How to Check source systems in RSA1 and verify that connections are working
How to Check source systems in RSA1 and verify that connections are working ok and how to Check Planning Area have green status.................
Hi,
In rsa1, go to 'Tools' and option 'Manage Source System' - the screens are self explanatory there after. To check the planning areas, go to transaction /SAPAPO/MSDP_ADMIN anc check the status of the relevant planning areas.
Regards
Vinod
Similar Messages
-
SAP Source System showing up as BI Source System in RSA1
I have 2 BW systems and 2 CRM Systems. In one BW system, when I create a SAP Source system in RSA1, It gets listed as a SAP Sources system along with ECC and all the rest.
The Logicial Systems and RFC Connections all appear to be the same between each pair.
In the other system, using identical procedure, it the source system gets listed as a BI Source System. The 2 CRM systems have identical components and version levels as do the 2 BW systems.
Any idea why and if this would make any difference and how to correct.Hi,
To fix this, you need to do a restore (& not a delete) of the source system in BW, having deleted the RSBASIDOC entry in the source OLTP system.
This will force the BW system to interrogate the RSBASIDOC table entry in the source system again and it should then realise that it is an R/3 system (not a BW system) and move the entry to the SAP folder.
Rgds,
Colum -
Error when creating SAP source-system in RSA1
hi,
we have a new bi-installation. the bi-system is running in the SAME system as our erp 2005-system is running.
the bi-client is 700, our source-system (FI/CO) client is 101. I want to create a source-system in RSA1. at the end i get the following error message:
<b>Name D01MAND700 of client 700 is not the same as the name D01MAND101 of the Warehouse
Message no. R3225
Diagnosis
In order to guarantee error-free communication between the source system and the SAP Business Information Warehouse, the logical system names must be known to both.
The system has established that the selected source system name D01MAND101 in the SAP Business Information Warehouse is not the same as the logical system name D01MAND700.
System Response
Processing has been terminated and all changes undone.
Procedure
Create the source system under the name D01MAND700 in the SAP Business Information Warehouse or change the logical system name for client 700 to D01MAND101 in the ALE customizing screen of the source system.
Note that the logical system name for client 700 may already be being used for other ALE scenarios. If this is the case you are not able to change the name.</b>
i don't understand this error ? is it because the BI-system and the erp-system is the SAME system ?
reg, Martinmr. kapadia,
there is one entry in table rsbasidoc, and it looks like that:
SLOGSYS D01MAND700
RLOGSYS D01MAND700
OBJSTAT ACT
BIDOCTYP ZSCA017
TSIDOC3X 0
TSPREFIX CA
SRCTYPE M
SAPREL 700
TSTPNM D78358
TIMESTMP 20.070.622.093.042
SBWBCRL 700
RBWBCRL 700
looks strange, right ? what should i do ? delete this entry ? how can i do this, it is a customizing table, i cant delete it via SE16 ?!?
reg, Martin -
Unable to Create Source system in RSA1
I have installed a BI Server(Netweaver 2004s). When i try to add source system in RSA1, it gives an error "No entry for BW_USER in table RSADMIN available"
Let me tell what all i tried.
1) i clicked on settings>global settings- it gives a blank page. when i switch it to change mode, there is a button called "Position" and then "Entry1 of 2". I cant enter any value there and when i click on "Position" button, it says "Table RSADMINAV has no relevant fields"
2) In se16 tried to maintain RSADMINA table and for BW User field, i gave BW_USER, but there is no "execute" Button. all i see is "Reset" button. i tried pressing F8 key, it wont do anything. I clicked on save but it says "the entry is already exist"
Regarding RFC - i created a user BW_USER in ERP Sytem and ERP_USER in BI server and both the user type are System user.
From both the server i tried to do Connection test and i am not getting any error. but if i try clicking Remote Connection, it wont connect and wont do anything and no Errors.
Please help me Resolving this Issue, Since it became a very critical issue.Hi,
Can you check if there is any other user ID specified in "BW user for ALE".
To check, Go to transaction RSA1 --> Settings --> Global Settings.
If you find a different user id there, then specify the correct BW user id there.
Please refer to OSS Note 410952 for details.
Hope this solves your problem!!
Regards,
Raj.
Edited by: Raj on Aug 14, 2009 8:15 PM
Edited by: Raj on Aug 14, 2009 8:16 PM -
Create Source System in APO and BW
Hi Gurus,
i want to create a Source System in APO it should be connected to BW.
is there any "HOW TO" documentation to do this?
