How to check disk I/O for zones?

Hi all,
Can I tell from the global zone which of my zones are heavy on disk I/O?
Thanks!

hi sonu,
Its depend on what's your OS where database reside ?
ardhian
http://sapbasis.wordpress.com

Similar Messages

How to check plan line items for plan cost at network activity level?

Dear all,
How to check plan line items for plan cost at network activity level? The plan cost is done in network activity in CJ20N.
I am not able to check using CJI4 or CJI9 report.
Kindly advise.
Thanks and regards,
Jessie

Hi Jess,
Have you checked the navigation part which is being displayed on left hand side of report S_ALR_87013565 and S_ALR_87013533.? There you have option to check transaction currency and object currency when you double click on it.
In case if it is not being displayed under navigation. Then you can bring them on from transaction code CJE2. For eg: Report group for S_ALR_87013533 is 12KST1C. Double click on it and it will open up to do changes in report layout and many more. There you also have options to bring on transaction currency too. Similarly, you can check for other report groups as well just by checking the report description.
But I am not sure if suits your requirements. Wait for other experts to comment on this.
Regards,
Amit

How to check a pdf uploaded for press in a website automatically ??

how to check a pdf uploaded for press in a website automatically ??
i am making a new website for a printer.. his client upload pdf online directly in his website, we want that in the case that the pdf is not
as the printer need it for printing , the site automaticly after checking the pdf profile uploaded open a window and write what is wrong with this pdf
and if possible fix what he can fix automaticly as pitstop software is doing offline.
PLEASE YOUR HELP
thank you in advance

Acrobat isn't available with a server license. You might like to look into PitStop Server.

How to check the Statistics generated for a table through DBMS_STATS.

Hi,
How to check the statistics generated for a Table through DBMS_STATS.GATHER_TABLE_STATS procedure ?
Please let me know.
Thanks !
Regards,
Rajasekhar

Rajasekhar wrote:
Hi,
How to check the statistics generated for a Table through DBMS_STATS.GATHER_TABLE_STATS procedure ?
Please let me know.
Thanks !
Regards,
Rajasekharquery ALL_TABLES

How to check the tran code for specific activity.

Hello friends ,
could you please let me know how to check the tran code for specific activity . AS in table , i can check , what transaction does what ? But now i need to check the transaction for specific activity .
E.g , For Administrator workbench , there is transcation like RSA1 .
thanks in advance
Regards

Hi,
try the TSTC table with SE16.
Hope it helps,
MG

How to check a XMLTYPE table for corrupted (not invalid!) XML records ??

