How to check my RAC private interconnect working properly?

All,
Is there any way to check whether my RAC private interconnect is working properly or not?
Thanks,
Mahi

Mahi wrote:
All,
Is there any way to check whether my RAC private interconnect is working properly or not?
Thanks,
MahiCVU verifies the connectivity between all of the nodes in the cluster through those interfaces.
$cluvfy comp nodecon -n all -verbose
http://docs.oracle.com/cd/E11882_01/rac.112/e16794/cvu.htm

Similar Messages

  • How can i get the speakers to work properly? they have a lot of static and scratchiness from them

    how can i get the speakers to work properly, they have a lot of static and scratchiness coming from them?

    I found my answer in this thread:
    https://discussions.apple.com/message/16646999#16646999

  • How do I get "Vanishing Point" to work properly on iMac Retina 5k

    How do I get "Vanishing Point" to work properly on iMac Retina 5k? When I "render grid to photoshop" the grid is not in right place and scale. I'm using latest version of CC.

    OMG! What a load of crap and thank you for posting this. I spent 3 solid hours to do something that I have done hundreds of times before, apply a Vanishing Point filter. I kept thinking I had some non-default setting on and was literally screaming at my new iMac. I NEVER thought it would be the cause. It was actually easier to reinstall CS5 on an older Mac and just do the stuff I needed. This is crazy. I fully get why Adobe doesn't support this yet but to not make a huge deal out of it so people know about it is just wrong. When I searched for Vanishing Point on the Forums, this thread showed almost the bottom of the first page. It should be stuck to the top until they fix it.

  • HT4528 I installed the new update and it is frozen with a picture of the charger head, an arrow pointing to a iTunes image. How do I get my phone to work properly?

    I installed the new update and it is frozen with a picture of the charger head, and an arrow pointing to a iTunes icon. How do I get my phone to work properly?

    What happened when you tried to restore and update the iPod?

  • RAC Private interconnect redundancy

    Hello All,
    We are designing (implementation will be done later) a 2-node RAC Database with GI having version 12.1.0.2 and RDBMS S/W having version 11.2.0.4. 
    We want to make private interconnect redundant but sysadmin does not have two same bandwidth channels, he is giving two NICs with 10Gbe (Giga bit Ethernet) and 1Gbe respectively.
    I got to know that 1 Gbe is sufficient for GES and GCS but will this architecture work fine means any harm in having 2 different bandwidth channels also in case of failure of 10Gbe interface definitely there will be performance degradation. 
    Thanks,
    Hemant.

    DO NOT use two different network bandwidths for your Cluster Interconnect. With two physical NICs, you will either resort to NIC bonding or HAIP, the latter being the recommendation from Oracle Corp since you are using 12c. In either case, both NIC's will be used equally. This means some traffic on the private network will be 'slower' than the other traffic. You do run the risk of having performance issues with this configuration.
    Also...there are two reasons for implementing multiple NICs for the Cluster Interconnect, performance and high availability. I've addressed performance above. On the HA side, dual NICs mean that if one channel goes down, the other channel is available and the cluster can stay operational. There is a law of the universe that says if you have 10gE on one side and 1gE on the other side, you have a 99% chance that if one channel goes down, it will be the 10gE one.   Which means you may not have enough bandwidth on the remaining channel.
    Cheers,
    Brian

  • How to check if the GPS Antenna works?!?!?

    Dear all,
    I've a "small" problem.
    As most of you have experienced I cannot fix the signal from the satellite.
    I tried everything...45°, open sky (I tried even in open sea!!!) etc...
    So my doubt is the following: how can I be sure that my antenna is working?
    Do you know if a SW to verify it exists????
    Do you know how to check it???
    If yes, pleaseeeeee tell me!!
    cheers
    MArco

    No - there's no software which can tell whether the GPS antenna is working or not. Within Maps v2 in the bottom right hand corner there is an indicator which will let you know once it has obtained a satellite lock - but not whether the actual hardware is working or not.
    Having said that I have never come across any instances where the GPS antenna has not worked on a phone. What phone do you have ?
    You should definitely have got a lock after 3 hours !
    It is definitely worth checking your settings. Make sure you quit Maps before doing this.
    Goto the menu, click Tools then Settings.
    Then click General and choose Positioning.
    Within here click Positioning methods.
    Ensure the options below are ticked :
    - Assisted GPS
    - Integrated GPS
    - Network based
    However please be aware that for Assisted GPS and network based, your network operators will charge you for any data transmitted.
    Then load Maps again and give it some time to get a lock.
    Please let me know how you get on.
    Regards,
    Edward

  • How to check whether Output ES is working or not.

