How to check HTTP response code

Hi,
we have the following scenario:
HTTP -> PI -> HTTP
So it's easy to use HTTP or SOAP-adapter here.
But we have to inform the sender of the message immediately about the successfull delivered message.
So we have to check if response code 200 was sent from the receiver of the message and inform the sender about this.
I can't find any possibility how I can check this in PI 7.1 (neither by using HTTP adapter nor by using SOAP-adapter). There is no acknowledgement mechanism (I can't find any).
Does anybody know how we can solve this?
Thanks for your replies.
Regards
Thorsten

If the response has to travel from Receiver to Sender then you have to make use of SYNC mode of processing or use a BPM.
In Async flow the Sender will get a HTTP 200 OK response from the sender adapter of SAP XI/ PI.
Regards,
Abhishek.

Similar Messages

Check standard HTTP response code for 301

Hello, EveryBody, I have an error when i deployment a sao project ,
[11:26:11 AM] Deploying profile...
[11:26:11 AM] Wrote SAR file to C:\JDeveloper\mywork\weichaiESBApplication\WCPumaReceiveProject\deploy\sca_WCPumaReceiveProject_rev1.0.jar
[11:26:11 AM] Deploying sca_WCPumaReceiveProject_rev1.0.jar to AdminServer [crmserver:7001]
[11:26:11 AM] Processing sar=/C:/JDeveloper/mywork/weichaiESBApplication/WCPumaReceiveProject/deploy/sca_WCPumaReceiveProject_rev1.0.jar
[11:26:11 AM] Adding sar file - C:\JDeveloper\mywork\weichaiESBApplication\WCPumaReceiveProject\deploy\sca_WCPumaReceiveProject_rev1.0.jar
[11:26:11 AM] Preparing to send HTTP request for deployment
[11:26:11 AM] Creating HTTP connection to host:crmserver, port:7001
[11:26:11 AM] Sending internal deployment descriptor
[11:26:11 AM] Sending archive - sca_WCPumaReceiveProject_rev1.0.jar
[11:26:11 AM] Received HTTP response from the server, response code=301
[11:26:11 AM] Problem in sending HTTP request to the server. Check standard HTTP response code for 301
[11:26:11 AM] Error deploying archive sca_WCPumaReceiveProject_rev1.0.jar to AdminServer [crmserver:7001]
[11:26:11 AM] HTTP error code returned [301]
[11:26:11 AM] No error message is returned from the server.
[11:26:11 AM] #### Deployment incomplete. ####
[11:26:11 AM] Error deploying archive file:/C:/JDeveloper/mywork/weichaiESBApplication/WCPumaReceiveProject/deploy/sca_WCPumaReceiveProject_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
I user soa version 11.1.1, jdevelop 11.1.1, everybody who tell the answer,
thank you very much!

I try http://fujiulnsd3t:8001/soa-infra and get the following information.
===========================================================================
Welcome to the Oracle SOA Platform on WebLogic
SOA Version: v11.1.1.2.0 - 11.1.1.2.0_091103.1205.1216 built on Tue Nov 03 13:48:58 PST 2009
WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 (10.3.2.0)
There are no composites deployed to the platform

Windows Azure Pack - Server returned HTTP response code: 500 error while accessing the public tenant API

Hi,
We are facing the following error while trying to access the given Windows Azure Pack Public tenant API to query the virtual machines list along with network adaper details -
java.io.IOException: Server returned HTTP response code: 500 for URL: https://<hostname>:30006/<subscription-id>/services/systemcenter/vmm/VirtualMachines?$expand=VirtualNetworkAdapters&$top=10000&$skip=0
The response is proper when we access the following URL -
https://<hostname>:30006/<subscription-id>/services/systemcenter/vmm/VirtualMachines
Only on adding the $expand=VirtualNetworkAdapters, url parameter we are getting the above error.
Where can we check for the error logs on the Azure Pack server ? We checked for the logs using Windows Event Viewer but did not find any for the public tenant API.
What should be the cause for such an error and how can we fix this to get the proper data?
Thanks in advance.

Yes, we tried this, $top=10&$skip=0 works for the following url
https://<hostname>:30006/<subscription-id>/services/systemcenter/vmm/VirtualMachines?$top=10&$skip=0
It is only when we add $expand=VirtualNetworkAdapters,
the server returns the mentioned error response -
URL for which the server returns the 500 error -
https://<hostname>:30006/<subscription-id>/services/systemcenter/vmm/VirtualMachines?$expand=VirtualNetworkAdapters&$top=10&$skip=0
Can
you point to the error logs for Windows Azure Pack and SPF ?