Hello,
I'd like to get help on the following issue, please. I need to check the XML data in a number of tables with XMLTYPE data type. Some of the data is corrupted but in terms not that the XML format is wrong but there is no XML at all in the fields but just only, for example, control characters (no tags, no anything, just corrupted data).
So, I have made a PL/SQL procedure cursor to get all the tables from a list, and then another cursor inside to browse each table for corrupted records. But can you help me how to check this? Any of the XML functions like for example: XMLIsValid, isFragment(), getrootelement(), etc. return to me an Oracle error "ORA-31011 XML parsing failed" and the procedure gets stuck on the first found bad record. But I need to continue and check all of them. Is it possible to get the ORA-31011 error with EXCEPTION, write to a logging table the corrupted record ID, and then continue?
Here is my simple procedure:
CREATE OR REPLACE PROCEDURE CHECKXML (v_schema in VARCHAR2)
IS
     v_Message     VARCHAR2(254);
     sql_stmt1     VARCHAR2(1000);
     sql_stmt2     VARCHAR2(1000);
     c1           SYS_REFCURSOR;
     c2           SYS_REFCURSOR;
     cur_tab          varchar2(100);
     cur_appl     varchar2(100);
     cur_rec     varchar2(200);
     valid_flag     number;
     criteria     VARCHAR2(20);
     tab1          VARCHAR2(20);
     tab2          VARCHAR2(20);
BEGIN
     criteria := 'XMLTYPE';
     sql_stmt1 := 'select id, path from ' || v_schema || '.stubfiles where type=:bcriteria';
     open c1 for sql_stmt1 using criteria;
     loop
     begin
          fetch c1 into cur_tab, cur_appl;
          exit when c1%notfound;
               insert into system.log_table values (sysdate, v_schema, 'next table', 'id ' || cur_tab, 'appl ' || cur_appl, '');
          sql_stmt2 := 'select t.recid, t.xmlrecord.isFragment() from ' || v_schema || '.' || cur_tab || ' t';
          open c2 for sql_stmt2;
          loop
          begin
          fetch c2 into cur_rec, valid_flag;
               exit when c2%notfound;
               insert into system.log_table values (sysdate, v_Schema, 'next record', 'id ' || cur_tab, 'recid ' || cur_rec, 'valid ' || valid_flag);
               commit;
          EXCEPTION
               WHEN OTHERS THEN v_Message := sqlerrm;
               dbms_output.put_line('Error for ' || cur_tab);
               dbms_output.put_line('-' || v_Message);
               insert into system.log_table values (sysdate, cur_tab, 'id err' || c_Row.ID,'appl err' || c_Row.path, v_Message,'');
          end;
          end loop;
          close c2;
          commit;
     end;
     end loop;
     close c1;
     commit;
END CHECKXML;
Thanks in advance
Evgeni

Hi
Why do you use a GTT? Just keep your xml in memory...
HTH
Chris

How to check the Datasource name for Virtual cube

Hello Experts,
I have a report which is built on one multiproviider for which we are getting balance sheet data reporting on company code,enduser told us that he wanted to see the data on plant level...
The problem here is that I have checked the data flow for the multiprovider,It is showing as getting data from virtual cube.
So,from there It is not showing the datasource and infosource under it(under virtual cube)..so how can I check the datasource name for it,so that I can go and enhance the datasource in case the plant(WERKS) is not there
thanks
reddy

Hi Friend,
go virtual cube lavel and see the data flow with "downward & upward" option in RSA1
Go to RSA1
Select the Virtual cube> right click > display data flow> select "downward & upward"
it may help you

How to check vendor schema group for info record for third party vendor

Hi Expert,
How to check vendor schema group that assigned in info record for third party vendor?
Thanks

Hi,
Vendor schema group is not assigned in info record, It is assigned in purchasing data view of vendor master ( Check in XK03 )
You can check in Vendor master- XK03- Purchasing data.
hope it will help u.
Deepak

How to check PSA data size for a particular datasource

Hi All,
Please let us know how to check the size of a PSA for a particular datasource in BI 7.0.
But i am using DB02OLD transaction code to identify the size of the change log table or active table of a DSO.

Hi,
I'm not sure but i think that with the tablename you can find the size in the DB02.
To know the PSA Tablename, double click on datasourse > go to > Tecnical attributes
There you have the name of the PSA Table.
Regards,
Dani

Reg- How to Check pending dispatch quantity for an order?

HI,
Pls guide me how to check the pending quantity to be dispatched for an order.
I Have explained herewith my requirement. A sales order is created for 10 quantities, out of which 6 are delivered. What is the path to check the balance 4 quantities. Also pls tell me the table in which, it gets recorded. I checked in VL04, but pending quantities were not displayed.
Thanks in advance
Sivarajesh. J

Hi siva
I can suggest an alternative,
u can get values of delivered qty from table RV45A-VSMNG.
ANd deduct it from Target Qty VBAP-KWMENG to get pending dispatch qty.
u can get this in Order transaction at schedule line level.
Kind regards
Mandar

How To Check Disk For Failures

It's more of a two part question.
1. Is there a way to check and see if either of my two internal SATA drives are failing?
2. How can I check and see if either disks have filesystem failures?
[root@ghost ~]# fdisk -l
Disk /dev/sdb: 250.1 GB, 250058268160 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488395055 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0005b294
Device Boot Start End Blocks Id System
/dev/sdb1 63 488395054 244197496 83 Linux
Disk /dev/sda: 250.1 GB, 250058268160 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488395055 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00048e7c
Device Boot Start End Blocks Id System
/dev/sda1 63 8000369 4000153+ 82 Linux swap / Solaris
/dev/sda2 * 8000370 8385929 192780 83 Linux
/dev/sda3 8385930 488395054 240004562+ 83 Linux
One or both drives are becoming more noticeably noisy. Thanks for any info / help!

