How to Check when the user is connected to different desktop.
How to Check when the user is connected to different desktop.Sometimes the user maynot see the theme in the personalize theme list. In that case the person must be using different kind of desktop.How to check, I need a path.And how to apply the theme to that user?
Thanks,
Paturi
Hi,
you can create the new portal desktop from
System Administration => Portal display => Desktop and Display Themes
Select your folder from Portal Content and from its context create new Desktop.
Add The Framework page and the theme to this desktop page.
Go to your folder from Portal Content and from the context of the framework page select add framework page to portal desktop.
Adding Theme to desktop
From Portal content select Theme folder and select the theme right click it and select Add theme to Portal Desktop.
Create rule for the Desktop.
Navigate to System Administration => Portal Display => Desktop and Display Themes Portal Content => Portal Administrators => Super Administrators =>main_rules.
Click Add IF Expression.
create the expression if user = xyz then click on apply
Select the then clause of the if and navigate to your folder where Desktop is created ,Add it and Click Apply.
Save the Changes to the rule.
Hope it helps you.
(reward points if its helpful)
Thanks,
Gunjan
Similar Messages
-
How to check if the user has only the display authority of a message
hi,
How to check if the user has only the display authority of a message but does not have the change authority for a certain message?
Best regards,hi blake
though i am an application consultant and for authorisation u need to have help of BASIS person if u r not the one but still i can guide u regarding the same,
Basically Authorization Management
Use
You can use the following authorization objects to control the authorizations for maintaining business partner data:
Authorization objects for the Business Partner:
 B_BUPA_GRP
 B_BUPA_ATT
 B_BUPA_FDG
 B_BUPA_RLT
Authorization objects for relationships:
 B_BUPR_BZT
 B_BUPR_FDG
In addition, you can assign an authorization group to a business partner in the dialog. The authorization group controls which users may maintain data for this business partner.
You can also define authorizations for fields and field groups using the Business Data Toolset (BDT). Depending on the settings you have made, the system carries out the relevant authorization checks.
In the dialog in the SAP GUI, you can display an overview of the authorizations assigned to you by pressing the button Settings.
For more information on authorization management, see the Implementation Guide (IMG) of the Business Partner, as well as in the Developers Handbook for the BDT under Authorizations.
IntegrationAuthorization management for the Business Partner forms part of the SAP authorization concept.
Prerequisites
You have made the necessary settings in Customizing of the Business Partner under Basic Settings--> -Address Management.
Moving over
AS ABAP Authorization Concept
The ABAP authorization concept protects transactions, programs, and services in SAP systems from unauthorized access. On the basis of the authorization concept, the administrator assigns authorizations to the users that determine which actions a user can execute in the SAP system, after he or she has logged on to the system and authenticated himself or herself.
To access business objects or execute SAP transactions, a user requires corresponding authorizations, as business objects or transactions are protected by authorization objects. The authorizations represent instances of generic authorization objects and are defined depending on the activity and responsibilities of the employee. The authorizations are combined in an authorization profile that is associated with a role. The user administrators then assign the corresponding roles using the user master record, so that the user can use the appropriate transactions for his or her tasks.
Authorization Checks
To ensure that a user has the appropriate authorizations when he or she performs an action, users are subject to authorization checks.
The following actions are subject to authorization checks that are performed before the start of a program or table maintenance and which the SAP applications cannot avoid:
Starting SAP transactions (authorization object S_TCODE)
Starting reports (authorization object S_PROGRAM)
Calling RFC function modules (authorization object S_RFC)
Table maintenance with generic tools (S_TABU_DIS)
Checking at Program Level with AUTHORITY-CHECK
Applications use the ABAP statement AUTHORITY-CHECK, which is inserted in the source code of the program, to check whether users have the appropriate authorization and whether these authorizations are suitably defined; that is, whether the user administrator has assigned the values required for the fields by the programmer. In this way, you can also protect transactions that are called indirectly by other programs.
AUTHORITY-CHECK searches profiles specified in the user master record to see whether the user has authorization for the authorization object specified in the AUTHORITY-CHECK. If one of the authorizations found matches the required values, the check is successful.
Starting SAP Transactions
When a user starts a transaction, the system performs the following checks:
The system checks in table TSTC whether the transaction code is valid and whether the system administrator has locked the transaction.
The system then checks whether the user has authorization to start the transaction.
