How to clean the Trubrite screen of my laptop?

Any suggestions on how to clean the Trubrite screen of my laptop? There were a lot of ideas given in the web but none of them were convincing enough?

For my computer LCD screen I bought screen cleaning fluid and I use it with a lint-free cloth.
Its a perfect combination ;)

Similar Messages

How to Clean the Command History in SAP Logon Screen

Hi
Can any one let me know on how to clean the Command History (Where we generally enter the T Codes) in SAP Logon Screen.
I dont want to List/see all the Previous command Hits in drop down box.
Thanks
Dan

Hi Eric and Markus,
We found the Solution and off course we did good R & D, Finally I am able to implement the fix to Clear the Command Line History.
All I did is I Disabled the Permissions for Code Folder (Right Click > Permissions > Deny) in Regedit.
Thats It, The Commands stopped storing in the History.
Thank you Erick and Markus.
Rg
Dan

How to clean the dust inside the screen of the iPod Touch?

Hi everybody,
lately some dust entered inside the screen of my iPod Touch.
At first it looked like one or two pixels were gone bad, but it is just some annoying dust.
The problem is that I cannot figure out any way to remove it.
I tried a gentle blow from the connector hole but the result was worse.
Any idea on how to clean the screen inside?
I hope it is not necessary to go to an Apple Center and pay for the "cleaning service".
Regards,
Andrea

It sounds safe to use
'Falcon's® "Professional" Dust-Off® "XL" compressed-gas is the perfect product for removing dust from your color transparencies before making scans or copy slides; it's also great for removing dust from cameras, lenses, computers and other electronic equipment. Each 12 oz. disposable can comes with its own trigger value and a 4.75" nozzle extension (a red tube) that allows you to place precise bursts of compressed air just where you want it.'
Check the directions on the back... also check the contents. Normally anything like that will inform you of contaminants harmful to delicate electrical devices.
If its just compressed air make sure you keep the can well back from the source.. and unplug the G5 (take it somewhere you don't mind dust.. there no point doing this in situe, just for it to suck it back in again!)
Also.. as mentioned.. keep the can upright (as the air is decompressed the can gets very cold)
Stu
Powermac G5 2.5 Mac OS X (10.4.2) 460gb HD 3gb RAM

How to clean the screen guard of iPod Touch!!!

I've installed a screen guard on my new iPod Touch 4G So can you please tell me how to clean the finger prints put on it. Any special cloth or anything

You probably should ask the company that made the screen guard. Otherwise, the microfiber cloth such as is commonly used to clean eyeglasses will probably work.
Regards.

How to clean the surface of my mac book pro?

Howdy. I have a retina mac book pro (I think model doesn't matter). My question is how to clean the surface when it gets dirty. Like to use what kind of cloth and maybe some special cleaners and etc. Someone if you are experienced could you please answer me?
Thanks in advance!

http://www.monstercable.com/productdisplay.asp?pin=2105
Special MicroFiberTM cloth gently polishes your display without scratching it.
Contains a special polymer to protect your display, while reducing static electricity that attracts dust.
Liquid gel will not drip into delicate electronics.
Alcohol-free, ammonia-free formula removes dust, dirt, and fingerprints without damaging your display’s protective coating.
Monster™ iClean™ Screen Cleaner

How to clean the cloth?

My macbook pro came with a wonderful screen cleaning cloth -- it picks up dust fabulously well.
And, Apple tells us how to clean the screen.
My question: what is the safe method of cleaning the cloth !?

machine washable..don't use fabric softner, it will ruin the microfibers. for more info -------->"more like this"

How to clean the dust at charging case

Hi all,
how to clean the dust at charging case rubber....
Cause i have no idea to clean it...
>.<

you can clean it do you have some stickers then remove it and apply to that dust area next again remove it u can clean it like that or use screen cleaning cloths
Do not forget to give kudosand to select the correct answer

How to clean the PSA in NW2004s?

Hello
Does anybody know how to clean the PSA in NW2004s? The PSA screen maintenance is not available anymore
Thanks
Ioan
PS: I read how to clean the active log of an ODS, but did not find anything on the PSA itself

Hello Andreas
I already found where the PSA was --> my question is more on how to <i>clean it</i>.
In the old 3.x, in the PSA management, it was possible to schedule deletion of requests from the PSA (every day for example, for all requests older than 1 week). I haven't found anything similar in NW2004s (yet). I was wondering if this was somewhere.
Does my question make sense?
Thanks!
Ioan

Cleaning the iPhone screen

I just got my first iPhone and am having a blast setting it up and getting things rolling. I couldn't find anything in the search about this except how to clean the screen protectors [which I don't have yet]. So how is the best way to clean the screen?