Try gsmartcontrol, it's a graphical frontend to smartmontools, which in turn display the SMART status of your hard drives.
https://en.wikipedia.org/wiki/S.M.A.R.T.
Post the log here, if you can't understand the values.

How to check data after mapping for BPM if the mapping done outside BPM ?

Hi.
I have simple scenario BPM. Proxy -
> JDBC. I have 1 message mapping in between PROXY and JDBC.
and i have put the mapping outside the BPM (i didn' use transformation step). In case error happen. how i can see the data after the mapping ? i am always got difficulty to check the data if i have mapping outside bpm.
Thank you
Fernand

Hi
In case error happen. how i can see the data after the mapping ?
You have used mapping in interface determination of corresponding receiver determination. In transaction SXMB_MONI, open message corresponding to that receiver determination. There in left hand side you will see IS pipeline steps. There if you want to see message payload that is input to Mapping than see payload of any pipeline step before Request Message Mapping and test it in Design. If mapping fails you can see trace of the same step.
Request Message Mapping ---> SOAP Header ---> Trace
There you can see where your mapping failed.
And as rohit replied you can also get message from RWB.
For further clarification revert back to us.
Regards
Sami
Reward points if helpful.

How increase external disk size used for an existing file system, Solaris10

Configuration:
Server: Sun T5220
S/O: Solaris 10 5/08 s10s_u5wos_10 SPARC
Storage: EMC AX4-5
EMC PowerPath: PowerPath Version 5.2
I have the following scenario:
In AX4-5 storage array, I created two LUNs into RAID Group 10, with Raid Type1/0:
LUN 101: 20Gb
LUN 102: 10Gb
Both LUNs were added to Storage Group (SG1) that includes two Servers (Server1 and Server2); both servers have Operating System Solaris 10 5/8 and Power Path.
The servers detect both LUNs across two paths. With Power Path were created a virtual path (emcpower0a, emcpower1a) to access to each LUNs respectively.
We have mounted two file system /home/tes1 over emcpower0a -> LUN101 and /home/tes2 over emcpower1a -> LUN102.
Filesystem size used avail capacity Mounted on
/dev/dsk/emcpower0a 20G 919M 19G 5% /home/test1
/dev/dsk/emcpower1a 10G 9G 1G 90% /home/test2
I want to increase the space in file system /home/test2, without lost the information that I have stored and using the same LUN, LUN 102. To do this I start with the following steps:
1- Create new LUN, LUN 103 with 15Gb into RAID Group 10. Result: OK, I have available space in RAID Group 10.
2- Add LUN 103 to LUN 102, using concatenation option. Result: OK. This action creates a new metaLUN with the same characteristics of LUN 102, but with new space of 25Gb.
After to do these actions, I want to know how Solaris recognize this new space. What I need to do, to increase the size of file system /home/test2 to 25 Gb. Is that possible?
I reviewed the description of each disk using format command, and the disks not have any change.
Could anyone help me? If you need more detail, please do not hesitate to contact me.
Thanks in advance.

