How to configure eclipse so that it can connect to remote weblogic

Hi^^,
I have developed a project in eclipse WTP europa.
Now I want to debug it using weblogic server. I am not allowed to install and run the server from my local machine. The server is installed at a remote location location whose IP address is avaliable.
Can I run this server as a plugin from eclipse WTP that I have installed or I will have to physically deply the war file on the remote server and then see if its running properly or it has got any errors.
My question once again is can I somehow connect to this weblogic server on the remote machine from eclipse WTP.

Hi^^,
I have not received any replies. Does this mean that I cant connect Eclipse WTP to a weblogic sever hosted at a remote location.??????

Similar Messages

How to configure workshop so that I can extend PageFlowRequestProcessor?

Hi
I am using workshop 8.1.4, and basically I have a requirement where I would like to extend the com.bea.wlw.netui.pageflow.PageFlowRequestProcessor and add some application managed security within the processRoles method to my own class. Workshop generates all the struts config files for the page flows during a build and the default processor is configured as com.bea.wlw.netui.pageflow.PageFlowRequestProcessor.
Does anyone know how to specify a custom processor for the generated files?

@Jpf.Controller(strutsMerge="/struts-config.xml",
          simpleActions={
               @Jpf.SimpleAction( name="index", path="/portlet2/index.jsp")
               ,@Jpf.SimpleAction(name="edit_category", path="/portlet2/EditCategoryController.jpf")
I use this annotation, strutsMerge point to struts-config.xml at my source folder : src. after a clean, the generated file use my TilesProcessor as well.
my struts-config.xml:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 1.1//EN" "http://jakarta.apache.org/struts/dtds/struts-config_1_1.dtd">
<struts-config>

<controller className="org.apache.beehive.netui.pageflow.config.PageFlowControllerConfig" inputForward="true" processorClass="test.struts.SpringAutowiringTilesRequestProcessor">
<set-property property="isReturnToPageDisabled" value="true"/>
<set-property property="isReturnToActionDisabled" value="true"/>
<set-property property="sharedFlows" value=""/>
<set-property property="controllerClass" value="portlet2.Portlet2"/>
<set-property property="isMissingDefaultMessages" value="true"/>
</controller>
</struts-config>

How to configure eclipse to debug while running tomcat

Hi
I using Eclipse 3.1, jdk 1.5 and tomcat 5.5 in my project
how shall i configure eclipse, so that i can debug while tomcat is running in eclipse.
it is not remote debugging, i want to debug it my PC.
when i click Run->Dedug, i get a options window
I will create new java application
Now, What shall i specify for:
Main class: (is it org.apache.catalina.startup.Bootstrap, but it is not working)
Program arguments:
VM Arguments:
Regards
Syed

Have you installed the Tomcat plugin for Eclipse? http://www.sysdeo.com/eclipse/tomcatplugin
If so, you need to create a new Tomcat project using the wizard:
File->New->Project... then choose Java->Tomcat Project
In the wizard, choose a project name, then uncheck the 'use default' checkbox in project contents and browse to your webapp's directory (within Tomcat/webapps). Then finish the wizard.
Start Tomcat from within Eclipse - you can then add breakpoints etc to debug
Regards,
Martin

How to Bridge Actiontec GT704WGB modem/router combo so that I can connect external wireless router?

I am having a hard time to bridge the actiontec GT704WGB
On verizon site there are instructions but they are only for GT704WG without the B. B I beleive is a more latest modem/router combo.
Can anyone please help me guiding on how to setup the actiontech GT704WGB to Bridge mode so that i can connect external router to it?
I would really appreciate a prompt response.
Thanks
Alish

http://www22.verizon.com/ResidentialHelp/HighSpeed/Networking/SetUp/Actiontec704WG/123754.htm
Try this link for details.

HT5312 I forget my answer of two security questions, there is a typo error in rescue email address. How to resolve this so that I can use my Apple ID for online shopping?

