HOW TO CONFIGURE CALLBACK IN WINDOWS-XP AND WINDOWS-98

Dear Friends.
We have Cisco 3640 with 8 PORT Asynch/Synch card (Low speed) card.The serial port is configured with asynch mode and the normal dialup modem is connected with that port.The callback is configured in the port.
kindly help me to configure CALLBACK FEATURE IN CLIENT END WINDOWS-XP and WINDOWS-98.
Thanks in advance
regards
nagarajan

Hello Nagarajan,
not sure if this works, but under the 'Advanced' settings of your modem in Windows, there is an option for 'Initiation Strings', if you type 'AT S0=1' in that field, that enables the callback security. I don't know if this works with the Cisco though...
Can you try that and see if you get it to work ?
Regards,
GP

Similar Messages

  • How to Configure MS Exchange 2007 CCR and SCC Cluster in a single system

    Hi i want to configure ms-exchange 2007 server for both SCC and CCR. i have two Windows Server 2008 on running on my hyper-v. by using cluster on both hyper v i want to install MS-Exchange 2007 for both SCC and CCR. ideally one windows server 2008 has
    Active Nodes and another one has passive nodes. please guide me as i am new in the field

    Duplicate of
    http://social.technet.microsoft.com/Forums/exchange/en-US/edea43a1-59b4-4d26-9b41-76d0f4677095/how-to-configure-ms-exchange-2007-ccr-and-scc-cluster-in-a-single-system?forum=exchangesvrgenerallegacy#c6e08365-c01a-40aa-a8bc-94219757ef13
    Blog |
    Get Your Exchange Powershell Tip of the Day from here

  • How to configure MDT tool kit files and UDI settings to enable lite touch installation

    please assist me for lite touch installation. i have integrated MDT 2013 with SCCM 2012 R2 then not sure what next? like how to configure MDT tool kit files and UDI settings to enable lite touch installation

    Here are some examples:
    http://www.windows-noob.com/forums/index.php?/topic/5250-using-sccm-2012-rc-in-a-lab-part-18-deploying-a-udi-client-task-sequence-with-mdt-2012-rc1-integrated-in-configuration-manager-2012/
    http://damonjohns.com/2013/08/20/integrating-udi-into-your-sccm-osd-task-sequences/
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • How to configure Oracle SSO for forms and apex

    Hi All,
    I am trying to configure oracle SSO for forms and apex using third party external authentication. Please help me how to configure. I a have tried all possible things
    from web but I am not able to do it. Is there any doc or links are much appreciated.
    Info: Some reason my oiddas web link is not working it used to work fine before and also the from /pls/orasso/ link I am not able to login may be because of my oiddas issue
    Thanks

    Hi Andreas,
    Thanks you for your help. I am trying to implement third party external LDAP authentication for APEX and Forms.
    So I started with OID and SSO setup to create external Partner Applications. Some reason my oid and sso web login links are not working. I didn't find any errors. I need some help in finding the problem and direction, I already read docs on web but no proper direction. I appreciate your help.
    Thanks

  • How to configure a COM domain, IPv4 and IPv6

    Hi,
    I am a new user on the Mac Server, but I have experience in Linux, my problem would be to understand how I configure the Mac Mini Server during installation or after installation, to assign a COM domain.
    I would like to configure only the service Apache, FTP, MySQL.
    My internet provider, today provided me 4 static IPs IPv4 and 4 IPv6, to use, now I want also to configure two local DNS if possible:
    IPv4:
    www.mydomain.com
    ftp.mydomain.com
    mysql.mydomain.com
    IPv6:
    www6.mydomain.com
    For if I can configure DNS in Dual Stack or if I have to record them in a different way.
    A control panel is currently not able to find it, you can advise me if something is well accepted, the important it is for business use as I would like to configure the server is for private use.
    I hope I was clear, I'm sorry but I do not speak perfect English.
    Thanks in advance to all.

    To be clear, in your example you only have one domain - mydomain.com - all the other entries are just host records within that domain.
    For your IPv4 hosts just add standard A records:
    ftp  A  1.2.3.4
    www   A   1.2.3.5
    mysql  A  1.2.3.6
    For your IPv6 hosts just add AAAA records:
    www6    AAAA 1234::ab:cd:ef
    I seriously doubt you want to put your MySQL server on a public IP address, though, so I'd look carefully at your network setup before going much further.

