change the user name on your Ipod nano?

    hiya!
    do you mean the nano's name in the ipod source list?
    if so, select the ipod in the itunes sourcelist. click on it once, and pause for a second or so. you should then be able to type in what you please.
    love, b

  • 2 iTunes accounts, unable to change what is used for "updates" on iPad.

    Sorry - this might sound confusing, but I'll try to explain.
    I have 2 iTunes account. My primary Canadian and a US account.
    The US account is only for those situations where I have to redeem a free promo code, etc.
    The problem I'm having is that for normal, every day use my standard account is what I use to download and update applications.
    However now when I try to "Update" apps from the iPad directly, it tries to use my US store account and, since the applications were purchased from my default account, I cannot update them directly on the iPad.
    Updating them on my PC through iTunes works just fine, however.
    I don't know what I need to do to fix this.
    I've signed out everywhere I can on my iPad and signed back into my default account.
    I've done the same through iTunes, I make sure whenever I sync my iPad, I am signed in on my default account.
    Any time I download on the iPad, I generally only use my primary account, and there are no issues with the initial download.
    Any suggestions...??? Did I clarify enough?
    Thanks!

    When you originally set up the iPad did it or does it ask you to log into your iTunes or possibly we're you logged into your US account when you connected your iPad for the 1st time. Have you done a full restore on your iPad...start fresh not a restore from back up.

  • How to view what is using up the temporary tablespace

    Hi all
    I am running into a problem - my temporary tablespace is being completely used up.
    How would i find out what is using up this? Technically it has enough space to function properly but now we are getting 0 bytes free.
    thanks!

    There is nothing wrong if a temporary tablespace appears as full. It is very normal. I
    For more information about temporary tablespace usage query V$SORT_USAGE and V$SORT_SEGMENT .
    For more information go to this link
    http://asktom.oracle.com/pls/ask/f?p=4950:8:14327914180898764224::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:374218170986

  • What to use for the replace XSLT for  0xA charater?

    We are getting data from a vendor and in some text it has a 0xA hex value (newline) in it. I am looking at using a the replace function to remove this from the string but I was not sure what to tell the replace function what to search for. I am using 11.1.1.6 Jdeveloper
    Sorry if this is not the correct place to post this question and thank you for any assistance.

    Please look at the following link :
    http://stackoverflow.com/questions/552762/removing-all-n-r-characters-from-a-node-xslt
    Basically, use the translate(., '
', '') function.

  • I installed update to Mozilla 25 using Premium Installer. Is this what is used for the install?

    I was prompted to update to Mozilla 25. When I did the install, it was done using Premium Installed. Mozilla was not mentioned any where. Was this install correct or did I infect my machine with bogus software?

    Definitely bogus. Someone over at MozillaZine reported this yesterday. See:
    http://forums.mozillazine.org/viewtopic.php?f=38&t=2774195 virus: fake firefox update
    <blockquote> '''Quote:'''<br>
    Just now, when I opened firefox, a dialog appears indicating my firefox browser is out of date and ask me to click ACCEPT to update. I clicked and then a file 'Updater_Setup.exe' is downloaded and saved. I run the file trying to update. The what happens is completely different from my previous firefox updates.
    when I run the downloaded file, a dialog appears indicating a program 'Premium Installer' by TINY INSTALLER is going to run; I click run, then a dialog saying " thank you for choosing our software" I click get started, it comes out another dialog indicating "Express Install 'you are less than 30 seconds away!". I continued, the SW seems trying to install a serial of tools such as Mixi Dj. Definitely, this is not a firefox update. I am wondering whether this Updater_Setup.exe is a virus, malware? Thanks
    </blockquote>
    Be sure to scan your computer for malware or seek help in a forum specializing in malware removal - see [[Troubleshoot Firefox issues caused by malware]] for recommendations.

  • How to change Phone Number used for activation

    Hi,
    just got myself an iPhone and when I activated it via iTunes, it took over my phone number I entered
    in my Mac account (which was my home phone number).
    This number shows now up on iTunes (when the iPhone is highlighted) as "My Number".
    I changed my number in my Mac account profile to the cellular phone number which I use, synched again (even restored the iPhone) but the old number is still shown.
    Is there any possibility to change this entry after activation of the iPhone?
    Thanks for all additional info on this (still an iPhone n00b I am)
    Cheers,
    S.

    You are right,
    it doesn't change anything on the functions itself, it's just hum, let's say "Not good looking:
    I thought that maybe there is an easy way of changing this, but it seems not...
    Anyway, if someone has an idea (maybe I have to call the local Apple Support in France on Monday for asking them though) I would be pleased if you share it with me.
    Cheers,
    S.

  • How many iDevices can you use for the same apple id?

    Id just like to know for future refence if i get an iMac etc.

    As many as you can afford...
    You can load protected content on up to five computers. Those computers can load content onto any device. You can select up to ten computers and iOS devices to recieve automatic downloads of your purchases.
    tt2

  • When adding my icloud account to ical, what do i use for the account URL?

    My wife and I have iphones that we have registered under one email address/account...i recently upgraded our phones to IOS5 and want to use the cloud so we can coordinate our calendars using the iCloud.  I am trying to add our iCloud "account" to our iCal on our Mac and don't know what to use for the "Account URL".  Any help? 

