How to configure and deploy OAM 11g with DB setup using silent mode

Hello all,
I am trying to create automation process to install and configure OAM 11g on WLS. This task involves three stages
1. Install WLS
2. Install OAM 11g
3. Create DB schema using RCU
4. Configure and deploy OAM 11g
I have done first 3 stages in silent mode using scripts and response files. I am stuck at 4th stage. I know how to configure and deploy OAM 11g using config.sh via GUI installer as well as console mode. But I would like to run config.sh in silent mode something like
./config.sh -mode=silent -silent_script=<script_location>
I have searched a lot, but could not find any resource on how to do it? I tried passing the parameters via a text file. But that has not worked. I have also explored WLST, but it also does not work. Given that first 3 things are relatively very simple, the 4th step is becoming complex. I would be very thankful if someone can please point me in the right direction.
Thanks!

Have a look at your software directory : <sofware directory>/Disk1/stage/Response
Here you will find 2 rsp files which you can use to install and then configure it all.
Good luck.
Filip

Similar Messages

How to configure and publish Webservice (WMS Redprairie) to SAP using RFC

Hi XI Techno Savies,
I know how to configure SAP RFC, SAP IDOC adapters for sending and receiving. I want to know the step by step procedure to configure and Publish Webservices for Ware House Management System "REDPRAIRIE" for sending and receiving message to SAP R3/BW. Kindly help me.
Thanks,
Sridhara Addala.

Hi,
This doc may help you-general
http://help.sap.com/saphelp_nw04/helpdata/en/0d/2eac5a56d7e345853fe9c935954ff1/content.htm
/people/durairaj.athavanraja/blog/2004/09/20/consuming-web-service-from-abap
in XI-
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/befdeb90-0201-0010-059b-f222711d10c0
Regards,
Moorthy

How to create and deploy a war file on wls using the console

          my question is how to deploy the simpleSession.jsp example in the weblogic/samples/examples/jsp/
          dir examples as a war file on wls cluster what are the steps to do so.. thanks
          in advance


[att1.html]

How to compile and deploy JAX-WS web service from commandline (!) ?

I have read a couple of tutorials about how to create and deploy web services with
certain IDEs (e.g. Eclipse).
But I found no guide on how to compile a java web service source from command line !!
Lets say I have a java source class with annotations inside (like "@WebMethod").
How do I generate with the built-in j2ee v5 tools from a web service from command line and deploy it e.g. to TomCat or JBoss ?
Is there somewhere such a simple step-by-step intro?
Thx
Peter

You can download JWSDP 2.0 from sun and install it. Under jaxws (the installed directory) you can find sample directory which has build.xml can be run from command prompt using ant. if you want in detail means go through the build.xml and use wsgen.bat or wsimport under the bin directory of jaxws
Edited by: Muyallu_Bala on Apr 14, 2008 5:49 AM

How to Configure and Use Oracle's JMS Connector with Tibco EMS

Jeff,
I am getting the below exception while try to do the deployment of the sample provided on 'How to Configure and Use Oracle's JMS Connector with Tibco Enterprise for JMS'
While deployment not able to get the 'TibcoJMSReference',
As I understand in the 'orion-application.xml for the below, unable to get the instance. Could you adivce how I can enable the trace more?
<resource-provider class="com.evermind.server.deployment.ContextScanningResourceProvider" name="TibcoJMSReference">
could you help to resolve the issue?
Error
Operation failed with error: No resource named 'TibcoJMSReference/TibcoXACF'found

Hi,
I'm also looking for the same 'Configure and Use Oracle's JMS Connector with Tibco JMS to consume message'. If you have already implemented and working fine, please let me know the steps and some documents.

How to Build and Deploy Flex application in EP6

Hi All,
Can anyone tell how to build and deploy Flex application in EP6.
I want to build a normal application in flex and present it through iviews. How do I configure my Iiview to have flex component running in Portal Environment.
Thanks
Deepak

A good book to start with is Enterprise JavaBeans by Monson-Haefel (O'Reilly press). It covers deployment of EJBs on J2EE servers. Also check out sites specific to your server, sometimes they have specific requirements (like Weblogic).