Robert, thank a lot for your know how. You helped me to clarify some doubts. To complete your answer, I will add two more details, based on my experience.
After to execute, type -> auto configure and label, the disk was created with different partitions like root, swap, usr, like this:
Volume name = < >
ascii name = <DGC-RAID10-0223 cyl 49150 alt 2 hd 32 sec 12>
pcyl = 49152
ncyl = 49150
acyl = 2
nhead = 32
nsect = 12
Part Tag Flag Cylinders Size Blocks
0 root wm 0 - 682 128.06MB (683/0/0) 262272
1 swap wu 683 - 1365 128.06MB (683/0/0) 262272
2 backup wu 0 - 49149 9.00GB (49150/0/0) 18873600
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 usr wm 1366 - 49149 8.75GB (47784/0/0) 18349056
7 unassigned wm 0 0 (0/0/0) 0
This was not convenient because all information stored appear in the first slice and growfs not work if appear root or swap slice into the disk, for that reason was necesary to recreate manually every slice with partition command. The final result was this:
Part Tag Flag Cylinders Size Blocks
0 unassigned wm 0 - 49149 9.00GB (49150/0/0) 18873600
1 unassigned wu 0 0 (0/0/0) 0
2 backup wu 0 - 49149 9.00GB (49150/0/0) 18873600
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
Now, execute again the label command to save the new information.
Mount file system and execute:
growfs M file_system mount_point to expand the file system to 9Gb.

XML validation: how to check ALL validation problem for XHTML

I have a lot of documents in HTML format (not very good) that I would like to convert in XML (XHTML). I know it is not so easy and I would use this strategy in a Java program:
1. Try to check the well-formness and validation with a XML parser (SAX or Xerces)
2. If not valid: try to individuate ALL the problems the file has (*and not only the first one that halts the processing process*)
3. Try to transform the HTML to a validable XHTML with some approach: regular expression or other methods
So the questions I do to you are the following:
1. What XML parser do you think is the best for this purposes? SAX or Xerces?
2. How can I understand what are all the validation problems in the file and not only the first one (If I remember well XML parsers halt the parsing process at the first error...)?
3. How can I transform the HTML to a valid XHTML? I have only to use RegEx or is there other tools to do this for XHTML and HTML problem?
Thanks
r
Edited by: robertobat on Feb 21, 2009 7:09 PM

>
1. Neither of them. (Disregarding the fact that SAX and Xerces aren't in the same category and don't cover all the possibilities.I would say SAX default implementation in JRE and SAX parser in Xerces.
2. I think you have "valid" and "well-formed" confused. And HTML isn't a dialect of XML so the idea of trying to use an XML parser to handle HTML isn't a good idea.I know very well what is the difference between valid and well-formed but I've used "validation" to represent all the conversion problem. But you are right. I'm convincing myself that using a XML parser as the first step is not a good idea.
3. Well, this is the real question, isn't it? Those other two were just a waste. Don't screw about with regex, for one thing it doesn't work well for hierarchical structures and for another you won't finish in a finite time. Just use an HTML parser which can produce a DOM, like TagSoup for example. Or run them through HTMLTidy. You could also submit them to one of the internet sites which will validate XHTML for you.I've seen Tidy and its capability to convert an HTML to a XHTML and I think it is better then TagSoup because I have to implement this mechanism in a production environment and I want to use only open source projects that have a very long story and that are strong. But I'll see TagSoup as you say.
I cannot use an Internet service to convert millions of private documents.

How to check the processed data for archieved messages in sap pi

Dear all,
1. which tables in sap pi stores the data processed in PI
2. where will we find the archived messages (DATA but not LOGS)
3. As table size increases rapidl, how to schedule a background job to delete the table entries which were older than 30 days
Regards
Sushant

Dear Sushanth,
Welcome to scn,
For all your query, check "SARA" tcode for answer. In standard, We have pre defined archiving objects (Usually names starts inital 2 letters of module and main table or process like PR_Order).
There are different tabs available (check screen below) in SARA, Explore each for more information.
For tables/object identification - use "Database tables" Tab (tcode DB15).
For Archived data, check "Spool" (green icon beside logs)
There is option to schedule tasks in Preproc, Write and Delete tabs.
Hope it helps.
reg,
Bhg

How to check disk I/O for zones?

Similar Messages

Maybe you are looking for