How to clean the asm instance from RAC manually

for some reason i run crs_unregister asm and crs_unregister lsnr to remove the asm and listener resource from crs yesterday
and today i want rebuild the asm instance ,so i run dbca again ,but error
Error when starting ASM instance on node rac1: PRKS-1009 : Failed to start ASM instance "+ASM1" on node "rac1", [PRKS-1011 : Failed to check status of ASM instance "+ASM1" on node "rac1", [CRS-0210: Could not find resource ora.rac1.ASM1.asm.]]
[PRKS-1011 : Failed to check status of ASM instance "+ASM1" on node "rac1", [CRS-0210: Could not find resource ora.rac1.ASM1.asm.]]
DBCA could not startup the ASM instance on node: rac1. Manual intervention is required to recreate these instances. If you choose to proceed, ASM diskgroups will not be mounted on non-started remote ASM instances. Do you want to proceed with ASM diskgroup management?
and problem is how to do this "Manual intervention is required to recreate these instances", I already do 1, dd the asm disk, 2, remove the +ASM directory from $ORACLE_BASE, 3,clean ASM info from /etc/oratab, so what i can do next ?
i try restart crs ,now the error info is different !!
[oracle@rac1 ~]$ dbca -silent -responseFile /home/oracle/dbca.rsp
Look at the log file "/opt/ora/product/10.2.0/db_1/cfgtoollogs/dbca/silent6.log"
for further details.
[oracle@rac1 ~]$ cat /opt/ora/product/10.2.0/db_1/cfgtoollogs/dbca/silent6.log
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_+ASM1'
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_+ASM1'
Edited by: 859340 on 2011-7-8 下午11:01

Hi,
Can you post the dbca log?
and do you share the asm home with oracle home? if it is separated then add LISTENER_+ASM1 in tnsnames in ASMHOME, otherwise add it in ORACLEHOME
Cheers

Similar Messages

  • How to clean the trash forever from locked files?

    How to clean the trash forever from locked files?

    Depends on what the problem is, but holding down the option key while emptying the trash will bypass the locked status and delete the files.
    If those files are still in use (or the Finder thinks so), they cannot be deleted in the normal way. If the option key trick doesn't work, we can use the terminal.

  • How to remove the entity instances from a decision report

    Please see below the rules and the resulting decision report
    How can I remove, from the decision report, the four lines that say "the persons in the family unit", instance 1, instance 2, instance 3?
    I just can't seem to find a place where the use of silent or invisible will cause the four lines not to appear
    The Rules
    the applicants for income assistance in a family unit have completed (and submitted) to the minister an application for income assistance (part1) form if
    forall(the persons in the family unit, the person satisfies the requirements to complete and submit an application for assistance (part 1) form)
    the person satisfies the requirements to complete and submit an application for assistance (part 1) form if
    all
    the person is an applicant
    s4.1(2)(a)(i)     the person has provided a social insurance number
    s4.1(2)(a)(ii)     the person has provided the information, authorizations, declarations and verifications specified by the minister as required in the application for assistance (part 1) form
    The Decision Report
    EA Regs s4.1(2)(a)(Application - Part1) is satisfied.
    The applicants for income assistance in a family unit have completed (and submitted) to the minister an application for income assistance (part1) form.
    the persons in the family unit
    instance #1
    instance #2
    instance #3
    Abel satisfies the requirements to complete and submit an application for assistance (part 1) form.
    Abel is an applicant.
    Abel satisfies section s4.1(2)(a)(i).
    Abel has provided a social insurance number.
    Abel satisfies section s4.1(2)(a)(ii).
    Abel has provided the information, authorizations, declarations and verifications specified by the minister as required in the application for assistance (part 1) form.
    Edited by: A Gibson on Oct 11, 2010 3:35 PM

    Here are some further details. If images could be attached to this forum then I would have included some screenshots, but this forum only allows text.
    1. Set up regular name substitution (See the sections "Set up substitution" and "Substitute the actual value of a variable for its text" in the OPM Help article "Change the text of an interview question or sentence").
    2. In the Properties file, double-click on the entity. This will open the Edit Entity dialog.
    3. In the Edit Entity dialog, fill in the Identifier field with the variable you're using for the regular name substitution.
    4. Click OK and you're done!
    Cheers,
    Jasmine

  • How to refer to enclosing instance from within the member class?

