How to configure bpm composer and access the projects present in bpm mds re

To access the bpm composer I performed the below mentioned steps: - Installed the standalone weblogic server with soa server configured
- Invoked the bpm composer using the url : http://machine:soa_port/bpm/composer
- Used weblogic and weblogic1 as username and password.
Please let me know whether I am following the correct approach as I am not able to see any options in bpm composer like open project etc, the project menu appears but there are no projects visible.

The answer couldn't help us much. I will give you the steps we have followed in detail
We have created a sample customizable BPEL process by selecting a Customizable checkbox in Jdev.
Then,The sample BPEL process is deployed to SOA server from JDeveloper. We could see the deployed BPM process in EM console.
Also the MDS repositories required for customization too are present in EM.
Then We tried accessing the BPM Composer to do some customization on the sample BPEL process deployed. We are able to login to the BPM composer using "weblogic" user.
But the composer displays only the welcome page. There are no other links enabled.
Please let us know How to make a BPEL process customizable using BPM composer.
Also there is an another SOA Composer. When this composer is mainly used?
There is another BPM Workspace console. But we could not login to this using "Weblogic" user though we are able to login in EM, SOA and BPM composer.
Why the login failed uisng "weblogic" user here?What for this console is used?

Similar Messages

  • Imovie '11 won't let me share a specific project it says "quit imovie and reopen" how do i fix this and share the project?

    imovie '11 won't let me share a specific project that is no different from all the other projects.  Every time I try to share or export the project it says "quit imovie and reopen" this can't be a memory problem because I have a lot of memory left and it allows me to export other projects but just not this one.  How do i fix this and share the project ASAP?

    Check the connection settings.
    *Tools > Options > Advanced : Network : Connection > Settings
    If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
    See "Firefox connection settings":
    *https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • I have purchased a movie and it has downloaded.   Next, I get a screen the says Terms and Conditions. It says to click Agree but I. Can not find Agree anywhere in the document.  how do I move forward and access the movie?

    I have purchased a movie and downloaded it. Next I get a screen that says Terms and Conditions and tells me to read and click on Agree. I cannot find the Agree anywhere in the document.  How do I move on and view the movie?

    Go to Settings>General>Usage. How much space does it show you have?
    If you connect your phone to your computer, what does iTunes say is on your phone? Do you see a large amount of "Other"? If so, you may have a corrupted database. You'll need to sync your phone then restore it as NEW (not from back up) then re-sync your data).

  • When I access my google e-mail account on the I-pad my inbox has at least 6 e-mails with no sender and no subject (absent via I-phone, Mac or PC) I cannot delete them as they cannot be selected- how do I stop them and clear the ones there now?

    When I access my google e-mail account on the I-pad my inbox has at least 6 e-mails with no sender and no subject (absent via I-phone, Mac or PC) I cannot delete them as they cannot be selected- how do I stop them and clear the ones there now?

    Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
    If that doesn't work then try closing the Mail app completely : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT2404 my hard drive crashed and nothing recoverable.  Apple installed a new drive.  How can I go back and download the apps I had purchased for my previous configuration, for instance Lion 10.7, and Photoshop Elements 10?

    My hard drive crashed and nothing recoverable, local Apple Store installed a new drive.  How can I go back and download the apps I had purchased for my previous configuration, for instance Lion 10.7, and Photoshop Elements 10?

    A blank drive needs to be formatted first, you do that hold c boot (or hold option key boot) from the 10.6 install disk (or Lion USB)
    Read how to format the drive in Disk Utility here
    https://discussions.apple.com/docs/DOC-3044
    How to install OS X
    https://discussions.apple.com/docs/DOC-3251
    Software Update fully,
    Hold the option key and click on Purchases when in MAS to download your 10.7 etc.

  • How to configura multiple ldap server to the sun access manager

    Hi,
    please help how to configure multiple ldap server to the sun access manager, for example access manager does't find the user in ldap1 then it should search in ldap2.
    Thanks
    Mouli

    There�s no need for deleting the default amSDK based datastore because it�s needed for some default accounts.
    You may try to create the datastore using the commandline (amadmin)
    Have a look /etc/opt/SUNWam/config/xml/idRepoService.xml
    You may also try to create amadmin account in the external ldap directory.
    (Un)fortunately i�ve never tried to remove the default datastore.
    -Bernhard

  • HT5699 I forgot the answers for security questions, how can I reset them and get the access back to the iTunes store?