The SAP system performs the authorization checks every time a user starts a transaction from the menu or by entering a command. Indirectly called transactions are not included in this authorization check. For more complex transactions, which call other transactions, there are additional authorization checks.
 The authorization object S_TCODE (transaction start) contains the field TCD (transaction code). The user must have an authorization with a value for the selected transaction code.
 If an additional authorization is entered using transaction SE93 for the transaction to be started, the user also requires the suitable defined authorization object (TSTA, table TSTCA).
If you create a transaction in transaction SE93, you can assign an additional authorization to this transaction. This is useful, if you want to be able to protect a transaction with a separate authorization. If this is not the case, you should consider using other methods to protect the transaction (such as AUTHORITY-CHECK at program level).
The system checks whether the transaction code is assigned an authorization object. If so, a check is made that the user has authorization for this authorization object.
The check is not performed in the following cases:
You have deactivated the check of the authorization objects for the transaction (with transaction SU24) using check indicators, that is, you have removed an authorization object entered using transaction SE93. You cannot deactivate the check for objects from the SAP NetWeaver and HR areas.
This can be useful, as a large number of authorization objects are often checked when transactions are executed, since the transaction calls other work areas in the background. In order for these checks to be executed successfully, the user in question must have the appropriate authorizations. This results in some users having more authorization than they strictly need. It also leads to an increased maintenance workload. You can therefore deactivate authorization checks of this type in a targeted manner using transaction SU24.
 You have globally deactivated authorization objects for all transactions with transaction SU24 or transaction SU25.
 So that the entries that you have made with transactions SU24 and SU25 become effective, you must set the profile parameter AUTH/NO_CHECK_IN_SOME_CASES to Y (using transaction RZ10).
All of the above checks must be successful so that the user can start the transaction. Otherwise, the transaction is not called and the system displays an appropriate message.
Starting Report Classes
You can perform additional authorization checks by assigning reports to authorization classes (using report RSCSAUTH). You can, for example, assign all PA* reports to an authorization class for PA (such as PAxxx). If a user wants to start a PA report, he or she requires the appropriate authorization to execute reports in this class.
We do not deliver any predefined report classes. You must decide yourself which reports you want to protect in this way. You can also enter the authorization classes for reports with the maintenance functions for report trees. This method provides a hierarchical approach for assigning authorizations for reports. You can, for example, assign an authorization class to a report node, meaning that all reports at this node automatically belong to this class. This means that you have a more transparent overview of the authorization classes to which the various reports are transported.
You must consider the following:
After you have assigned reports to authorization classes or have changed assignments, you may have to adjust objects in your authorization concept (such as roles (activity groups), profiles, or user master records).
There are certain system reports that you cannot assign to any authorization class. These include:
RSRZLLG0
STARTMEN (as of SAP R/3 4.0)
Reports that are called using SUBMIT in a customer exit at logon (such as SUSR0001, ZXUSRU01).
Authorization assignments for reports are overwritten during an upgrade. After an upgrade, you must therefore restore your customer-specific report authorizations.
Calling RFC Function Modules
When RFC function modules are called by an RFC client program or another system, an authorization check is performed for the authorization object S_RFC in the called system. This check uses the name of the function group to which the function module belongs. You can deactivate this check with parameter auth/rfc_authority_check.
Checking Assignment of Authorization Groups to Tables
You can also assign authorization groups to tables to avoid users accessing tables using general access tools (such as transaction SE16). A user requires not only authorization to execute the tool, but must also have authorization to be permitted to access tables with the relevant group assignments. For this case, we deliver tables with predefined assignments to authorization groups. The assignments are defined in table TDDAT; the checked authorization object is S_TABU_DIS.
You can assign a table to authorization group Z000. (Use transaction SM30 for table TDDAT) A user that wants to access this table must have authorization object S_TABU_DIS in his or her profile with the value Z000 in the field DICBERCLS (authorization group for ABAP Dictionary objects).
please See also:
SAP Notes 7642, 20534, 23342, 33154, and 67766
guess this info will help you,there is one graphic which actually explain the hierarchy of authorisation,i will find some time out to let u know more info about the authorisation
but if u sit with ur BASIS guy then u can learn lot of things in PFCG
i guess u r a basis guy,then its not a problem
best regards
ashish -
How to check if the user has log in when he log in again?
