How to clear My recently viewed Documents to specific user in BO 4.0

Hi ,
Is their any way of clearing " My recently viewed Documents" in SAP BO 4.0 for specific user or list of users .
Thanks in advance.

Hi Archana,
I think you need to use a Cross Tab on your report but also you will need to apply Sections on the Fund Code dimension.
ie
Section 1 - ABC1
Crosstab
Section 2 - ABC2
Crosstab
Section 3 - ABC3
Crosstab
With regards
Gill

Similar Messages

Jaguar.8 - how to clear menu Recent Folders

searched and found similar question but no answer -
how to clear menu Recent Folders under Go in Finder toolbar?
(no option as in subsequent OSX.)
While at this - how to add item (Utilities folder) to Go menu?
Is this what Favorites is intended for?
Tiger.10 is so much easier on both counts, but haven't learnt for this earlier OSX's finder.
Thanks in advance,
J

Use a tool such as the Property List Editor or TextWrangler to check that application's plist file.
(55345)

How can I get Disco Viewer to remember the user's final filtered worksheet?

Hi every one:
How can I get Disco Viewer to remember the user's final filtered worksheet?
Each time the users login they have to make several operations (drillings, pivots, etc) to get their reports customized as they want. I wonder if is there a chance I could configure Disco Viewer in order to remember the last worksheet layout, and set it as the initial worksheet the next time the user login?
Thanks in Advance
Jorge

Once your users have customised the report to their requirements, they can add the URL of final data diaplay screen to their favourites menu in the browser.
Next time they want to run the same report, they can access the URL saved into favourites, they'll just need to enter their password to run the report when prompted.
I know that this works with Oracle Applications user id's, and that the URL "remembers" User Name, Oracle Apps Responsibility, Workbook Name, and Paramteters Used, Table Layout Customisations, and Page Item selections... so in theory it should record Drill information too.

How can I get Disco Viewer to remember the userÃÂÃÂ´s final filtered worksheet?

Hi every one:
How can I get Disco Viewer to remember the user's final filtered worksheet?
Each time the users login they have to make several operations (drillings, pivots, etc) to get their reports customized as they want. I wonder if is there a chance I could configure Disco Viewer in order to remember the last worksheet layout, and set it as the initial worksheet the next time the user login?
Thanks in Advance
Jorge

Once your users have customised the report to their requirements, they can add the URL of final data diaplay screen to their favourites menu in the browser.
Next time they want to run the same report, they can access the URL saved into favourites, they'll just need to enter their password to run the report when prompted.
I know that this works with Oracle Applications user id's, and that the URL "remembers" User Name, Oracle Apps Responsibility, Workbook Name, and Paramteters Used, Table Layout Customisations, and Page Item selections... so in theory it should record Drill information too.

How do I know what transactions executed by specific user for last month

All
We have a request to find out what transactions are executed by secific user
for last couple of months.
Is there any report in SAP would tell me ?
Please advise.
From
PT.

Hello PT,
If you use the search for the term "How do I know what transactions executed by specific user for last month" then I guarantee you some good hits in the result, and further more detailed search terms to use...
Cheers,
Julius
(this time in response to the correct thread...)

How can I give administration permissions to a specific user+group on wiki?

How do I give administration capabilities to a specific user for only ONE specific group on my wiki server, not all of them.
Anyone know the simplest way to do this?

Really all I'm looking to do is to keep my web site exactly the same but limit the reading and writing capabilities of some users on specific groups/wiki pages/blogs but still allow them to read and write to other specific ones that somehow I would designate.
For example: I'm setting up a group for multiple users (about 15), and they each have their own page within that group, however i want to give them very limited administration capabilities on the site, all I want them to be able to do is to edit their own page, NOTHING else in the group
there's gotta be a way to do this without 3rd party software installation that seems complicated enough on it's own, isn't administration capabilities a fundamental part of wikis?
Someone has to have gone through something similar, any help?

How to clear the recent SAVE locations menu

When I save a new document, a menu of locations appears where I have recently saved other documents. How can I clear this menu? Clearing the Recent Items menu doesn't do it.
I must have inadvertently saved a file to my backup drive once, because the backup folder appears in the menu in addition to the one on my hard drive, and it's impossible to tell these folders apart at a glance — I have to follow the path back. If I inadvertently save a new doc to the backup, it gets wiped out when the automatic backup kicks in. So I need to clear this menu and start over.
(I listed my OS as Tiger, but I see it appears under the Snow Leopard discussion — don't know how to change this. Sorry.)
Message was edited by: Ännchen

Use a tool such as the Property List Editor or TextWrangler to check that application's plist file.
(55345)

(Need Help) how to clear the recently opened file list on Flash Player 11?

excuse me pals, may i ask how to clear recently opened file list under "File" tab on Flash Player 11 (the standalone player) ? i've tried to browse my registry but i can't find the solution (and i can't find the .mru files containg the list). my OS is Windows 7 32bit, i hope i can find solution here

I found it in the Windows registry under HKCU\Software\Macromedia\FlashPlayer

How to get most recently view pages in new tab on the new version of firefox

upgraded to the new firefox and now i cannot get my recently viewed site to show when i open a new tab. the little square that is supposed to turn them on and off is not showing up.