    Need help to get access to iTunes store. I bought an iTunes card bor buying on iTunes store.
    I forgot the answers for security questions, how can I reset them and get the access back to the iTunes store?

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support or Apple to get them reset.
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or you could change to 2-step verification : http://support.apple.com/kb/HT5570

  • How can I safely transfer my 125GB of itunes music files to free up space, but still keep itunes on my MBP, and access the music with the cloud and match?

    I have already backed up all the itunes files on two different external drives. And I have already set up icloud and itunes match. I am still paranoid about deleting the files from my MBP, but I need to free the space. What steps should I take to delete the files. And can I still keep itunes (w/o all the music files) on my laptop and access the music from the cloud? I know I can run them with the external drive plugged in, but looking for a way to do it w/o pluggin in.

    I have tried that as well.  The purchased songs are not in my playlists and they are still there.  I manually deleted them on the phone but the sync puts them right back on there.
    I only sync playlists and they aren't on there. 

  • How to create individual user to access the proxy service in osb

    Hi all,
    i have created a osb project. i need only one user to access the project with particular user name and password. The project should result in error if any other credentials is being given.
    The challenging part is that it should return a error message even when the user name and password is left blank. can anybody help me to resolve this issue?

    I'm guessing you're getting a 401 error back in soapUI. If so, this is because soapUI needs to send some credentials which match that user exactly.
    How would that user invoke the service normally - with an embedded WSS user / password in the request, or with an x509 cert + Identity Assertion? SoapUI will have to do the same as the client application does.
    In our environment, we use client certificates as authentication. Soapui is very good at presenting a client certificate if you have a .jks keystore with an identity cert. Since the role will only accept a single particular user, you would either have to expand the role to allow some admin access or have a certificate which presents the same CN value ( to map with identity assertion).
    If the client app uses username / password, the 'request properties' window ( lower left in soapui ) has properties for Username and Password which can be configured. This may allow soapUI to submit that user, but I haven't tested that.
    There's also the "Aut" tab in the request window which also allows the same.

  • How to configure sales forcast and assign marketing budget

    how to configure sales forcast and assign marketing budget

    Hi,
    As per my knowledge i am telling forecasting is done by Historical Data { MM & PP Module }
    when you collect the data based that we have to plan every month how much you want to procure the raw material etc..,
    that should be entered in the material master under "Forecasting" tab there we have to maintain monthly wise forecasting values
    i think it should get some idea if i wrong please clarify
    Regards,
    Prasanna

  • Problems after downloading the lastest version of iTunes for my iPod Touch. Now whenever I switch on my laptop and access the internet I get an error message. 2nd time this has happened and I'm fed up trying to fix it. Anybody having similar problems?

    I've downloaded iTunes 10.5 onto my iPod Touch, no problems but I've now got a constant error message on my laptop everytime I switch it on and access the internet. The message is "The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll"
    This is the 2nd time this has happened. Last time iTunes Support called and we ran through a load of checks to no avail. The only option was to delete iTunes completely off my laptop and go for a new download of it. Can anybody tell me how to do it - didn't write it down last time, silly me, never thought it would happen again. Also sent an email to iTunes Support - waiting for a response.

    Maybe:
    "Waiting for changes to be applied": Apple Support Communities
    Also I requested that your email address be deleted. Personal responses are not given in this forum

  • How to Configure E-mail and Chat functionalities

    Dear all,
    How to configure E-mail and Chat functionalities for IC Webclient.
    through IC Webclient ICI interface how can we configure E-mail functionality, As per my understanding, E-mails can be handled in a similar way of receiving phones.
    Where these E-mails can be stored?, Where we define agent E-mail id?
    being ICI is a multi channel support does it need SMPT server support? If No, would there be any difference in the functionality?
    How does CHAT functionality works?
    Please educate in above scenarios to get a better understanding.
    Your help will be highly appreciated.
    Best wishes
    Raghu ram

