How to check the current EHP stack level? in SAP
Dear All,
How to check the current EHP stack level? in SAP . i have checked forum before i am posting but still comfused .
same one said SAP_APPL , EA_Appl and SAP _HR is 60n if n=1.2.3.4. if n =1 is enhanced package 1 similarly 2,3,4 .
some one said SAP_BASIS 701,702,703,704 . according ehp1,2,3,4.
Pls check the details and confirm either is ehp1 or ehp4 .
Component version is simply shows SAP ECC 6.0 in system -> status.
Software Component - Release - SP level
SAP_ABA 701 0007
SAP_BASIS 701 0007
PI_BASIS 701 0007
ST-PI 2008_1_700 0003
SAP_BS_FND 701 0008
SAP_BW 701 0007
SAP_AP 700 0021
WEBCUIF 700 0008
SAP_APPL 604 0008
SAP_HR 604 0029
SAP_HRCAR 604 0029
SAP_HRCAT 604 0029
SAP_HRCAU 604 0029
SAP_HRCBE 604 0029
SAP_HRCBR 604 0029
SAP_HRCCA 604 0029
SAP_HRCCH 604 0029
SAP_HRCCL 604 0029
SAP_HRCCN 604 0029
SAP_HRCDE 604 0029
SAP_HRCDK 604 0029
SAP_HRCES 604 0029
SAP_HRCFI 604 0029
SAP_HRCFR 604 0029
SAP_HRCGB 604 0031
SAP_HRCHK 604 0029
SAP_HRCID 604 0029
SAP_HRCIE 604 0029
SAP_HRCIN 604 0029
SAP_HRCIT 604 0029
SAP_HRCJP 604 0029
SAP_HRCKR 604 0029
SAP_HRCMX 604 0029
SAP_HRCMY 604 0029
SAP_HRCNL 604 0029
SAP_HRCNO 604 0029
SAP_HRCNZ 604 0029
SAP_HRCPH 604 0029
SAP_HRCPT 604 0029
SAP_HRCRU 604 0029
SAP_HRCSE 604 0029
SAP_HRCSG 604 0029
SAP_HRCTH 604 0029
SAP_HRCTW 604 0029
SAP_HRCUN 604 0029
SAP_HRCUS 604 0029
SAP_HRCVE 604 0029
SAP_HRCZA 604 0029
SAP_HRGXX 604 0029
SAP_HRRXX 604 0029
EA-IPPE 400 0018
EA-APPL 604 0008
EA-DFPS 600 0018
EA-FINSERV 604 0007
EA-GLTRADE 604 0008
EA-HR 604 0029
EA-HRCAR 604 0029
EA-HRCAT 604 0029
EA-HRCAU 604 0029
EA-HRCBE 604 0029
EA-HRCBR 604 0029
EA-HRCCA 604 0029
EA-HRCCH 604 0029
EA-HRCCN 604 0029
EA-HRCDE 604 0029
EA-HRCDK 604 0029
EA-HRCES 604 0029
EA-HRCFI 604 0029
EA-HRCFR 604 0029
EA-HRCGB 604 0029
EA-HRCHK 604 0029
EA-HRCID 604 0029
EA-HRCIE 604 0029
EA-HRCIN 604 0029
EA-HRCIT 604 0029
EA-HRCJP 604 0029
EA-HRCKR 604 0029
EA-HRCMX 604 0029
EA-HRCMY 604 0029
EA-HRCNL 604 0029
EA-HRCNO 604 0029
EA-HRCNZ 604 0029
EA-HRCPH 604 0029
EA-HRCPT 604 0029
EA-HRCRU 604 0029
EA-HRCSE 604 0029
EA-HRCSG 604 0029
EA-HRCTH 604 0029
EA-HRCTW 604 0029
EA-HRCUN 604 0029
EA-HRCUS 604 0029
EA-HRCVE 604 0029
EA-HRCZA 604 0029
EA-HRGXX 604 0029
EA-HRRXX 604 0029
EA-PS 604 0007
EA-RETAIL 604 0007
FINBASIS 604 0008
ECC-DIMP 600 0018
ERECRUIT 604 0008
FI-CA 604 0008
FI-CAX 604 0007
INSURANCE 600 0018
IS-CWM 600 0018
IS-H 600 0024
IS-M 600 0018
IS-OIL 600 0018
IS-PS-CA 604 0007
IS-UT 600 0018
LSOFE 600 0018
SEM-BW 604 0008
ST-A/PI 01M_ECC600 0001
Regards
Edited by: satheesh0812 on Nov 17, 2011 7:57 AM
Hi Sateesh,
SAP_ABA 701 0007
SAP_BASIS 701 0007
PI_BASIS 701 0007
ST-PI 2008_1_700 0003
SAP_BS_FND 701 0008
SAP_BW 701 0007
SAP_AP 700 0021
WEBCUIF 700 0008
SAP_APPL 604 0008
Based on the component information provided by you, I can conclude that your system is ECC 6.0 EHP4.
