How to check CPU support

Wanting to upgrade with a new cpu or running into troubles after having already upgraded frequently the question comes up if the new cpu is supported by the board used.
Before asking about that with a post you should for yourself by just going to your mainboard's product site at msi.com
There just choose your board's category (AMD or Intel Platform) and click on your board's socket and choose your mainboard:
Is your board already out of production and not mentioned you need to click Archive instead of Intel/AMD platform:
In the following pop-up just enter the name of your board, click "search" and you will be directed to the archived product site:
When you finally opened your board's product site click on "support" -> "cpu support" and all supported cpus will be listed as well as the bios version with which support for the cpu has been implemented
Is your new cpu not listed there it is not officially supported which could result in all kinds of problems from just not recognising the cpu's name string to not booting at all. Buying an unsupported cpu is therefor a gamble and not recommended.
If the new cpu is listed, you need to check if the bios installed on your board is supporting the cpu or you need to update. To figure out what bios version you have, >>use the MSI HQ Forum USB flasher<< if you want to upgrade a running system. After starting the MSI HQ Forum USB flasher it will automatically detect your board's current bios and save the details in a file on your desktop called MSIHQ_INFO.txt. There you can read up the exact bios version. Posting in a topic to get assistance you can quote this details to make it easier for others to help you
If you have just the board you can look for a tiny green sticker on the bios chip that has the version of the original bios it came with printed on it.
With new cpu generations coming up MSI usually creates microsites where you can lookup if your older board will support it.
Currently Intel platform users are wondering if their socket 1155 boards are supporting Ivy Bridge while AMD users want to know if their boards support AM3+ cpus (FX) or Vishera (2nd Generation FX) or Richland if FM2 is used. To answer if support is implemented or planned the following microsites can be checked:
>Socket 1155 supporting 22nm (Intel IVY BRIDGE)<
>AM3+ (AMD FX multicore processors) support<
>Vishera (2nd gen AMD FX multicore processors) support<
>FM2 Richland support<

Simply check the product site for cpu support (like instructed in "How to check CPU support"): http://www.msi.com/support/mb/890GXMG65.html#support-cpu

Similar Messages

How to check CPU useage ?

Dear Team
I have one procedure which is executing daily two times(i.e morning run and evening run)
In morning run it's executing around 150 mins and evening run executing around 25 mins.
It's happening for all procedures executing in longer run in morning.
There is NO LOCKS, I have checked LOCKS while executing morning run.
I suspects CPU usage in morining run.
Could you please tell us how to check CPU useage ? AND also each session how much ultlizing CPU.
I'm using oracle 8i database, I know it's older version but my company is using oracle 8i
so i have to look in this database version only
Appricate quick response on this.

user11081688 wrote:
Hi,
please find the below information.
Oracle8i Enterprise Edition Release 8.1.7.4.0 - Production
PL/SQL Release 8.1.7.4.0 - Production
CORE     8.1.7.0.0     Production
TNS for Solaris: Version 8.1.7.4.0 - Production
NLSRTL Version 3.4.1.0.0 - Production
How i can know the process spending on each SID ?only with much difficulty.
How many DBs run on this system?
post FORMATTED results from "top" as shown below
top - 16:47:20 up 7 days, 8:58, 2 users, load average: 0.05, 0.09, 0.03
Tasks: 162 total,   1 running, 161 sleeping,   0 stopped,   0 zombie
Cpu(s): 0.8%us, 1.3%sy, 0.0%ni, 97.3%id, 0.4%wa, 0.0%hi, 0.2%si, 0.0%st
Mem:    909120k total,   784996k used,   124124k free,   133372k buffers
Swap: 1735012k total,   263980k used, 1471032k free,   426644k cached
PID USER      PR NI VIRT RES SHR S %CPU %MEM    TIME+ COMMAND
19010 oracle    15   0 2420 956 704 R 2.0 0.1   0:00.02 top
    1 root      18   0 2156 548 520 S 0.0 0.1   0:11.67 init
    2 root      RT -5     0    0    0 S 0.0 0.0   0:00.00 migration/0
    3 root      34 19     0    0    0 S 0.0 0.0   0:01.73 ksoftirqd/0
    4 root      RT -5     0    0    0 S 0.0 0.0   0:00.00 watchdog/0
    5 root      10 -5     0    0    0 S 0.0 0.0   0:37.01 events/0

