How to Configure an Cisco 5505 for PPTP VPN connectivity

I currently have a Cisco ASA 5505(ASA Version 8.2(1), and ASDM gui version 6.2) and a Windows 2008 R2 server with one NIC card. Currently the router is connected to the interent sucessfully using the 'outside' interface(devices connected to the 'inside' interface have access to the internet and are assigned IP addresses via DHCP on the Windows 2008 Server which is also connected to the 'inside' interface) When connected with a client on the inside interface I can establish a VPN connection with the W2008 server, however when I try to connect through the internet I cannot. I have tried researching this on the internet, but have not had much luck. I know it has something to do with pptp port and allowing gre, but I am not familiar enough with configuring Cisco devices or the language they use, to configure this router. I feel as though I am missing something small but very critical. Any help or feedback you can provide regarding this issue is most appreicated, thank you.
*Edit: I have attached a network diagram of what I am trying to accomplish, and I have also attached a dump of the current running-config.

Hi,
Below is the link to the admin guide for the RV042. Chapter 9 covers the configuration of site to site VPN’s and begins on page 123.
http://www.cisco.com/en/US/docs/routers/csbr/rv0xx/administration/guide/rv0xx_AG_78-19576.pdf
If you need further assistance please feel free to contact Cisco Small Business for help in configuring and troubleshooting your VPN.
Thank you,
Jason Nickle

Similar Messages

Create PPTP VPN Connection

Hello, how could I setup or deploy several PPTP-VPN connections via AppleScript? (System Preferences-Network-Add Interface-VPN-PPTP)
Thanks in advance!

I must confess that I don't know much about network connections. However, using [GUI Scripting|http://www.macosxautomation.com/applescript/uiscripting/index.html], the following script (tested on my MacBook Pro) should add one "VPN (PPTP)" connection to the Network pane of you System Preferences:
tell application "System Preferences"
reveal pane "Network"
activate
tell application "System Events"
tell process "System Preferences"
tell window 1
click button "Add Service"
tell sheet 1
click pop up button 1
click menu item "VPN" of menu 1 of pop up button 1
delay 1
click pop up button 2
click menu item "PPTP" of menu 1 of pop up button 2
click button "Create"
end tell
click button "Apply"
end tell
end tell
delay 1 -- optional (just for visual feedback)
keystroke "w" using {command down}
end tell
end tell
Before using this script, the Accessibility Frameworks must have been enabled by clicking the checkbox labeled "Enable access for assistive devices" in the Universal Access System Preference pane.
Message was edited by: Pierre L.

How to configure Automatic Account Clearing for A/R

Hi,
Kindly advice me how to configure Automatic Account Clearing for A/R
The client requirement is
In A/R the customer accounts are not automatically clearing when a payment is posted for that account. We are still seeing all open items and all paid or cleared items when we go to FBL5N and select open items for viewing. Please make account clearing automatic for customer payments.
Thanks in advance
Sunitha

Hi,
Use T code OB74.
Maintain for your Chart Of Account, acct type "D", From and to customer accounts and then add the critera you want. Pls note you cannot define more than 5 criteria.
Then schedule the clearing program job F.13 in the background.
Cheers.

How to configure oracle thin drivers for SUN APPLICATION SERVER

hi all,
I am working with EJB with oracle as back-end. I wants to know how to configure oracle thin drivers for the SUN APPLICATION SERVER. Please explain me breifly.
Advanced thanks to all the replies.
with regards,
/kumaraswamy.n

Kumaraswamy,
Did you try searching the Internet? Here are the results of my Internet search:
http://tinyurl.com/zo4gk
And one of the first hits in the list was this:
Deploying to a Sun Java System Application Server
Good Luck,
Avi.

How to configure Oracle Enterprise Manager for ASM RAC Database ?

Dears,,
We have two databases (Primary & Standby), each database has two instances
Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
How to configure Oracle Enterprise Manager for this environment ?
I need documentation for this please.
Many thanks & Regards,,

Assuming an agent is running on the servers you want to monitor,
navigate to the Agent home page (Via setup --> Agent)
When in the agent home page select 'Add Database'and press [Go]
Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
When done, press [Ok] to return to the agent home page.
Regards
Rob
http://oemgc.wordpress.com

How to configure Workflow Notification Mailer for oracle alert in R12

Hi all....,
How to configure Workflow Notfication mailer for oracle Alert in R12. Please provide the complete steps.. Its urgent.. Plz help me..
Regards ,
Madhan

Duplicate thread (please post only once)
plz help me...!!!! Workflow Notification Mailer
plz help me...!!!! Workflow Notification Mailer

How do I enable the security for my wireless connection?

