How to completely remove Application Manager 6

...and all associated files so I can reinstall it.
Here's the issue. The Application Manager on my Mac running 10.6.8 will not launch or update or install manually. This is the second time this issue has occured. The first time I was able to locate instructions as to how to completely remove it but I lost that link so I'm looking for some help.
Thanks!

To remove the Application Manager run the Cleaner Tool and from the drop-down in the top right choose Creative Cloud. Then select Creative Cloud Installer and click the button for 'Cleanup selected'. Then next time you try to download an application from the Creative Cloud Apps page (https://creative.adobe.com/apps) you will be asked to download the Application Manager again. An alternative place to get the Application Manager for Mac is from here http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774.
I just ran through these steps on my Mac laptop and they worked.

Similar Messages

How to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch

how to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch

There's not much sense in purchasing a Mac to run only Windows on it. Keep in mind that drivers for Windows are a secondary concern for Apple. While Windows will typicall run fine, things like power managment are not optimized under Windows (you'll get less time on battery while running Windows). You will also not be able to install firmware updates. Firmware updates might be necessary whether you run Windows or OS X as they are updates to the code in your hardware and are not OS-specific. You must be running OS X in order to install a firmware update. You can do this even if you boot off of an external drive with OS X installed on it. At the very least, you should keep just a small partition for OS X on your internal drive.

How do I get Application Manager to recognize that Photoshop is not installed?

Application Manager says that Photoshop CS6 is installed. It isn't. I've rebooted the Mac and it still says it's installed. What installed was a partial or corrupt file which I have trashed. How do I get Application Manager to recognize that Photoshop is not installed so I can download and install it again? Thanks.

Do you have an uninstaller available to you in the Applications/Utilities/Adobe Installers folder? If so then please run the uninstaller.
If you don't then please utilize the uninstallers available in this folder to remove all currently installed Adobe Creative Software. You will then want to follow this by running the CS Cleaner tool. You can find details on the use of the CS Cleaner tool at CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

How to install Adobe Application Manager?

How to install Adobe Application Manager? I downloaded it, but can't install.
Just purchased the CC for photographers. Have been using Photoshop since version 3.
I have been studying your support docs for several days and have no business messing around with something called, .gz files and installation logs. Totally unsuccessful "Updating" my CS6 or CS6 bridge or Extension Manager or the Adobe Support Advisor by the CC Desktop.
Have no Photoshop CS6 because I followed your CC support instructions.
Uninstalled my CS6 today so I can finish a job tomorrow. Bad decision on my part because I can't reinstall it and am unable to correct
this problem.
I was able to use CC to update LR, but am absolutely too afraid to touch it now.
I have been waiting inline for Chat also, but the numbers ahead of me are going up.
If someone in this Community forum can help me, it would be fabulous.
Thanks very much.

Uninstalled Creative Cloud.
Downloaded it again - 4th time.
Deleted a AAMDetect file from the Library/Internet Plug-ins
Downloaded and installed Adobe App Manager and an icon for it is on my Desktop
Installed Creative Cloud.
OK.
Now how do get my Photoshop CS6 back before I download Photoshop CC?
CS6 is not listed in the available Apps in the CC Desktop.
Support wait time right now is 2 hours by phone.
After sitting on Chat yesterday only to see the people "waiting ahead of me" go from 17 to 18, I gave up.
Please advise.
Thanks again.

Anyone using rdiffweb - how to completly remove it?

I know rdiffweb uses sqlite so there must be some db's somewhere. I'm wondering how to completely remove all traces of rdiffweb from my system including the database. Using pacman will remove the pacman-insalled files, but there is a config script that needs to be run to start using rdiffweb so it'll create files outside of pacman
Last edited by graysky (2010-08-16 08:59:18)

Do a locate for rdiffweb, its folders are probably named after the program.

How to completely remove McAfee

How can I completely remove an old non-functional McAfee virus protection app from my MacBook Pro? It seems that a ghost of it still appears at the top of the screen on the upper menu bar. I'm thinking that there may be other (hidden) components that could safely be removed too.

There should be an uninstaller in the Applications folder. However, if McAfee was removed improperly, by simply putting all the McAfee apps in the trash, then it may be gone. In that case, you have two options:
First, log in as an admin user (if you aren't already using an admin user account) and try executing the following command in the Terminal:
/usr/local/McAfee/uninstallMSC
There is a hidden Unix shell script there that will uninstall components of McAfee. When it runs, it will ask you for your account password. When you type it, nothing will appear in the window... that is normal, just type it anyway and press return.
If the Terminal complains with an error message saying "No such file or directory" that means this script is no longer present. In this case, you will need to try reinstalling McAfee, then remove it using the newly-installed uninstaller, found in the Applications folder.