  • How to configure Appointment, Phone Calls,Task and Emails

    HI All,
    I have requirement to build the Appointment, Task, Phone Calls and Emails as in the standard.
    Same like it is available in the Opportunity Sales Activity.
    Can you please suggest how to configure the same
    Thanks & Regards,
    Malkit Singh

    Hello Malkit,
    Does this blog from Alessandro Iannacci helps you?
    HTH,
        Horst

  • How to configure AD on windows 2012 server for Exchange 2013 internal and external email flow

    Dear Experts,
    I have to configure exchange 2013 on Windows server 2012 STD. Company has registered Static IP addresses and can get the MX record pointing to any of this Static IP.  
    The registered domain name is e.g.  contoso.com. 
    a. What should I use as domain name on AD? contoso.com or contoso.local
    b. Is it recommended to have two different servers  for AD and Exchange?
    c. What should be my connector settings for mail flow?
    d. how can I set 2 email servers in company for load balancing?

    Hi,
    a, I suggest use contoso.com as domain name. It is convenient to add urls into our certificate for internal and external mail flow.
    b, Recommended that installing AD
    and Exchange Server on two separate
    Servers. If Exchange Server downed unfortunately, it can prevent AD server from crushing at the same time.
    c, Found some articles for your reference:
    Configure Mail Flow and Client Access
    http://technet.microsoft.com/en-us/library/jj218640(v=exchg.150).aspx
    Configuring Outbound Mail Flow in Exchange Server 2013
    http://exchangeserverpro.com/configuring-outbound-mail-flow-in-exchange-server-2013/
    d, Load Balancing
    http://technet.microsoft.com/en-us/library/jj898588(v=exchg.150).aspx
    Hope it is helpful
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • How to configure DNS to support ipv4 and ipv6

    I have a 2008 r2 domain controller in my lab.
    i'm doing Exchange 2007, 2010 and 2013. I have mix Windows 2008 r2 servers for other applications.
    i'm running into issues where i'm thinking it is time to have both IPV4 & IPV6 to run on all lab machines.
    I can't get a clear picture on how to accomplish a mix environment. in the DNS administrator do I create a new "reverze lookup zone" with only the IPV6? or do I have to create a new record in the "forward lookup zone" to with both IPV4
    & IPV6 which the later points to the new "reverse lookup zone".
    I see a lot of internet article but little on "how to".
    or on the DC should I enable the DHCP role to support the IPV6?

    1. You assign an IPv6 address to the domain controller/DNS server
    One method is letting this site (legitimate) create a random private IPv6 range for you:
    http://www.simpledns.com/private-ipv6.aspx
    For example:
    fd06:fcde:8b4e:d6bd:xxxx:xxxx:xxxx:xxxx
    You can configure the x's like this (you cannot leave the x's there):
    fd06:fcde:8b4e:d6bd:0000:0000:0000:0001
    If you close and open IPv6 properties, or do an "ipconfig /all" you'll see that the IPv6 is abbreviated as follows:
    fd06:fcde:8b4e:d6bd::1
    That's normal.
    If you look in your forward lookup zone, you'll now see this IPv6 address (you may have to register that manually - ipconfig /registerdns - but it seemed to happen automatically for me.
    So there is no need to create a separate forward lookup zone for IPv6.
    OK, but what about the reverse zone?
    2. Create reverse lookup
    In DNS Manager (what you call administrator), right-click on reverse lookup zone, select New Zone, click, Next, Next (default values are fine) until you choose between IPv6 and IPv4. Selecft IPv6 of course.
    Then enter your prefix as shown here:
    That's it. The reverse lookup information is configured automatically (your prefix " backwards").
    Now, unlike with the forward lookup zone, my domain controller does not seem to be registering its name in the reverse IPv6 zone: there's only the SOA and NS record.
    But that's another question.
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • New Outlook 2013 Installation - How to configure for default pop email and access exchange 2003 server for shared folders only

    I have successfully installed and configured outlook 2013 to access my pop.integra.net email accounts.  We have an 2003 exchange server we use for shared folders which I am having difficulty accessing.
    My preference would be to set up my access to the exchange server and use the same data folders for email as are in use for my pop email account.  In outlook 2003 this was simple, but in 2007 on up it seems this feature has been hobbled.  Is there
    a workaround to get both accounts to use the same database?
    Next issue is if I use the Mail client wizard under Control Panel to set up access to the exchange server - everything looks fine but when launching outlook I receive the following 2 error messages:
    "The resource that you are trying to use is located on an unsupported version of Microsoft Exchange.  Contact your e-mail administrator for assistance."
    "Cannot start Microsoft Outlook. Cannot open the Outlook window. The set of folders cannot be opened.  Your Microsoft Exchange administrator has blocked the version of Outlook that your are using.  Contact your administrator for assistance."
    Obviously the optimal solution is to upgrade the Exchange Server - assuming that is not an option - are there any workarounds?
    Any assistance would be appreciated.