How do I enable the security for my wireless connection?

Enter the setup page (192.168.1.1), hit the Wireless Tab, then the Security tab.

How to configure ACS 5.2 for policy condition on TACACS+ Service

In https://supportforums.cisco.com/message/3953175#3953175 thread, I was able to get the ACS 5.2 work with SRX for both SSH CLI and J-Web TACACS+ accounts. However, I found the behavior is different on our production environment. I found our ACS 5.2 was configured authorization rule with condition "TACACS+ Service" = "junos-exec". I don't know how to configure this on my ACS 5.2 Please guide me how to configure this.
I found there was NO TACACS+ "Authorization Request" when access via J-Web in our production SRX and ACS. However, there were TACACS+ "Authorzation Request" when access via J-Web in our production SRX and ACS. The difference between my lab ACS and production ACS is the authorization rule condition. In my condition, I configure with all "SRX" Device Type. but in our production ACS 5.2, it was configure to TACACS+ Service=junos-exec. so I like to test it in our lab to find out the difference. Thanks.

I would suggest you to go through the below two link.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/migration/guide/Migration_Configure.html
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/common_scenarios.html

How to configure a Cisco 3560 with MAC-based 802.1x authentication by radius server

Hi dearI
How can I configure a Cisco 3560 to authenticate a client based on its mac address with 802.1x and radius server. Many tanks in advance!

Olivier,
You can't reference WLP visitor roles in weblogic.xml, but you can
reference global roles (created using the WLS console):
- <security-role-assignment>
<role-name>PortalSystemAdministrator</role-name>
<externally-defined />
</security-role-assignment>
-Phil
"Olivier" <[email protected]> wrote in message
news:[email protected]..
>
We need to have login page to our portal app.
When using "form based" authentication is it possible to map the securityon a
"entitlement role" ?
Our need is to be abled to give direct url acces to some pages of theportal (for
exemple by sending urls like"http://server/appcontextpath/appmanager/myportal/mydesktop?_nfpb=true&_page
Label=mypage")"
by email to portal users) and need a simple mecanism of authenticationbefore
redirecting to the portal page.
Inste

How to configure oracle listener profile for multiple oracle database

Hi,
I am going to install solution manager system in the same server of ERP EHP4 on Windows. Both DB are oracle.
I'd like to know how to configure listener in this kind of envirnmonent.
a. use two listener and different ports
b. use same listener but different ports
c. use same listener and same port
Which is the correct mothed?
And, after installation, there seem three set of profiles of listten, one for ERP, one for SLM, and the other for OS?(%windir%system32), which one is functional?
Please advise.
Thanks a lot.
Regards,
Alex

Hi,
standard installation is creating new configs for listener for each instance.
I would recommend to use one listener per each instance.
YOU CAN NOT HAVE one port number for two differnet systems!
If you want to use one listener than you must adapt tnsnames.ora, listener.ora and ensure that both systems will use different port numbers.
For example PORT= 15<system number>
Peter

How to configure request manager service for multiple website in one web application

I have set up sp 2013 as below:
web application : wa1
site collection : sc1
sp site: site1, site2
I used 2 WFE, 1 APP, how can I use request manager service to control site1 to wfe1, site2 to wfe2?
Awen

That's not what i'd describe as load balancing.
A better description would be load-isolation. In your description then if the load on site1 was large (and growing) but site2 was quiet then site1 would struggle and eventually become unable to handle the number of users but site2 would still be ok. That's
fine from a QOS point of view but it's not the norm for load balancing. It would work in simple scenarios but the out of the box load balancing tools are much better suited than that sort of approach.
This article shows how to configure the RMS and may help show how your request is difficult to configure:
http://www.harbar.net/articles/sp2013rm2.aspx

How to configure Solaris 10 IPMP for Oracle VDI 3.3.2

Hi,
Does anyone have an indication on how to configure Solaris 10 IPMP in a manner that supports Oracle VDI?
We have setup two servers with 2 test addresses on physical and 1 logical for the hostname of the box, but when we configure VDI the VDI database does not come up on the 2nd box. We have also tried configuring IPMP without test addresses, but it doesn't make any difference - the DB still doesn't go into the up state after configuration on the 2nd server.
Solaris 10 u9 with patches
Two physical NICs on management VLAN via 2 switches
Two physical NIcs on VDI VLAN via 2 switches
VDI 3.3.2
All hostnames are in DNS and resolve for short name, FQDN and also reverse IP lookup
The is a proposal pdf on Oracle website that mentions IPMP, so someone has done it. Just could do with a hint on how it was done so that it works.
( http://www.oracle.com/us/technologies/virtualization/vdi-design-proposal-1401195.pdf )
Thanks
Paul