Outbound RFC to file: Received HTTP response code 500

hello:
i am doing outbound rfc from ecc to other system using PI and I get the below error in the PI.
I am on PI 7.0 and looked at the RFC destiantions in ECC and all look good.
The registered program in TCP/IP RFC destination was tested and looks fine .
I checked the SMICM in PI running at port 8000 and it looks file and also i checked the SXMB_ADM Interation configuration in PI which looks good too .
Even the PI integration engine is restarted . i am sure its in PI and I am hoping its related to user in PI -adapter frame work user XIAFUSER?
can you please let me know how to fix the below issue ..
"Transmitting the message to endpoint http://HGSGXI50:8000/sap/xi/engine?type=entry using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 500 : Internal Server Error"
thanks,

HI
for the error com.sap.aii.af.ra.ms.api.RecoverableException Received HTTP response code 500 Internal Server Error"
HTTP 500 can be any problem at receiver side. Are you sure, that the payload fits to the receiver requirements
Please refer this thread answered by Stefan Grube
Plain HTTP adapter error
check the similar thread HTTP server code 500 reason Internal Server Error

XML Form Build Error Unexpected http response code 500: Internal Server Err

Hi
I have the following error message when i am trying to load XML Form Builder
"Unexpected http response code 500: Internal Server Error "
When i am trying to Run the test its shows me the follwoing error log.
Test Environment: XML Forms Builder Environment Check *
Start Time: 2008-09-17 15:09:53                       *
End Time: 2008-09-17 15:09:59                         *
- Test: Java Environment
- OK
-      Start Time: 2008-09-17 15:09:53
-      End Time: 2008-09-17 15:09:53
-      Java Runtime Version is 1.6.0_02
- Test: Connection Tests
- ! Test Failed !
-      Start Time: 2008-09-17 15:09:53
-      End Time: 2008-09-17 15:09:59
-      A test in the suite failed
     - Test: Download XML Forms Builder Jar
     - OK
     -      Start Time: 2008-09-17 15:09:53
     -      End Time: 2008-09-17 15:09:55
     -      Successfully loaded XML Forms Builder Jar from http://zhmscad8.whirlpool.com:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/xmlforms/km.appl.xmlforms.xfbuilder_core.jar, Version 6.4.1
     - Test: Download SAP XML Toolkit Jar
     - OK
     -      Start Time: 2008-09-17 15:09:55
     -      End Time: 2008-09-17 15:09:59
     -      Successfully loaded SAP XML Toolkit Jar from http://zhmscad8.whirlpool.com:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/xmlforms/sapxmltoolkit.jar
     - Test: XML Forms Builder Version
     - ! Test Failed !
     -      Start Time: 2008-09-17 15:09:59
     -      End Time: 2008-09-17 15:09:59
     -      Unexpected http response code 500: Internal Server Error
     - Test: Load Global Settings
     - Not Started
     -      This test depends on the test "XML Forms Builder Version", which did not complete successfully
     - Test: Load Project List
     - Not Started
     -      This test depends on the test "XML Forms Builder Version", which did not complete successfully
Please let me know the how to slove this Problem.
Thanks
Mmukesh
Edited by: mmukesh reddy on Sep 17, 2008 9:29 PM

Hi Koti Reddy
That is not related to my issue.
Here this error only comming for two users in my group.
The environment every thing working for remaining user. But only that two users are facing the problem.
So please let me know is there any security issues.
Thanks
mmukesh

HTTP response code: 500 (Internal Server Error) when updating CMS

Hi all,
I'm using NWDI to develop a component.
After I have created Product and SC in SLD, I'm going to add SC into my Track. However the component doesn't appear in the list, even I have updated CMS.
Then I checked the CMS log file, it says
#1.5#00110915CACE0071000000190000185400042CDBD4231025#1175222575219#/Applications/CMS/PCS#sap.com/tcSLCMS~PCS#com.sap.cms.pcs.conf.manager.CmsConfManager#liuxiao#126#SAP J2EE Engine JTA Transaction : [1ffffffdf252200315]#shaw2k07_J2E_31401250#liuxiao#27a26201de6811db9d8c00110915cace#SAPEngine_Application_Thread[impl:3]_7##0#0#Error#1#com.sap.cms.pcs.conf.manager.CmsConfManager#Plain###Update CMS failed#
#1.5#00110915CACE00710000001C0000185400042CDBD4256832#1175222575375#/Applications/CMS#sap.com/tcwddispwda#com.sap.cms.ui.landconf.LandConfController#liuxiao#126##shaw2k07_J2E_31401250#liuxiao#27a26201de6811db9d8c00110915cace#SAPEngine_Application_Thread[impl:3]_7##0#0#Error#1#com.sap.cms.ui.landconf.LandConfController#Plain###CMSConfigurationException SLD (URL http://shaw2k07:50300) server exception: HTTP response code: 500 (Internal Server Error)#
How can I handle with this problem?
Thanks in advance.