How to check CPU % Utilization with SNMP

We are using Ipswitch's What's Up Professional 2006 to monitor devices on our network. Their default snmp graphing utilities use the HOST RESOURCES MIB to collect and graph system performance statistics over time. I have them running perfectly on all my Windows servers, but for my Solaris systems I am only able to retrieve Memory, Disk, and Network Interface statistics. The CPU monitor is unable to retrieve data from our Solaris systems. A typical system is running Solaris 10 with the default agent, NET-SNMP version 5.0.x. Does anyone know if the default agent supports checking CPU usage in the HOST RESOURCES MIB? If not can anyone point me to a different MIB & instance that will return % CPU utilization of a Solaris 10 server? Any input would be greatly appreciated. I've searched everywhere for the solution but I am unable to find any straight-forward answers, hopefully someone can help.

Hi
You can do it via T Code ST02.I am sending you a link hope it help you
<a href="http://help.sap.com/saphelp_erp2004/helpdata/en/02/96263e538111d1891b0000e8322f96/content.htm">Check this</a>
Rewards point if helpful
Thanks
Pankaj Kumar

How to check CPU speed, remove or install softwares? I'm a newbi

Hi all,
I just purchased my MBP yesterday. I'm totally new to this machine. I don't know how to see CPU speed, RAM, or other hardwares on this computer. Also, I don't know if the apple button use for what? I press "apple" and nothing happens. Last, could someone tell me how to optimize the computer? I had 80GB but now I have only 57GB availble. I don't know why this MBP uses so much space.
Thanks again for all your help. I will have more questions for you
P/S: I couldn't find these info by search.

Hi y - Welcome to Apple Discussions!
Hi all,
I just purchased my MBP yesterday. I'm totally new to
this machine. I don't know how to see CPU speed, RAM,
or other hardwares on this computer.
click on the blue apple in the upper left corner of your display (a drop menu will open) then click on About This Mac.
a window pops up. some basic system info is shown there.
for all the add'l details, click on More Info...
that will open up the System Profiler which lists everything hardware- and software-wise...
the System Profiler is also sitting in Applications > Utilities, and you can also start it by double-clicking on its icon there..
Also, I don't
know if the apple button use for what? I press
"apple" and nothing happens.
the apple button on the keyboard is a "command key".
i.e. most applications will quit if you enter the key combination apple+Q.
save is apple+S, and so on.
Last, could someone tell
me how to optimize the computer? I had 80GB but now I
have only 57GB availble. I don't know why this MBP
uses so much space.
fairly typical. the default installation process writes language
localizations, many many printer drivers, and other things
you may not need. you can use the application monolingual
to remove language localizations that you don't want (download
it from versiontracker). printer drivers are generally smaller,
but some like keeping that to a minimum...
also if iLife is installed including GarageBand - there might be some GB of
'garageband loops' you might not need.
so, all in all, how much you might be able to clean up depends on how
you want to use your machine... post back w/ any details if you like...
Thanks again for all your help. I will have more
questions for you
P/S: I couldn't find these info by search.
enjoy your new machine!!! cheers

How to check the usage of ram and cpu Performance for the particular application like sqlserver ,ms word

how to check the usage of ram and cpu Performance for the particular application like sqlserver ,ms word
ranki

Hi,
You can use Performance Monitor and add the required counters.
Check the below Technet article on Performance Monitor.
http://technet.microsoft.com/en-us/library/cc749249.aspx
Below are the steps to monitor the process in Performance Monitor.
- Go to the Performance Monitor.
- Right-click on the graph and select "Add Counters".
- In the "Available counters" list, open the "Process" section by clicking on the down arrow next to it. Select "% Processor Time" (and any other counter you want).
- In the "Instances of selected object" list, select the process you want to track. Then click on "Add >>" button. Click on OK.
Regards,
Jack
www.jijitechnologies.com

How to check for the prerequisite Support pack level

We are planning to upgrade from 4.7 to ECC6..How can check ,what is minimum support pack level that needs to be maintained in 4.7 for the upgrdade to ECC6.
Can i check this in Servrice markrt place .if so please let me know where to check
Thanks

Hello,
I am sure you will find relevant information in the link below.
https://websmp207.sap-ag.de/upgrade
Regards,
Manoj Chintawar

How can I check to support specific JSRs using standard API?