OK, updating this with what was causing the issue.
Not an IPMP problem this was a DNS problem. The VDI servers have access to two DNS environments, so had a DNS search path that had the domain where the VMs where going to go and another for management of the box with two DNS servers listed in /etc/resolv.conf.
We configured VDI using the FQDN for the management DNS, however the vda-config script takes the hostname of the box adds the first DNS domain from /etc/resolv.conf search entry and configures using (it seams to ignore what you put into the vda-config). When the config script comes to configuring MySQL because the names didn't match (FQDN it created by adding hostname to the 1st entry in DNS search path & FQDN that you put into vda-config command), it decides that it is configuring a "Client MySQL" instance rather than a "Slave MySQL" instance, which means the VDA DB never comes up in the out of vda-center status.
So the fix is to:
1) configure IPMP without test addresses (so traffic comes out of the correct IP and can be reverse looked up in DNS by the other host)
2) if you have multiple DNS search entries, configure VDI using the first entry in your search path as its FQDN
Paul

How to Configure OIM 9.1 for Request-Based Provisioning

Hi experts,
I am new to OIM and need to know how to configure request based provisioning. Here is the scenario.
My environment has two target systems (Sun LDAP and Novell EDirectory) configured for provisioning to OIM 9.1
A user should be able to login, request either or both (SUN LDAP and EDir) for self or others.
Now the request should go to an admin for approval.
Once approved, the requested accounts should be created on the target systems.
Please guide me on the procedure to be followed.
Many thanks in advance

You will have to download the standard out of box connector for these target systems & will have to import it through the Deployment manager into OIM. Then you will have to create the Process definition of approval type & attach it to the same resource object. Please read the belo link before implementing any thing. This will provide you a better idea.
http://download.oracle.com/docs/cd/E10391_01/doc.910/e10363.pdf

JMS - How to configure incremental redelivery intervals for an MDB

Hi all,
I noticed that when message delivery in an MDB fails, the time to the next delivery attempt for the message increases with every failed delivery. The intervals are 5, 10, 20, 40 and 60 seconds. After this the interval stays at 60 seconds.
Now I was trying to find out how to change this behavior, but did not find the appropriate configuration elements in the console or the documentation. What I found are the options to configure "Default Redelivery Delay" in the ConnectionFactory which is set to 0 and in the Queue "Redelivery Delay Override" which is set to -1.
Both of these settings do not explain the incremental delay. Can anyone tell me how to configure this? Is that part of the MDB deployment descriptors?
Thanks,
Chris

Hi Tom,
thanks again for your answer :-) I am sorry, i forgot to mention in my initial post, that i had a look at those parameters. But according to the documentation the default values for both are 60 seconds. In my MDB i did not set any of those, so it should not start at 5 seconds like it does but at 60 seconds. Additionally this suspension, I if understood correctly, should only kick in if the JMS resource (I figure this is the queue in this case) is unavailable, which is not the case in my scenario. And as a third the suspension described there is not growing exponentially as I experienced.
Sorry if I am just thick here, but the documentation just does not look like what I am looking for. Are there any misunderstandings on my side?
Thanks, Chris

How to configure a error queue for weblogic jms topic

Hi guys.
I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
1. using jms transport configure proxy service:
Retry Count :3
Retry Interval:10
Error Destination: ErrorTopic
Expiration Policy: Redirect
I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.
Any suggestions for this topic? Can anyone provide some helps or any useful links.
Thanks in advance.
Mingzhuang

Mingzhuang
I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
1. using jms transport configure proxy service:
Retry Count :3
Retry Interval:10
Error Destination: ErrorTopic
Expiration olicy: RedirectUnlike File/SFTP, JMS proxy service definition does not have the concept of Error Destination. To accomplish similar functionality go to JMSQ on (for which proxy is configured) server console (http://localhost:7001/console) and configure the Error Destination. Following URL will help in how to configure JMS Q.
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueues.html
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueueDeliveryFailure.html
I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.If every thing is configured as per above step, then the after retries, the weblogic server will put the message into JMS topic configured. Your proxy will receive from this topic.
Let me know if we are not on same page.
Cheers
Manoj

How to Configure an Cisco 5505 for PPTP VPN connectivity

Similar Messages

Maybe you are looking for