How to configure BAPI Source system in BW3.0B

Hi all,
I am using BW 3.0B, i am extracting CSV file from website and want to load its data into infocube for analysis, the problem is for this i need to configure BAPI source system and then i can use DBConnect functionality to get data from CSV,
please inform me how this is possible.
Thanks in advance.

Hi,
please read:
http://help.sap.com/saphelp_nw04/helpdata/en/50/63d6b37bda7f4a92e2dec21b14ceee/content.htm
regards
michael

Similar Messages

Error in ODI while configuring ERPi Source system

Hi All,
Hyperion Version : Hyperion 11.1.2.1
OS: windows 2008
I'm getting the following Error in ODI while configuring ERPi Source system in workspace.
"942 : 42000 : java.sql.SQLException: ORA-00942: table or view does not exist
java.sql.SQLException: ORA-00942: table or view does not exist "
can anyone guide how can achieve this. thanks in advance.
Regards,
Ravi

Hi All,
Please find the below error log from ERPi configurator [Workspace] and let me know further steps to solve this issue....
ERPI Process Start, Process ID: 71
ERPI Logging Level: DEBUG (5)
ERPI Log File: C:\Windows\TEMP\2\/aif_71.log
Jython Version: 2.1
Java Platform: java1.4.2_08
COMM Create Process Detail - Create Process Detail - START
COMM Create Process Detail - Create Process Detail - END
Error in Start PS HCM Setup Source System
java.lang.Exception: The scenario did not end properly.
at com.sunopsis.dwg.dbobj.SnpScen.a(SnpScen.java)
at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(SnpScen.java)
at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java)
at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.h.y(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
ERPI Process End, Process ID: 71
Thanks
Ravi

How to delete a source system in BW?

Hello All!
Can anone please inform me about the procedure to delete a source system or inform me in which document i can find this information. Actually i wish to assing my newly installed BW3.5 system to a new logical system (i.e) its currently assigned to some other logical system where it has ME as default source system. to change the logical system we need to delete all the source systems in the old logical syste. So please explaing me how to delete the source system Myself(current BWsystem). there is no data and no data sources existing in the system its abosolutly fresh.
Thanking you for help in advance
with regards
Ashwin Kumar Gadi

Hello Roberto!
Thanks for ur response. But there bo such delete option available under the context menu for the source system for the Myself source(current BW). only change buton appears but when we click that it say changes are no posible. Is the any other way to delete it manually.
with regards
Ashwin

Create source system in BW3.5

Hi all
can anybody tell me the procedure for creating source system in BW3.5 using automatic method at this time i create and assign logical system in both BW and R3 system and create Background users in BW system now my confusions are
1 Is this nessory that i create a diffrent user which is not dialog user in BW or R3 and
2 Thing is this nessorry that no pre created RFC connection present in R3
thx

hi,
i m listing down the steps with brief description, check if you r going that way.
1.you have same background user in BW and R/3 with proper autho.
2.you created new source system in RSA13, selecting first option of automatic creation.
3.you fill in all details correctly in popup window "Create R/3 Source System", that comes up.
4.pressing ok, it will ask you to log in as admin in target system. Before loggin in check client no, it may be diff e.g. 000, then change it to yr system client no.
5.next it will give you RFC destinations screen. goto tab "Logon/Security", give password for the user thr. save the changes.
6.you can check the connection by clicking "Test Connection" and try also "Remote Logon". If your password is correct, then it will log you in the system.
7.now everything is setup, so comeback. It will ask you to replicate/activate datasources from the source sytem. Click "Replicate as Well".
pls mark question answered, if you have no further doubts
Now it is finished.
Hope it helps.
Regards,
Purvang

How to Configure Transport MAnagement system in CHARM

Hi
How to Configure Transport MAnagement system in CHARM? Here our requirement is when ever a change request approved in the background Transport request should be created automatically. We have configured all the Transport Routes in our lanscape.
Can any one tell me the detailed process? If you have any Configuration document please share it to me
Points will awarded for helpful answer
Thanks
Bhaskar

In a two system landscape is it necessary to make development the domain controller always?
No such compulsion as such exist(correct me if wrong),however why you want to make production your domain controller?
This is not recommended.
Regards,
Ashutosh