    Downgraded to Office 2007.
    So now have a new Windows 8.1 laptop with outlook 2007 installed.
    From what I have been told this should allow me to connect to the Exchange2003 server
    I set up the pop account - works fine
    set up the exchange account through Mail.exe and am unable to launch outlook.
    "Microsoft Exchange is Unavailable"
    "Retry - Work Offline - Cancel"
    Then
    "Cannot start Microsoft Office Outlook.  Cannot open the Outlook Window.  The set of folders cannot be opened.  The information store could not be opened."
    The data file path is the same for both the pop account and the exchange account:
    C:\Users\Scott\app data\local\microsoft\outlook\outlook.pst
    How do I get this to work?
    Help!

  • How to configure XMLP as Windows service

    I installed XMLP on Windows Server 2003. It works fine when I login in and start the server directly. How can I configure the server so that it start when the server is rebooted without having to lgoin as a user and start it directly? I work mostly in linux, and my windows support folks are baffled. <sigh>

    Im being lazeee here and have not had time to test this but I found
    http://radio.weblogs.com/0132383/stories/2004/04/28/oc4jAsAWindowsService.html
    The XMLP server runs inside the OC4J J2EE container so it should work. If you try it please let us know how you get on?
    Regards, Tim

  • How to configure Airport Express N router and Netgear G router with Extreme

    I have a primary Netgear G router (WRT54G) connected to my cable modem box. I have an Airport Express N router streaming music in another room and also extending the wireless network.
    I am planning to demote the Netgear router as a switch + wireless network extender connected to my home theater setup (dish+apple tv+ps3) and purchase a new dual band Airport Extreme connected to the cable box and acting as the main router.
    My question is if its possible for the N devices to still use N network while the G devices not demoting the whole wireless network to G? That's the reason why I want the Extreme. If yes, how to go about doing it? If not, I will just buy a cheap switch and use that for the Home theater and leave the current setup alone. Anyone who has a similar network, please advice. Thanks!

    My question is if its possible for the N devices to still use N network while the G devices not demoting the whole wireless network to G?
    Yes. To do so, you would need to connect the Netgear to the new 802.11n AirPort Extreme Base Station (AEBSn) by Ethernet, and then, reconfigure it as a bridge (disable both its NAT & DHCP functions).
    In this configuration, the AEBSn & AXn can provide the 802.11n network and the Netgear can provide the 802.11g network.

  • How to configure the permission between folders and groups programlly?

    Hi guys,
    I am developing extension for permission, here I have a question:
    I have a template which contains more sub folders, for each folder the corresponding group should be assigned by certain permission. for example: group g1 has "write" permission to folder f1; group g2 has "read" permission to folder f2 and so on. I assign these permissions by extension programlly. But now I have to provide the possibility (to user) to configure these permissions, that means if in future instead of group g1 has "write" permission to folder f1, group g1 has "read" permission to folder f1. This  kind of change should be allowed by extension. Should I set folders and groups as input parameter in an extension, and give the user possibility to input permission type? In another word, my program is supposed to get the permission from GUI and then create ACL. But where can I set the possibility for user to define the permission? And how can I read this permission?
    I hope I explained it clearly enough.
    Any help is greatly appreciated!
    Regards,
    Liying

    Hi jennifer,
    Find this usefull, follow steps at PAGE 3,
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/419b479b-0801-0010-f8a1-c26208b4b209
    Regards
    Juan

  • How to configure HA between local controller and remote controller in DC

    Good day,
    If I have two Cisco 5508 Controllers, running Software version 7.4, how would my failover happen when the AP's run in local mode, and the local controller fail, and you configured your remote controller as your secondary controller.  Question is, will the APs automatically convert to FlexConnect mode when they failover to the remote controller in the DC?  I know you cannot configure HA as the controllers have to be connected with ethernet copper cable on the redundancy port, giving you a distance limitation of 100m.
    Thank you in advance
    Adrian

