How to complie database link in forms 6i

Dear All,
how can i compile database link in forms 6i ??
Mujtaba

follow the below step to connect database from 6i forms.
Open C:\orant\net80\admin\tnsnames.ora in notepad as below.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = servername)(PORT = 1521))
(CONNECT_DATA = (SID = ORCL))
)look orcl as above in host put your servername or IP address where database installed . restart the pc and connect with scott/tiger@orcl.
Hope it helps.
Regards
Moazam

Similar Messages

How to install database 10g and forms&reports developer 10g?

hi
how to install database 10g and forms & reports developer 10g on windows xp 32 bit? and which one is to install first? how to connect them together? where can i find complete guide

Gul wrote:
hi
how to install database 10g and forms & reports developer 10g on windows xp 32 bit? and which one is to install first? how to connect them together? where can i find complete guideThis link will help you http://tahiti.oracle.com/

How to create database link from oracle to sql server

Please help with how to create database link from oracle to sql server
Best regards,
Vishal

Please help with how to create database link from oracle to sql server
Best regards,
Vishal
Hi Vishal,
I found a lof of information regarding how to create a database link from Oracle to SQL Server, please see:
https://www.google.co.in/?gws_rd=cr&ei=vd3XUvGFO8TgkAXqlYCADg#q=how+to+create+database+link+from+oracle+to+sql+server
We discuss SQL Server related issue in this forum. If you have any more question regarding Oracle, please post it in Oracle communities forum for better support.
Regards,
Elvis Long
TechNet Community Support

How to create database link between oracle9i database and oracle10g

How to create database link between oracle9i database and oracle10g
oracle9i database name "Prod" windows server 2003 ( 172.x.x.x)
oracle10g database name "TEST" sun solaris 9 (165.x.x.x.x)
Please help me on this

For connections between 10.2 and 9.2 the 9.2 end MUST be at 9.2.0.4 or higher. Connections between 10.2 and 9.2.0.1, 9.2.0.2 or 9.2.0.3 are not supported.
Connections between 10.2 and 9.0.1 was never been supported.
Cheers !!!!
Bhupinder

How to improve database link performance?

Hello all,
We use db links to do DML operations on remote databases. For OLTP applications we are facing performance problems for transactions dependent on data on remote database.
For legal and business reasons we cannot state all the data locally.
Could anybody suggest how to improve database links performance or suggest methods/procedures/techniques to enhance speed of OLTP applications going against remote databases ?
Thanks
Sky

AQ is as reliable as Oracle-- the guarantees about delivery of queued messages are the same as the guarantees about committed transactions (i.e. ACID). AQ is designed for asynchronous operation, though. If you are batching transactions, it sounds like you are already doing some sort of asynchronous operations-- I've generally found AQ a lot easier to administer & maintain than rolling your own batching system.
If you want to tune the Oracle side of things, you'll need to explain more about the system(s) involved here. Architecture, data flow, operations that involve the dblink, etc. If you're not comfortable posting that sort of information to a public forum, feel free to send me mail directly [email protected]
As an aside, I'm interested in how you can legally pull data from the remote system to display to your users but that you can't legally cache that data in your system via replication. Sounds like an odd constraint.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Database link in forms 6i stopped working in database 10g release 2.

Hi,
We have Forms 6i with all patches added.
We were able to recompile the form that contains database link in database 10g release 1 environment. Recently we migrated to database 10g release 2.
We still can run the form (previously compiled in database 10g release 1), but when we tried to modify the form and recompile it in databbase 10g release 2,
the forms developer closed down without giving any error message.
When we removed any reference to the database link from the form, we were able to recompile the form with no problem. Database Linkd in SQL works.
The question: what do we need to do in the database 10g release 2 to make the link in forms 6i work?
Thank you. Lev.

I recently upgraded my development environment from Forms 10.1.2.0.2 to Forms 10.1.2.3 and am experiencing the same problem -- not able to COMPILE a form that references a database link. The error is: "Error 352 at line 99, column 3 Unable to access another database 'LINKNAME'". This occurs on an UPDATE statement within PL/SQL code in a form trigger that used to compile and work fine.
I tried the database link in SQL Plus and the link is working fine.
Database environment is 10g 10.2.0.3 on Windows Server 2003.
Is anyone able to do this?

