How to configure adapter monitoring in XI?

Please help. Points guaranteed.Thanks!

Hi Jennifer,
Please have a look upon these links :
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0b4580be-0601-0010-d3ad-bd6ce51ae916
http://help.sap.com/saphelp_nw04/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/content.htm
I hope it will help you.
Regards,
Jyoti

Similar Messages

How to Configure Adapter for different environments?

Hi
I wanted to know solution to a pratical problem. If a communication channel is created by configuring a adapter, how is the configuration managed for different phases of the life cycle i,e when it goes from development to QA to Production. A adapter may need to be configured differently depending upon the environment it is in. I hope one doesn't have to change it every time it is taken from one environment to another. Is there any concept like properties file in XI?
Vijay

HI,
In general the Same evironment should be in both Dev and QA and also in Prod .
Whatever we developed in Dev environment , if you transport it to QA , the same should work, similarly in Prod also.
We have certain fecilities like cutomising the Communication channel with the Communication Channel Template.With this we can configure as per our needs.
Eventhough it is not sufficient to meet your BS requirement , then we need to have
Dynamic configuration see the below link for more details
Dynamic configuration in adapter modules - /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules
Dynamic Configuration of Some Communication Channel Parameters using Message Mapping -
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
Regards
Chilla

How to configure Request Monitoring in OEM 12.1.0.1.0

Hi All,
I have deployed ADP manager and ADp agent in OEM 12c Cloud Control. There is a Middleware feature in OEM 12.1.0.1.0 named "Request Monitorung" for which there is pre-requisite of deploying ADP manager and ADP agent. I read an oracle document for Request Monitoring but fail to understand its capability and significance also I am not able to configure it. Can anyone provide me with some good links explaining this particular feature in OEM. In the document which I read it is mentioned that
"To view and configure requests, grant the Request Monitoring Administrator privilege which provides full access to the Request Monitoring pages and allows the user to modify the request configuration settings. For richer Request Monitoring functionality, we recommend that you grant the following privileges:
◦View any Target privilege which allows user to drill down to the Target Home page and to view the target metrics in the Topology view.
◦JVM Diagnostics privilege which allows user to drill down to the JVM Diagnostics pages from the Topology page. "
How can I grant these priviledge is not mentioned here. Also the document which I am referring if for OEM 11.1.0.1. I didn't find any document for OEM 12.1.0.1.0
Please help!!
Thanks in Advance!!

Hi Roshni,
BTM supersedes Request Monitoring in functionality as it is payload aware and much more granular as a whole in regards to its requestion transaction monitoring capabilities. This is particularly true as we just released the Business Application dashboard as mentioned in the previous thread. It is highly recommended that BTM be used in 12c as opposed to the older Request Monitoring functionality.
Cheers,
Glen

How to configure the monitoring computer to see the Xserve Raid

Finally I got My Xserve RAID.
I mounted It using disk utility as a single big disk.
But i don't know how to use RAID Admin since no List of System on subnet is present.
How do i change these setting on the monitoring computer?
I can write to the Xserve and i can read from it but I cannot use RAID Admin.
The fibre Channel utility is working well, do I have to change the setting of the PCI card?
I'd like to leave It as a single 2.7 Tb disk RAID 5, but sliced in smaller disk (Lun ?)
Please Help.
Thank you in advance
umberto

Now IT is Buidilng the Raid 5 across all the 7 disk. I unmount it from the desktop and shut It down via Raid Admin
Building a RAID 5 array takes hours. You can't shut the RAID down while it's doing this, otherwise you will lose the array settings.
I removed the older system and I added a new one that It has a different IP.
Once you connect with RAID Admin you should change the XServe RAID's configuration so that it has an IP address you can remember. If you leave it set to DHCP then it will probably change addresses every time you start it up.

SOA Composites in Parallel - How to Configure and Monitor

We have couple of SOA Composites that customers are making calls to. How can I configure these composites / Web Service that can be handled parallely.
Customer is calling each composite 10/20 times (because of the load) in every 10 seconds and based on their testing it is queuing up and performance is slow. But when I look at CUBE_INSTANCE table for start and end of composite instances, it is doing good.. with in 1 second.
I am guessing I need to configure to handle parallel calls to these SOA Composites.
Any clue or help

Hi,
It depends on what you have in that composite? For BPEL you should go through this...
http://docs.oracle.com/cd/E23943_01/core.1111/e10108/bpel.htm#BABGBFII
The master document is this...
http://docs.oracle.com/cd/E23943_01/core.1111/e10108/part_soa.htm#ASPER99595
Cheers,
Vlad