Hi all.
How can I check to support specific JSRs?
I'd like to know supporting of following JSRs on VM.
1. JSR-75 (FileSystem and PIM API)
2. JSR-120 (WMA)
3. JSR-135 (MMAPI)
4. JSR-211 (CHAPI)
5. JSR-184 (M3G)
and so on...
Thanks.
Message was edited by:
WhiteBear

Answer myself.
It was possible using System.getProperty().
In case of supporting a FileConnection,
Return value of System.getProperty("microedition.io.file.FileConnection.version")
should be "v1.0" or similar value.
Thanks.

How to check the memory and CPU usage on NPU

Hi expert ,
Could you tell me how to check the memory and cpu usage on NPU?
I think ASR1000 has this command (show platform hardware qfp active...) , but I coudn't find the same command on ASR9001.
I checked " show controllers np counters all" command, but I did not find it.
Platform: ASR9001
version: 4.3.2
NP: Tyhoon
Thanks,

Hi Kanako,
understand your question, but something like that doesnt exist for the trident/typhoon NPU's for the asr9k.
in fact cpu usage is not really applicable for parallel/serialized hardware forwarders, but mainly the KPI is here
the PPS it handles.
The max pps it can handle is dependent on feature set.
What you could do is measure the rates on the PARSE_FABRIC_RECEIVE count (packets received from fabric, so egress direction), PARSE_ENET_RECEIVE count (packets received from the interface to the fabric, so ingress) and the LOOPBACK count, that is packets that are recirculated for extra processing. The sum of these 3 gives an idea of the PPS rate the NPU is working on.
Memory consumption is something tricky also, there are many memories attached to the NPU, notably:
TCAM used for vlan matching, ACL and QOS matching
Search memory for L2 and L3 (shared on Trident, separated on Typhoon)
Frame memory for packet bufferin in QOS
Stats memory, for all kinds of counters of QOS maps, interface stats etc
their usage is rather dynamic also.
The few things you want to verify on these are:
- ACL usage (in terms of Tcam entries)
- MAC table size (2M max on typhoon)
- FIB size (4M max on typhoon)
frame memory is dependent on the buffering, which is a sum of all the packets instant queue length and size of all pmaps attached to interfaces served by the same NPU. there is no good overview as to how much you have available of that, but it has a rather significant size 1G or 2G depending on the TR or SE cards (typhoon specific).
regards
xander
Xander Thuijs CCIE #6775
Principal Engineer
ASR9000, CRS, NCS6000 & IOS-XR

How to check SSL/TLS Renegotiation Protocol Change?

Hi:
I am applying patch #12837860 (part of CPU jan 2012). The link below is the readme. I don't know how to check if I need SSL/TLS Renegotiation in step #8.
https://updates.oracle.com/Orion/Services/download?type=readme&aru=14106915#CHDECEJC
8.After patching, see My Oracle Support Note 1301699.1, How the SSL/TLS Renegotiation Protocol Change Affects Oracle HTTP Server for more information on using SSL with Oracle HTTP Server.
Would you please tell me how to check if I need and how to reset it? This is for EBS 12.1.3, DB 11.1.0.7, 10.1.2.3 and 10.1.34 on Linux.
Thank you for your help in advance.

Both. When you use the JSSE APIs you must explicitly initiate a rehandshake. Of course, if you are the responder and you receive a hello request or a client hello, you will respond to it. I'll have to think about if there is someway for the responder to reject a rehandshake attempt.