    Hi
    How to refer to the enclosing instance from within the member class?
    I have the following code :
    import java.awt.*;
    import java.awt.event.*;
    public class MyDialog extends Dialog
         public MyDialog(Frame fr,boolean modal)
              super(fr,modal);
              addWindowListener(new MyWindowAdapter());
         public void paint(Graphics g)
              g.drawString("Modal Dialogs are sometimes needed...",10,10);
         class MyWindowAdapter extends WindowAdapter
              public void windowClosing(WindowEvent evt)
                   //MyDialog.close(); // is this right?
    In the above code, how can I call the "close()" method of the "Dialog" class (which is the enclosing class) from the inner class?
    Thanks in advance.
    Senthil.

    Hi Senthil,
    You can directly call the outer class method. Otherwise use the following way MyDialog.this.close(); (But there is no close() method in Dialog!!)
    If this is not you expected, give me more details about problem.
    (Siva E.)

  • How to remove the Planned leave from the LOV of Absence status? Only confirmed leave should be listed. for 11i instance.

    Hi Gurus,
    How to remove the Planned leave from the LOV of Absence status? Only confirmed leave should be listed. for 11i instance.
    Thanks
    Shobhit Shukla

    Hi Shobhit,
    Please personalize the self-service page and make that field non-updatable with default value "Confirmed".
    Thanks,
    Avinash

  • How to create an asm instance manaually? oracle 11gr2.

    env: oracle 11gr2 os: hpux or aix single machine , not rac.
    question:how to create an asm instance manaually?? diskgroup,listener,db ,they can be resigistered to crs??
    can anyone give me document about it?