EHP4 is derived from your component SAP_APPL 604.
In addition to this your EHP4 system has NW stack on NW 7.0 EHP1.
Hence your system is ECC 6.0 EHP4 with NW 7.0 EHP1.
Hope this answers your query.
Regards,
Deepak Kori
Similar Messages
-
How to check the current open period
Hello ABAP Gurus,
Could you help on how to check the current open period...
Sample would be
current date = may 1, 2009 but period for may is not yet open
so open would be april period
Thanks in advance....
Edited by: nanz ruiz on May 27, 2009 3:34 AMHi,
Check the fieldas FRYE2,FRPE2,TOYE2,TOPE2 of table T001B for a given varient.
Regards
Vishnu Gupta -
How can I check the current cost and budget in SAP?
Dear experts,
How can I check the current cost and budget in SAP for the PR approval?
Table:COEP, COBK, COSS COSP can not find below information:Tender_budget,Working_budget,reconciliation,Additional,Adjustment,variation
Best regards,
MerryDear expert,
I need below information:Project_id,Cost_code,Nature_code,Section_code,Work_type,Work_code,Cost_type,Suffix,item_desc,Tender_budget,Working_budget,reconciliation,Additional,Adjustment,variation
Can you tell me which table and filed can find them?
Many thanks.
best regards,
Merry -
How to check the current time with a Stored time in string format
Hi All
I would like to compare the system time with an existing time values which is allready there in String format..
i mean i would like to check if the SysTime is inbetween 6:30 and 14:00
I accomplished this in Oracle ..
Select 'Y' from dual where to_date(to_char(sysdate,'HH24:MI '),'HH24:MI') between to_date('06:30','HH24:MI') and to_date('14:00','HH24:MI')
But instead of checking the DB each and every time , the perfomance would be better if we can do this in our java code..
Could some one provide me with a code to accomplish the above scenario..
Thanks in advance..,.,import java.util.Calendar;
Calendar rightNow = Calendar.getInstance(); // gets the current date and time to millisec
Calendar earlyTime = Calendar.getInstance().set(Calendar.HOUR_OF_DAY, 6).set(Calendar.MINUTE, 30);
Calendar lateTime = Calendar.getInstance().set(Calendar.HOUR_OF_DAY, 8).set(Calendar.MINUTE, 0);
if (rightNow.compareTo(earlyTime)> 0 && rightNow.compareTo(lateTime) < 0){
// do something
}Try this. -
How to check the current networks on receiver with SHAREit?
1. Launch SHAREit and click Receive; 2. The page will change to "Waiting to receive", and click the "Friends cannot find you?" button; 3. The "Current networks" will pop up, as follows: .lan .EjrpN-........etc.
For the most part, sender can find receiver automatically. Under narrow cases, sender may need to join the same network as receiver.
-
How to check the access right for a specific SAP object like MaterialMaster
Hi!