Hi Pascal,
I have checked the SLD server log. When updating CMS failed, this log shows
#18 03/31/2007 22:17:21.273 [SAPEngine_Application_Thread[impl:3]_10] FATAL com.sap.lcr.cimsrv.CIMOMServlet: SLD initialization failure, can not set up cluster-wide event notification. Please check your JMS provider for errors. More...
#17 03/31/2007 22:17:21.273 [SAPEngine_Application_Thread[impl:3]_10] ERROR com.sap.lcr.cimsrv.ClusterNotificationListener: Failed to initialize cluster notification. Please check your JNDI service and JMS provider for errors. More...
#16 03/31/2007 22:17:21.226 [SAPEngine_Application_Thread[impl:3]_38] FATAL com.sap.lcr.cimsrv.CIMOMServlet: SLD initialization failure, can not set up cluster-wide event notification. Please check your JMS provider for errors. More...
#15 03/31/2007 22:17:21.210 [SAPEngine_Application_Thread[impl:3]_38] ERROR com.sap.lcr.cimsrv.ClusterNotificationListener: Failed to initialize cluster notification. Please check your JNDI service and JMS provider for errors. More...
and More says
#17 03/31/2007 22:17:21.273 [SAPEngine_Application_Thread[impl:3]_10] ERROR com.sap.lcr.cimsrv.ClusterNotificationListener: Failed to initialize cluster notification. Please check your JNDI service and JMS provider for errors.
Thrown:
javax.jms.JMSSecurityException: You do not have permissions: action consumer and instance SLDClusterNotificationTopic.
at com.sap.jms.protocol.notification.ServerExceptionResponse.getException(ServerExceptionResponse.java:231)
at com.sap.jms.client.session.Session.checkReceivedPacket(Session.java:2613)
at com.sap.jms.client.session.Session.createConsumer(Session.java:2172)
at com.sap.jms.client.session.TopicSession.createSubscriber(TopicSession.java:39)
at com.sap.lcr.cimsrv.ClusterNotificationListener.<init>(ClusterNotificationListener.java:141)
at com.sap.lcr.cimsrv.ClusterNotificationListener.start(ClusterNotificationListener.java:68)
at com.sap.lcr.cimsrv.CIMOMServlet.init(CIMOMServlet.java:106)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.getServlet(WebComponents.java:339)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:354)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
As for the
javax.jms.JMSSecurityException: You do not have permissions: action consumer and instance SLDClusterNotificationTopic.
I found information in this thread
SLD Connection failed
I'm quite sure that the user loggin into the SLD has the required role referred by "service.jms.default.authorization" "Security Role" "administrator". But it still doesn't work.
Btw when I restart the whole system the SLD server log also shows
FATAL com.sap.lcr.cimsrv.CIMOMServlet: SLD initialization failure, can not set up cluster-wide event notification. Please check your JMS provider for errors. More...
I just have no idea really...

HTTP Response code not ok

I am doing File to BAPI scenario. This is the error i am getting. Can you please tell how to followup
<b><SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>403</SAP:P1>
<SAP:P2>Forbidden</SAP:P2>
<SAP:P3 />
<SAP:P4 /></b>
Regards,
Govada.

Hi
Check if the client, userid, password, and lang information are maintained in SICF transaction -> sap/xi/engine. If not do maintain it
try to take a look to SAP Note:
803145 - Received HTTP response code 503
Can you check on the server proxy R3 system, make sure all the services are activated, SICF->sap->xi->engine
This Error - HTTP_RESP_STATUS_CODE_NOT_OK Might also occur because of authorization Check sm59 HTTP destination on R3 that points to the XI integration engine
check in this blog for http errors
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Message was edited by:
Anusha Ramsiva

Server returned HTTP response code: 401

hi,
I am trying to get the tutorial example to run but always fails at "ant install", with the following error code:
file:C:/jwstutorial12/examples/common/targets.xml:15: java.io.IOException: Server returned HTTP response code: 401 for U
RL: http://localhost:8080/manager/install?path=%2Fgs&war=file%3A%2Fjwstutorial12%2Fexamples%2Fgs%2Fbuild
THe only thing I can think of is that the build.properties file is not good. It should be in my "home" directory. What exactly is my home directory and how do I define it?
thanks,
lingling.