thanks
YounesHi,
there are business content delivered datasources
0APO*, e.g 0APO_PPDS_ORDER_01
http://help.sap.com/saphelp_bw33/helpdata/en/56/22f93a000f7550e10000000a11402f/frameset.htm or generate datasource, check
Re: APO/BW: How to get back from APO to BW/ How the send data from BW to APO
http://help.sap.com/saphelp_scm50/helpdata/en/c9/199170f13711d4b2f20050da385632/frameset.htm http://help.sap.com/saphelp_scm50/helpdata/en/e0/9088392b385f6be10000000a11402f/frameset.htm 1. Generate an export DataSource for the planning area
2. Replicate the DataSource 3. In the Data Warehousing Workbench, you are still in the source system view. Right-click the source system and choose DataSources Overview in the context menu. 4. Assign an InfoSource to the DataSource 5. In the Data Warehousing Workbench, branch to the InfoSource view. 6. Right-click the InfoSource that you have just created and choose Change. We can genetrate data sources for Plan Book, which will be used to load data. Other Datasources use live cache for data. OSS notes DP-- 549184 SNP--428147 -
Source system in RSA1 is diiferent to the datasource in infoprovider
Dear Guru's
I have created a quality source system in RSA1 tcode for client 210 but in my infoprovider it shows me of diiferent datasource ie for client 200 and i need this client to be 210 so kindly help me to resolve this issue
Regards
MohammedHI,
Do you want to change all the assignments from client 200 to 210. Or is it for this particular Infoprovider (you have mentioned) and the relevant transformations.
Does
1) both clients exists as your source systems or
2) client 200 is to be replaced by client 210.
In the second scenario, you can refer this article. Contact your BASIS team for guidance.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/805eefcd-5428-2d10-c0ab-dc27a95b2c81
For scenario 1, if you want to load data from 210 client to this particular Infoprovider , replicate the datasource for client 210 in BI side and create new transformation, Infopackage and DTP from the datasource to the target.
Hope this helps.
Regards,
hari. -
How to create source system for flat file loads
How do I create a source system to load flat file?
I have a screen that asks for the following:
Logical system name
Source system name
Type and release
What should I enter for these?
I am not Basis and Basis was supposed to set this up.hi sam.
STEPS TO CREATE FLAT FILE SOURCE SYSTEM
step:1 select source systems under modeling in AWB.
step:2 select Source Systems root node.
|---> context menu
|--->create......
step:3 select your required source system Icon.
(in your case it is PC Icon).
there it askes for a logical.......and source system name...
here u can specify any name of ur wish
for example:-
logical sys name --- PC_FF
source system name --- flat file source system*
*press Continue * button.
Observe the activation icon to confirm the successfull creation(_glowing lamp icon_ symbol) -
How to craete Source system in BW from R/3 box
Hi,
I requested to basis to create source system in bw with R/3 Box.they were created RFC connection and told me to create source system in the BW .
Iam not sure how to create. please can any body help me in creating source system in BW with R/3 system.
Thanks in advance.Hi,
1. You have made the following settings in the SAP Customizing Implementation Guide (transaction SPRO) under SAP NetWeaver ® SAP Business Information Warehouse ® Links to Other Systems:
¡ General Connection Settings
¡ Links Between SAP Systems and BW
¡ Verify Workflow Customizing
2. You have made the following settings in the SAP Customizing Implementation Guide of the source system under the node SAP NetWeaver ® SAP Web Application Server ® IDoc Interface / Application Link Enabling (ALE) ® Basic Settings:
u2022 Logical Systems
- Define Logical System
- Assign Logical System to Client
u2022 Make basic settings for workflow (Perform Automatic Workflow Customizing)
The name you used for the source system (logical system) has to be used again when creating the source system in the SAP BW Administrator Workbench.
3. You have taken the server name from the source system under Tools ® Administration ® Monitor ® System Monitoring ® Server.It is displayed as follows:
Server_
pswdf090_IDF_90
4. As a rule, system changes are not ever permitted in productive systems. However, connecting a system (as a source system) to an SAP BW, or connecting an SAP BW to a new source system, will require changes to the system change options. Therefore you have made sure that the following changes are allowed in the relevant clients for the system, when connecting to the source system:
u2022 Cross-client Customizing and repository changes
In the SAP Customizing Implementation Guide under SAP NetWeaver ® SAP Business Information Warehouse ® Links to Other Systems ® General Connection Settings ® Assign Logical System to Client, select the relevant clients under Goto ® Details. In the Cross-Client Object Changes field, choose the Changes to Repository and Cross-Client Customizing Allowed option.
In the source system, make the following settings in the SAP Customizing Implementation Guide under SAP NetWeaver ® SAP Web Application Server ® IDoc Interface / Application Link Enabling (ALE) ® Basic Settings ® Cross-Application Components ® Distribution (ALE) ® Basic Settings ® Logical Systems ® Assign Logical System to Client.
u2022 Changes to the local developments and Business Information Warehouse software components
You use transaction SE03 (Transport Organizer Tools) to set the change options. Choose Transport Organizer Tools ® Administration ® Set System Change Option, then Execute. Make the following settings in the next screen.
u2022 Changes to the customer name range.
Again, you use transaction SE03 to set the change option for the customer name range.
u2022 Changes to BW namespaces /BIC/ and /BI0/
Again, you use transaction SE03 to set the change option for the BW namespaces.
Thanks,
Vinod
Edited by: Vinod on Nov 26, 2009 10:54 AM -
Permission problem when create source system between BI and R/3
Hi All,
I want to create a source system between BI7 and R/3 system
Both RFC connections have been created and tested succefully on the 2 systems
But when i create the source system on BI I have the message :
"Changes to Repository or cross-client customizing are not permitted"
Any idea ?