How to create and deploy a simple jstl applicaton in weblogic 10.3.3

How to create and deploy a simple jstl applicaton in weblogic 10.3.3

1) Since JSTL libraries are provided as Web application libraries, they must be deployed before the Web application that is using JSTL functionality is deployed. The libraries can be deployed using the Administration Console or with the command-line weblogic.Deployer tool.
Here’s an example of deploying a JSTL 1.2 library using the weblogic.Deployer command-line:
java weblogic.Deployer -adminurl t3://localhost:7001
-user weblogic -password weblogic
-deploy -library
d:/beahome/wlserver_10.3/common/deployable-libraries/jstl-1.2.war
This command deploys the JSTL 1.2 library using the default library-name, specification-version and implementation-version defined by the MANIFEST.MF in the library.
After a library is deployed, the extension-name, specification-version and implementation-version of the library can be found in Administration console. This information can also be found in the MANIFEST.MF file of the library WAR file.
For more information on deploying a Web module refer below URL
http://docs.oracle.com/cd/E15051_01/wls/docs103/deployment/deployunits.html
2) To reference a JSF or JSTL library, a standard web application can define a <library-ref> descriptor in the application’s weblogic.xml file. Here is an example:
<library-ref>
<library-name>jsf</library-name>
<specification-version>1.2</specification-version>
<implementation-version>1.2.0</implementation-version>
<exact-match>false</exact-match>
</library-ref>
For more information on referencing a Web application library refer below URL
http://docs.oracle.com/cd/E15051_01/wls/docs103/programming/libraries.html
3) Create a sample JSP in your application and JSP should look as shown below
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
<html>
<head>
<title>TestJSTL</title>
</head>
<body>
<c:set var="topic" value="JSTL" />
<c:out value="${topic}" />
</body>
</html>
4) Create WAR and deploy and test.
Edited by: Murali Veligeti on Jul 26, 2012 9:00 AM

How to compile and deploy an ejb into Sun ONE app.server 7.0

I am new to Sun ONE application server. I Have .java files and deployment descriptor files with me. How should proceed. When i tried to use asant it is saying that build.xml not found. I copied build.xml from some other directory to the current directory. Then it is saying that common.xml not found. Please help.
Regards,
Nagaraju.

Hi,
The build.xml file should be in a directory from where
you are running the asant command.
To resolve the common.xml file not found error,
open your build.xml and check from which location the common.xml file is incuded.
In the sample application it is four directories above
the directory where build.xml is located.
You can copy the common.xml in the current directory and then change the following in your build.xml
<!ENTITY include SYSTEM "../../../../common.xml">
to <!ENTITY include SYSTEM "common.xml">
Hope this helps.
Get back in case you have more issues

How to build and deploy ejb in j2ee!!

HI there!!
Newbie Question. I know this is very rude to ask a question "How to build and deploy ejb in j2ee server??", but please help me. I just learned some servlets worked with tomcat. Now I want to learn more about ejb, could anyone suggest me any online tutorial or book where in it is explained step by step builiding and deploying ejb's in j2ee server, please help me. I would be grateful to you.

A good book to start with is Enterprise JavaBeans by Monson-Haefel (O'Reilly press). It covers deployment of EJBs on J2EE servers. Also check out sites specific to your server, sometimes they have specific requirements (like Weblogic).

How to Create and Deploy Web Services Using Oracle 9i JDeveloper

Hi,
My Question is how to create and deploy Web Services using Oracle 9i JDeveloper.Anybody please give me a detailed Reply.Please Reply to [email protected]
Hopr to Hear From you,
Regards,
G Sreekumar

You could use datasources. You should do this in your BC4J Configuration. Then when deploying your applicaiton use the command -installDataSource (from admin.jar) to create the right datasource.
You could probably use the name of your connection + "DS" so you can also use it locally in JDeveloper as JDev seesm to create this automaticly for your Connections.

Best practice for .war? Configure and deploy or deploy and configure?

In Apache Tomcat for example, I can deploy an app, stop the server, reconfigure the app in situ, then start the server again...
Is this recommended for deploying Java web apps to Oracle App Server 10g?
We currently have a consulting firm that is recommending to configure the web app before deploying. Sounds reasonable, except that they want this done via JDeveloper so that the Sys Admin can right click on the "deploy to OAS" button (ie: have the tools generate the .war file after configuration and deploy automagically).