Hi all,
I was wondering how to track if the user has already log in?
When this user using browser A to log in then he try to log in using a new browser, then hw I am I going to know that, and terminate his session?Hello!
You can try this code if you want that if a user is login at a machine and tries to login from the other, then he can continue his processing at second machine ('cos it will get the high priority) but can not process from the first machine. This code allows to login but only second one will be active.
<jsp:useBean id="monitor1" scope="application" class="java.util.HashMap"/>
if(monitor1.containsKey(num)){
HttpSession oldSession = (HttpSession) monitor1.get(num);
oldSession.invalidate();
monitor1.remove(num);
monitor1.put(num , session);
But if you want to restrict it at the time of second login then u can use any of the techniques discussed above.
aNTUMNIHA -
How to check, when the Maintenance Order was deleted
Hello Experts,
Can you please tell me of how to check for the maintenance order that when it was deleted and who has deleted that.
If any T-Code is there or at the Table level also to check the requirement.
Regards,
Yawar KhanIf you want to track when you have put deletion flag, you can track it using above mentioned techniques.
If you archived (deleted) permanently, then using archival history only, you can check I guess.
Check these links. While deleting maintenance order, we can hisorical order with same number. Using that creation date, you can track.
http://help.sap.com/saphelp_nw04/helpdata/en/8d/3e6552462a11d189000000e8323d3a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8d/3e4d2f462a11d189000000e8323d3a/frameset.htm -
How to check ..the user who is currently logged in ..
... suppose i m logged in as HR schema ...so while using SLLplus * environment ...how to check ...that which use is currently logged in..
If you want to use the name in some program then you can use
select user into :variable from dual;
Regards
Kaustubh -
How to check whether the user has a certificate or not?
Hi everyone.
We're currently finishing a web project and the last step is to check whether users accessing the application have a valid certificate or not.
Users with a valid certificate can access all the data. Users without any certificate installed on their browsers may still proceed, but they won't be able to see all data. Please note that the lack of a certificate doesn't mean an error - it's just another use case.
Is there any way to check whether users have a certificate installed on their browsers?
Thanks in advance.
Edit: sorry, I forgot to post some tech details. We're using Struts 1.2 on a Tomcat 5 app server.
Message was edited by:
advacaI am not sure how Tomcat handles this, but you need to use two-way (mutual authentication) request but not enforce SSL between Tomcat and the client browser. This will make the browser prompt the user for the cert they want to send. Then you'll need to tackle the other part of your problem, getting the correct content displayed depending on whether the user sent a cert or not. I'm even less help there than I was on the first part of your question.
So, yeah - good luck with that
Lee -
Where to check whether the user is Admin or developer?
how to check whether the user is Admin or developer????? after he sign's in......I want to use role based login!!!!
Login into a workspace or login into an application?
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------- -
My COM add-in is developed using VS 2010 and VB. It's a shared COM add-in (not VSTO) and it works with Excel 2007 - 2013. My installer is signed with a code signing certificate but it would appear that my add-in's .dll should also be signed if the user has
checked the "Require application add-ins to be signed by a trusted publisher" option.
The "Sign the assembly" option is checked in my add-in's VB -> My Project -> Signing. I have a .snk file selected which I seem to recall generating 6 or 7 years ago when I ported the COM add-in from VB6 to .NET.
I have an up-to-date Comodo code signing certificate (a pfx file called MyCompanyCodeSigningCertificatePrivateKey.pfx) which I purchased to use with the installer and was wondering if and how I could use this.
I tried selecting my pfx file in the My Project -> Signing -> "Choose a strong name key file" dialog. It made a copy of the pfx file in my project folder but when I tried to build the project, I got the following error:
Error 1 Cannot import the following key file: MyCompanyCodeSigningCertificatePrivateKey.pfx. The key file may be password protected. To correct this, try to import the certificate again or manually install the certificate to the Strong Name CSP with the
following key container name: VS_KEY_C0B6F251F0FB6016
After a little research, I found out I might be able to use signtool to sign the dll in a post-build step.
I added the following command to the post-build event, before the command I use to regasm the assembly.
