How to check whether the new records are inserted or not in SSIS

Hi All,
I have a SSIS package which insert data from Table A  to Table B . I need to insert only new records to Table B. If any record is not there it should insert the record if not ignore that record.
I used Lookup Transformation but it doesn't works from me, which tab should i need to select? Like in General tab we have  ignore failure, Fail Component,Redirect rows to no match output, Redirect rows to error output?
Please help me on this issue. 
Thanks, Shyam Reddy.

On what basis you're doing the lookup? Are you using correct column for the lookup? It should be based on common columns based on which tables are related (mostly primary key column)
Can you also show the column tab to see how you've done the mapping  ?
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Similar Messages

  • How to check whether set up tables are filled or not

    Hi Gurus,
    How to check whehter set up tables are filled or not?
    Cheers,
    Reddy.

    Hi Reddy.......
    And another point I want to make u clear............LBWQ is not the Delta Queue.............Delta queue is RSA7...............it comes into play in delta loading.......LBWQ is Extraction Queue.........While delta loading....if we use the Update mode Queued Delta........then any Changes will not directly get updated in the Delta queue.....For the Delta set up.........
    1) First u hav to run init with data transfer(After filling the set up table)
    2) After that any Changed ........will be recorded in the Extraction Queue(LBWQ)........
    3) After a certain number of records get accumulated in LBWQ........We hav to run V3 jobs to bring the data in the Delta queue(RSA7)...
    Check this.....
    Re: question on LBWQ and RSA7
    Regards,
    Debjani.....

  • How to check whether the Application Server directory exits or not

    Hi,
    I have a selection screen in which I give the Application server file name(UNIX file) as input. Here, I would like to check whether the Server directory exists or not.
    Let us say, the path I gave in the selection screen is /usr/sap/tmp/testfile.txt . Here, the file name is testfile.txt and the server directory is /usr/sap/tmp . I would like to check whether this directory /usr/sap/tmp exists in the server or not. I am not bothered about the file name as I am going to write data into the file. I am mainly concerned about whether the directory exists in the server or not. and one more thing... this is the Application Server path not the Local path.
    Can anyone help me on the same how to check whether the server directory exists or not.
    Thanks in advance.
    Best Regards,
    Pradeep.

    Also you can use the FM EPS_GET_DIRECTORY_LISTING for this purpose.
      Store the directory name
        l_dpath = p_file+0(l_no).
      Validate the directory of the application server
        CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
          EXPORTING
            dir_name               = l_dpath
          TABLES
            dir_list               = l_i_dlist
          EXCEPTIONS
            invalid_eps_subdir     = 1
            sapgparam_failed       = 2
            build_directory_failed = 3
            no_authorization       = 4
            read_directory_failed  = 5
            too_many_read_errors   = 6
            empty_directory_list   = 7
            OTHERS                 = 8.
      If any problem occurs with the directory then display proper
      error message
        IF sy-subrc <> 0.
        Display error message
          MESSAGE e018 WITH 'Problem with directory entered'(008).
        ENDIF. " sy-subrc <> 0
    Regards,
    Joy.

  • Is there any tool to check whether the proper data is inserting or not?

    Hi,
    We have different products A,B and C.
    whenever user crates an account under these products some X,Y,Z table gets updated.
    If user1 creates an account under A then X, Y, Z tables update with some data along with some ID
    If user2 creates an account under A then X, Y, Z tables update with SAME DATA along with some other ID
    Is there any tool to check whether the proper data is inserting (same data is inserting every time) or not?
    p.s : if this thread is not related to this forum .. where can I post?
    Thanks,
    Praveen

    Is there any tool to check whether the proper data is inserting (same data is inserting every time) or not?You need to check the code to see that. Is the update or insert on the table has from different places? In that case it would be better to have them moved to a centralized place may be a package.
    If you want to restrict the columns to specific values then you can use constraints.

  • How to check whether the report is being called or not

    Iam using srw.run_report.for calling another report. I have registered both the report in oracle apps11.0.3. When i run the master report in oracle apps I want to see whether the second report is called or not. How to check this.
    Thanks.

    try to check it in C:\Reports6i\Bin
    C:\Reports6i\Bin <-- this may varry depending on the location of your reports.
    btw, are you generating a pdf file?

  • How to check whether the user has a certificate or not?