How to configure Seeburger adapter

Hi All,
Can you pls guide me on how to configure adapter? and also why do we need mercerator and converstion agent tools along with see burger adapter?
Can't find any doc on how to configure seeburger adapter!!!
Can someone pls put light on the messageflow when seeburger and these converstion agents are used?
Regards,
Ashish

Hi Ashish,
It is similar like other adapters once it is supplied. But take care about security/firewalls settings.
and also why do we need mercerator and converstion agent tools along with see burger adapter?
>>>Not a mandatory to use along with seeburger.
Can someone pls put light on the messageflow when seeburger and these converstion agents are used?Can't find any doc on how to configure seeburger adapter!!!
>>>Seeburger EDI Adapter provides an EDI solution on internet via HTTP or AS2 to replace the expensive VAN. It provides some pre-built mappings for IDOC to ANSI X12(810,850,855,856 etc.,) and Idoc to EDIFACT(ORDERS,DESADV,INVOIC etc.,) and has the ability to build your own. These pre-defined mappings transform the IDOC-XML to EDI-XML format.
These transformed EDI-XML messages are then converted to EDI specific format using the Seeburger's BIC(Business Integration Converter)adapter. In addition, Seeburger provides adapters like AS2,FTP(EDI specific) and so on to route these EDI messages to external EDI Partners.
Seeburger EDI Adapter leverages SAP XI's Adapter Framework. This Adapter is used to perform conversion between EDI and XML format. It also provides some canned EDI layouts and the ability to build your own. It is used to transfer the EDI message via HTTP or AS2 protocols.
The most direct way of using the Seeburger adapters is to configure the BIC as a module. There is a software component from seeburger called bicmapper which will allow you to do the following:
1. define or import the inbound message metadefinition in various formats ( edifact, xml,...)
2. using a mapping create an xml variant as the output metadefinition or edifact in the other direction.
3. create a one to one mapping between input en output.
4. export the metadata in xsd or sda format for import in XI
5. generate an SDA which can be deployed in XI and used as a module.
Please go through the following links which clearly explains what you want and it also helps you in understanding the same in depth:
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Thanks
Sreeram

Configure external monitor to be --left-of laptop screen (nouveau)

Hi,
I have problem configuring external monitor to work like nvidia's 'twinView'.
Having no xorg.conf my external monitor is configured just to clone image displayed on latop screen. I can setup correct resolution in my DE (I'm using XFCE), but what confuses me is how to configure external monitor to work as separate screen (not to present cloned image).
This my my output from xrandr:
[kuba@t61:~]$ xrandr
Screen 0: minimum 320 x 200, current 3120 x 1050, maximum 8192 x 8192
LVDS-1 connected 1440x900+1680+0 (normal left inverted right x axis y axis) 304mm x 190mm
1440x900 60.13*+ 50.00
1152x864 59.96
1024x768 59.92
800x600 59.86
640x480 59.38
720x400 59.55
640x400 59.95
640x350 59.77
VGA-1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm
1680x1050 59.95*+
1280x1024 75.02 60.02
1152x864 75.00
1024x768 75.08 60.00
800x600 75.00 60.32
640x480 75.00 60.00
720x400 70.08
DVI-D-1 disconnected (normal left inverted right x axis y axis)
Following wiki instructions (http://nouveau.freedesktop.org/wiki/Randr12/) this commad helps me to setup what I want:
xrandr --output VGA-1 --left-of LVDS-1
and I want to persist such configuration.
I tried to configure it in /etc/X11/xorg.conf (there was no such file)
[kuba@t61:~]$ cat /etc/X11/xorg.conf.bak
# the right one
Section "Monitor"
Identifier "LVDS-1"
Option "PreferredMode" "1440x900_60.13"
EndSection
# the left one
Section "Monitor"
Identifier "VGA-1"
Option "PreferredMode" "1680x1050_59.95"
Option "LeftOf" "LVDS-1"
EndSection
Section "Device"
Identifier "nvidia card"
Driver "nouveau"
#Option "Monitor-DVI-I-1" "NEC"
#Option "Monitor-DVI-I-2" "FUS"
EndSection
Section "Screen"
Identifier "screen0"
Monitor "VGA-1"
DefaultDepth 24
SubSection "Display"
Depth 24
#Virtual 2560 2048
EndSubSection
Device "nvidia card"
EndSection
Section "ServerLayout"
Identifier "layout0"
Screen "screen0"
But it seems like still there is something wrong as every time I run X I have cloned output on both screens.
Any ideas?
Last edited by jakub (2014-11-16 12:05:19)

jakub wrote: Option "LeftOf" "LVDS-1"
Should that not be "left-of"?

