How to Check whether incoming field is Alpha or Nuemeric in Mapping

Hi all,
I have the logic like this
If the incoming Location code value is totally Alpha means i have to concatenate Location code and the last three digits of Delivery No. else pass the location code as it is
Regards

Hi Vamsi,
use this UDF it will work fine ,i tested in eclipse
Fist pass the two arguments as input to UDF one is LocationCode and Delivery No
(String LCode,String DevNo,Container.)
if (LCode.matches("[a-zA-z]")) {*
Sring Out = LCode+Dev.substring(0,3);
return Out;
else
return LCode;
let me know the length of Delivery Number,if it is constant value then you need to chnage the substing function index.

Similar Messages

How to check whether a field contains at least one numeric value

how to check whether a field contains at least one numeric value..

Hi,
I hope that this code will works.
constants:
c_digit_grp TYPE char11 VALUE '0123456789', " Digit group
* Data Declaration
data :
str type string.
* if you want check entire string and pass entire string
if str CA c_digit_grp.
* write your logic ---this block will execute atleast one numeric value exists in the string
Endif.
Regards
Bhupal Reddy

How to check if a field is hidden or disabled?

I have implemented a progress bar, however, it counts all the fields in the form including hidden and disabled fields as well. I need to figure out how to check whether a field is hidden or disabled, and not count them for the progress bar. Please help!

Try this (javascript):
if (field.presence == 'visible' && field.access == 'open') {
include in count...

I need to add check whether 21 fields of a internal table are empty or not.

Hello,
I need to add check whether 21 fields of a internal table are empty or not.How can we write a code for the same wand what would be the correct syntax for it.
I tried entering all the fields in the IF loop with AND condition but its giving syntax error.Perhaps this is because the lenght of the IF condition would be more than the allowed one.

Hi,
After the select quiery.
If not itab is initial.
Message 'Table is not empty' type 'I'.
Endif.
Regards,
Jagadish.

R12.1.1 staging complete! How to check whether the stage is Good

Hi Gurusl,
I have completed staging R12.1.1 for Hp unix B.11.31. I want to know how to check whether the stage is good for installation or whether it is corrupted. Is there any metalink note or script from where we can check it. Ur help will be highly appreciated. Thanks in advance
regards,

Hi,
Please refer to (Note: 802195.1 - MD5 Checksums for R12.1.1 Rapid Install Media).
Regards,
Hussein

How to check whether transport path exist between two systems in sld??

Hi,
I have two systems namely 'A' and 'B' and created business systems for both of them.Then i created transport path between the two systems.How i check whether what i have done is right in SLD.

<b>WRT to CMS</b>
am not sure with this but u can try:
1. Start CMS: http://<host>:<J2EE Engine http port>/webdynpro/dispatcher/sap.com/tcSLCMS~WebUI/Cms.
2. Goto lansdscape configurator and check there
Message was edited by:
Prabhu S

How to check whether follow on document is created for sc or po,is there any table or fm available?

How to check whether follow on document is created for sc or po,is there any table or fm available?

Hello Venu
Check FM: BBP_PD_SC_GETDETAIL and BBP_PD_PO_GETDETAIL table E_HEADER_REL
Check this: SRM Shopping cart and PO tables link
Regards

How to check whether there r new txt files in a folder n file creation date

How to check whether there r new text files in a specified folder and what is the date of creation of the text file.........?

Hi
I have been searching for a solution to find the date of creation of a file for over 6 months now but haven't found it. So I presume that it is not possible though I havent found any authentication of my assumption in any document.
Cheers!
Shailesh

How to check a checkbox field value in fw9 PDF form

Hi,
I got a PDF given form IRS (http://www.irs.gov/pub/irs-pdf/fw9.pdf). While creating a widget to this pdf form to sign it, I merged the custum data to those PDF form fields using API setMergeFields.
All the data fields are merged fine except the checkboxes. I tried by passing the values to the merge_fields array as 'On', '1', 'checked', 'checkbox(checked)' but no luck
What is wrong here in checking the chexbox field in this fw9 PDF or How to check a checkbox field in a form?
Thank you,

Hi Simon,
I re-added and edited the fields of fw9 form by pdf printer. While doing so, I made fields as ready only so that, the data cannot be edited in the form through the widget but will be merged the data to fields only be the code. Wherein Im using the widget only for signature but not for form filling.
Here, Im able to merge my custom data to all fields while creating widget but not to the fields of checkboxes. The checkboxes fields which are made ready-only are not allowing me to merge the value as checked by the API.
Please help me,
Thanks you,

How to check whether calendar is being used in any of the sap application

Hello All,
We are having few factory calendars. However some of the calendar having valid to year 2010. Can you please let me know how to check whether these calendar is being used in any of the sap application/module
kindly reply as early as possible
Regards
Girish

Hi RKS
yesterday BLOG by our SUMMER WANG helps every SRM consultant to debug the PO error
/people/summer.wang/blog/2010/05/11/trouble-shooting-of-srm-po-transfer-error
Good work Summer wang !!
Muthu

How to check Whether the File is in Progress or used by some other resource

Hi All,
I am retrieving a file from the FTP server using Apache commons FTP.
I need to check whether the file is fully retrieved or in progress.
for now i can able to use the file which is partially retrieved. it is not throwing any file sharing exception or i am unable to find whether it is in progress.
How to check whether the file is in progress ? or The file is accessed by some other resource ?
Pls Help me.
Thanks,
J.Kathir

Hi Vamsi,
Explicitly such kind of requirement has not been catered and i dont think you would face a problem because any application that is writing to a file will open the file in the read only mode to any other simultaneous applications so i think your concerns although valid are already taken care off .
In the remote case you still face a problem then as a work around. Tell the FTP administrator to set the property to maximum connections that can be made to ftp as one. I wonder if you have heard of the concept of FTP handle , basically the above workaround is based on that concept itself. This way only one application will be able to write.
The file adapter will wait for its turn and then write the files.
Regards
joel
Edited by: joel trinidade on Jun 26, 2009 11:06 AM

How to check whether my sol man installation is on sol man 7.0 or?