Database link in forms is different that actual database name

I am using a database link in Oracle Forms 6i, however, the database link name for the referenced database is not the same as the actual databse service/instance name.
It does not work, and I suppose its something to do with the global names feature which is true in the source database it is in a replication group.
I would like to know whether the dblink name which I am using in oracle forms, does it have to have the same name as an entry in the tnsnames.ora file, or can be substituted thgrough any so-calld alias from within oracle forms?
Windows 2k Ad svr, Oracle Forms 6i, DB 9.2.0.1

I recently upgraded my development environment from Forms 10.1.2.0.2 to Forms 10.1.2.3 and am experiencing the same problem -- not able to COMPILE a form that references a database link. The error is: "Error 352 at line 99, column 3 Unable to access another database 'LINKNAME'". This occurs on an UPDATE statement within PL/SQL code in a form trigger that used to compile and work fine.
I tried the database link in SQL Plus and the link is working fine.
Database environment is 10g 10.2.0.3 on Windows Server 2003.
Is anyone able to do this?

Question about using database links in Forms 10g

I have a form that uses a database link for the "Query Data Source Name," i.e. it is set to some_view@some_db_link
For some reason when I run a query using the DB link the query takes approximately 30 seconds. When I remove the link and go local the query takes about one second. Has anybody observed and addressed this issue before (without going local of course)?
Thanks,
Thomas

Let me first say that it is never a good idea to use a db link in the data source. It is better to create a synonym in the database and use this as the data source. If the db link changes, you only have to do this in the database, without recompiling forms.
create synonym some_view for some_view@some_db_link
This may already solve your problem. If not, than see if the query is also slow in sqlplus. You may have a problem in your connection between the two databases.

How to create Database link

Hi all,
While trying to create a database link i am getting the following error:
Create Database Link Failed.
ORA-01031: insufficient privileges
Could you please tell me how to create a database link.
Thanks
Grishma

Hi Grishma,
Login as DBA (SYSTEM or SYS for ex.) in SQL*Plus and run this command:
SELECT *
FROM dba_sys_privs
WHERE grantee = 'USERNAME'
AND PRIVILEGE = 'CREATE DATABASE LINK'
Change the USERNAME by the USER you're trying to create the database link from. (CAPITALS!)
Dimitri

How to create database link between oracle and SQL Server

Hello Everyone,
Here i have Oracle Database 9i and SQL Server 2005 databases.
I have some tables in sql server db and i want to access from Oracle.
How to create a database link between these two servers
Thanks,

Thanks for Everyone,
I was struggle with this almost 10 days....
I created Database link from Oracle to SQL Server
Now it is fine.........
Here i am giving my servers configuration and proceedure how i created the db link...@
Using Generic Connectivity (HSODBC) we can create db link between Oracle and SQL server.
Machine (1)
DB Version : Oracle 9.2.0.7.0
Operating System : HP-UX Itanuim 64 11.23
IP : 192.168.0.31
Host : abcdbt
Machine (2)
Version : SQL Server 2005
Operating System : Windows server 2003 x86
IP : 192.168.0.175
Host : SQLDEV1
User/PW : sa/abc@123! (Connect to database)
Database : SQLTEST (exsisting)
Table : T (“ T “ is the table existing in SQLTEST database with 10 rows)
Prerequisites in Machine (2):
a)     Oracle 10g software
b)     User account to access SQL Server database (sa/abc@123!)
c)     Existing SQL Server Database (SQLTEST)
d) Tables (testing purpose) (T)
Steps:
1)     Install Oracle 10.2.0.1 (Only SW,No need of database) *(Machine 2)*
2)     Create a DSN where your windows Oracle 10g SW resides *(Machine 2)*
Control panel >> Administrative Tools >> Data Source (ODBC) >> System DSN ADD
You can follow this link also.....
http://www.databasejournal.com/features/oracle/article.php/3442661/Making-a-Connection-from-Oracle-to-SQL-Server.htm
I created DSN as
DSN name : SQLTEST
User : SA/abc@123! (Existing user account)
Host : 192.168.0.175 (machine 2)
Already I have 1 database in SQL Server with the name SQLTEST
You can create DSN with different name also (not same as db name also)
3)     Create a hsodbc init file in $ORACLE_HOME\hs\admin *(Machine 2)*
Create init<DSN NAME> file
Ex: initSQLTEST
Copy inithsodbc to initSQLTEST
And edit
initSQLTEST file
HS_FDS_CONNECT_INFO = SQLTEST    <DSN NAME>*
HS_FDS_TRACE_LEVEL = OFF*
save the file....@
4)     Configure Listener.ora *(Machine 2)*
LISTENER_NEW =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
SID_LIST_LISTENER_NEW =
(SID_LIST =
(SID_DESC =
(SID_NAME = SQLTEST) *+< Here SQLTEST is DSN NAME >+*
(ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
(PROGRAM = hsodbc))
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
(PROGRAM = extproc) )
:> lsnrctl start LISTENER_NEW
5)     Configure tnsname.ora *(Machine 2)*
SQLTEST11 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = SQLTEST))
(HS=OK)
:> tnsping SQLTEST11
If No errors then conti….
6)     Configure a file *(Machine 1)*
Cd $TNS_ADMIN ($ORACLE_HOME/network/admin)
Create a file
$ vi TEST_abcdbt_ifile.ora
something=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST =192.168.0.175) (PORT=1525))
(CONNECT_DATA=
(SID=SQLTEST))
(HS=OK)
$ tnsping something
$ sqlplus system/manager
Your connected to Oracle database *(machine 1)*
create database link xyz connect to “sa” identified by “abc@123!” using ‘SOMETHING’;
select * from t@xyz;10 rows selected.
Thanks,
Edited by: ram5424 on Feb 10, 2010 7:24 PM

