How to close CRM-Activities via Mass Maint,

Hi,
I want to 'close' about 1000 activities in our development environment. Is there a Mass Maint. (like in R/3 tcode MASS) exists in CRM.  What is the best way to close (set status to close) these activities?
Thanks
Naved

Hi and Welcome to the Community!
Unless I'm missing it in your post, I do not see that you have also installed, to the PC, the required software?
http://us.blackberry.com/software/desktop.html?LID=us:bb:software:desktopsoftware&LPOS=us:bb:softwar...
You must do so in order for the necessary drivers to be installed to the PC, so that it can communicate with the BB via USB. This also should enable USB charging from the PC.
Also, this KB has more complete instructions (which vary by BB OS) as to enabling/disabling Mass Storage Mode on the BB:
KB13564 How to enable or disable mass storage mode on the BlackBerry smartphone.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • How do we make automatic and mass transports via Solution Manager

    How do we make automatic and mass transports via Solution Manager ..
    how can we do this is there any specific procedure please let me know
    Regards
    Karthik

    To attempt a new chat session...
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    http://helpx.adobe.com/x-productkb/global/service1.html

  • How to close MASS PO

    Hi,
    I was trying to close STO No.s by the T-code--MEMASSPO, but the system is not allowing as there are some delivery created but no PGI has been done. I have 150-200 ine items in a single STO. So its impossible for me to delete the delivery no. from each STO. Kindly advise how to close the STO fully irrespective of delivery created or not.
    Thanks In Advance
    Satya

    you are trying to create inconsistences, this is not allowed by SAP. 
    What do want to do with the deliveries that are not yet goods issued? shall they stay forever, or accidently used in future?

  • Mass Maint. of price list  categories

    Please explain the uses of  'Mass Maint. of price list  categories' option in PFCG -> utilities.

    Hello Keerti,
    I have never used the assignment of licenses via roles since it doesn't fit in our licensing concept,
    but:
    1) I think there will be now difference except the way how you assign the license
    2) I would prefere user licensing...
    For sap a user typically has one role that describes all his activities. But in our small company we have many user with acivities cross applications. So we cannot use sap standard role concept. Instead I have created a structure based on our company organization and use multiply roles to combine a end user role.
    Think also about DUMMY users (for example for background processing or mailing) - normally these users need permissions for the corresponding applications but you will license them as test users.
    3) when you look at the predefinied values you will see that there is not really a great number of preassigned roles
    4) you can add your own roles to the list of license/role assignment
    5) no idea, just try..

  • URGENT- SERVICE ORDER CLOSING IN MASS MAINT...

    Dear Guru
    in our plant there are severat old service order which are pending to close
    there is no item code or service no. in order
    IS THERE ANY MASS MAINTAINANCE FOR SERVICE ORDER CLOSING.
    urgent required
    DEV...

    Dear
    for mass maint required a table name but we have no material code so how to get it pls define steps for the same.
    regds
    dev...

  • How to close a custom form from CUSTOM.pll

    Dear Friends,
    We need your help on the following issue related to Oracle Apps Forms.
    We have a requirement to show a popup message (message should remain open and user should be able to continue working in the order entry form. User use this message as a reference while entering order details) when user enters a customer name or number in the order entry form . This is similar to the Stock Availability form which gets opened automatically when control enters into Order Entry Lines form, where the stock availability form remains open while entering line details.
    To fullfil the requirement, we have designed a custom form with a single text field in which the message text (some customer information) will be shown.
    We are using custom.pll to call this custom form (thru FND_FUNCTION.EXECUTE) when the control leaves customer number field. User could leave this custom form open and continue with entering order details. Till this point we could achieve what we want. i.e. we could show the popup message in the custom form after user enters a customer number.
    The problem is, after the custom form is opened, when we enter a new order for different customer, we need to close the custom form (which is opened for the previous customer) if the customer is not qualified.
    we could not achieve this. We tried using CLOSE_FORM, CLOSE_WINDOW, but did not help.
    Any body have any suggestions on achieving this... Basically, we need your help to know how we can close the custom form from CUSTOM.pll.
    Thanks,
    Uma

    I thing you haven't any (supported) option to close a form via custom.pll.
    For a long time, we have search a solution for the same problem without any result.