HOW DO I REMOVE APPLICATIONS FROM WLS6 CONSOLE?

Hi everybody,
I compiled an ejb into a jar file and ADDED it to the list of already
added applications through the WLS6 console (I have WLS6 installed on my Windows
2000 machine).
In the WLS6 console I clicked Deployments->EJB->Install a new EJB->Upload
(to add a new ejb jar file).
Now I wish to REMOVE (uninstall) this ejb from the list of added
(installed) EJBs.
I tried to delete the jar file from the WebLogic folder where this
jar file was stored, but when I restarted WLS6 it displayed a panic that it was
unable to find the EJB component. So I had to undelete the jar file from the Recycle
Bin to the same WebLogic folder.
What I conclude is that although the ejb component got removed it
did not get UNINSTALLED .i.e some references to the jar file stayed on somewhere.
How do I remove and UNINSTALL my ejb?
Thanks in advance. As usual I am posting this everywhere to get attention.
As usual sorry for the multiple postings.
snodx

Manual method:
Stop the server. Back up anything important.
There is a config.xml file that has an entry that points to your JAR. Delete
this entry.
There is your JAR file. Delete this JAR.
There is data from/about your JAR in "do not delete" directory. Delete the
directory that says "do not delete".
Peace,
Cameron Purdy
Tangosol Inc.
<< Tangosol Server: How Weblogic applications are customized >>
<< Download now from http://www.tangosol.com/download.jsp >>
"snodx" <[email protected]> wrote in message
news:3b5bdc84$[email protected]..
>
Hi everybody,
I compiled an ejb into a jar file and ADDED it to the list ofalready
added applications through the WLS6 console (I have WLS6 installed on myWindows
2000 machine).
In the WLS6 console I clicked Deployments->EJB->Install a newEJB->Upload
(to add a new ejb jar file).
Now I wish to REMOVE (uninstall) this ejb from the list ofadded
(installed) EJBs.
I tried to delete the jar file from the WebLogic folder wherethis
jar file was stored, but when I restarted WLS6 it displayed a panic thatit was
unable to find the EJB component. So I had to undelete the jar file fromthe Recycle
Bin to the same WebLogic folder.
What I conclude is that although the ejb component gotremoved it
did not get UNINSTALLED .i.e some references to the jar file stayed onsomewhere.
>
How do I remove and UNINSTALL my ejb?
Thanks in advance. As usual I am posting this everywhere toget attention.
As usual sorry for the multiple postings.
snodx

How to access Oracle Application Manager

Dear All,
I have installed EBS R12.0 in Oracle Enterprise Linux Release 4 environment. Through browser I am able to login using sysadmin username and password however I am unable to find Oracle Application Manager or AutoConfig option any where. Can any of you please tell me how I can enable or access OAM.
Kindly mention the step by step procedure.
Regards,
Asif

Hi Asif;
I have installed EBS R12.0 in Oracle Enterprise Linux Release 4 environment. Through browser I am able to login using sysadmin username and password however I am unable to find Oracle Application Manager or AutoConfig option any where. Can any of you please tell me how I can enable or access OAM.For OAM:
Login as sysadmin >> System Administrator>> Oracle Applications Manager (There are link under this)>> click dashboard then u will see Site map top of page click it
you will see System Configuration>>AutoConfig there
Regard
Helios

How to repair the Application Manager?

I installed the TCS 4, but the Adobe Application Manager refuses to start and prompts me to reinstall because it "is damaged". But even after installing the latest version available, the problem persists. What can I do? (Win7, VM) Any help appreciated.

Please follow the mentioned steps:
1. Go to the mentioned path: C/ Program Files(X86)/Common Files/ Adobe/ and rename OOBE/Caps/Backup. Download AAM and try to install.
2. Run the cleaner tool to remove any previous instance of AAM and try to install it.

Failed installation: How to rerun Adobe Application Manager updates for Photoshop CS6

Hi.
The installation of Adobe Extension Manager CS6 failed - while 2 others update for Photoshop CS6 did intall. I was installing Adobe Reader X .
That's why I discovered the notication from the application manager about updates for CS6 - and I just confirmed that as well.
Apparently the Reader installation blocked only the update installation of Adobe Extension Manager CS6 - saying another installation process was running ... such stuff happens sometimes.
However, it seems Adobes Application Manager update module does not track its failed installations? It does not automatically advertise that update has not been installed and notifiying me again to install it. At least not immediately ...
So how do I rerun the Adobe Application Manager update moduel to check for updates manually?

You go Photoshop CS6 > Help > Updates ...

How to completely remove safari and all its files?

I have Windows Vista and I need to COMPLETELY remove Safari and ALL its files. It is important that it is completely removed, and I've already tried simply uninstalling (from "uninstall a program" in the control panel)it but it doesn't get rid of EVERYTHING safari. I think some of the files are damaged or something because Safari won't open. How would I do this?
Message was edited by: Friends of Apple

Just go into Control panel and Uninstall programs. Select Safari and select uninstall.