You can check if the new tab is still set to the about:newtab page.
You can check the browser.newtab.url pref on the <b>about:config</b> page.
* browser.newtab.url = about:newtab
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
See also this article about the New Tab page (about:newtab):
*https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites

How to clear the data in my page after user enter submit button

hi......
how to clear the data's in my page after user enter submit button. Actually while pressing first time itself the data is uploaded in database.

Hi Nazeer,
Instead of doing it on the same button better create a separate button for this functionality, As per my understanding you want to clear these fields to create new record so that you can enter a new record so for this you just need to insert a new row in VO.
Still if you want to do it on the same button then you need to put the check that particular record is not dirty if it is not then create new record else create new record.
One more thing if you will clear on the second click of a button how will you update your record??
Regards,
Reetesh Sharma

My wife has a separate User Login. How can she access photos and documents on my User Account?

What do I need to do under my wife's user login so she can have access to photos and documents on my user account?

Move the data you want to share to the hard drive level Users/Shared folder and she will be able to access them. You may have to do a Get Info (command - I) on the folder and add her with read/write permissions, then select the gear at the bottom and Apply to enclosed items.

How to block standard view for a specific user

dear all,
I need to block a specific standard view v_tvbur for a user group.
Which kind of attributes I need to change?
I try to search with transaction SOBJ but i didn't fixed the problem.
Other question: there's other attributes which control the transport request creation on the system? Is it possible to choose the view that I need to consider on a transport request?
Thank you in advance
Enrico

Hi,
What do you mean by changing attributes?
To secure access to certain tables or view tables, use auth Object S_TABU_NAM. Check what authorization group is table TVBUR is assigned ( check in table TDDAT). Don't provide access to the authorization associated with this table in S_TABU_DIS.
Again, what do you mean by attributes that control transport request?
Access to transports can be controlled by auth object S_TRANSPRT.
Hope this helps!
Thanks, Deb

How to send the spool output to the specific user during ALE distribution

Hi All
In ALE internal order Configuration done by BAPI Method SAVEREPLICA Business object BUS2075whenever user changed the internal order which is moved to the destination system because of change data setting in data element fields.
I want to know how to send the spool output of the changed internal order to the specific user during ALE distribution.
Please help me to reslove the above issue
Thanks & Regards
KRISHGUNA

Solved by myself

How to run a Unix Script from a specific user

Hi,
I want to run a GoldenGate related unix script from a super user. I have created crontab enter from that super user. But its still running from root user. As GGSCI cannot be invoked other than super user, the Script is failing.
The Script is running fine on command prompt and from "at" batch job command.
Please give me a way to run the script from a specific user on Cron
Thanks,
Saravana

Hi.
can you show:
grep root /etc/passwd
grep <super user> /etc/passwd (It's not clear for me, what you call super user. For me - root is super user. )
ls -la /var/spool/cron/crontabs
Generaly for add cronjobs for any user need:
crontab -e <username>
For more information - man crontab
Reagrds.

How do I remove "Recent Items" Documents from the apple menu?

I've been searching for an answer to this question for the better part of 3 hours now. W
Several iterations of osx ago, there was the ability to separately limit how many recent items were shown for Applications, Documents and Servers. Over the years, I simply installed a newer version of osx on top, and surprisingly my recent items always eliminated the Documents from the list.
I've since done a clean install of mavericks after installing an SSD, and i've lost this small but important part of my work flow. No matter what I've tried to remove the documents from Recent Items, it always shows up. I can still boot into my old HDD (which is now installed as a supplementary drive and also updated and running mavericks 10.9.2), and see from clicking on the Apple Menu > Recent Items that it only displays Applications and Servers.
Try as hard as I can, I can't simply figure out how to remove the documents from the recent items menu. I've tried editing the com.apple.recentitems.plist file, to show 0 items for documnets, but this never seems to work. (I've since read that this file is simply rewritten on logout.) Strangely, if I go into the old setup System Preferences, Recent Items: it is showing as None. I also suspect that maybe I used Tinker Tools or some other utility to change some command line preference (using the gui) several years back. Not sure how I could investigate what would need to be done to compare files or otherwise figure out how to remove the documents section from the recent items menu.
It's starting to drive me crazy. Anyone?

The Apple menu is at the top left hand corner of your screen, click on it and about this Mac is the first choice.
Click twice on Version to get serial number.

How to clear My recently viewed Documents to specific user in BO 4.0

Similar Messages

Maybe you are looking for