Julian Wright wrote:
Did you check the manual?
http://manuals.info.apple.com/en/iphoneuserguide.pdf
Julian, the link you provided to the manual is actually a link to an older version of the User Guide, the one for the Original iPhone (thus, it mentions the cleaning cloth as being included, along with the dock).
The correct link is this one:
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
In that current manual, your original page reference (p.46, +before you edited your post+ ) was correct.

How to fill the whole screen of my iMac with the photos included in an iDVD project. (iDVD v. 7.1.2)

How to fill the whole screen of my iMac with the photos I included in an iDVD project. (iDVD v. 7.1.2). I mean, during playing the burned dvd.
When I do "Enter Full Screen", the slide show fills the screen but the photo itself remains in the middle with a wide black border filling the rest.
Any cure for this ?

Hi
In iDVD Preferences - Turn off - TV-Safe area - and the Photos will fill the full area with just letterboxing or pillars as max.
Then "Save as a DiskImage" and test this and see if this plays better - before burning DVDs that's not as You want them.
Bengt W

How to Get the Debugger Screen in WEB Front end of SRM

Hi Gurus,
I have couple of questions for SRM.
1. How to Get the Debugger Screen in WEB Front end of SRM so i can debug the application which is running in EBP system??
2. How to set the flag for external debugging (HTTP)??
3. Using SICF how to set the ITS services ( Like BBPSC01 )for internal ITS so as soon as i place the order it should stop at the break point which i have set in the application.
Thanks.
Regards,
Manoj Tiwari

Setting up Debugging for Integrated ITS
Tcode SICF.
Select service (e.g. default_hostàbcàguiàsapàitsàbbpsc01).
Change service settings and insert parameter ~GENERATEDYNDPRO=1.
Find program to debug. E.g. SE93. Enter bbpsc01 à Display and get Program field (SAPLBBP_SC_UI_ITS)
Execute SE38 and enter program name.
Turn HTTP Debugging ON. UtilitiesàSettingsàDebugging. Click Actv and username.
Add HTTP Breakpoint. Display source code and select Utilitiesàbreakpointsàset.
On External Debugging select HTTP Breakpoint.
Remember to remove breakpoints, deactivate debugging and remove parameter GENERATEDYNPRO.
Can run program RSBREAKPOINTS to find which programs you have breakpoints set in.
Have fun with EBP
If you have any more questions i would be happy to help you. Send me mail on [email protected]

How to Modify the Selection Screen in Report Painter

Hi All,
I am working on Report painter and writer,
can any body helpme how to change the selection screen i.e i want add some more select options to the exisiting roport .
how can i add more select options to the exisiting one
please let me know the Procedure and provide some relevent documents .
Thanks and Best regards.
uma

Hello...
In the program ...we can find the following chunk of code..
selection-screen:begin of block B1 with frame title text-001.
Parameters : ....
select-options:.....
selection-screen:end of block b1.
if we need to add any more user inputs we can write the code inside the existing
selection screen....end of block .
or create a new block ..just the block name should be different...
if we are using select options...we need to declare the table name using the key word for the field on which we are giving select options ....
Tables : BSIK.
Please see the following code:
Imagine :- we have the current selection screen..
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR.
SELECTION-SCREEN END OF BLOCK B1.
we need to add 2 more fields on the selection screen ..this we can do as the following
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR,
                S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE BSIK-BUDAT OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B1.
OR...create a new block...
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS:   S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE RFPDO-ALLGSTID OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B2.
there are many options available in selection screens..like creating check box,radio button etc..
for more info press F1 help on the Selection screen in the ABAP editor
Revert back if not clear and reward if helpful
Regards
Byju

Recently i have been getting the color wheel a lot and it is screwing with my happiness. Any thoughts on how to clean the computer up so this stops?

Recently i have been getting the color wheel a lot and it is screwing with my happiness. Any thoughts on how to clean the computer up so this stops?

Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|Previous Sh' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

What is the best way to clean a soft screen on a laptop

what is the best way to clean a soft screen on a laptop

i dont know what you mean by "a soft screen", but read this: To clean the screen on your MacBook, MacBook Pro, or MacBook Air, first shut down the computer and unplug the power adapter. Dampen the included cleaning cloth with just water and wipe the screen. Do not spray liquid directly onto the screen.
http://support.apple.com/kb/HT3226#portables

How to clean the Stuck Workflow activities in oracle application 11i

Hi All,
Can anyone please give me the steps/Metalink Doc ID about how to clean the stuck workflow activities in Oracle Apps 11i.
Thanks,
Dinesh.

969325 wrote:
Hi All,
Can anyone please give me the steps/Metalink Doc ID about how to clean the stuck workflow activities in Oracle Apps 11i.
Thanks,
Dinesh.Please see old threads for the docs you need to refer to -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Workflow+AND+Stuck&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

How to clean the Trubrite screen of my laptop?

Similar Messages

Maybe you are looking for