Thanks for your feedback.
Are you aware of any way to use the *.deploy configuration file that is created by JDeveloper in an ANT script to create the .war or .ear file?
If not, I can picture the Sys Admin and developers groaning when they're told that they're JDeveloper web-app configuration cannot be used for production -- and that they must somehow duplicate that functionality in an ANT script!
I do have the below ANT scripts from Debu to do the deployment etc. But they only help after the .ear is built.
EAR file deployment:
<target name="deploy" depends="core">
<java jar="${j2ee.home}/admin.jar" fork="yes">
<arg value="${oc4j.deploy.ormi}"/>
<arg value="${oc4j.deploy.username}"/>
<arg value="${oc4j.deploy.password}"/>
<arg value="-deploy"/>
<arg value="-file"/>
<arg value="${this.build}/${this.ear}"/>
<arg value="-deploymentName"/>
<arg value="${this.application.name}"/>
</java>
</target>
Web application binding:
<target name="bind-web-app" depends="deploy">
<java jar="${j2ee.home}/admin.jar" fork="yes">
<arg value="${oc4j.deploy.ormi}"/>
<arg value="${oc4j.deploy.username}"/>
<arg value="${oc4j.deploy.password}"/>
<arg value="-bindWebApp"/>
<arg value="${this.application.name}"/>
<arg value="${this.war}"/>
<arg value="http-web-site"/>
<arg value="/${this.uri}"/>
</java>
</target>
Undeployment:
<target name="undeploy" depends="init">
<java jar="${j2ee.home}/admin.jar" fork="yes">
<arg value="${oc4j.deploy.ormi}"/>
<arg value="${oc4j.deploy.username}"/>
<arg value="${oc4j.deploy.password}"/>
<arg value="-undeploy"/>
<arg value="${this.application.name}"/>
</java>
</target>

Can anybody explain me how to sample and play audio files with logic's EXS2

can anybody explain me how to sample and play audio files with logic's EXS24 Sampler???
i cant find a way to upload and manage my own audio content on this sampler...

i uderstand , thanx...
i managed to open an audio file and placed it in the sampler,i can play t sample in the little keyboard in the zones section, howver i dont know how to play it with my controller... the sample shows in C1 on logic's keyboard but if i play C1 on my controller nothing happens... how can i fix this?
Also, i noticed the sample plays from beginning to end once i click on it, how do i do to just make it last until i release the key? like a logic sound??? (in case i want to play a small portion of the sample only)
Thanx

How to configure and start the BI-Scheduler?

hi experts,
as i am new to OBIEE, plz let me know how to configure and start (schedule the reports).
if any docs plz send to me..
Thank u.............

Hi,
please go the the oracle by example tutorials : Sending Alerts Using Oracle Business Intelligence Delivers
link : http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/delivers/delivers.htm
There is a step by step guide to configure the scheduler. This is a good starting point.
However there is also some advanced cofigurations that you will get in the Oracle® Business Intelligence
Infrastructure Installation and Configuration Guide-Chapter 10.
Hope this helps you.

Assistance in configuring and deploying OS to domain

Kindly provide info about in configuring and deploying OS to domain

Pls have a look, Best place to start , in and out
http://www.windows-noob.com/forums/index.php?/topic/4468-using-sccm-2012-rc-in-a-lab-part-7-build-and-capture-windows-7-x64/
http://www.windows-noob.com/forums/index.php?/topic/4512-using-sccm-2012-rc-in-a-lab-part-8-deploying-windows-7-x64
http://www.windows-noob.com/forums/index.php?/topic/5124-using-sccm-2012-rc-in-a-lab-part-15-deploying-windows-8-consumer-preview-using-configuration-manager-2012-rc2/
Video Pls
<cite class="_Fe">www.youtube.com/watch?v=99I354t500g</cite>
<cite class="_Fe"></cite><cite class="_Fe">www.youtube.com/watch?v=8uEvEVul1Vk</cite>
Thanks, Prabha G

How to configure a new product type with a new operation deal?

hello, All,
I wonder to know if somebody knows, how to configure a new product type with a new operation deal with the amortization divided?, I mean in the SPRO, portfolio of securities with the characteristics mentioned.
Hope you help me.
Bests regards.

Hi Prasad,
Thanks for the information, but the directions that you give me not be useful, I want that the UPDATE TYPE appears in the position cash flow in the transaction deal in the option-->operative valuation area( 2nd option) or in the report TPM13, this for two treasury ledger dates.
I mean that the update type "samxx" affect the accountant as amortization divided?, this transaction deal is a purchase.
Thanks in advanced

How to configure and deploy OAM 11g with DB setup using silent mode

Similar Messages

Maybe you are looking for