How to check number of rows processed in a package

i have a pakage wid at least 11 procedures which runs on running a report now user run the report and he told me that records are not fully processed records are less so how to check how many records are processed so i can conform the data
its urgent plzz any suggestion
thanks a lot

And here's some hints for you posting on the forum...
a) do not post in UPPER CASE unless you are highlighting a word or two. Typing everything in UPPER CASE, is considered shouting and is not polite.
b) do not say that your requirement is "urgent". Everyone here is a volunteer with their own jobs to do and your requirement is not "urgent" to them. Suggesting they drop everything to help you is poor netiquete and, again, quite rude. It also presumes that your issue is somehow more important than other people who have posted asking for assistance. Sure, everyone else would like their question answering as soon as possible, but they aren't so rude as to demand urgent attention, so neither should you.
c) Always tell us your database version. The answers you are given may vary depending on the capabilities of the database version you are using and if you don't specify a version, people will have to assume you are using the latest supported versions and the answers may not work for you if you have a less capable version, even if those answers are technically correct.
d) Always try and give an example of what you mean. Provide sample tables (create table statements) and sample data (insert statements), with example code or queries that you've tried (where relevant), showing what you expect to get as output and explaining any logic that is to get from the source to the output.
e) Post any code or data inside {noformat}{noformat} tags so that it retains formatting on the forum.

How to check the messages in solution manager?

hai experts !
how to check the messages in solution manager?
in which transaction do we see them?

Hi Kiran,
From what I gather from your brief question, you are perhaps looking for CRM_DNO_MONITOR that would display all queries created from Satellite/SolMan system itself, as support messages.
If you are looking for Notifications underlying those messages, please look for DNOTIFWL.
For more specific answers, please provide more description of what you are looking for.
Trust this helps.
Regards,
Srini

How to check the report builder version from the rdf file

Hi,
I have a rdf file but I don't the developer using which version of report builder to develop the rdf file. So, does anyone knows how to check the rdf file is developed by which version of report builder?
When I try to use the notepad to open the rdf file, it shows the string "ROS.60050". So, does it means that the rdf file is developed by Oracle report 6i?
Besides, do anyone knows if Oracle report 6i are still offer from Oralce (as I know, the latest verison of oracle report is 11g). So, in case Oralce not offer oracle 6i and I need to buy oracle report 11g, do u know it is compatiable or I need to do the migration from 6i to 11g?
Thanks!

Hi,
The ROS version you are seeing in the RDF file does not mean the version where that RDF was developed. I am not aware of a way to check this but something that may help is that when you try to open a RDF developed in a higher version
of Reports with a lower version of Reports builder the following warning will be displayed
Warning. Opening a report saved with a newer version of Reports Builder.
Functionality may be lost. Continue?
"You tried to open a report with a version of Reports Builder older than the version used to
create the report. If the report uses functionality unavailable in the older version, that
functionality will be eliminated from the report.
Regarding Oracle Developer 6i. This version is not supported any more. Regarding how to upgrade Reports 6i to 11g and what to have in mind during the upgrade please review the following documentation.
References
http://docs.oracle.com/cd/E24269_01/doc.11120/e24478/toc.htm
How To Migrate Forms and Reports From 6i and/or 9i To 11g? (Doc ID 1275515.1)
Hope it helps.
Regards, RZ

How to check if my Porsche Design P'9982 is brand new and how long I have warranty ?

How to check if my Porsche Design P'9982 is brand new and how long I have warranty ?
Chandy Boy

chandlar_27 wrote:
How to check if my Porsche Design P'9982 is brand new and how long I have warranty ?
Hi @chandlar_27! Welcome to the BlackBerry Support Community Forums!
Warranty? You have to conntact the place where you got it.
To know if it's not been used yet, Go to the Phone App> Swipe down from the top screen> Settings> Call Summary.
if the number there doesn't match your personal use since purchase, you will know it has been used before.
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

FM2-A75IA-E53 CPU supported list is missing

I read the subject about how to know the CPU supported by the Motherboards but in the case of FM2-A75IA-E53 motherboard there is no SUPPORT -> CPU SUPPORT in the product page.

I think (hope) they are revamping them because they are definatly missing.
Contact msi for this information for now.
>>How to contact MSI.<<

How to check Authentication or WI-FI wireless headset MW600

Hi, please assist me how to check authentication for the headset MW600

There is really no good way to check this either for me or by yourself. I think the best way to find out if it's a authentic MW600 is to have it checked by a repair tech, they should be able to see this. Check with your local support team where your can find your nearest repair center and give them a call.
http://www.sonyericsson.com/cws/corporate/common/contact/phonelist
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

How to check CPU support

Similar Messages

Maybe you are looking for