Hellol All,
Can anyone help me How to check whether my sol man installation is on sol man 7.0 or sol man 7.0 EHP1.
Thank you,
Srihari

Hi,
Your system status should tell you that. Any logged in screen of your solution manager system --> Status. Component Version should be as "SAP EHP 1 for SAP Solution Manager 7.0" to be Ehp1 or "SAP Solution Manager 7.0"
Hope this answers your question.
Feel free to revert back.
-=-Ragu

How to check whether the Application Server directory exits or not

Hi,
I have a selection screen in which I give the Application server file name(UNIX file) as input. Here, I would like to check whether the Server directory exists or not.
Let us say, the path I gave in the selection screen is /usr/sap/tmp/testfile.txt . Here, the file name is testfile.txt and the server directory is /usr/sap/tmp . I would like to check whether this directory /usr/sap/tmp exists in the server or not. I am not bothered about the file name as I am going to write data into the file. I am mainly concerned about whether the directory exists in the server or not. and one more thing... this is the Application Server path not the Local path.
Can anyone help me on the same how to check whether the server directory exists or not.
Thanks in advance.
Best Regards,
Pradeep.

Also you can use the FM EPS_GET_DIRECTORY_LISTING for this purpose.
Store the directory name
    l_dpath = p_file+0(l_no).
Validate the directory of the application server
    CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
      EXPORTING
        dir_name               = l_dpath
      TABLES
        dir_list               = l_i_dlist
      EXCEPTIONS
        invalid_eps_subdir     = 1
        sapgparam_failed       = 2
        build_directory_failed = 3
        no_authorization       = 4
        read_directory_failed = 5
        too_many_read_errors   = 6
        empty_directory_list   = 7
        OTHERS                 = 8.
If any problem occurs with the directory then display proper
error message
    IF sy-subrc <> 0.
    Display error message
      MESSAGE e018 WITH 'Problem with directory entered'(008).
    ENDIF. " sy-subrc <> 0
Regards,
Joy.

How to check whether a Document in KM is classified or not using JAVA API

Hello Everyone,
Can anyone tell me, How to check whether a Document in KM is classified or not, using JAVA API's??
Thanks & Regards,
Adren D'Souza

Hi,
The code is as follows:
IIndexService indexService = null;
try {
   indexService = (IIndexService) ResourceFactory.getInstance().getServiceFactory().getService(IServiceTypesConst.INDEX_SERVICE);
} catch (ResourceException e) {
   if (indexService == null) {
     log.errorT("Error on instanciating the index service");
     return this.renderMessage(this.getBundleString(RES_NO_INDEX_SERVICE), StatusType.ERROR);
// get index
IIndex index = null;
try {
   index = indexService.getIndex("YourIndexID");
} catch (WcmException e1) {
   log.errorT("Error when trying to get the index");
   return this.renderMessage(this.getBundleString(RES_NO_INDEX), StatusType.ERROR);
// check if the index is a instance of AbstractClassificationIndex
AbstractClassificationIndex classiIndex = null;
if (index instanceof AbstractClassificationIndex) {
   classiIndex = (AbstractClassificationIndex) index;
} else {
   log.errorT("The index " + index.getIndexName() + " is no classification index");
   return this.renderMessage(this.getBundleString(RES_NO_CLASSIFICATION_INDEX), StatusType.WARNING);
//give your KM Resource here for which you want to know if it is classified or not
boolean classified = classiIndex.isDocClassifiedInAnyTax(resource);
Regards,
Praveen Gudapati

How to check whether system privilege are granted

How to check whether system privileges like 'create session' and other ones are granted for user.
Is there any sys table where this information is available?
Regards - Neuron

Keep in mind select * from dba_sys_privs where grantee = 'some-user' will give you a list of privileges granted to some-user directly. To get complete list of system privs granted to a user both directly an via roles use:
ACCEPT USER PROMPT 'Please enter user name: '
COLUMN PATH FORMAT A90
SET LINESIZE 132
SELECT PATH,
        PRIVILEGE
FROM DBA_SYS_PRIVS,
          SELECT 'DIRECT GRANT' PATH,
                  '&USER' GRANTED_ROLE
            FROM DUAL
         UNION ALL
          SELECT LTRIM(SYS_CONNECT_BY_PATH(GRANTED_ROLE,'->'),'->') PATH,
                  GRANTED_ROLE
            FROM DBA_ROLE_PRIVS
            START WITH GRANTEE = UPPER('&USER')
            CONNECT BY PRIOR GRANTED_ROLE = GRANTEE
WHERE GRANTEE = GRANTED_ROLE
/Now on top of privileges granted to a user, user also has privileges granted to PUBLIC. To get privileges user receives via PUBLIC run the above script specifying PUBLIC at the prompt.
SY.

How to Check whether incoming field is Alpha or Nuemeric in Mapping

Similar Messages

Maybe you are looking for