How can I check if I have the right to change a specific object like a material or document in SAP vie RFC. I need a remote able function which tells me, if I have enough rights! Or, if such a function does not exist, how can I write my own ABAP code to do this?
Thanks,
KonradHi,
When initiating a transaction, a system program performs a series of checks to ensure the user is authorized.
1. The program checks whether the transaction code exists in table TSTC.
2. The program checks whether the transaction code is locked by the administrator (transaction code SM01).
3. The program checks whether the user has the authority to start the transaction. Authorization object S_TCODE (transaction start) contains the authorization field TCD (transaction code). The user must have the appropriate authorization for the transaction code to be started (for example, FK01, Create Vendor).
4. The program checks whether an authorization object is assigned to the transaction code. If this is the case, the program checks whether the user has an authorization for this authorization object. The transaction code/authorization object assignment is stored in table TSTCA.
Note: An SAP program controls steps 1 through 4. It displays an automatic message to the user if an authorization attempt fails in the step.
5. The system performs authorization checks in the ABAP program using the ABAP statement AUTHORITY-CHECK.
Regards
Sudheer -
How to check the number of contacts with segment level 'food and beverage' in the segment builder?
Do we have any table to check this.How to check the number of contacts with segment level 'food and beverage' in the segment builder?
Do we have any table to check this. -
Hello!
I'm trying to create a kind of a navigation tree for my application.
It should represent some elements of an XML structure and some other nodes for other options.
The binding with the context is not a problem, I can create the tree up to all the levels I want to.
The problem now is, that I don't know, how to get the "current tree element", when there is any action.
For example:
public void onActionSelect(...) {
String test = wdContext.currentTreeNodeElement().getText();
wdThis.wdGetContext().currentContextElement().setSelectedElement(test);
With this method I can get the text of the "first level nodes". If I want to get the "second level node", I can do
String test = wdContext.currentTreeNodeElement().currentChildElement.getText();
..and for the next levels so on.
Isn't there any general method to get the information of the selected element without knowing before, whether it is a nodeElement or a nodeElement.currentChildElement or a nodeElement.currentChildElement.currentChildElement, ...?
Greetings,
RamóHi,
if you following that pdf ,
i think your not implemented the below code in DomodifyView method
if (firstTime) {
IWDTreeNodeType treeNode = (IWDTreeNodeType) view.getElement("TheNode");
/* The following line is necessary to create parameter mapping from parameter "path" to parameter "selectedElement".
Parameter "path" is of type string and contains the string representation of the tree element (its corresponding context element to be exact)
that raised the onAction event. Parameter "selectedElement" is of type IWDNodeElement (or extends it) and is defined as parameter in the event handler
that handles the onAction. The parameter mapping defined here translates the String "path" into the corresponding context element that then can
be accessed within the event handler
treeNode.mappingOfOnAction().addSourceMapping("path", "selectedElement");
/* The following line is necessary to create parameter mapping from parameter "path" to parameter "element".
Parameter "path" is of type string and contains the string representation of the tree element (its corresponding context element to be exact)
that raised the onLoadChildren event. Parameter "element" is of type IWDNodeElement (or extends it) and is defined as parameter in the event handler
that handles the onLoadChildren. The parameter mapping defined here translates the String "path" into the corresponding context element that then can
be accessed within the event handler
treeNode.mappingOfOnLoadChildren().addSourceMapping("path", "element");
please cross check once.
Thanks,
Ramesh -
How to know the current patch or version of 11g
How to know the current version of the 11g with patch info?
Check this
http://obi9.blogspot.com/2012/11/determining-current-patch-levels.html
If helps pls mark -
How to check the verity version in our PeopleSoft Installation?
How to check the verity version in our PeopleSoft Installation? I am not sure if the verity is installed or not and also if installed what is the version?
yes. it says the version is 5.0.1
Is there any difference in installation or configuration when the app and web server are in same machine and when the app and web server are installed in different servers?