How to configure sender mail adapter

Hi,
My scenario Mail-XI-file. In adapter monitoring it is giving me error "not initialized: mail agent null". What do we exactly mean by this??
and can anyone suggest any blog as how to configure sender mail adapter.
Kindly help
Anu Singhal

Hi Anu,
Just check this link
http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/frameset.htm
and this 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
Rewardif helpful
Reagards
Sachin

How to configure SFTP Adapter in XI?

Hi All,
How to configure SFTP adapter in XI?, It would be great if anyone sends a step-by-step documentation on the same.
Thanks in advance

Hi,
About SFTP .
1) SFTP (Secure File Transfer Protocol)
"SSH File Transfer Protocol" or SFTP is a network protocol that provides file transfer and manipulation functionality over any reliable data stream. It is typically used with the SSH-2 protocol to provide secure file transfer. SFTP encrypts the session, preventing the casual detection of username, password or anything that is being transmitted. One key benefit to SFTP is its ability to handle multiple secure file transfers over a single encrypted pipe. By using a single encrypted pipe, there are fewer holes in the corporate firewall.
SFTP:
As per the latest SAP PI/XI support pack, it does not support SFTP via File Adapter.
So alternative approach to cater this requirement from XI is to make use of Unix Script at OS level to transfer the files from/to third-party systems.
Inbound Interface - i.e. third-party system ->XI->SAP:
File is transferred to a folder in SAP XI landscape from the third-party legacy system using UNIX Script with secured protocol. Once the file is ready in the XI landscape, File Adapter will poll this directory and file is picked up by NFS protocol.
Outbound Interface i.e. SAP->XI->third-party system:
XI is responsible for writing a file into a folder in the XI landscape. These files are transferred to the third-party system by executing UNIX scripts with secured protocol i.e. via sFTP.
Pre-Requisites:
Public key should be exchanged between external systems and the PI system.
UNIX shell script has to be developed and scheduled.
Advantages:
Highly Secured.
Ability to handle multiple secure file transfers over a single encrypted pipe .By using a single encrypted pipe, there are fewer holes in the corporate firewall.
Disadvantages:
Two-Step process i.e. XI>Temporary folder>External System and vice-versa
Files have to be temporarily stored in XI server.
Multiple failure points i.e. XI and Unix script execution
Maintenance of an external UNIX script.
Difficulty in monitoring the execution of the shell script as it cannot be monitored thru XI.
Need to generate keys and install it in the SFTP site as a pre-requisite i.e. SFTP clients must install keys on the server.
SFTP uses keys rather than certificates. This means that it can't take advantage of the "chains of trust" paradigm facilitated through Certificate Authorities.
Files from the XI server should be deleted/archived in a periodic manner to increase the disc space so that it will increase the performance.
Note: UNIX shell Script can be executed as a background job or' can be triggered from SAP XI through OS command at File adapter level.
Check the links.
Secure FTP (SSH) with the FTP Adapter
Secured File Transfer using SAP XI
Secure FTP in SAP XI
Regards,
Phani
Reward points if Helpful

How to configure network with just 1 ethernet adapter?

I was looking for a guide which would talk about how to configure your network in case if you have only 1 Ethernet adapter. Is it mandatory to have more than 1 network card to configure multiple ports? If not, what are the options available to deploy a Virtual Machine that can have applications which are available over the network. I don't have a separate network i.e. public network as well as management network is of same IP range.
I am having 2 node cluster using NFS for pools as well as repository.
~Yagnesh

yagneshg wrote:
I was looking for a guide which would talk about how to configure your network in case if you have only 1 Ethernet adapter. Just enable the "Virtual Machine" role on the Management network that is automatically connected. You will then be able to add guest vNICs to the same network.
I am having 2 node cluster using NFS for pools as well as repository. I strongly recommend you get at least one more physical NIC for your server, if not two: running NFS and the cluster heartbeat and the guest traffic all over the same network is going to put a lot of data down the wire and you may land up in a situation where the cluster traffic is overwhelmed and a node reboots. You need to be very careful in this situation. Network cards are cheap and you should have at least two or three, I reckon.