How to completely remove Apple's Java 1.6?

During the couple of days that the Java plugin 1.7 was blocked from the Safari browser, I ended up installing Apple's Java 1.6 to get Safari running Java (after the multiple system pop-ups that I need to install a 1.6 runtime). After Java released 1.7.0.11, I installed the the JDK from their site. This however, did not remove Apple's version and the 1.6 JDK is still in my directory with a gazillion symlinks strewn across the directory (created at the time of Apple's Java was installed) linking to files within Apple's version. How can I go about completely removing Apple's 1.6 (besides for reformatting my Mac)?

VicT77 wrote:
During the couple of days that the Java plugin 1.7 was blocked from the Safari browser, I ended up installing Apple's Java 1.6 to get Safari running Java (after the multiple system pop-ups that I need to install a 1.6 runtime). After Java released 1.7.0.11, I installed the the JDK from their site.
Unless you are a Java developer, you didn't need the JDK and should have just installed the JRE.
This however, did not remove Apple's version and the 1.6 JDK is still in my directory with a gazillion symlinks strewn across the directory (created at the time of Apple's Java was installed) linking to files within Apple's version. How can I go about completely removing Apple's 1.6 (besides for reformatting my Mac)?
It is not unusual to have multiple Java versions installed on a Mac. That has been going on for a very long time.
Still, even Oracle recommends removing older versions, but then only offers an uninstall solution for windows.
I have never seen an authoritative set of instructions for fully removing 1.6. There are some instructions for disabling it on MacFixIt from last spring http://reviews.cnet.com/8301-13727_7-57408841-263/, but removal instructions begin by saying "Unfortunately there is no direct or easy way to uninstall Java, so once installed the only way to remove it and all of its components completely is to reinstall OS X."
After some discussions yesterday with another user, it was determined that even doing a clean install of OS X will include some Java 6 elements, although not the browser portions. I have no idea what functions these elements perform, other than alerting you that you when you need to install something, but they will still be there.

How to completely remove SSRS services from a sharepoint farm?

Hi There !
We are planning to completely remove a previous version of SSRS that was installed as integrated mode on our server.
Can someone please help with the exact steps involved !
Thanks in advance!

HI,please check the link below that explains in details of how to remove the shared features from SQL.
http://expertsharepoint.blogspot.de/2014/03/remove-of-shared-feature-in-sql-2012.html
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

How to completely remove the Creative packa

I've been dealing with an ongoing issue with my Audigy2 Platinum since upgrading from W2K Pro to XP Pro. Initially, everything worked well, however, when I opted to use the WebUpdate, things rapidly fell apart... I manually removed the folders and entries in the registry, and tried re-installing, to no avail. I was able to at least access the EAX, speaker settings, and mixer from the task bar icon, but... since last updating the drivers, even that is gone, tells me the programs are not installed. I've used the repair feature on my install CD, same problem. Diagnostics tells me that only the hardware and Directsound are working, everything else fails, running the fix has no effect...
What I need to know is a method to COMPLETELY remove everything regarding the sound card from my system, including the card, and then installing it once more, and hoping beyond hope that I can once more be able to use my card. As it stands now, regardless of what settings I employ in the Windows sound panel, only the front channels and the subwoofer work. The rest of the speakers do "hiss", but no sound is coming from them... Before updating the drivers, I was at least able to set things to 5., and get some sound from the speakers, and could use the EAX, mixer, and speaker settings panels, now I am stuck with only an effecti've 2. system regardless of what I do...
Short of resorting to formatting and installing everything from the ground up, which isn't a viable option, how can I go about getting this confounded thing working as it should once more?
Incidentally, the original issue cropped up nearly a year back, and contacting tech support resulted in the "cut and paste" responses. Remove driver, reinstall... did that, problem persists... Try option B... did that, problem persists... Remove driver, reinstall... did that, problem persists... Try option B... did that, problem persists... This went on for over a week until I finally got fed up and just li'ved with it. A recent game installation required me to update the drivers again, and this time, the webupdate did so, however, as a result, I effecti'vely have lost 95% of the capability of the card.
Please help, while I still have some of my hair left here...
Belgarius