============================================
D:\fs840\webserv\peoplesoft>mkvdk
mkvdk - Verity, Inc. Version 5.0.1 (_nti40, Jul 23 2004)
Usage: mkvdk [<option>...] <filespec>...
Where <option> can be a VDK switch, or any of:
-about Show the collection's about resources
-autodel Delete bulk insert file when no longer needed
-backup <dir> Specify collection backup location
-bulk Submit bulk insert file(s)
-charmap <name> Specify the character map to VDK
-collection <path> Specify the collection (required)
-create Create the collection
-credentials <user> Specify user[:passwd][:domain][:mailbox]
-datapath <path> Specify VDK datapath
-datefmt <fmt> Specify date format to VDK
-debug Enable debugging output
-delete Delete documents
-description <desc> Set the collection's description
-diskcache <num> Set VDK's disk cache size (kbytes)
-extract Extract field values from text
-help Print this usage information
-insert Insert documents (default)
-locale <locale> Specify the locale to VDK
-logfile <file> Save output in a log file
-loglevel <num> Set the VDK output level for the log
-mailboxes This option is depracated. Use the credentials option inste
ad
-maxfiles <num> Set VDK's maximum number of open files
-maxmemory <num> Set VDK's maximum memory usage (kbytes)
-mode <mode> Set the indexing mode
-modify Modify fields using field/value pairs from a bulkfile
-nohousekeep Disable housekeeping
-noindex Disable indexing
-nolock Turns off locking (dangerous)
-nooptimize Disable optimizations
-nosave Don't save collection work list
-noservice Prevents servicing of submitted work
-nosubmit Don't submit work to VDK
-numdocs <num> Number of documents to insert from bulk insert file(s)
-numpages <num> Synonym for diskcache for backward compatibility
-offset <num> Specify offset into bulk insert file(s)
-online Flag for online Bulk Modify
-optimize <spec> Optimize the collection
-outlevel <num> Set the VDK output level
-persist Service the collection forever
-purge Remove all documents from collection
-purgeback Purge in the background
-purgewait <secs> Specify delay before purge
-quiet Suppress all non-error messages
-repair Repair the collection
-servlev <spec> Advanced option for overriding service level
-sleeptime <secs> Interval between service calls for persist
-style <dir> Specify style directory for create
-submit Synonym for noservice for backward compatibility
-synch Perform work synchronously
-topicset <path> Specify VDK topic set
-update Update documents
-vdkhome <path> Specify VDK home
-verbose Output more information
-words Build word assist list
-wordindex Build word assist index
The <spec> for -optimize is a hyphenated string of:
maxmerge Perform maximal merging of partitions
squeeze Recover space from deleted documents
vdbopt Build optimized VDB's
spanword Create word list spanning all partitions
ngramindex Create ngram index into spanning word list
maxclean Really clean (not for read-write)
readonly Make the collection read-only
tuneup Fully optimize for read-write use
publish Fully optimize for read-only use
The <spec> for -servlev is a hyphenated string of:
search Enable search and retrieval
insert Enable adding and updating documents
optimize Enable opportunistic collection optimization
assist Enable building of word list
housekeep Enable housekeeping of unneeded files
delete Enable document deletion
backup Enable backup
purge Enable background purging
repair Enable collection repair
dataprep Same as search-index-optimize-assist-housekeep
index Same as insert-delete
Error: must specify collection
mkvdk done
D:\fs840\webserv\peoplesoft> -
How will check the space taken by a single table in a tablespace ?
How will check the space taken by a single table in a tablespace ?
dba_segments is giving the same values even if I truncate the table?
Pls replyI need to know how can we find out the size of the table in the tablespace.use user_segments (bytes) column.
How much bytes it has taken ?value from user_segments, bytes column
If u delete records will the space be used for another table in same tablespace?No, it keep the space in the same table for future usage.
How can we free that space ?truncate or drop the table and reduce the size from tablespace, if you want to reclaim the space from the tablespace, OS level.