"path to signtool\signtool" sign /f "MyCompanyCodeSigningCertificatePrivateKey.pfx" /p "xxxx" /v "$(TargetPath)"
When I built the project, the dll appeared to get signed (the output window showed a bunch of confirming text as well as "Successfully signed: c:\MyAddIn\bin\Release\MyAddIn.dll") but the next step in the post-build (regasm myaddin.dll /codebase)
issued a warning RA0000 (see below) but reported "Types registered successfully".
Here's the message I get from regasm, even though the output window says the dll was sucessfully signed:
RegAsm : warning RA0000: Registering an unsigned assembly with /codebase can cause your assembly to interfere with other applications that may be installed on the same computer. The /codebase switch is intended to be used only with signed assemblies. Please give your assembly a strong name and re-register it.
Types registered successfully
I'm not using a shim if that makes a difference.
How do I sign my add-in so it loads when the user has checked "Require application add-ins to be signed by a trusted publisher"?
Any tips would be appreciated.Hello,
Why do you need to use the regasm utility from the post-build action?
There is a difference between signing the assembly with a strong name and digital signature. The
How to: Sign an Assembly with a Strong Name article in MSDN explains how to sign an assembly with a strong name (.snk). See
How to digitally sign a strong named assembly for adding a digital signature.
You may also find the
What's the Difference, Part Five: certificate signing vs strong naming article helpful. -
How to show the User Name on the Cart.aspx page when a user is connected.
Hi,
I am trying to find how I can get the User Name and display it in the top of the Cart.aspx.
For the diplay point of view, this is fine (I have created a <Literal> with a property ID, and specified it in the prerender.)
However, i can not find anywhere how to take the UserID from.
Do you know if there is a way to get this Data?
Thanks.I use something like this within the login control::
<%@ Import Namespace="netpoint.classes" %>
<%@ Import Namespace="netpoint.api.account" %>
private NPBasePage _bp;
protected void Page_Load(object sender, System.EventArgs e){
bp = (NPBasePage)Page;
NPUser u = new NPUser(bp.UserID);
Literal1.Text = u.FirstName + " " + u.Surname; -
How to make a text field required at run time when the user clicks the checkbox ?
I got a form where , there are several checkboxes and text fields associated with that checkboxes.If the use clicks on the check box then the associated
text fields should become required.I have tried the change event and the click event for the checkboxes.It gives error in the onChnage event and I got some weird results in the on click event .Sometimes if the user click the check box , then for the 1st time the field doesnt become required , then the user onclicks the check box and when the user clicks the checkbox for the second time the field becomes required,but if i deselects the highlighted field option and selects it again the field becomes required even if the user onchecks it I am totally confused !!! Adding to it i have also written the wrong code still i achieved the desired result ?? How it can be possible . I am writing the codes below , please help me as i am working under a deadline from the client.
onChange event :
var newVal = this.boundItem(xfa.event.newText);
if(newVal == 0)
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.Purchasecost3_1" ).validate.nullTest = "disabled";
else
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.Purchasecost3_1" ).validate.nullTest = "error";
For the onClick event :
var a = xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row2.CostItemRecovere d_OnlyEnergyCharges").rawValue;
//app.alert(a);
if(a == 0)
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").validate.nullTest = "error";
if(a == 1)
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").validate.nullTest = "disabled";
Please help someone !!!I used the onchange event and wrote the code for it. I got the result . But there is a problem.All these fields are in a table and it's a dynamic table where you can add rows dynamically at the run time .I have other change event for some fields in this table .All are working fine when i add the row.But for this check box the required fields are not validated as required at the run time . I am here giving the code , Please help me .
form1.Subform0.Subform1.Subform9.Subform10.Table48.Row2.CostItemRecovered_OnlyEnergyCharge s::change - (JavaScript, client)
if(this.rawValue == "1")
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L2_1").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L1_2").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L2_2").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L1_3").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L2_3").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L1_4").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L2_4").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L1_5").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L2_5").mandatory= "error";
else
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").mandator = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L2_1").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L1_2").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L2_2").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L1_3").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L2_3").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L1_4").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L2_4").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L1_5").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L2_5").mandatory = "disabled"; -
How can i change the user that open the rfc connection (sm58) from R/3?
Hi all,
i'd like to know how can i customize the user 'connecting' R/3 and BW, i mean: when i launch a data extraction a fixed user creates the rfc connection to BW (and i can see it from tcode sm58 in r/3), i need to use a different username so that it will come be more easy for me to reorganize the rfc queue in case of errors (we are doing some testing), it's possible to do something like this or everyone has to share the same user r/3 side?