Double-check your password, keeping in mind that property files can override the properties defined in your ant file. Below the tomcat.properties overrides the username and password:
<property file="tomcat.properties"/>

<property name="url" value="http://localhost:8080/manager"/>
<property name="username" value="tomcat"/>
<property name="password" value="tomcat"/>

Getting HTTP response code: 404 Not Found while playback

Hi Folks,
Am creating a loadtest script on Oracle Empirica application by using web protocol with only 6 steps. While play back am getting the following error
Error Code:INVALID_HTTP_RESPONSE_CODE
Error Detail:
oracle.oats.scripting.modules.http.api.exceptions.ThinBrowserException: HTTP response code: 404 Not Found
     at oracle.oats.scripting.modules.http.api.exceptions.ThinBrowserException.createErrorInvalidHttpResponseCode(ThinBrowserException.java:66)
     at oracle.oats.scripting.modules.http.api.internal.ResponseCodeValidator.validate(ResponseCodeValidator.java:21)
     at oracle.oats.scripting.modules.http.api.internal.AbstractHTTPService.validate(AbstractHTTPService.java:993)
     at oracle.oats.scripting.modules.http.api.internal.AbstractHTTPService.navigate(AbstractHTTPService.java:595)
     at oracle.oats.scripting.modules.http.api.internal.AbstractHTTPService.doNavigate(AbstractHTTPService.java:504)
     at oracle.oats.scripting.modules.http.api.internal.AbstractHTTPService.doNavigate(AbstractHTTPService.java:494)
     at oracle.oats.scripting.modules.http.api.internal.InternalHTTPService.navigate(InternalHTTPService.java:1930)
     at oracle.oats.scripting.modules.http.api.internal.InternalHTTPService.navigate(InternalHTTPService.java:1867)
     at oracle.oats.scripting.modules.http.api.internal.InternalHTTPService.get(InternalHTTPService.java:1975)
     at oracle.oats.scripting.modules.http.api.internal.InternalHTTPService.get(InternalHTTPService.java:1966)
     at oracle.oats.scripting.modules.http.api.HTTPService.get(HTTPService.java:2426)
     at script.run(script.java:153)
     at oracle.oats.scripting.modules.basic.api.IteratingVUser.run(IteratingVUser.java:320)
     at oracle.oats.scripting.modules.basic.api.internal.IteratingAgent.run(IteratingAgent.java:726)
     at java.lang.Thread.run(Thread.java:619)
please help me to fix this issue.
Thanks,
Jay.

I have checked this link: /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
The SLD and the Integrationserver pipeline URL the Port was 50100 and the HTTP port in the RFC Dest. is 8001.
Witch port must entered in the URL, 50100 or 8001?
If the port must be 8001, how could i change the URL in the SLD? Must the business System Integrationserver be deleted and new entered witch the right URL?
Thank you for all answers.
regards
Jochen Schütze

HTTP response Code 404: Not Found

Hallo,
I want to get a Email from the account to my SAP-System.
The Email is downloaded in the XI-System and then directly the following error is shown.
"Fehler beim Übertragen zum Endpunkt /sap/xi/engine?type=entry über die Verbindung AFW. Grund: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found".
What could i do?
Thank you.
Jochen Schütze

I have checked this link: /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
The SLD and the Integrationserver pipeline URL the Port was 50100 and the HTTP port in the RFC Dest. is 8001.
Witch port must entered in the URL, 50100 or 8001?
If the port must be 8001, how could i change the URL in the SLD? Must the business System Integrationserver be deleted and new entered witch the right URL?
Thank you for all answers.
regards
Jochen Schütze