How to configure Sun Java System Application Server Enterprise Edition 8.1

hi all,
How to configure Sun Java System Application Server Enterprise Edition 8.1 to my IDE..( jstudio)
I have installed jes for my windows system.. so that i have removed platform version of Application Server..
I try to add the Enterprise application Server (Sun Java System Application Server Enterprise Edition 8.1) to JStudio IDE..
but i couldn't;

Configuring your IDE to integrate with Sun App Server is something you probably will have to ask in some sort of JStudio forum. Other than for Netbeans, Eclipse, or possibly IntelliJ IDEA, you might not have much luck answering an IDE question here. I could be wrong though. Maybe somebody will have an answer for you and set me straight.

How to verify the Source systems connectivity with BWQ System.

Hi All,
I have diff source systems. And my requirement is to check the source systems connectivity with BWQ (BW Quality sys). please any body tell me the steps how to check the source system connectivity ?
Thanks & Regards,
Manju

Hi Manjula,
If you encounter problems when establishing a connection to your target server, check the following:
A message box appears while performing one of the following actions:
      Setting connection by choosing Apply to local session.
      Testing connection settings by choosing Test settings.
      Creating SAP TSQL objects
If errors occurred, they are displayed in the respective message box.
   Check developer trace files in ST11.
Test connection:
     For RFC related errors, check the RFC connection via SM59
     For database multi-connect errors, check if you can connect to the target SQL Server with the SQL Server Query Analyzer. Also check if the DBCON entries are correct.
Regards,
RK

How to assign the source system to the virtual provider

Hi
How to assign the source system to the custom virtual provider with services in BW 3.5 ?
Regards
PWnuk

Hi PWnuk,
Refer this link on how to implement a virtual provider with services.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4752ec2d-0a01-0010-ecb0-a145cf2e3e92
Hope this helps
Regards
Karthik

How to configure the Business Systems & Technical Systems into PI 7.0

Dear All
Kindly let me know how to configure the Business Systems and Technical Systems into PI 7.0
any word document/PDF would be very helpful.
Regards
Blue

Hi ,
You have to do the configure/creation of the Business Systems & Technical Systems in SLD.Generally this is maintained by Basis team in the Project.If you are looking to learn how to create BS and TS in SLD
You can find some useful information here on SLD concepts and creation of SLD
http://wiki.sdn.sap.com/wiki/display/XI/WorkingwithSystemLandscapeDirectory+%28SLD%29
Please refer this document for more understanding of SLD
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b00462bb-b7a0-2a10-8da6-f6b89834f8b4?quicklink=index&overridelayout=true
Regards,
Srinivas

Configuration of source system

Hi all,
I had a problem with the configuration of source system with bi 7.0 . i wanna know it is same as earlier. can any body help me plz. it urgent
Thanks n regards
KK

Hi Kannan,
To connect both systems you need a background user (like ALEREMOTE) in both systems.
In the source system creation, if you haven't created the RFC connection between BW and ECC you shouldn't select one (chek if DM0 is your ECC system), you should use the three fields below (app server, system ID and system number). Then enter both users and passwords (source system and local system).
In some moment you'll be prompted to log on to ECC, there you should use a DIALOG user, for example, your user. This user should have administrator rights (if you have SAP_ALL it's ok). ECC system should be open for modifications to be able to create the system.
If you still have problems with the users, just include SAP_ALL to both background users and should work.
Hope this clarifies.
Regards,
Diego

How to de-activate source system in BI system...?

How to de-activate source system in BI system...?
Regs,
Naren..

Hi,
I feel we cant de activate the source system. Either we can aceive to do any of the following method:
1. Delete the source system
2. Remove the RFC Destination.
3. Remove the authorization to load the data.
I dont know why you are asking to deactivate the system. Coz this will not cuase any problem to you for any testing in the landscape. One more thing if you will do any of the above three activity, then Basic guys only rollback the actual situation.
So please be confident before doing this task.
Regards,
Vivek V

How to Stop at Source System's Abap Code from BI Infopackage Trigger

Hi Experts,
I have enahanced 2 fields to some standard data source, that fields data is comiong fine to RSA3 in Source system.
i am not getting 2 fields data to BI PSA, but that 2 fields data i am getting at in RSA3 Tcode source system.
i have tried all the ways to get data to BI PSA, but no luck.
so, while running infopacke from BI i need to stop at Source System's Abap code where i have wriiten the code for those 2 fields.
so, please any one can explain, how to stop at source system's Abap Code once i trigger infopackage from BI.
Regards,
Nagaraju K.