    Hi,
    This is a simple answer:
    Automatic Storage Management (ASM)
    ASM was a new storage option introduced with Oracle Database 10gR1 that provides the services of a filesystem, logical volume manager, and software RAID in a platform-independent manner. ASM can stripe and mirror your disks, allow disks to be added or removed while the database is under load, and automatically balance I/O to remove "hot spots." It also supports direct and asynchronous I/O and implements the Oracle Data Manager API (simplified I/O system call interface) introduced in Oracle9i.
    ASM is not a general-purpose filesystem and can be used only for Oracle data files, redo logs, and control files. Files in ASM can be created and named automatically by the database (by use of the Oracle Managed Files feature) or manually by the DBA. Because the files stored in ASM are not accessible to the operating system, the only way to perform backup and recovery operations on databases that use ASM files is through Recovery Manager (RMAN).
    ASM is implemented as a separate Oracle instance that must be up if other databases are to be able to access it. Memory requirements for ASM are light: only 64 MB for most systems.
    Installing ASM
    On Linux platforms, ASM can use raw devices or devices managed via the ASMLib interface. Oracle recommends ASMLib over raw devices for ease-of-use and performance reasons. ASMLib 2.0 is available for free download from OTN. This section walks through the process of configuring a simple ASM instance by using ASMLib 2.0 and building a database that uses ASM for disk storage.
    Determine Which Version of ASMLib You Need
    ASMLib 2.0 is delivered as a set of three Linux packages:
    * oracleasmlib-2.0 - the ASM libraries
    * oracleasm-support-2.0 - utilities needed to administer ASMLib
    * oracleasm - a kernel module for the ASM library
    Each Linux distribution has its own set of ASMLib 2.0 packages, and within each distribution, each kernel version has a corresponding oracleasm package. The following paragraphs describe how to determine which set of packages you need.
    First, determine which kernel you are using by logging in as root and running the following command:
    uname -rm
    Ex:
    # uname -rm
    2.6.9-22.ELsmp i686
    The example shows that this is a 2.6.9-22 kernel for an SMP (multiprocessor) box using Intel i686 CPUs.
    Use this information to find the correct ASMLib packages on OTN:
    1. Point your Web browser to http://www.oracle.com/technology/tech/linux/asmlib/index.html
    2. Select the link for your version of Linux.
    3. Download the oracleasmlib and oracleasm-support packages for your version of Linux
    4. Download the oracleasm package corresponding to your kernel. In the example above, the oracleasm-2.6.9-22.ELsmp-2.0.0-1.i686.rpm package was used.
    Next, install the packages by executing the following command as root:
    rpm -Uvh oracleasm-kernel_version-asmlib_version.cpu_type.rpm \
    oracleasmlib-asmlib_version.cpu_type.rpm \
    oracleasm-support-asmlib_version.cpu_type.rpm
    Ex:
    # rpm -Uvh \
    > oracleasm-2.6.9-22.ELsmp-2.0.0-1.i686.rpm \
    > oracleasmlib-2.0.1-1.i386.rpm \
    > oracleasm-support-2.0.1-1.i386.rpm
    Preparing... ########################################### [100%]
    1:oracleasm-support ########################################### [ 33%]
    2:oracleasm-2.6.9-22.ELsm########################################### [ 67%]
    3:oracleasmlib ########################################### [100%]
    Configuring ASMLib
    Before using ASMLib, you must run a configuration script to prepare the driver. Run the following command as root, and answer the prompts as shown in the example below.
    # /etc/init.d/oracleasm configure
    Configuring the Oracle ASM library driver.
    This will configure the on-boot properties of the Oracle ASM library
    driver. The following questions will determine whether the driver is
    loaded on boot and what permissions it will have. The current values
    will be shown in brackets ('[]'). Hitting <ENTER> without typing an
    answer will keep that current value. Ctrl-C will abort.
    Default user to own the driver interface []: oracle
    Default group to own the driver interface []: dba
    Start Oracle ASM library driver on boot (y/n) [n]: y
    Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
    Writing Oracle ASM library driver configuration: [  OK  ]
    Creating /dev/oracleasm mount point: [  OK  ]
    Loading module "oracleasm": [  OK  ]
    Mounting ASMlib driver filesystem: [  OK  ]
    Scanning system for ASM disks: [  OK  ]
    Next you tell the ASM driver which disks you want it to use. Oracle recommends that each disk contain a single partition for the entire disk. See Partitioning the Disks at the beginning of this section for an example of creating disk partitions.
    You mark disks for use by ASMLib by running the following command as root:
    /etc/init.d/oracleasm createdisk DISK_NAME device_name
    Tip: Enter the DISK_NAME in UPPERCASE letters.
    Ex:
    # /etc/init.d/oracleasm createdisk VOL1 /dev/sdb1
    Marking disk "/dev/sdb1" as an ASM disk: [  OK  ]
    # /etc/init.d/oracleasm createdisk VOL1 /dev/sdc1
    Marking disk "/dev/sdc1" as an ASM disk: [  OK  ]
    # /etc/init.d/oracleasm createdisk VOL1 /dev/sdd1
    Marking disk "/dev/sdd1" as an ASM disk: [  OK  ]
    Verify that ASMLib has marked the disks:
    # /etc/init.d/oracleasm listdisks
    VOL1
    VOL2
    VOL3
    Create the ASM Instance
    ASM runs as a separate Oracle instance which can be created and configured using the Oracle Universal Installer. Now that ASMLib is installed and the disks are marked for use, you can create an ASM instance.
    Log in as oracle and start runInstaller:
    $ ./runInstaller
    1. Select Installation Method
    * Select Advanced Installation
    * Click on Next
    2. Specify Inventory Directory and Credentials
    * Inventory Directory: /u01/app/oracle/oraInventory
    * Operating System group name: oinstall
    * Click on Next
    3. Select Installation Type
    * Select Enterprise Edition
    * Click on Next
    4. Specify Home Details
    * Name: OraDB10gASM
    * Path: /u01/app/oracle/product/10.2.0/asm
    Note:Oracle recommends using a different ORACLE_HOME for ASM than the ORACLE_HOME used for the database for ease of administration.
    * Click on Next
    5. Product-specific Prerequisite Checks
    * If you've been following the steps in this guide, all the checks should pass without difficulty. If one or more checks fail, correct the problem before proceeding.
    * Click on Next
    6. Select Configuration Option
    * Select Configure Automatic Storage Management (ASM)
    * Enter the ASM SYS password and confirm
    * Click on Next
    7. Configure Automatic Storage Management
    * Disk Group Name: DATA
    * Redundancy
    - High mirrors data twice.
    - Normal mirrors data once. This is the default.
    - External does not mirror data within ASM. This is typically used if an external RAID array is providing redundancy.
    * Add Disks
    The disks you configured for use with ASMLib are listed as Candidate Disks. Select each disk you wish to include in the disk group.
    * Click on Next
    8. Summary
    * A summary of the products being installed is presented.
    * Click on Install.
    9. Execute Configuration Scripts
    * At the end of the installation, a pop up window will appear indicating scripts that need to be run as root. Login as root and run the indicated scripts.
    * Click on OK when finished.
    10. Configuration Assistants
    * The Oracle Net, Oracle Database, and iSQL*Plus configuration assistants will run automatically
    11. End of Installation
    * Make note of the URLs presented in the summary, and click on Exit when ready.
    12. Congratulations! Your new Oracle ASM Instance is up and ready for use.
    Kind regards
    Mohamed