How to get the Response Code when a URL is launched from Web Dynpro

Hello Experts,
I have a Web Dynpro Application in which in one of its views i have an IFrame UI element in which i will show a resource stored somewhere ..
But before showing it i want to check if the resource actually exists. For this i have to check the HTTP Response code from Web Dynpro Application without setting it in the Iframe..
I am using the following code to get the Response Code:
try{
URL url = new URL("Some Url");
HttpURLConnection.setFollowRedirects(false);
HttpURLConnection connection = (HttpURLConnection) url.openConnection();
connection.connect();
wdComponentAPI.getMessageManager().reportSuccess("Response code ="+connection.getResponseCode());
}catch(Exception e){
wdComponentAPI.getMessageManager().reportSuccess("Exception");
Now the Problem is whatever response Code occurs 403 (for No Proper Authorization), 404 (for Resource not found) etc..
i always get Response Code= 500 (which is for Internal Server Error) shown in the messgae i have printed.
Please let me know the correct way of getting the Response Code from Web Dynpro.
Also my resource is lying on a SAP Portal 6.4
Best Regards
Sundeep
Edited by: Sundeep Sethi on Feb 18, 2008 9:07 AM
Edited by: Sundeep Sethi on Feb 18, 2008 10:23 AM

Hi,
Check this code from /thread/5242768 [original link is broken] if it works.
try{
URL myurl = new URL("http://calendar.google.com");
URLConnection connection = myurl.openConnection();
if(connection instanceof HttpURLConnection) {
HttpURLConnection httpConnection = (HttpURLConnection) connection;
HttpURLConnection.setFollowRedirects(true);
httpConnection.setRequestMethod("HEAD");
httpConnection.connect();
System.out.println("Response = "+httpConnection.getResponseCode());
catch(Exception e) {
// print exception
Regards,
Harini S

Deploying simple HTML page to WLS 10.3.6 fails with HTTP response code: 502

- I created a simple HTML page and want to test deployment to WLS 10.3.6 on Linux. I created WAR file and when using JDev 11.1.1.4.0 to deploy to WebLogic Server, it fails to deploy. Full errors/messages are:
[04:40:56 PM] ---- Deployment started. ----
[04:40:56 PM] Target platform is (Weblogic 10.3).
[04:40:59 PM] Retrieving existing application information
[04:40:59 PM] Running dependency analysis...
[04:40:59 PM] Building...
[04:40:59 PM] Deploying profile...
[04:40:59 PM] Wrote Web Application Module to C:\JDeveloper\mywork\Simpe_HTML\Project1\deploy\SimpleHTML.war
[04:41:01 PM] Deploying Application...
[04:41:01 PM] Weblogic Server Exception: weblogic.deploy.api.internal.utils.DeployerHelperException: The source 'C:\DOCUME~1\NGOLDR~1.LAT\LOCALS~1\Temp\SimpleHTML.war' for the application 'SimpleHTML' could not be loaded to the server 'http://dupe:7031/bea_wls_deployment_internal/DeploymentService'.
Server returned HTTP response code: 502 for URL: http://dupe:7031/bea_wls_deployment_internal/DeploymentService
[04:41:01 PM] See server logs or server console for more details.
[04:41:01 PM] weblogic.deploy.api.spi.exceptions.ServerConnectionException: [J2EE Deployment SPI:260041]Unable to upload 'C:\JDeveloper\mywork\Simpe_HTML\Project1\deploy\SimpleHTML.war' to 't3://dupe:7031'
[04:41:01 PM] #### Deployment incomplete. ####
[04:41:01 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
- The Application Server connection is accessible within JDev. 'dupe' is my server name and it's running RH 5.4
- Any help or suggestions appreciated, although I've already asked Mr. Google without success.
Thanks in advance,
Neville

HTTP response code 502 means temporarily overloaded.
I would say that we have to check the deployment error on the weblogic server logs located at <Domain_Home>\servers\dupe\logs\dupe.log
Check for any errors like OutOfMemory etc OR any deployment failures.
If possible, try accessing the console at http://dupe:7031/console
Check if you are able to successfully deploy your application using the console.
From the error it looks like the "dupe" server might not be healthy. So, the log file would really help here to get clues into the root cause.
Arun