How to create database links

Hi,
We have two databases on two differenet servers and we want both of the databases to be synched and application is running only on one server.
Is it possible through DB links if yes then how.
If any better solution than DB links is there then pl tell.

850520 wrote:
I think DATA GUARD is good from recovery point of view..but i want that my application will update one database & same data will be updated on 2nd DB automatically means application need not to update second database by querying it..
Is there anything like this.And what is the second database going to be USED for? Until we know that, we can only guess at the best solution, which in any event is probably NOT database links.

How to create database link between 2 servers to exports schemas

Could any one please give Steps to create database link between 2 servers (linux) to exports schemas like AR, INV, GL.......etc

Hi Mouni,
As i suggest above, please use the REMAP_SCHEMA parameter, so that you can create those objects which are getting created in the Apps Schema in the XBSI schema, I have already provided the syntax above.
ORA-31684: Object type VIEW:"XBSI"."XBSI_ORDER_LINE_INFO_V" already exists
ORA-31684: Object type VIEW:"XBSI"."XBSI_SERIAL_NO_V" already exists
ORA-31684: Object type VIEW:"XBSI"."XBSI_ONHAND_BALANCES" already exists
ORA-31684: Object type VIEW:"XBSI"."XBSI_PURCHASE_ORDERS" already exists
ORA-31684: Object type VIEW:"XBSI"."XBSI_ORDER_HEADER_INFO_V" already exists
ORA-31684: Object type VIEW:"XBSI"."XBSI_ORGANIZATION_ITEMS" already exists
ORA-31684: Object type VIEW:"XBSI"."XBSI_PE_FIND_RESULT" already exists
You are facing these errors as you have already done the import, and when you try to re-import it says those objects are already available. If this fresh import, Please drop the the new user you have already created in the Datawarehouse instance, and recreate the User and start a fresh import.
Hope this help!
Thanks &
Best Regards,

How to use database link to create table in other database?

e.g., java jdbc is connected to the database A.
i want to create one table (Table1)in database B, and then insert data into Table1 select ....from Table2 which is in database A.
i used the create database link (database name) connect to (database) indentified by .....
but ...i got the sqlException as i wrote before.
Thanks again.

http://forum.java.sun.com/thread.jspa?threadID=656868&messageID=3860293#3860293

How to resolve database link issue???

Hello all,
actuall i want to access a remote database server which is basically an Oracle8 server and i want to access that server while sitting in Oracle8i server....
I have tried create database link but it's not functioning properly ..........
it's giving an error some think like "Can not resole TSN Service name....."
Now plz help me to resolve that issue and kindly tell me all the pre-requsits and plz send me a piece of code as well..................
Thanks In Advance,
Omer Saeed Khan.

it's giving an error some think like "Can not resole TSN Service name....." Honestly. Give us a proper error message with a number. "something like" is not good enough.
Have you read the documentation?
http://download-west.oracle.com/docs/cd/A87860_01/doc/server.817/a76960/toc.htm
If I have to guess I'd guess that you haven't included the remote database in the server-side TNSNAMES.ORA file.
Regards, APC

How to use database link in from6i?

I can use database link in sql plus,but i can't use it in forms6i,why? thanks

Don't know why.
What I always do is create a synonym on the local database which points (through the db link) to the object on the other database.
Regards,
Meine

How to complie database link in forms 6i

Similar Messages

Maybe you are looking for