  • Close Sale Orders via DTW

    Hi,
    I want to close Sales Orders using DTW but I got an error:
    Document rows Cannot be closed concurrently.
    I read some threads:
    Link: [Document rows Cannot be closed concurrently - Purchase Orders;
    Link: [How to close a row in a Sales Order?;
    Link: [Closing Order rows;
    Link: [Documents rows cannot be closed concurrently with the other document modify;
    and many more but couldn't solve problem.
    I work on 8.8 version and try to close Sale Order that has few rows. I can close line via UI ( right mouse button and choose close line) but when I try to do it via DTW I have an error.
    I disabled all formatted searches and it didn't help.
    Need help.
    Reagrds
    Szymon

    Hi,
    the problem now is not the error message. The problem is: what about the sales order which should be lost after we regenerate the program RSM13000?
    We installed the following support packages:
    1.     SPAM and SAINT      from 26 to 38
    2.     SAP Basis:           From SAPKB62047 to SAPKB62068
    3.     SAP_ABA:          SAPKA62047 to SAPKA62068
    a.     And 2 CRT
    4.     SAP_APPL          SAPKH47022 to SAPKH47033
    5.     SAP_HR:          SAPKE47024 to SAPKE47099
    6.     SAP_IPPE:          SAPKGPIA06 to SAPKGPIA28
    7.     PI:               SAPKIPZI55 to SAPKIPZI59  
    8.     PI_Basis:          SAPKIPYI57 to  SAPKIPYI59 
    9.     ST_PI:               SAPKITLQG7 to SAPKITLQG8 
    10.     EA_APPL:          SAPKGPAA06 to SAPKGPAA29
    11.     EA_FINSERV:          SAPKGPFA06 to SAPKGPFA29
    12.     EA_GL TRADE          SAPKGPGA06 to SAPKGPGA29
    13.     EA_HR               SAPKGPHA10 to u2026u2026  SAPKGPHA99
    14.     EA_PS               SAPKGPPA06 to SAPKGPPA29     
    15.     EA_RETAIL:          SAPKGPRA06 to  SAPKGPRA29
    Thanks in advance
    Hanseatik

  • How to close external programs?

    Hi there,
    in vbs is a command "ExtProgram(ExtProgramName, ExtProgramArg)" to
    start external programs. But how to  close external programs when
    they finished its work? Is there a vbs-command for it? Is there a way
    when calling "cmd.exe" with a proper parameter?
    Martin Bohm

    Hello Martin!
    Yes, with the tool 'tasklist' in the same directory.
    The problem is that it is not easy to query from script. I tried it in the following script. Perhaps not perfect espacially because a command interpreter pop up every time you call the function.Option Explicit
    If IsDIAdemRunning() Then
    Call MsgBox( "At least one DIAdem is running!" )
    Else
    Call MsgBox( "No DIAdem at all!" )
    End If
    Function IsDIAdemRunning()
    Dim oWshShell
    Dim oExec
    ' Execute via Shell Object
    Set oWshShell = CreateObject("WScript.Shell")
    Set oExec = oWshShell.Exec( "C:\windows\system32\tasklist.exe /FI ""IMAGENAME eq DIAdem.exe""")
    ' wait until tasklist is finished
    Do While oExec.Status = 0
    Pause(1)
    Loop
    ' no Standard Output -> no DIAdem running
    IsDIAdemRunning = Len(oExec.StdOut.ReadAll) <> 0
    End Function
    A better solution might be possible via WMI.
    Matthias
    Matthias Alleweldt
    Project Engineer / Projektingenieur
    Twigeater?  

  • Process For Close pending PO by mass Maintence

    Dear All
    Can any Tell Me the  step by step process For Closing the pending Purchase order For last finacial year   & Purchase Requisition through Mass Maintence.
    Rgds
    Pankaj Agarwal

    Hi Pankaj,
    Goto T:code MASS select object BUS2012 for PO enter po numbers & find for field "Del complited Indicator" & close tick that by entering value "x".
    We can't close Purchase Requisition in this fashion via MASS only way is via LSMW to close all PR's.
    Regards
    Rang

  • I am having problems transefering contacts to my I pod when syncing the message comes back with contact in use by I pod please close and try again, please could you let me know how to close contacts on the  pod or is there a setting that is wrong etc,

    I am having problems transfering contacts to my I pod when syncing the message comes back with contacts in use by I pod please close and try again, please could you let me know how to close contacts on the  pod or is there a setting that is wrong etc, i have restored the device. if i go to contact via settings the screen comes on for about 2 seconds and then goes off - Help

    Single click on the Home button. Then double click on the Home button. In the recently used row, touch and hold the Contact app till they start to wiggle and then tap the minus sing by the contacts app.
    Also make sure the Contact program on your computer is closed.