HTTP Response code 404 - RFC Adapter des not connect to Integration engine

Hi,
I seem to have problem with XI Integration engine. My integration process does not go beyond adapter engine and it fails with the following error,
Begining of the erorr report -
2006-01-23 13:35:53 Success RFC adapter received sRFC for ZSCEN2_XI from <sysno>/<client>. Attempting to send message synchronously
2006-01-23 13:35:54 Success Application attempting to send an XI message synchronously using connection AFW.
2006-01-23 13:35:55 Success Trying to put the message into the call queue.
2006-01-23 13:35:55 Success Message successfully put into the queue.
2006-01-23 13:35:55 Success The message was successfully retrieved from the call queue.
2006-01-23 13:35:55 Success The message status set to DLNG.
2006-01-23 13:35:55 Error Returning synchronous error notification to calling application: Received HTTP response code 404 : Not Found.
2006-01-23 13:35:55 Error Transmitting the message using connection http://<host>:55300/sap/xi/engine?type=entry failed, due to: Received HTTP response code 404 : Not Found.
2006-01-23 13:35:55 Error The message status set to FAIL.
2006-01-23 13:35:55 Error Returning to application. Exception: Received HTTP response code 404 : Not Found
end of error report -
and the runtime workbench does not connect to Integration engine and fails with the following error,
begin error report -
javax.ejb.CreateException: Unable to log on to system XID in language en with user XIRWBUSER
     at com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean.ejbCreate(IntegrationEngineMonitoringBean.java:374)
     at com.sap.aii.mdt.server.IntegrationEngineHomeImpl10.create(IntegrationEngineHomeImpl10.java:185)
     at com.sap.aii.mdt.server.IntegrationEngineHome_Stub.create(IntegrationEngineHome_Stub.java:56)
end of report -
Have anyone experienced the same issue?. Are we missing some post installation configuration?.
Thanks in advance
Regards,
Arul

HI Anulraja,
Your Adapter Engine searches the pipeline url of the integration engine from the SLD.
Check the Bussiness System in Sld , which you'll have defined for XI Server.
It should have ROLE : Integration Server And
pipeline url: http://ux0800:55300/sap/xi/engine?type=entry
should be this if your http port is 55300.
Check if this url is right in SLD-Bussiness System.
You can check the exact http port in transaction sxmb_adm.
Go to Integration engine configuration and then click on check icon(F7).
It should match with that provided in the BS in SLD.
By default it should be 8000.
Check all these things and then try.
Regards,
Yomesh

Error Transmitting the message to endpoint -Received HTTP response code 401

Hello Experts,
I am having a SOAP to Proxy scenario. We are using HTTPS without client Authentication.
Everything is running fine and well set on DEV system. After transporting to Test system, i am getting error as :
Error Transmitting the message to endpoint http://host:port/sap/xi/engine?type=entry using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 401 : Unauthorized.
I get HTTP 200 Ok response in my soap client but the message is not reaching to Integration Engine. It is failing with above error. On CC monitoring for SOAP adapter it shows call completed successfully. But when I use the mesage ID from CC monitoring in Message monitoring i get the error as shown above in Audit log.
I have checked for Roles attached to my user on DEV and Test systems , I have same roles on both systems.
Any inputs to solve this problem will be very helpful to me. Let me know which service users i need to check for this issue?
Thanks in Advance,
XI Queries.

Hi Pinang,
Thanks for input.
1) Check Role -SAP_XI_APPL_SERV_USER is there in XIAPPLUSER or not.
->Done. Its Ok.
2) check tyour port entry is like J2EE port 5<System no> or not.
->Done. Its Ok.
3) If the error in Adapter Engine
then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
->This note refers in case it happens with high load. I am just sending a small request and no one else is using / testing this interface. So no high load.
4) Check password for user XIISUSER
-> Basis team said they checked for all Xi users and they are not locked.
5) Check password for user XIAFUSER
-> Basis team said they checked for all Xi users and they are not locked.
Any other hints will be helpful.
Kind Regards,
Xi Queries.

HTTP Response code 5000

hi all...
i'm working on file-to-file scenario....
the file is being picked but it is not being created in the destination directory.....
i tried checking with an xml document....its the same case with that as well....
when i checked in message monitoring..it says..
"Transmitting the message to endpoint http://sai:8000/sap/xi/engine/entry?action=execute using connection AFW failed, due to: Received HTTP response code 500.."
and it says "No Messages Available for Selection" in Tcode SXMB_MONI.....
I tried updating the cache contents also...but its of no use....
Anyone please provide a solution for this problem....
Thnx in advance..
Hari

Hi Hari,
check this Pipeline URL
http://<hostname>:<port>/sap/xi/engine?type=entry
and it not type=execute.
change this value in your SLD> Business system> <IntegrationServer> --> Pipeline URL
Hope this helps,
Regards,
Moorthy

How to check HTTP response code

Similar Messages

Maybe you are looking for