I hope i've been clear...
thanks for the help
S.Hi...
Its recommended that only one user executes the RFC because you must manage the authorizations for remote execution only with few users....in case on error you can send the user as a parameter of the RFC and you can buid the error message with this parameter and identify the user of execution...
I hope this helps you
Regards -
How do I get the user name and password for the Apple Extreme Router to connect to a Slingbox
How do I get the user name and password for the Apple Extreme Router to set up my Slingbox? It will not accept the Apple Extreme Name and password.
The AirPort Extreme does not have a User Name, but it does have a device name and device password, which you may have already tried.
There is also a Wireless Network Name and Wireless Network Password for the AirPort Extreme, which might be what the Slingbox is looking for if you are trying to connect it to your wireless network.
There are no other "user names" or "passwords" on the AirPort Extreme.
You established the device name, device password, wireless network name and wireless network password when you originally configured the AirPort Extreme.
If you cannot remember these, you will need to perform a Soft Rest to reset everything. Follow the instructions in this Apple support document:
Resetting an AirPort Base Station or Time Capsule FAQ -
How to clear text fields when the user navigates back to the screen
Hi,
Does anyone have any idea on how to clear the text input fields and dropdown boxes when the user navigates back to the screen, say for e.g. create screen?
My issue is that i have plenty of fields in the create screen within a form. Is there a way to avoid programaticaly blanking out every field and just do it at the form level using an api to reset to a state before the user entry?
ThanksThis code allows you to make it more generic, and you would need to tweak it if there are more than TextInput controls, but it should provide some ideas.
As far as using states, you could use SetProperty to set the text to empty, but that might be messier.
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:Script>
<![CDATA[
import mx.containers.FormItem;
import mx.controls.TextInput;
import mx.events.IndexChangedEvent;
import mx.core.Container;
private function clearSreen(evt:IndexChangedEvent):void{
var view:Container = tn.selectedChild as Container;
for each(var child:Object in view.getChildren()){
if(child is FormItem){
var subchild:DisplayObject = child.getChildAt(0);
if(subchild is TextInput){
TextInput(subchild).text = "";
]]>
</mx:Script>
<mx:TabNavigator id="tn" resizeToContent="true"
change="clearSreen(event)">
<mx:Form id="frm1" label="View Number One">
<mx:FormItem label="First name:">
<mx:TextInput/>
</mx:FormItem>
<mx:FormItem label="Last name:">
<mx:TextInput/>
</mx:FormItem>
</mx:Form>
<mx:Form id="frm2" label="View Number Two">
<mx:FormItem label="Address1:">
<mx:TextInput/>
</mx:FormItem>
<mx:FormItem label="Address2:">
<mx:TextInput/>
</mx:FormItem>
<mx:FormItem label="City:">
<mx:TextInput/>
</mx:FormItem>
<mx:FormItem label="State:">
<mx:TextInput/>
</mx:FormItem>
<mx:FormItem label="Zip code:">
<mx:TextInput/>
</mx:FormItem>
</mx:Form>
</mx:TabNavigator>
</mx:Application>
If this post answers your question or helps, please mark it as such. Thanks!
http://www.stardustsystems.com
Adobe Flex Development and Support Services -
How to get the Useru2019s position when the user doesnu2019t have CP relation
We have a custom program which will add / delete attributes (In transaction PPOSA_BBP). It is working fine for users which were assigned with CP relation But it fails for users which doesnu2019t have CP relation (since we are getting the position of users form HRP1001 then we are retrieving the existing attributes based on the position after that updating the attributes) as we are getting the position from HRP1001 it fails for users were no CP relation.
Help us how to get the Useru2019s position when the user doesnu2019t have CP relation. Suggest us any function module or how to query the HRP1001 or some other table if exists
Regards
PaulHi Paul,
Have a look at these tables.
Using table BUT000 the central business partner data are stored, f.e. partner type, partner names, partner number, partner guid, person number, etc. In table BUTBKK the bank data to a business partner are stored.