Hi,
which data source on your working?
master data or transaction data
enter the TCODE- CMOD
choose the project
select the funciton exit - EXIT_SAPLRSAP_001 - Transaction data
                                    EXIT_SAPLRSAP_002 - master data attr
                                    EXIT_SAPLRSAP_003 - mster data text
                                    EXIT_SAPLRSAP_004 - master data hier.
choose the include program - ZXRSAU01.
go to source code tab -> go to change mode -> find the code will start form here
EX- : when " ZLIS_13_VDITM
if not required don't put break-point .
just comment it code.
Thanks,
Phani.

How DAC decodes its Source System Parameters into Informatica mappings??

Hi All,
I would like to know about "How DAC decodes its Source System Parameters into Informatica mappings??".
Is it an informatica mapping? or through a file? or its internal to DAC server?
Can we say the DAC server to decode it differently i.e. can we costomize the decode process? For example
$$START_DATE - i gave "Custom Format(1950-05-21 01.23.56) @MM/DD/YYYY" at dac - and it decodes as '05/21/1950' but I want it to decode as TO_DATE('05/21/1950','MM/DD/YYYY') is this possible?
Note that the informatica mapping takes the first decoding '05/21/1950' as number and through a sql error.....
Thanks for your time......
DK

Please set the values of $$FILTER_BY_SET_OF_BOOKS_ID, $$SET_OF_BOOKS_ID_LIST in DAC and check if the values get reflected in the parameter files that DAC generates for informatica at run time.
If this does'nt work, see if the BI services were restarted after doing change in the parameter file. The services need to be restarted in order to reflect the change.

Object type RSDS not supported in BAPI source system

Hi
We have a problem when trying to create Data Source in NW2004s with 3rd party tool 'Ascential Datastage' as source system.The error message is "DataSource XXX (DS-DEV): Object type RSDS not supported in BAPI source system".
Is there any note or patch avaialable to be implemented to resolve this problem.Our support package is 07.
Regards
D.Ellora
Message was edited by:
Ellora Dobbala

Hi Ellora,
The latest BI release in SAP NetWeaver 7.0 (2004s) includes a new type of DataSource for which staging BAPI has not yet been aligned.
Third party ETL tool vendors can therefore only implement their load processes using the original type of DataSource from BW 3.x. This DataSource is still provided in the new release without any changes. Upgrading to NetWeaver 7.0 (2004s) BI (BI 7.0) does not therefore endanger existing implementations based on BW 3.x and NetWeaver 2004 (BW 3.5).
It is also possible to migrate third party ETL implementations based on BW 3.x into the new data-flow concept of a NetWeaver 7.0 (2004s) BI environment using new DataSources, transformations (also new), and data transfer processes (DTP) (also new). This is possible because the system provides an emulated view for BW 3.x DataSources, which makes it possible to combine them with NetWeaver 7.0 (2004s) transformations and DTPs for regular batch load processing (this does not include direct access and real-time data acquisition (RDA)).
This allows the benefits of the new data loading concept to be made available in such third party ETL-based loading scenarios.
Regards,
Anil

How to transport FM retraction configuration if source-system changes?

Hi experts,
I have configured FM retraction in ERP through SPRO connecting it to my Dev source system in my Dev ERP. What do I need to do to transport this configuration to my production ERP and make sure the BI source-system changes from Dev to Prod as well? Is there some kind of souce-system mapping as there is in the BI side for the extraction?
For example, I have everything set-up for source-system BWD and I want it to change to BWP when I transport the configuration from ERP dev to ERP prod.
Thanks
Edited by: Pedro Fontes Pais on Dec 2, 2008 6:36 PM

Hi Christian,
Thanks for your reply, but I didn't get anywhere in OKE7 & OKE8 to include the credit records I made in KSAZ in a Transport.
Can you elaborate it more.
Thanks
Amit Goyal

How to configure BAPI Source system in BW3.0B

Similar Messages

Maybe you are looking for