How to configure a full JMS Sender Adapter Scenario

Hi guys,
I have to do a JMS -> PI (7.1) -> File scenario, I never used JMS Adapter, and I'd like to tell you what I have done, and what I think is missing.
First I went to the NetWeaver Administrator ->Configuration Management ->Infrastructure ->JMS Server Configuration-> Create ->JMS Queue.. and I created a new Queue from a Virtual Provider (SAP JMS Provider).
The first thing I didn't know how to configure it is which transport protocol I have to choose in the CC adapter (SonicMQ JMS Provider, WebSphere MQ, etc..)
But I also don't know is if there's something missing on the NWA, to create, modify, etc. I read this slide: (https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a05b2347-01e7-2910-ceac-c45577e574e0) where was shown how to create a SAP standard queue, and I also read all the documentation from help.sap.com (all the JMS basics and explanation) but I still don't know how to fully configure the CC and how to trigger the messages.
Please, if you need further information I can give it.
Thanks in advance.
Juan

Hi,
did you try this blog from William?
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
Regards,
Michal Krawczyk

How to Configure Microsoft loopback adapter in windows 2008

Hi all,
I am trying to install SAP IDES 6.0..... while i m trying to install it , it is asking forUnlimited Strength Jurisdiction Policy Files at runtime.
I do have local and US policy jar file, but i guess its asking for JCE extension file, i dont know about it. so i m not able to proceed
further. it gives osme error about local host. i think its about Microsoft loopback adapter. can anyone have idea abt it.How to
Configure Microsoft loopback adapter in windows 2008?
Can anyone help me ASAP coz i m stucked like anythng.
thanks
Cheers

Hi vinay
Thanks for reply...I m Installing SAP IDES...with DB2
I have upload JCE zip file...after clicking next button i m getting following Errors,
ERROR 2014-10-02 09:52:29
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS' does not exist on the 'localhost' host.
ERROR 2014-10-02 09:52:29
FCO-00011 The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect was executed with status ERROR .
i guess its about Loopback adapter configuration. Still i m not sure... DO u have any idea about it.
How i can get rid of it.
Thanks

How to configure File Adapter (Read)..?

Hi all,
While configuring the Read Adapter in BPEL 11g i am getting not reading any data from given location. But my location are correct.. So please how to configure File Read adapter and give any URL for this ... Thank you

Hi all,
The file adapter it consists many operations like
1: Read
2:Write
3:Synchronous Read
4:ListFiles
So you are asking about Read operation
First you take one File Adapter-->Select Read Operation--->Give Incomming file Location ( In local system you can give like C:/temp/NewDir Or Unix Envornment like you can give /temp/NewDir)
After that you can give file Name like wich format it's incomming file name like CSV.txt or CSV.xml after you give Polling Intervels second or Mintued or Hour.You can select Native format or Define service Later once configure all those things the file adapter configration is done . If you have any doubts in file configrigation please go for the below link...........
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10231/adptr_file.htm#TKADP322

How to Configure Reciver HTTP Adapter

Hi,
i am doing Proxy-HTTP syncronous scenario.
Proxy will fetch XML file located in one server.
(example: www.yahoo.com/exchange_rate.xml)
i have following problems.
1. How to configure the Reciver HTTP Adapter.
2. What should I use in Address Type.
HTTP Destination or URL Address.
3. If I use HTTP Destination , The length of the field is very short to accomodate complete address.
4. If I use URL address, what should I put in all the fields , like Target host, Service Number, path.
I have URL , something like this, www.yahoo.com/exchangerates.xml
I dont know what to put in Target Host, service name and path.
Please help. thx. BD.

Hello,
if you use a HTTP-Destination it uses a rfc-destination.
So you configure first a rfc-destination (in sm59 of type G)
and name it for example RFC_EXAMPLE and then you
use this name for the HTTP-Destination in your adapter.
if you use the url
Target host:
- you can use the ip
Service Number:
- that means the port you want/must use
path:
- in your case: /exchangerates.xml
Regards
Patrick

How to configure Sender IDOC adapter

Hi could someone pls guide me on the steps that i need to take to configure IDOC sender adapter..
Are the steps for Sender and Receiver IDOC adapter same other than the fact that sender idoc adapter doesn't need a sender communication channel.
Regards,
Ashish

hi Goyal,
Just check out this link.
How to Configure IDOC
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
Regards
Sachin

How to configure adapter monitoring in XI?

Similar Messages

Maybe you are looking for