Jaffar -
How to get the current logical system?
Dear Abapers:
I can't find the logical system value from the table SYST, pls tell me how to get the current logical system name, Thanks!Hi,
Check with the table T000, the Logical system field name is LOGSYS.
Regards
Thiru -
How to get the current week from sysdate?
Hi sir,
i want to know how to get the current week from sysdate?
thanksHi Nicolas
It seems you like to check my post and also make commend ;) thanks for your attention
Have you ever read the posts above and given solutions ?Yes, I did
Have you read the docs ? Yes, I checked
What's the added value here ?Did youYou shared doc with solution(long one), I shared short one which point same solution(Check what Joel posted)..So what is benefit, As you can guess oracle docs are sometimes become so complicated as specialy for beginner...(At least it was like that for me and Belive me somedocs are still sooo complicated even for oracle coworkers ) But for you I dont know ;)
=> Why writting the PS in bold ?Why.. Let me think... Ohh Maybe I am looking some questions(many) and even user get answer they should not changed status so I am reading some posts and try to get problem and loosing time..
So I am putting that PS wiht BOLD because I dont wanna lose time my friend ;) Because While I am trying to help ppl here In same time I am trying to giving support to my customer prod systems. Which mean time is very important for me...
Hope my answer could satisfy you..
One important PS for you.. You may not like my posts (or someone) but my friend I become tired to read&answer and make commend to on your comment which is about my posts.
I am not newbie in forum(At least I fell like that) and I belive I know how I should make post..
Thank you
Regards
Helios -
How to get the current schema name
Hi,
Can anybody please tell me how to get the current schema name, there is some inbuilt function for this,but i am not getting that. Please help me.
Thanks
Jogeshok folks, I found the answer at Tom's as usual.
http://asktom.oracle.com/tkyte/who_called_me/index.html
I rewrote it into a function for kicks. just pass the results of DBMS_UTILITY.FORMAT_CALL_STACK to this function and you will get back the owner of the code making the call as well some extra goodies like the name of the code and the type of code depending on the parameter. This ignores the AUTHID CURRENT_USER issues which muddles the schemaid. Quick question, does the average user always have access to DBMS_UTILITY.FORMAT_CALL_STACK or does this get locked down on some systems?
cheers,
paul
create or replace
FUNCTION SELF_EXAM (
p_call_stack VARCHAR2,
p_type VARCHAR2 DEFAULT 'SCHEMA'
) RETURN VARCHAR2
AS
str_stack VARCHAR2(4000);
int_n PLS_INTEGER;
str_line VARCHAR2(255);
found_stack BOOLEAN DEFAULT FALSE;
int_cnt PLS_INTEGER := 0;
str_caller VARCHAR2(30);
str_name VARCHAR2(30);
str_owner VARCHAR2(30);
str_type VARCHAR2(30);
BEGIN
str_stack := p_call_stack;
-- Loop through each line of the call stack
LOOP
int_n := INSTR( str_stack, chr(10) );
EXIT WHEN int_cnt = 3 OR int_n IS NULL OR int_n = 0;
-- get the line
str_line := SUBSTR( str_stack, 1, int_n - 1 );
-- remove the line from the stack str
str_stack := substr( str_stack, int_n + 1 );
IF NOT found_stack
THEN
IF str_line like '%handle%number%name%'
THEN
found_stack := TRUE;
END IF;
ELSE
int_cnt := int_cnt + 1;
-- cnt = 1 is ME
-- cnt = 2 is MY Caller
-- cnt = 3 is Their Caller
IF int_cnt = 1
THEN
str_line := SUBSTR( str_line, 22 );
dbms_output.put_line('->' || str_line);
IF str_line LIKE 'pr%'
THEN
int_n := LENGTH('procedure ');
ELSIF str_line LIKE 'fun%'
THEN
int_n := LENGTH('function ');
ELSIF str_line LIKE 'package body%'
THEN
int_n := LENGTH('package body ');
ELSIF str_line LIKE 'pack%'
THEN
int_n := LENGTH('package ');
ELSIF str_line LIKE 'anonymous%'
THEN
int_n := LENGTH('anonymous block ');
ELSE