Central business partner address data
The table ADRC is used for the address of a business partner. Table BUT020 links the business partner number with the address number. Using table BUT021 several addresses to a business partner with different usages (modes), f.e. correspondence or delivery address, can be stored. The personal data of a business partner person are stored with key person number in table ADRP. The person number is assignd to a business partner person in table BUT000. Communication data of business partners as e-mail, telephone, fax, etc. are stored in the tables ADDR1 u2013 ADDR12. The business address of a contact person or an employee consists of the organization address (company resp. org.-unit) and of an address addition, which describes f.e. a building, a room number, etc. The address addition is stored in table ADCP and is identified by the keys address number of the organization address and person number.
Relationships between business partners
Table BUT050 contains the relationships between a business partner organization and a business partner person using relation types. The relation types are defined in table TBZ9, f.e. the relation type u2018has employeeu2019 corresponds to identifier u2018BUR010u2019, the relation type u2018has contact personu2019 corresponds to identifier u2018BUR001u2019. Table BUT051 stores communication data of a contact person relationship (compare to table ADCP). Table BUT052 stores several address numbers to one business partner relationship (including a standard flag).
Hope this helps,
Kind Regards,
Matthew -
How to preven JButton of generated actions when the user keep pressing down
How to preven JButton of generated actions when the user keep pressing down the key or the short cut
The code below to show the issue when the user keep pressing Alt+ O
We want to prevent the JButton from generating multi actions just one action only
A sample of code shows the behaviour which has to be prevented. Continue pressing "Alt +O" and you will see the standard ouptput will print time stamps
Please notice, I am NOT interested in Mouse press which has a solution by adding a threshold ( setMultiClickThreshhold(long threshhold) on the JButton as an attribute.
public class TestPanel extends JPanel
private JButton btn;
public TestPanel()
btn = new JButton("Open");
this.add(btn);
registerCommand(new MyAction(), InputEvent.ALT_MASK,
KeyEvent.VK_O, btn, btn.getText(), 0);
public static void registerCommand(AbstractAction action,
int mask,
int shortCommand,
JComponent component,
String actionName,
int mnemonicIndex)
InputMap inputMap = component.getInputMap(JComponent.WHEN_IN_FOCUSED_WINDOW);
KeyStroke knappKombination = KeyStroke.getKeyStroke(shortCommand, mask);
if ((component instanceof AbstractButton)
&& mnemonicIndex >= 0
&& mnemonicIndex < actionName.length()
&& (shortCommand >= KeyEvent.VK_A && shortCommand <= KeyEvent.VK_Z))
((AbstractButton) component).setDisplayedMnemonicIndex(mnemonicIndex);
if (inputMap != null)
ActionMap actionMap = component.getActionMap();
inputMap.put(knappKombination, actionName);
if (actionMap != null)
actionMap.put(actionName, action);
public static class MyAction extends AbstractAction
private static final long serialVersionUID = 1L;
@Override
public void actionPerformed(ActionEvent e)
System.out.println(System.currentTimeMillis());
public static void main(String... args)
SwingUtilities.invokeLater(new Runnable()
public void run()
JFrame frame = new JFrame("Testing");
JPanel panel = new TestPanel();
frame.getContentPane().add(panel);
frame.setPreferredSize(new Dimension(500, 500));
frame.setMinimumSize(new Dimension(500, 500));
frame.pack();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setVisible(true);
}Edited by: user12130673 on 2013-feb-13 03:01Use KeyStroke getKeyStroke(int keyCode, int modifiers, boolean onKeyRelease) with onKeyRelease=true instead?
Maybe you are looking for
-
Need http address to stay the same
I have bought our company web address with web forwarding set up to go to our free ntl web space. This works fine when you type in the company address. The problem is if you click on a link on the index page it takes you to the requested page but the
-
I have asked this question before, but nobody has answered and I am still having problems. When I create a slidshow in iPhoto and then send it to IDVD, it converts it to a Movie, but when played back on the TV screen everyone appears fatter than they
-
I have developed a LC designer version 8 form and saved it as .pdf. I am trying to grant user rights in Adobe8 prof, and getting error message - "This document could not be reader enabled". I want our users to complete the form and save the form via
-
i did some thing wrong that makes my mac just showing a black screen and amessage says you need to restart your mac .... etc and i wanted to talk to any one from apple and i couldnt get my mac serial number and i could do nothing i turned to some one
-
Dear gurus, I'm new at BPC version NW, and I'm with a problem with Total at dimension Time. When I create a new input schedule with EVDRE(), with time in column, per ex., the values are not totalized to TOTAL.2010, however if I put 2010.Q1 values are