    Do you make any effort to search for your answers before you post your questions?  ERMS is the email response system
    The 2nd post on this board - Documentation for Interaction Center (IC) WebClient
    There is tons of stuff here to answer your questions as well as show you the configuration.  You need a 3rd party CTI solution to do chat that you will read about in the blog.
    SAP Notes
    759923 Frequently Asked Questions about IC WebClient
    940882 Frequently Asked Questions about ERMS
    882653 Frequently Asked Questions about Agent Inbox
    1114557 SAP CRM 2007 Internet Browser Releases
    1118231 Supported user interfaces for SAP CRM
    981710 Support for Microsoft Internet Explorer 7.0
    1144511 Blank screen when starting CRM WebClient or IC WebClient
    1115493 CRM Web UI: Mandatory SICF services for CRM framework
    992848 Mandatory ICF nodes for CRM WebClient UI Framework
    IC WebClient Consultant Cookbook for CRM 2005
    Online Documentation
    Online Knowledge Products
    Blog: How to Configure Contact Center Simulator User Interface (CCSUI)
    Blog: What is Computer Telephony Integration (CTI)

  • How to configure a VME device within the software?

    I've got a VME-MXI-2 interface cobnnected to a VME crate. I'm using the ni-vxi driver to access the VME cards in the crate. I can't configure the VME configuration manually using the tools for variuos reasons. So I tried to do it directly in the software using CreateDevInfo and SetDevInfo functions. But although GetDevInfo shows me the same information about the device as it does when I do a manual configuration, I can't access the device. (bus error, but it doesn't access the VME bus at all) Is it possible at all to configure a VME device only from the software and not doing it manually? If yes, what else do I have to do apart from creating the device with CreateDevInfo and SetDevInfo?

    Frank,
    Unfortunately, the CreateDevInfo and SetDevInfo commands do not function as you were expecting. These change the device information for that program only.
    Resources (such as Memory Addresses) have to be mapped across the MXI-2 interface, and Resman performs the mapping based on the configuration information. The reason you get a bus error when trying to then access the device is because the memory mapping across the MXI-2 has not been done for the address ranges configured by SetDevInfo because resman has not run.
    After setting the information programmatically, you would have to close that program to run resman. Since the settings are localized to the program you just closed, resman would not map the device information.
    If you used an embedded controller, you could read and write directly to the address on the device. You would not have to configure the devices at all (manually or programmatically) because you have direct access to the VME backplane.
    There is not a way to programmatically configure VME devices. However, there are options in MAX to enable and disable the various VME device profiles. So you could create all of the different VME devices you will be using, and then enable/disable according to the current configuration. Also, NI-VXI 3.2 includes tools so that you can import and export VME device information in to and out of MAX.

  • I'm moderating a competition which will be about 8 hours long. I need to have a video/audio recording of the whole thing incase an answer is contested. We will need to stop recording and access the footage as the day progresses. Any suggestions?

    I'm moderating a competition which will be about 8 hours long. I need to have a video/audio recording of the whole thing in case an answer is contested.
    We will need to stop recording and access the footage as the day progresses. Any suggestions as to how best to accomplish this? I have an iPad and a Macbook Air.
    Many thanks!

    I'm moderating a competition which will be about 8 hours long. I need to have a video/audio recording of the whole thing in case an answer is contested.
    We will need to stop recording and access the footage as the day progresses. Any suggestions as to how best to accomplish this? I have an iPad and a Macbook Air.
    Many thanks!

  • Setup mySQL and access the same from jsp

    Hi,
    I have installed the MySQL in local desktop in d: drive. As per the documentation, have created my.cnf file to point sql directory in d drive.
    Now I dont know how to proceed further. I need to see if MySQL installation is fine, create table and access the data in jsp page. Please advice.
    Thanks in advance.

    For MySQL help try a MySQL forum.
    For connecting to the database, use JDBC. You can get the MySQL JDBC driver from www.mysql.com.
    From there just follow standard java database connection setup.
    http://java.sun.com/docs/books/tutorial/jdbc/index.html

Maybe you are looking for