I forget my answer of two security questions, there is a typo error in rescue email address. How to resolve this so that I can use my Apple ID for online shopping?

You won't be able to change your rescue email address until you can answer your questions, you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to correct your rescue email address for potential future use

I purchased the adobe pdf converter program, however, I am now using a new computer and I need to know how to retrieve it so that it can work on my new computer.

I purchased the adobe pdf converter program, however, I am now using a new computer and I need to know how to retrieve it so that it can work on my new computer.

What exactly did you purchase: Acrobat, or the ExportPDF / PDF Pack online service?

How to setup 9ias so that we can have different profile to cater for 2 DADs

Dear Sir,
How to setup 9ias so that we can have different profile to cater for 2 DADs with the same name pointing to different database.
For example:
/pls/users --> pointing to database 1
/pls/users --> pointing to database 2
I would like to know, how possible is it.
Reason being we would like to deploy both our live and demo plsql application on same application server without the need to change all the dad path to:
/pls/users -- pointing to database 1
/pls/usersdb2 -- pointing to database 2
In other words, we would like to preserve the same DAD name in both live and demo application to minimise unnecessary changes to application.
Please advise.
Thanks.

Follow the directions here:
http://support.apple.com/kb/ht2534

I just got a wireless printer and we followed the directions on how to hook it up to the iPad. Somehow it seems as if we hooed it up to the wrong printer. How do we disconnect this printer from the iPad so that we can connect the correct printer?

I just got a wireless printer and we followed the directions on how to hook it up to the iPad. Somehow it seems as if we hooked it up to the wrong printer. How do we disconnect this printer from the iPad so that we can connect the correct printer?

AirPrint finds any air print enabled printers on your wifi network, and won't find any printers that are not. So if you print from, say, safari, and it finds that printer, then that is your printer. It may have a different name than you were expecting.
Turn the printer off, and see if the print job still sees the printer. That will confirm that the one it sees is yours.
What happens when you send the print job?
If you are sharing a wifi network with others, and one of them has a AirPrint printer on the network, you will see that one. There is not way to have it forget one, so you will need to know your printer from the other printer, and select the right one.

Can anyone recommend an external storage device to supplement my mac book air? I already have a time capsule but want the new device to replicate the data on that so ideally would like a device that i can connect to the time capsule through a cable.

Can anyone recommend an external storage device to supplement my mac book air? I already have a time capsule but want the new device to replicate the data on that so ideally would like a device that i can connect to the time capsule through a cable.

Hi CJR
I'm not sure how Time Capsule can be replicated onto your external drive but there is a USB port on the back of TC that can be hooked up to any recent external drive.
Another thing to think about , besides a Time Capsule failure, is the theft of your Time Capsule, so it might be a good idea to consider separating any redundant back-up from your Time Capsule or both my be stolen.
TC will back up until full and then begin deleting the oldest back-ups. Mine is a 2TB Time capsule.
My back-up plan is as follows:
1. Macbook Air back-up on Time Capsule though Time Machine backs up everything - I think it's about every 30 min or so.
2. Contacts, reminders, appointments, notes, email are backed up through iCloud.
3. iTunes and non-itunes purchased music is on iMatch (and no need to back-up) and any non-iTunes music is backed up on an HP external drive (in case Time Capsule dies)
4. Photos are on my MacBook Air and are backed up on my HP external drive.
5. Office documents (Excel, Powerpoint, Access etc) are stored in a Skydrive app (like iCloud) and Skydrive syncs these docuemnts with the MS cloud and my old PC and does not alter their native format like storing in iCloud would do.
Cheers

I have a iMac with a built in airport extreme card. Does the imac act as a wireless router so that I can connect to the internet from my iPad by tethering through my iMac?

I have a iMac with a built in airport extreme card. Does the imac act as a wireless router so that I can connect to the internet from my iPad by tethering through my iMac?