    Hi everyone.
    We're currently finishing a web project and the last step is to check whether users accessing the application have a valid certificate or not.
    Users with a valid certificate can access all the data. Users without any certificate installed on their browsers may still proceed, but they won't be able to see all data. Please note that the lack of a certificate doesn't mean an error - it's just another use case.
    Is there any way to check whether users have a certificate installed on their browsers?
    Thanks in advance.
    Edit: sorry, I forgot to post some tech details. We're using Struts 1.2 on a Tomcat 5 app server.
    Message was edited by:
    advaca

    I am not sure how Tomcat handles this, but you need to use two-way (mutual authentication) request but not enforce SSL between Tomcat and the client browser. This will make the browser prompt the user for the cert they want to send. Then you'll need to tackle the other part of your problem, getting the correct content displayed depending on whether the user sent a cert or not. I'm even less help there than I was on the first part of your question.
    So, yeah - good luck with that
    Lee

  • How to check whether the Workflow event is triggered or not ?

    Hello All,
        My scenario is like this :
    1. Go to MM02
    2. Change a material of any view other than the classification.
    3. Save it.
    4. Go to transaction SWEL and check there .
    5. An entry has been created in that across the object type Y01BUS1001.
    6. Now I can check in the Transaction CFG1 the Log details.
    7. This is correct.
    8. Now the same procedure is not working when I change the material for the classification View.
    9. Do i need to check something else ?
    10. When the classification data is changed for a material the Object type Y01BUS1003 has to be triggered.
    Can any one help me out ?
    Regards,
    Deepu.K

    Hi,
    If you are using the Event collector, you can check in from RSA1-> Tools-> Event collector. You cannot trace whether that event was raised from anywhere I think
    Regards

  • How do i get my contacts back? they are backed up by i cloud but when I "MERGE" only the new ones are there and not the old ones

    how do i get my contacts back? they are backed up by i cloud but when I "MERGE" only the new ones are there and not the old ones

    Hi sfuentes,
    You need to check iCloud to see if they are actually there. Go to iCloud.com and sign in and then look at your Contacts there to see if the old ones are still showing on iCloud.
    If they are not, then you can either re-enter them while you are on iCloud.com, or you can restore your device from the backup where you saved them:
    https://support.apple.com/kb/ph12521
    Cheers,
    GB

  • How to check Whether the File is in Progress or used by some other resource

    Hi All,
    I am retrieving a file from the FTP server using Apache commons FTP.
    I need to check whether the file is fully retrieved or in progress.
    for now i can able to use the file which is partially retrieved. it is not throwing any file sharing exception or i am unable to find whether it is in progress.
    How to check whether the file is in progress ? or The file is accessed by some other resource ?
    Pls Help me.
    Thanks,
    J.Kathir

    Hi Vamsi,
    Explicitly such kind of requirement has not been catered and i dont think you would face a problem because any application that is writing to a file will open the file in the read only mode to any other simultaneous applications so i think your concerns although valid are already taken care off .
    In the remote case you still face a problem then as a work around. Tell the FTP administrator to set the property to maximum connections that can be made to ftp as one. I wonder if you have heard of the concept of FTP handle , basically the above workaround is based on that concept itself. This way only one application will be able to write.
    The file adapter will wait for its turn and then write the files.
    Regards
    joel
    Edited by: joel trinidade on Jun 26, 2009 11:06 AM

  • R12.1.1 staging complete! How to check whether the stage is Good

    Hi Gurusl,
    I have completed staging R12.1.1 for Hp unix B.11.31. I want to know how to check whether the stage is good for installation or whether it is corrupted. Is there any metalink note or script from where we can check it. Ur help will be highly appreciated. Thanks in advance
    regards,

    Hi,
    Please refer to (Note: 802195.1 - MD5 Checksums for R12.1.1 Rapid Install Media).
    Regards,
    Hussein

  • How to check whether a user session is null or not

    Hi
    I am using Jdeveloper 11.1.2.2
    I have a use case of running some Junit test case, this is the problem I have :
    There are some Junit tests which are written for some VO's. While testing insert and update operation in Junit there is two mandatory columns Created by and Updated by to be entered for committing into the database.
    These values are taken from the UserName of the current UserSession .
    So for getting the these values for each user I thought of displaying a JPanel before the test is run, where the user enters the Username and password which is validated and the user is verified.
    First, I need to check whether there is a session present or not. For checking this, I wrote a createUserSession() and did like this inside it :
    if(fixture.getApplicationModule().getSession().getUserData().isEmpty())If so to show the Jpanel and get the user details and verify the user.
    But while running the test itself I found that the session is already present, now I just have to input the values based on who is the user.
    But Junit doesn't run the tests in the order in which the test are written. So I have to call this in all the test cases.
    The Question is :
    How can I check whether the session is already present or not, so that I don't have to ask the user every time while every test is running to enter the Username and Password ?
    Thanks,
    Nigel.
    Edited by: Nigel Thomas on Jul 30, 2012 10:26 AM