    Hey rid23466,
    Thanks for using Apple Support Communities.
    If you forgot the password to your Apple ID, you can follow this article to recover it.
    Apple ID: If you forget your password
    http://support.apple.com/kb/ht5787
    Have a nice day,
    Mario

  • What to use for INITIAL_CONTEXT_FACTORY for Sun AppServer Platform Ed 8x

    I've got an external java JMS client trying to connect to Sun Java System Application Server Platform Edition 8.1 2005Q1 and I need to know what to use for the Context.INITIAL_CONTEXT_FACTORY (and what jar it's in) plus the PROVIDER_URL for the following code:
    Properties p = new Properties();
    p.setProperty(Context.INITIAL_CONTEXT_FACTORY, ????);
    p.setProperty(Context.PROVIDER_URL, ????);
    Context ctx = new InitialContext(p);
    QueueConnectionFactory qcf = (QueueConnectionFactory)ctx.lookup(factory);

    I experienced similar problems while trying to create a Message Driven Bean
    and send a message to it from a standalone client program.
    After much guddling around (and finally finding some helpful information in
    the App Servers Troubleshooting Guide) I managed to get this to work by doing
    the following:
         1) Including the following jars at client compile time:
              appserv-rt.jar
              j2ee.jar
         2) Including the following jars at client run time:
              appserv-rt.jar
              j2ee.jar
              appserv-admin.jar
              imqjmsra.jar
         3) Passing in the following arguments at client run time:
              -Dorg.omg.CORBA.ORBInitialHost=localhost
              -Dorg.omg.CORBA.ORBInitialPort=3700
         4) Creating the context using the no-arg InitialContext method � i.e.
              Context ctx = new InitialContext();
         Note that this method picks up the initial context factory
         as com.sun.enterprise.naming.SerialInitContextFactory from
         a jndi.properties file in appserv-rt.jar.
    I have included my client code below FYI.
    import javax.jms.Connection;
    import javax.jms.ConnectionFactory;
    import javax.jms.JMSException;
    import javax.jms.MessageProducer;
    import javax.jms.Queue;
    import javax.jms.Session;
    import javax.jms.TextMessage;
    import javax.naming.Context;
    import javax.naming.InitialContext;
    import java.util.Date;
    * @author dlowe8
    public class JmsTest2 {
    /** Creates a new instance of JmsTest2 */
    public JmsTest2() {
    public static void main(String[] args) {
    Connection c = null;
    try {
    Context ctx = new InitialContext();
    String factoryJndiName = "jms/ConnectionFactory";
    String queueJndiName = "jms/Queue";
    System.out.println("Factory JNDI Name = " + factoryJndiName);
    System.out.println("Queue JNDI Name = " + queueJndiName);
         ConnectionFactory cfa = (ConnectionFactory)ctx.lookup(factoryJndiName);
         c = cfa.createConnection();
    Session s = c.createSession(false, Session.AUTO_ACKNOWLEDGE);
    Queue q = (Queue)ctx.lookup(queueJndiName);
    MessageProducer producer = s.createProducer(q);
    TextMessage m = s.createTextMessage();
    m.setText("Helloooo from standalone program at " + new Date());
    producer.send(m);
    s.close();
    Object o = ctx.lookup(factoryJndiName);
    System.out.println("Factory object class [" + o.getClass().getCanonicalName() + "]");
    o = ctx.lookup(queueJndiName);
    System.out.println("Queue object class [" + o.getClass().getCanonicalName() + "]");
    } catch (Exception e) {
    e.printStackTrace();
    } finally {
    if (c != null) {
    try {
    c.close();
    } catch (JMSException e) {}
    System.exit(0);
    }

  • Used of 362 & 363 Alternative formula for condition base value in Define Procedures (Tcode obyz)

    Dear
             what is the  used of 362 & 363 Alternative formula for condition base value in Define Procedures (Tcode obyz)

    362 is used for to pick base value to BASB condition type from MM pricing procedure
    363 is used for all sales tax {VAT (Inventory or set -off) & CST}.
    Tax Calculation on Freight - Different Scenarios
    Please  go through this  link  and  you will know  very well a bout  362 and  363  usage

  • How to display modified condition base value in Pricing Procedure?

    Hi everyone:
    I used a formula to change the condition base value (via the VOFM transaction) of various price conditions that are assigned to the same material. In this way, I can distribute the total quantity of the item line in smaller quantities for each price condition.
    Now the problem is that in the conditions tab of the sales order, I can not see the Condition Base Value of each Price Condition, and that's a little confusing.
    Did Anyone know's a way to show the modified Condition Base Value in the Pricing Procedure of the Condition Tab?
    Thanks a lot,
    Ginno Giuffra

    Thanks JJ:
    Yes,  I can found the modified base value in the condition details, but I still need to show it in the Pricing Procedure scheme.
    It is curious that the table options does not allow you to add that field to the escheme.
    Does anyone knows a user exit wich can modifye the table?
    Thanks again,
    Ginno Giuffra

Maybe you are looking for