Depends which iMac exactly and your network setup, you can go into System Preferences and under the Sharing pane you can enable internet sharing from ethernet (or whereever you get your internet from) to Wi-Fi.

I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?

I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?

Irelandbound wrote:
thank you, I have the adaptors so glad that would work. I just heard adaptors burn out often. So Just thought for my main iMac computer, a plug would be best. I will get one once I move.
Any other suggestions or things I should know about apple products in Ireland. I know there are no Apple stores there.
An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
If you have something that doesn't have that input power spec, it would require a transformer.
On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out.

How to configure drop-down that change dynamically in Call Scripts

Hi,
Would like to know as how to configure drop-down choices that change dynamically based on customer response in Call Scripts / Assessment Scripts of type "Service Request - Survey".
I've read the following from CRM OnDemand pdf but was not able to figure out how to do that.
Call Scripting:
• Reduces agent training time
• Provides drop-down choices that change dynamically based on customer response
• Supports personalized interactions based on existing record data
• Facilitates up-selling and cross-selling
• Does not require third-party software
I don't have a concrete requirement as of now, but was trying to check as how it works. Please guide me if any one has implemented the same.
Thanks in Advance,
Cheers!!!
Deepak Veeravalli.

Arun,
If you plan to implement the "Querying the Active Directory" based on my code snippet,
and if you do not have permission [your account must be the part of domain admin] to do so,
Then still you can do it in least effort through code,
string usersInXml = SPContext.Current.Web.AllUsers.Xml;your xml string look like this.
<Users><User ID="2" Sid="" Name="Administrator"
LoginName="i:0#.w|murugesan\administrator" Email="" Notes="" IsSiteAdmin="True" IsDomainGroup="False" Flags="0" /><User ID="1" Sid="" Name="Murugesa Pandian" LoginName="i:0#.w|murugesan\murugesan" Email="" Notes="" IsSiteAdmin="True" IsDomainGroup="False" Flags="0" /><User ID="1073741823" Sid="S-1-0-0" Name="System Account" LoginName="SHAREPOINT\system" Email="" Notes="" IsSiteAdmin="False" IsDomainGroup="False" Flags="0" /></Users>
You can user Linq to XML to filter the "LoginName,Name and Email and then populate your drop down list.
* User must be logged into the site at least once.
Murugesa Pandian.,MCTS|App.Devleopment|Configure

Using iPad mail program I have a draft of an email. I attempted to "cancel" and "delete draft" but it is still on my screen even after shutting down and restarting. How do I exit so that I can use other mail functions?

Using iPad mail program I have a draft of an email. I have attempted to "cancel" this and "delete draft" but the email stays on my screen. How can I exit this so that I can use other email functions?

Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

HT5569 how do I change the incoming and outgoing so that I can connect to wi-fi?

I have a different email provider... I need to know how to change my incoming and outgoing so that I can receive emails on my cell phone and connect to wi-fi.

Your question is confusing because ongoing and outgoing servers have nothing to do with getting Wi-Fi.
But if you changed your email provider you can use the Settings app to delete your old email account and add your new one.
To delete your old email account
Settings > Mail, Contacts, Calendars > tap on your old email account > scroll all the way to the bottom and tap on ?delete Account
To add your new account
Settings > Mail, Contacts, Calendars > Add New Account

How do I resize so that I can max and minimize the page again. I clicked on something and now can not see the ubuntu menu bar at the bottom of my screen while browser is openj

I cant resize, minimize/maximize because the top bar of the browser has disappeared and the browser window now occupies my entire screen, I can no longer tab back and forth using the ubuntu menu bar at the bottom of the screen. I have to pull down from File to quit, there is bar at the top that I can click on with my mouse. I did this accidentally and rather quickly by clicking with the mouse on something late last night, and I can't correct or even find out what I've done

My home page background has a design on it. How can I change it back to its original plain background.

How to configure eclipse so that it can connect to remote weblogic

Similar Messages

Maybe you are looking for