int_n := null;
END IF;
IF int_n IS NOT NULL
THEN
str_type := LTRIM(RTRIM(UPPER(SUBSTR( str_line, 1, int_n - 1 ))));
ELSE
str_type := 'TRIGGER';
END IF;
str_line := SUBSTR( str_line, NVL(int_n,1) );
int_n := INSTR( str_line, '.' );
str_owner := LTRIM(RTRIM(SUBSTR( str_line, 1, int_n - 1 )));
str_name := LTRIM(RTRIM(SUBSTR( str_line, int_n + 1 )));
END IF;
END IF;
END LOOP;
IF UPPER(p_type) = 'NAME'
THEN
RETURN str_name;
ELSIF UPPER(p_type) = 'SCHEMA.NAME'
OR UPPER(p_type) = 'OWNER.NAME'
THEN
RETURN str_owner || '.' || str_name;
ELSIF UPPER(p_type) = 'TYPE'
THEN
RETURN str_type;
ELSE
RETURN str_owner;
END IF;
END SELF_EXAM; -
How to Get the Current Workitem id at runtime
Hi All,
I have a scenario, where request pending with a user who has already resigned the organization. The requirement is that we need to provide a report
of the request and with whom it is pending with along with the workitem id with a forward push button.
So that if the user identifies that a request is pending with someone he can click the record and press for the forward button and a pop-up to be showed where he can enter the userid to whom he needs to forward it.
In this scenario can anyone tell me how to get the current workitem id at run time and to save it to a custom table.
I tried with method before workitem execution, but here i am not getting the current workitem id.
Can you please suggest a good solution for this.
Thanks and Regards,
BalajiKarri,
I think i can explain you with an example.
Here is my Scenario.
A user has raised a Gate pass and it went to all approval's and got approved and the material is also sent out from the plant. Lets take the date as 1.1.2013 (A Warehouse person have done the checking and sent out of the plant).
On 1.3.2013 some of the material has been returned and a material inward request has been raised and now the warehouse person has to do a inward checking and to sent it back for the initiator for the approval, but the warehouse person has resigned the organization on 1.2.2013, now the workitem is pending with the warehouse person who has already resigned.
My scenario is once the material inward request is created and before the workitem is delivered to the warehouse person i need to get the workitem id and to store the workitem some where.
So that in future if any warehouse dept head wants to forward the workitem which are lying in the person inbox who has already resigned he can do it via a report using this workitem id.
So, can anyone help how to get the dialog workitem id before the workitem creation or execution. I tried with "method before workitem execution" but my break point is not triggering at this point.
Thanks and Regards,
Balaji
Maybe you are looking for
-
I was chardged 100.00 on my itunes account and i cannot find out what the charge is for
help how can i find out why i was charged 100.00 on itunes
-
I have the same username and password for my Apple account and iCloud. My main email server is btinternet. When I try to share a photo by sending an email by iCloud I get a message "Server doesn't recognize username/password combination". Do I need t
-
Configuring Oracle 9i AS to use Java 1.4
Hi All, Please help me in configuring Oracle 9i Application Server Release 2 to use Java 1.4 Version instead of 1.3 version.
-
IPSec Spoof Detected error on VPN route
I'm trying to set up a new VPN user/group/policy to replace a flawed old version that used IP addresses from the same pool as the inside VLAN. As of right now I have most things configured but am unable to establish a connection to a service host on
-
External Procedure & ORA-03113
I have configured the database for external procedure: w/ the following: # TNSNAMES.ORA EXTPROC_CONNECTION_DATA = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = IPC)(Key = epsid)) (CONNECT_DATA = (SID = extproc0) # LISTENER.ORA EXTERNAL_PROCED