Thanks in advance for answers
SebastienHi All,
Thanks for your answer
The issue was solved when system is opened
Now my source system is created but I can't activate it !
When I try to activate I have 2 error messages in result :
RSAR 374 : The folowing errors occured in the source system
RSAR 375 : Result of the destination check: Timeout
There is no SAP help on these messages and for the moment I don't find thread about this on forum
Any idea ? -
How to check whether system privilege are granted
How to check whether system privileges like 'create session' and other ones are granted for user.
Is there any sys table where this information is available?
Regards - NeuronKeep in mind select * from dba_sys_privs where grantee = 'some-user' will give you a list of privileges granted to some-user directly. To get complete list of system privs granted to a user both directly an via roles use:
ACCEPT USER PROMPT 'Please enter user name: '
COLUMN PATH FORMAT A90
SET LINESIZE 132
SELECT PATH,
PRIVILEGE
FROM DBA_SYS_PRIVS,
SELECT 'DIRECT GRANT' PATH,
'&USER' GRANTED_ROLE
FROM DUAL
UNION ALL
SELECT LTRIM(SYS_CONNECT_BY_PATH(GRANTED_ROLE,'->'),'->') PATH,
GRANTED_ROLE
FROM DBA_ROLE_PRIVS
START WITH GRANTEE = UPPER('&USER')
CONNECT BY PRIOR GRANTED_ROLE = GRANTEE
WHERE GRANTEE = GRANTED_ROLE
/Now on top of privileges granted to a user, user also has privileges granted to PUBLIC. To get privileges user receives via PUBLIC run the above script specifying PUBLIC at the prompt.
SY. -
How i check the :SYSTEM.FORM_STATUS is DELETE OR REMOVE
hi master
SIR how i check my :SYSTEM.FORM_STATUS is DELETE OR REMOVE
please gide me idea
thanking you
aamirhello,
As the online documentation says, :SYSTEM.FORM_STATUS can take 3 different values:
CHANGED
NEW
QUERY
There is no status for a record that has just been removed. Only the PRE-DELETE, ON-DELETE and POST_DELETE triggers fire on this record.
Francois -
How to check in system(unix/windows) if it is mounted or not?
how to check in system(unix/windows) if it is mounted or not?
Hi Prasann,
how to check in system(unix/windows) if it is mounted or not?
Please elaborate your query.Meanwhile check with command df -Th
Regards,
Gaurav -
How to create Source System in BI 7.0
Hi Experts,
How to create Source System in BI 7.0, please urgent
ThanksHi Mark,
Did you see the help site below which is telling how to create a source system .If not please take a look at it.
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a61e5e07211d2acb80000e829fbfe/frameset.htm
Regards,
® -
how to check the usage of ram and cpu Performance for the particular application like sqlserver ,ms word
rankiHi,
You can use Performance Monitor and add the required counters.
Check the below Technet article on Performance Monitor.
http://technet.microsoft.com/en-us/library/cc749249.aspx
Below are the steps to monitor the process in Performance Monitor.
- Go to the Performance Monitor.
- Right-click on the graph and select "Add Counters".
- In the "Available counters" list, open the "Process" section by clicking on the down arrow next to it. Select "% Processor Time" (and any other counter you want).
- In the "Instances of selected object" list, select the process you want to track. Then click on "Add >>" button. Click on OK.
Regards,
Jack
www.jijitechnologies.com -
How to obtain source code of weka and enable to modify it
hello,
how to obtain source code of weka and enable to modify it such i want to extract code of some process that I makeHi ENG,
Since the issue regards to Weka. It is out of the support boundaries of our forum, I suggesT you post the question in the following forum:http://forums.pentaho.com/forumdisplay.php?81-Pentaho-Data-Mining-WEKA.
It is appropriate and more experts will assist you.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Maybe you are looking for
-
When I turn my computer on (Windows 7) I receive a message that Apple wants to make a change to the hardware. I click on yes but nothing happens. The change has something to do with Apple "push". I recently had a problem with"push" on iTunes when I t
-
VSphere 4 - Failed to load iommu driver
When I boot ESX 4 with the latest up on our UCS B class blades I get a: "Failed to load iommu driver" and when it finally finishes booting on the first screen I have message in red: cpu1 :4106)Mod: 2077: Initialization for vtd failed with -1" I alrea
-
Hello all, Probably silly and simple questions? 1) If my understanding is correct, a property filter hide/modify existing properties or add virtual properties...but, only temporarily right? i mean.. they are not changed permanently .. it's only for
-
E-mail duplicatio​ns
I upgraded to the new OS for my playbook and evertime I send a message with my work e-mail I get a duplicate message sent. After I press send the message goes to a red X and a top of the message it reads "there was an interruption in sending this mes
-
How to control MS excel from labiew ?
I'm using Labview 5.1 and i would like to Know if is possible to totally control MS excel from Labview: to write into a specific file of MS excel wich contain already some information.