    Hi,
    wondering why don't you create test users and then automatically log them in as Jan Vervecken did on the threads I pointed you to. This way your test cases run without user interaction. To test if a session exists for a user, I would put a custom property into user data. If this property exists, the user session is an existing one. However, make sure the information you save into the user data survives passivation as otherwise the information you get out of this is not accurate. See: http://tompeez.wordpress.com/2011/07/08/jdev-always-test-your-app-with-applicationmodule-pooling-turned-off/
    Frank

  • When I change a password, sometimes I get a pop-up asking if I want to save the new password - sometimes it doesn't appear. How can I save the new password if popup does not appear?

    When I change a password, sometimes I get a pop-up asking if I want to save the new password - sometimes it doesn't appear.
    How can I save the new password if popup does not appear?

    The website may be using autocomplete=off to prevent Firefox from saving the name and password.
    You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
    *http://kb.mozillazine.org/User_name_and_password_not_remembered
    *Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

  • How to ensure whether the row is successfully inserted

    HI All,
    Is there any means of ensuring whether the row was successfully inserted or not?
    I want to insert a row into a table and if it is successfully inserted I want to return the return code as 0 else some error code.
    Also I am selecting a value into a variable from the join of 3 records and the select is supposed to return a unique value.
    What I want to ensure is if at all it is returning a row of not and if not then pass other value(say null)
    What I have done is I have taken the result into a cursor and I loop through it because I know that the cursor proceeds if it finds a null as the resultant row. But I know it is not a good method.
    What else can I do?
    Regards,
    Amit

    a basic example would look something like this
    Create Or Replace Procedure Your_Procedure_Name (pErrNum Out Number) Is
    Begin
      Insert Into Your_Table_Name
       (col1, col2, col3)
      Values
       (pCol1, pCol2, pCol3);
      -- return 0 means successfull
      pErrNum := 0;
    Exception
      When Others Then
        -- return the errorcode
        pErrNum := SQLCODE;
    End;
    /

  • How to check wheather the project is having 'AUC' or not.

    Hi friends,
    How to check wheather the project is having 'AUC' or not.
    Regards,
    Safiq.

    Hi Basha ,
    as per my knowledge , WBS will have AUC ,Settlement rules  etc, so u need to check asset tables based on the WBS element .
    regards
    Prabhu

  • How to check whether the Application Server file has already been opened?

    Hi Experts,
    I have a query related to Application Server file. I am using multithreading concept to process the data and write it in to a single file.
    For example, I have 4 workprocesses. Each workprocess will process the data and whenever it has a record available it will access the file and write it directly.
    Problem is the statements that are written in the workprocess is same and I want to check the status whether the file has been opened or not ?
    Thanks in advance!!!
    Thanks,
    Babu Kilari

    Depends on the structure, and whether the data needs to be sorted in some way in the final file.
    In any case, I don't think there will be a significant performance difference between using OPEN DATASET again and getting funny with Unix commands.
    If you don't need to sort the final file, you can use strings to read, concatenate and write the data even without line-based DO ENDDO loops, this works pretty fast.
    I hope we are not talking about GBytes of data
    Thomas

Maybe you are looking for

  • My iPhone 4 (iOS5) won't allow me to update apps

    When I originally got my iphone 4, I originally synced my phone to a friends computer and got his apps. I later set up my own appleID and started downloading new apps again. However, now my iphone is getting confused about which apps are owned by who

  • E-Mail Notification in Approval Process (EP 6.0 SP2)

    Hi all, we established an approval process for specific documents in our KM repository. Additonally to the notifications in the notification i-View we want to send out notification e-Mails at each approval step. We have also a subscription service on

  • EXPORT IMPORT not working in implicit enhancements

    Hi, I need to export from an implicit enhancement spot a deep structure data to another implicit enhancement spot. export is_replord_conf = is_replord_conf to memory id 'REPLE' . import is_replord_conf = is_replord_conf from memory id 'REPLE' . For s

  • Macbook pro is slow.....HELP

    My 2011 Mac Book pro is slow. i do not have many applications installed except skype, iAntivirus Picasa, Microsoft Office and amazon Mp3. i dont have alot of files i many use my macbook for the internet which is also slow. How can i speed up my compu

  • 10G aggregation  rule confusion

    I am confusing aggregation rule in pivot table view. What dose it control? Grand total or all the columns value? For example: When I drag Year, Month, Sales columns into the criteria area and make use of pivot table to generate report , I use aggrega