  • RH_UPDATE_DATABASE issue: how to close prompted  information

    hi
    i use RH_UPDATE_DATABASE to update HR OM mass position  data! but will get message when some error or information occur.
      CALL FUNCTION 'RH_UPDATE_DATABASE'
        EXPORTING
         VTASK     = 'D'
           VTASK     = 'S'
        EXCEPTIONS
          CORR_EXIT = 1
          OTHERS    = 2.
    how to close message prompted! when program running!
    thank you very much!
    waiting online!!!

    try passing the value of VTASK as 'B' . this should work .
    Thanks,
    Aditya. V

  • TypeKit Update. How much closer to opening up the whole library?

    Nearly two years ago there was a spirited discussion here about TypeKit fonts and how only a limited number of them can be used with Adobe Muse. Admittedly, there are a few hundred  typefaces available, but if you need a specific font -- because, for instance, you have to conform to a corporate branding program -- you're effectively out of luck.
    In 2012, the official word was that this was an acknowledged issue and would take time to work through the hurdles, both technical and legal.
    So now that nearly two years have  elapsed, I'm wondering how much closer we are to expanding the entire TypeKit library for use in Muse. This is an issue that has come up for me a few times in building client sites and it's getting to be an untenable obstacle.
    For what it's worth, I've seen that there is a "less than optimal" non-WYSIWYG workaround, which is described here at Muse Insider. Could Dani be induced to do one of her Muse Jam Sessions on this topic and walk us through whatever workarounds are currently available to subscribers? I'd love to see this in action before attempting it myself.
    Anyone from the Muse team care to update us?
    Thanks.

    Frankly we wildly underestimated the demands that were going to be put on the Typekit team as a side effect of the acquisition. They've been buried for the past two years integrating with Adobe's infrastructure, enabling their website for the broad set of languages supported by Adobe products, implementing the new Desktop Sync functionality, and no doubt doing a lot of other high priority stuff I know nothing about. All those activities were ranked as higher priority than work on a Muse-specific integration, since they benefit a larger portion of the Creative Cloud subscribers. Now that Desktop Sync and the infrastructure and language support work is well underway or completed, we're actively working to re-engage with the Typekit team to provide deeper integration with Muse. Still no ETA (other than to say it won't be part of the release due out later this quarter), but we have not forgotten the need for access to a much broader base of high quality Web Fonts.

  • Using Office 365 - how to close sub folders in iPhone-mail app.

    using Office 365 - how to close sub folders in iPhone-mail app.

    Isn't HotMail still POP3 mail only (i.e. no IMAP support)?  If that is still the case, then your device is working correctly.  The folders you made are a feature of the web tool for hotmail, and are not part of the POP3 supported email protocol.  Only IMAP mail supports on-server mail subfolders, and those can be accessed from the iPhone mail client.  But POP3 is limited to the inbox solely, as that is literally the only folder that sits on the mail server (your others are on Microsofts web server and supported via the web mail tool).

  • How to close apple account, please?

    Hello,
    How to close an apple account, please?
    If it not possible for good then it will be for bad. I will force Apple to close my account.
    Regards.
    P.S.: I HATE APPLE.

    Here's what the iTunes Store has said about cancelling an account (paraphrased from an email to another poster):
    There are a couple of options that will allow you to retain full access to your purchases while preventing your account from being used to make additional purchases:
    1) You can remove your billing information from your account at any time so that it can't be used to make purchases. By doing this, you retain the ability to authorize computers to play the items you have purchased with the account, and you will still have the account open in case you decide to use it later. To remove the billing information while keeping the account open, go to the Store menu in iTunes and choose View My Account. Log in, go to Payment Information, and in the credit card area choose the "none" option.
    2) Apple may be able to disable your account, which will prevent it from being used to make purchases, but you will still be able to use the items you purchased with the account.
    It is possible to cancel the account (or at least Apple has done so in special circumstances in the past), but you will lose the ability to re-download or update any items you've already purchased from the iTunes Store, or to authorize any existing or new devices to use that contant. For example, if your computer is repaired, you may not be able to reauthorize the computer to play your purchases after the repair. Also, you wouldn't be able to authorize computers that were not already authorized before you canceled the account. You may sign up for a new account in the future, but your new account will not play any of the songs or videos purchased with the canceled account (and you can't reactivate the canceled account). You should not cancel the account if you want to be sure you can continue to use your iTunes Store purchases. I therefore strongly recommend either just removing your billing information or disabling the account as described above.
    If you really insist on asking Apple to disable (or cancel) the account, you'll need to send a message to the iTunes Store via their contact page:
    http://www.apple.com/support/itunes/contact/
    specifying if you would like it disabled (or canceled). They should then respond with additional information (some of which I've given above).

  • How to close profit centre

    Hi,
    i want to close profit centre , how to close and what are the criteria to do that
    Thanks in Advance
    Prashanth

    Hi,
    You can lock it via KE52 (Indicators Tab).
    Regards,
    Eli

Maybe you are looking for