  • Migrate from single instance to RAC manually

    Hi,
    I have a 10g database running in single instance.I have installed grid 11.2.0.2 in two nodes including the node where current instance is running,I have installed 10g again in a seperate mount point in both the nodes .It has the same patches as single instance 10g home.Now how to migrate from single instance to RAC manually.
    Thanks,
    Sekar

    -restore this database into 11g ASM if its not already on ASM.
    -upgrade this database to 11g from 10g on single instance.
    -Now Converting Single Instance on a Cluster to Oracle RAC ,here you have different option to perform this once its 11g database after upgrade.
    using rconfig
    using dbca or manually.
    see detail here
    http://docs.oracle.com/cd/E11882_01/install.112/e24660/cvrt2rac.htm#autoId9

  • Rename asm instance in RAC

    Hello,
    ClusterWare 11.2.0.3 + RAC db same version .
    I need to rename one of the ASM instances
    How can this be done ?
    the situation is as follows , I needed to take one of the server out of the cluster and then bring him back in .
    when I have added him , he got a new ASM instance name (was ASM1 now it got ASM3 , 2 node rac) ,
    thanks
    S.

    Sahar wrote:
    ClusterWare 11.2.0.3 + RAC db same version .
    I need to rename one of the ASM instancesNo you don't. Supply reasons and justification for wanting to changes the SID of an ASM instance,
    the situation is as follows , I needed to take one of the server out of the cluster and then bring him back in .
    when I have added him , he got a new ASM instance name (was ASM1 now it got ASM3 , 2 node rac) ,So? What is wrong with an instance called +ASM3 in a 2 node RAC? How does that now reduce and impair cluster functionality?                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • How to create a standby redolog from rac to non rac ??

    Hi,
    How to create a standby redolog from rac to non rac DR setup..???
    in rac we can create with specifying thread number for each instances..... but this will be replicating to standby ....so how this will act/create on single DR??
    pls help

    854393 wrote:
    Thanks Shivanandha,
    (maximum number of logfiles for each thread + 1) * maximum number of threads
    Using this equation reduces the likelihood that the primary instance's log writer (LGWR) process will be blocked because a standby redo log file cannot be allocated on the standby database. For example, if the primary database has 2 log files for each thread and 2 threads, then 6 standby redo log file groups are needed on the standby database.In maximum performance mode you can keep same number of redo logs but having one more redo log member for each thread is recommended and mandtory for other protection modes.
    How to create a standby redolog from rac to non rac DR setup..???
    in rac we can create with specifying thread number for each instances..... but this will be replicating to standby ....so how this will act/create on single DR??pls help
    Yes, even your DR is RAC or non-RAC, you must have both threads, because each instance information exist on own thread, So to perform redo transition from both the instances, you must have both standby redo log threads even though if it is non an RAC DR.
    Hope This helps.