    I am able to see Output ES in the services list of the admin console of my server. Please let me know how to check whether this is working or not.
    Regards,
    Shabeer

    LiveCycle ES2 (and LiveCycle ES) ship with three undersold and unadvertised web applications that are VERY useful. Each is referred to as an Installation Verification Sample (or IVS) but they are great testing tools you can use during development and QA. There is
    1) Assembler IVS,
    2) Forms IVS, and
    3) Output IVS
    Output IVS looks like this...
    The pattern for deploying and using all three IVSs is very similar as what I am about to describe for Output IVS. The following directions apply to the JBoss turnkey on Windows.
    1) go to C:\Adobe\Adobe LiveCycle ES2\deploy and locate adobe-output-ivs-jboss.ear
    2) copy adobe-output-ivs-jboss.ear to C:\Adobe\Adobe LiveCycle ES2\jboss\server\lc_turnkey\deploy
    3) if necessary, start LiveCycle
    4) open a browser and go to http://localhost:8080/OutputIVS/
    5) click Check/Change your preferences
    6) add Admin Credentials
    7) click Save
    8) click Test your form designs
    9) Select an .xdp from Form designs
    10) Click Use EJB (or Use Web Service if you feel so inclined) to invoke LiveCycle Output ES2
    Steve

  • Howto check my backup TAPE will work properly or not.

    Hi all,
      I am taking every day offline backup to my production server.
    now i want check my tape, in case of restore it will work properly or not.
    Thanks & Regards,
    Satish kumar-k

    Hi,
    A point to add.
    The Oracle DBVERIFY tool is available for both types of verify, that is, backup tape readability (but without a byte-by-byte comparison) and database block consistency.
    To perform a backup verification, start BRTOOLS or BRGUI and choose Backup
    and database copy → Verification of database backup and Backup and database
    copy → Verification of archivelog backup respectively. Select the backup to
    be verified from the list and select the type of verification in the option Use
    DBVERIFY (use_dbv):
    no means that only tape verification will be performed.
    yes means that tape verification is performed and database block
    consistency is checked.
    Hope this helps.
    Pl award suitably.
    Regards

  • How come duration in iPhoto does not work properly

    How come duration in iPhoto does not work properly

    Try select the Album in the Source Pane only, and not any of the pics in it.
    Regards
    TD

  • How will I know my i7 is working properly?

    I've seen a lot of threads on here where people have noticed problems upon receiving their new i5 and i7 iMacs. My question is for someone who is a relative novice with Apple and computers in general, how will I know if something's not working properly?
    I can obviously tell if something's wrong with the display, but is there a recommended way to test it out and make sure everything is running as it should?
    I ordered mine from apple.com on Dec 2, it should be arriving on Dec 21.
    Thank you.

    First welcome to Apple Discussions.
    You will know if it's working OK if you don't see anything wrong. There aren't any tests you need to run, just set it up following Apple's instructions and use it for a few days. If everything appears normal then it most likely is. Your iMac should be quiet and run smoothly, if it doesn't then you have 90 days of free telephone support and of course 1 year for the standard warranty. If you didn't already I would recommend getting AppleCare to protect your investment for up to 3 years from the original date of purchase.
    Last if you haven't already I would recommend going to these sites to learn more about your Mac especially if you are migrating from MS Windows.
    http://www.apple.com/support/mac101/
    http://www.apple.com/support/switch101/
    Regards,
    Roger

  • How can I get cursor keys to work properly in Excel under Mavericks?

    I recently upgraded from Snow Leopard to Mavericks on a 24" iMac, with  wired Apple USB keyboard and mouse. The cursor keys do not work properly in Excel 2011 - instead of navigating through the spreadsheet, they move the spreadsheet up, down, or sideways within the active window. Booting in safe mode did not help. All software is up to date. The cursor keys work as they should in other apps. I have also tried this with peripherals disconnected but that made no difference. Suggestions, anyone?

    Need more information. The drop down calendars are a custom JavaScript that has been developed by a number of different people and use many different methods so without which one and how you implemented it ion the form it hard to determine what is going on.