Yes, that sounds quite familiar. Under W2K, things worked well, although I rarely used anything outside the speaker settings, EAX, and mixer, the rest of the package was there, and appeared to work. Once I upgraded to XP Pro, things still appeared functional, at least those parts I routinely used. As a part of the update, I set about updating other items, such as the software/driver packages for the Audigy, and that's where the fun started. Once I completed the "web update", the system hard locked on rebooting, and once it was restarted, I noticed right away that my sound was hosed. I started checking, and found that nearly all of the program apps were missing. Well, not exactly missing persay, but the links led to shortcuts instead of ap
ps.
Once these shortcuts were inspected, I had the same "empty exes" that you mention. Making a long story short, I eventually wound up uninstalling and reinstalling the drivers several times in order to get the taskbar functions back for some of the card's features, but none of the apps ever reappeared.
Recently, I installed a new game which required me to update to the latest sound drivers. I did so using the webupdate once more, and this time, it finished up without incident, however, I no longer have any controls available, and those mentioned in CTPanel, which is present now, are greyed out, and have no effect. Instead of my 6. system, with EAX and effects, I now effecti'vely have a non-EAX card, with only 2. for speakers.
This coming weekend, I plan to go through the process outlined in the link provided, and see if I can at least get the base features of the card back. I was considering doing a complete format, but this is a bit much, especially in light of the fact that only the sound has been effected. Your mention that you have already went this route with the same results has led me to think that the problem lies somewhere with the software and XP. I'd really hate to have to go through the aggravation of restoring the system, and since a good bit of it would be from backups, I would no doubt restore the initial problem.
It's sad that such a great product as the hardware is, apparently has some serious issues with either the software (many others have similar complaints) the OS it runs under, or both... Personally, I can do without the Media center and the rest of the software, but I do want the features of the card to at least function. I could have simply stayed with my old card and speaker setup, and saved myself a few hundred sheckles, and still have had about the same sound features as I now have...
I've worked with computers for years now, and this is undoubtedly the most perplexing, and vexing issue that I have had to date, and that includes administering a network running Windows NT, 3., DOS, Clipper, and beta releases of 95...
Sigh...
Belgarius

How does Grid Control Application Management Pack (AMP) discover targets?

I have Grid Control 10.2.0.4 install and am trying to discover Oracle 11i applications. I have applied the patches required to the OMS and the agents and can see the Application Management tab at the top of the targets page. I am able to discover the individual components of the application (i.e. Apache, listeners, database, agents, hosts, forms, etc) but when I go under the Application Management tab and try to discover the Oracle applications I get the following error message:
Error creating Node target for ctx file /ssan/ap00/appl/admin/ssan_ssan.xml; Error:Refresh EMDClient for
ssan.rtd-denver.com
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTDiscovererPreFusion.discoverTargetsForNode; Waited for five minutes, but unable to find
Targetssan-Forms_ssan_ssan(oracle_apps_forms_svlt) in Reposiotry Possible reason - agent: https://ssan.rtd-denver.com:3872/emd/main/ has not uploaded
this target in repository
I have the following in the ebsDiscovery.log
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com 7 targets Found to be saved.
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Convert to Target Isnatnce Name = ssan-Forms_ssan_ssan,oracle_apps_forms_svlt
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Convert to Target Isnatnce Name = ssan-Apache_ssan_ssan,oracle_apps_apache
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Convert to Target Isnatnce Name = ssan-JServ_ssan_ssan,oracle_apps_jserv
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Convert to Target Isnatnce Name = ssan-Forms_ssan_ssan,oracle_apps_forms_svlt
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Convert to Target Isnatnce Name = ssan-Apache_ssan_ssan,oracle_apps_apache
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Convert to Target Isnatnce Name = ssan-JServ_ssan_ssan,oracle_apps_jserv
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Convert to Target Isnatnce Name = ssan-Discoverer_ssan_ssan,oracle_apps_discoverer
oracle.apps.fnd.oam.em.sdk.targetData.discovery.ProxyTarget.registerWithEMAgent _methodAccess = 4 Calling lEMDC.saveTarget
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Out
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTDiscovererPreFusion.discoverTargetsForNode refreshSubsystems for node = ssan-:Infrastructure ssan_ssan:APPL_TOP Context
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.checkTragteUplodedFromAgent ssan-Forms_ssan_ssan(oracle_apps_forms_svlt) is Uploaded in Rep=false
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.checkTragteUplodedFromAgent Waiting for target ssan-Forms_ssan_ssan(oracle_apps_forms_svlt) to be uploaded in repository. (wait itme 10 sec)
I have the white paper explaining how Grid Control discovers databases, listeners, application servers, etc. But I am not able to find a paper that tells how the Application Manager discovers the Oracle applications. Does anyone know of such a paper or which perl scripts are run?

One of the biggest problems I have run into when doing these discoveries is that the agent and iAS and/or Oracle are owned by different users and the agent does not have permissions to read the configuration files.
You situation may be a bit different.
If the host is real busy, it sometimes takes a long time to load the gathered information into the repository. From looking at your log file, this may be your issue.
How busy is the server(s) and database for you OMS and OEM database?

How to completely remove Application Manager 6

Similar Messages

Maybe you are looking for