  • How to clean the windows registry after an unclean install or previous SP2/SP1 uninstall.

    How to clean the windows registry after an unclean install or previous SP2/SP1 uninstall.
    <b>Procedure:</b>
    Run regedit -
    1. Go to HKEY_LOCAL_MACHINE\Software and delete iPlanet folder,
    2. Go to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services delete the entries for :  adminXXX-serv,  iAS60, slapd4.1, slapd-servername.
    Run regedt32 -
    1. Go to HKEY_LOCAL_MACHINE/SYSTEM/ControlSet001/Enum/Root    changed the permission for key LEGACY_SLAPD-xxx from security, and delete it,    check in other controlSet (002/003) also,  including currentControlSet.
    If you are cleaning the Registry after an uninstall, than after cleaning
    registry delete the iAS home dir and "reboot" the computer.

    Sanjeev:
    Maybe you can help. I haven't been able to resolve this one "small" problem which is preventing me from rolling out iWS6.0 SP2. I created a new instance of the server using "Add Server" so that I have 2 Web sites (e.g. test1.domain.com and test2.domain.com), but the 2nd server instance is pointing to the same HTML location as the first (i.e. http://test2.domain.com takes you to the same location as http://test1.domain.com). What do I need to change and where to fix this? Need a VERY quick answer to this to implement a production Web server. I've tried the suggestions made so far (see: http://softwareforum.sun.com/servlet/ProcessRequest?RHIVEID=181&RPAGEID=135&HOID=50B500000008000000966A0000&UCATEGORY_0=_23_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=server+instances&USEARCHCONTEXT_QUESTION_S=0) but nothing has resolved this problem. If you have any ideas at all, I'd appreciate if you could let me know :)
    Thanks!

  • How to copy the ASM files on host filesystem.

    Hello All,
    There is a question come up in my mind that can we perform the copy/delete/move of ASM files to the host filesystem while the ASM instance is down.
    For instance... To copy the file ASM file through AMCMD utility when the ASM instance is running.
    ASMCMD> cp spfilenode.ora /u01
    copying +DATA/NODE/spfilenode.ora -> /u01/spfilenode.ora
    Now my question is, Can I copy/delete/move that file on OS filesystems when the ASM instance is down.
    regards,
    rohit

    Hi,
    1- Copy from ASM to FileSystem using cp command.
    2- Copy from ASM to FileSystem using DBMS_FILE_TRANSFER.
    1) In the first method, when I copy one file, I took more than 1 minute, so the following script would take me more than 1 days (I guess so).
    #!/bin/ksh
    # This script copies files from FRA on ASM to local disk
    ORACLE_SID=+ASM2
    ASMLS=/vasgatedb/app/vsgbkp/asm_ls.txt ##{ASM files list}
    BKP=+data/vsgdb/vsgbkp/`date +%Y_%m_%d` ##{source location of files}
    LOCALBACKUPDIR=/vasgatedb/app/vsgbkp  ##{destination filesystem}
    LOG=/vasgatedb/app/vsgbkp/asm_log.txt ##{log file}
    # Get the list of files
    $ORACLE_HOME/bin/asmcmd > $ASMLS <<EOF
    ls $BKP
    exit
    EOF
    # Clean the list by removing "ASMCMD>"
    sed -i 's/ASMCMD> //g' $ASMLS
    ##cat $ASMLS
    echo `date` > $LOG
    # Copy files one by one
    for FILENAME in `cat $ASMLS`
    do
    if [[ ! -f $LOCALBACKUPDIR/${FILENAME} ]]
    then
    $ORACLE_HOME/bin/asmcmd >> $LOG <<EOF
    cp $BKP/$FILENAME $LOCALBACKUPDIR
    EOF
    fi
    done
    echo `date` >> $LOG
    2) The second method, DBMS_FILE_TRANSFER took me less than 1 second to copy one file completely.
    sys@VSGDB> set timing on
    sys@VSGDB> exec dbms_file_transfer.COPY_FILE('asm_dir','level_0_vsgdb_9998_813844797.bkp','fs_dir','level_0_vsgdb_9998_813844797.bkp');
    PL/SQL procedure successfully completed.
    Elapsed: 00:00:00.38

  • How to delete the BPEL instance in Java code

    Hi all,
    How to delete the BPEL instance which I initiate in Java code?
    Thanks
    Jayson

    Hi,
    take a look here
    http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28986/toc.htm
    Interface IInstanceHandle
    void      delete()
    Delete the instance from the process domain.