  • Oracle 10g RAC - Private Interconnect on Private non-routable VLAN

    In our data center there is an existing Oracle 10g RAC configured with private VLAN for Interconnect administered by a different group of DBAs.
    We are designing a new, separate Oracle 10g RAC environment to support our application.
    When we discussed with our data center folks to set up a private VLAN for our RAC Interconnect, they suggest to use the same existing Private VLAN used by other Oracle RAC configurations. In that case the Interconnect IPs will be on the same subnet as other Oracle RAC configurations.
    For example, if
    RAC1 with 2 nodes is using 192.168.1.1 and 192.168.1.2 in the VLAN_1 for the Interconect, they want us to use the same VLAN_1 with Interconnect IPs 192.168.1.3 and 192.168.1.4 for our 2 node RAC.
    Is Sharing same subnet on the same Private VLANs for interconnects of different RAC configurations supported?
    Will that cause any performance hit? That means the Interconnect IPs of One RAC configuration is pingable from other RAC configuration.
    Did anyone come across such a design?
    Could not find any info on this on Metalink.
    Thanks

    yes
    this is practically very much feasible.. as you would have only 4 m/c in ip subnet .... and this is very much less than the public subnet which we should refrain from using from interconnect.

  • How to check if my SuperDuper backup works?

    After reading that not all external HDDs guarantee the necessary compatibility with SL in case of total system recovery from an external backup, I would like to test mine. Is there a procedure around that explains how to do this check without putting the actual installation at risk?
    Thanks in advance

    I rarely restore from SD, but I do boot from it, and run disk repairs from there.
    I've been using SD a lot yesterday and now today, before during and after an OS update. Works great.
    Some people have had trouble with USB case; or where the partition table wasn't set to GUID when the drive was formatted; and, Ignore Ownership sometimes is still selected on an external (always good to check, and once clone is made first time, insure by running repair permissions; I'd also run Repair Disk with DU and Disk Warrior).
    As for testing restore, well, restore to a spare test drive if possible, harder to do if you only have one good port (and USB2 is way too slow, USB3 will be a huge performance boost). FW400/800 for now is preferable for a full restore.
    Once you make SD backup, then smart updates should only take 15 minutes or so; and a great alternative addition to your TimeMachine. Having a bootable backup is handy and only really needs to be done 'as needed' like before an update, and when the system is in good working order (never update when you are having trouble).
    I keep a small 30GB (could be less) Apple-only system on a partition on same drive as TimeMachine (1.5TB so room to slice out 30GB) so I can also boot from the drive. And 1.5TB has hit the magic $99. Room for a clone volume and another partition for T/M.

  • How to check if my fan is working ?

    After 30 minutes listening a dvd, my satellite A100-768 is getting slow and the CPU temperature (Speed fan) is around 86 degres... the fan does not start. If I blow into the extract system, DVD start again. How can I check my fan ??

    Hi
    Could you please explain what do you want to check on the fan???
    If there is something wrong, the notebook must be opened to check the hardware!
    But if you will do it by yourself, you will lose the warranty coverage.
    Therefore I dont recommend opening the notebook or removing any covers!!
    Contact the ASP and explain him the situation with the cooling modules

  • How to check my Skype number is working

    I set up a US skype number so someone from there could call me. I'm in Australia. I want to know if the numbers gonna ring when the person calls it. How do I do a test call? I called the number from my landline and nothing happened. HELP!!!!!!!!!!!

    Thanks for that. But:
    # cdrw -l
    Looking for CD devices...
    Seems to be that this command is hunging on this server.
    Moreover I can see that there are number of processes like:
    MAS01-1:/opt/config/log-> ps -ef |grep -i cdrw
    root 27885 24037 0 14:48:15 pts/20 0:00 cdrw -l
    root 10869 1 0 Sep 17 ? 0:00 cdrw -M
    root 5798 5576 0 Sep 14 ? 0:00 cdrw -M
    ainet 28790 17981 0 14:53:32 pts/13 0:00 grep -i cdrw
    root 17798 17689 0 Sep 04 ? 0:04 cdrw -M
    root 10882 1 0 Sep 14 ? 0:00 cdrw -M
    root 15428 1 0 Sep 14 ? 0:00 cdrw -b fast
    root 24357 24177 0 14:27:00 ? 0:00 cdrw -M
    root 16439 1 0 13:39:26 ? 0:00 cdrw -l
    But I can not kill any of them. Aanu idea what to do ?

Maybe you are looking for