    Hello ,
    As per your query i can suggest you the following solution-
    In wireless network deployments that run controller versions earlier than 5.0, when a controller goes down, it takes a long time for all the APs and the associated clients to move to a backup controller and for wireless service to resume.
    The features discussed in the document are implemented on the controller CLI in WLC software release 5.0 in order to decrease the time that it takes for access points and their associated clients to move to a backup controller and for wireless service to resume after a controller goes down:
    In order to reduce the controller failure detection time, you can configure the heartbeat interval between the controller and access point with a smaller timeout value.
    In addition to the option to configure primary, secondary, and tertiary controllers for a specific access point, you can now also configure primary and secondary backup controllers for a specific controller. If the local controller of the access point fails, it chooses an available controller from the backup controller list in this order:
    •o primary
    •o secondary
    •o tertiary
    •o primary backup
    •o secondary backup
    The access point maintains a list of backup controllers and periodically sends primary discovery requests to each entry on the list. You can now configure a primary discovery request timer in order to specify the amount of time that a controller has to respond to the discovery request of the access point before the access point assumes that the controller cannot be joined and waits for a discovery response from the next controller in the list.
    Hope this will help you.

  • How to configure Oracle RAC for Wiki and Blog

    Has anyone done Oracle RAC configuration for Oracle Wiki and Blogs?
    Thanks,
    Frank

    Hi Andreas,
    Thanks you for your help. I am trying to implement third party external LDAP authentication for APEX and Forms.
    So I started with OID and SSO setup to create external Partner Applications. Some reason my oid and sso web login links are not working. I didn't find any errors. I need some help in finding the problem and direction, I already read docs on web but no proper direction. I appreciate your help.
    Thanks

  • How to configure Integration B2B to request and process AS2 Sync MDN

    Hi,
    Is it possible to configure B2B to request and process sync MDN in Custom Document Over Internet scenario?
    I have set up the TP Delivery Channel's Acknowledgement mode to Sync but It does not work for outgoing documents. Our trading partner sends back MDN over the same https connection but it only results in an error. The business message status of is Wait Ack for few minutes and then changes to Error:
    Business Message Details
    Collaboration          
    Revision          
    Business Action          PROCESS
    Revision          1
    Process Protocol          
    Exchange Protocol          AS2 - 1.1
    B2B Message Id          1036
    Protocol Message Id          <1036@as2test>
    Protocol Collaboration Id          
    Receive Time Stamp          April 21, 2009 2:37:43 PM
    Send Time Stamp          April 21, 2009 2:37:43 PM
    Acknowledge Mode          Sync
    Reply Mode          Async
    Agreement          TP_TEST_AGR
    Message Date Time          April 21, 2009 2:37:43 PM
    Error Code          AIP-50079
    Message Type          
    State          Error
    Remaining Retry          0
    Acknowledge Type          Document Exchange
    Direction          Outbound
    Time To Acknowledge          
    Sending Trading Partner          HOST_TEST
    Wire Message          View
    Correlated Message          
    Payload          Payload
    Transport error: [IPT_HttpSendError] HTTP encounters send error :.
    Premature EOF encountered
    Also our trading partner reports that he gets the message six times during the time between Wait Ack and Error status and each time send Ack. Nothing is visible in b2b.log in that time.
    When we switch to Async Ack, B2B also sends message six times and each time receives Async MDN. This time however, each MDN is received and processed correctly. Our request has status Complete, until the 6th Ack is received, then it changes to the same error as above.
    Have any of you experienced above error? Is it at all possible to process AS2 MDN's correctly especially in Sync mode?
    Thank you in advance.

    Just consider your BPM is receiver, and sender:
    Src --> BPM  (BPM is Receiver)
    ==========
    Sender Agreement (If it is IDOC or HTTP, then you do not have to create)
    Commnunication Channel
    Receiver Determination
    Interface Determination    
    BPM --> Target (BPM is sender)
    ============
    Receiver Determination
    Interface Determination    
    Communication Channel
    Receiver Agreement
    If your BPM interact with other systems, you will have more Receiver Determination and Interface determination, possible Receiver agreement
    Hope this clear your doubts
    Liang

Maybe you are looking for