  • Recently i have been getting the color wheel a lot and it is screwing with my happiness.  Any thoughts on how to clean the computer up so this stops?

    Recently i have been getting the color wheel a lot and it is screwing with my happiness.  Any thoughts on how to clean the computer up so this stops?

    Back up all data immediately as your boot drive may be failing.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|Previous Sh' | tail | open -ef
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

  • Help while creating ASM instance on rac environment on Linux

    Help while creating ASM instance on rac environment on Oracle enterprise Linux 4 x84_64 Update 5 (10g2).
    a) Installed ASMLib 2.0 Packages
    b) Configured and Loaded the ASMLib 2.0 Packages
    c) Created ASM Disks for Oracle
    d) I can see, three volumes already defined for ASM file system.
    By running following command (on both node), I get following that means disk are detected.
    /etc/init.d/oracleasm listdisks
    VOL1
    VOL2
    VOL3
    But Disk members not displayed for creating disk groups. I even tried to "Change Disk Discovery Path" button and put "ORCL:VOL*" but still no luck.
    Someone told me use, use ADD DISKS button but this button is disabled for me.
    Can anyone, please help me if I missing something.

    *****SOLVED******
    Thanks for reply..
    I set the Change Disk Discovery Path" to /dev/oracleasm/disk/* instead of "ORCL:VOL* and this worked for me.

  • How do shutdown the weblogic server from the command line prompt using web logic 8.1

    I%u2019m currently using weblogic 6.1, but I will upgrade to weblogic 8.1. In weblogic 6.1, the following statements will shutdown the weblogic instance from the command line:
    java weblogic.Admin -url t3://hostname:port -username system -password abc SHUTDOWN
    How do I shutdown the weblogic server from the command line prompt using web logic 8.1.
    Any help will be greatly appreciated.
    Maria

    Maria <[email protected]> wrote:
    How do I shutdown the weblogic server from the
    command line prompt using weblogic 8.1?Greetings Maria! Use this document, located here:
    http://edocs.bea.com/wls/docs81/admin_ref/cli.html#1131733
    Hope this helps...
    Brian J. Mitchell
    Systems Administrator, TRX
    email: [email protected]
    office: +1 404 327 7238
    mobile: +1 678 283 6530

Maybe you are looking for

  • Cost Center association with the free goods Material

    If you are issuing free goods (Material) to your customers or reps could you have the transactions recorded to cost centers.  If so how? Thanks, Marga

  • Can't fix page loading

    Hello, I had several attempts of fixing my troubles - pages not loading properly. I did all suggested steps in help, I have deleted and installed Firefox for several times,... nothing helps. Either parts of pages (like Facebook) or ever mozilla (hist

  • NI 488.2

    Hi, I'm encountring some severe problems after I install NI488.2 software into my WIN2000 system. The problem is , my system is getting restarted in between. To confirm myself, I tried uninstalling NI488.2 and started to work. Everything, just works

  • No tone in Streaming Mode

    Hello, i have 2 Apple TV Boxes wich are connected by WLan over a Linksys WLan Router to the Network. My Steaming Device is a Mac Mini with OSX 10.5.5 the Apple TV Boxes have Firmware 2.2. In the streaming Mode (Movies in iTunes (Version 8.01) on the

  • Acrobat 9pro install

    Hello, I have my Acrobat Pro 9 disk and recently reinstalled to my laptop. When starting acrobat pro, just the word Acrobat comes up on top of the Mac, nothing else happens. When i try to open a document with the open with command, same thing happens