How to configure mail option in newly added discussion forum portlet.

Hi,
i added a discusion forum portlet in Oracle App Server portal. here all the features are working except mail notification facility.
Please suggest me, how to configure that?
Dhananjay

If you cannot see the device then it is not attached or mapped by multipath.
Are you using the same kernel on both servers?

Similar Messages

  • Mail notification facility in newly added discussion forum

    Hi,
    i added a discusion forum portlet and deployed on Oracle App Server. here all the features are working except mail notification facility.
    Please suggest me, how to configure that?
    Dhananjay

    Hi,
    Thanx henning.
    Thanx andreas and UMA for ur prompt reply.
    You both are asking the same question abt EMAIL channel configuration. And now here I am confused.
    Can you plz give me a brief idea (or any available blog or URL) of how this Discussions iView and notifications work? What is transport, channel? Where workflow comes into picture(check reply from Henning)? And how will i come to know whether transport and channels are configured correctly?
    >>
    >>If you go to Km Config->Global Service(Advanced options)->Notificator Service.you will have to see if the channel is enabled there.. This should be your EMAIL channel.which should be configured priorly.
    >>
    Now answer to your question:
    <b>Notificator Service:</b>
    Name : notificator
    Templates Directory : /etc/notifications
    Active : CHECKED
    Channels : EMAIL
    Originators : notificator.EMAIL
    Inbox Channel : INBOX
    <b>E-Mail Channel:</b>
    There are 2 entries: EMAIL and INTERNET
    <b>EMAIL:</b>
    password : *********
    Server : exchange.sap-ag.de
    User : blank field
    Type : SMTP
    <b>INTERNET:</b>
    password : *******
    Server : sapwdf.wdf.sap-ag.de
    User : blank field
    Type : SMTP
    I dont know whether these are configured or default values. Our mail server is on different machine and i can ping it from my EP machine. I should use that server to send mails but I dont find that server's name or IP address anywhere in the above configuration.
    So now i am totally confused ???? 
    Help Needed.
    Thanx again.
    Regards,
    Nilz

  • How to down-load the discussion forum portlet??

    I am willing to download the discussion forum portlet from the
    portalstudio site.
    For that i was suppose to download and install WinCVS first.
    I did that but while setting-up the cofiguration.
    I had to enter my login name and password,provided by the
    otn.oracle.com
    WinCVS refused to recognize the login name
    i m unable to understand the problem .
    And i do not have any other option for downloading the
    discussion forum portlet.
    Is there any other way to download it
    or is there something else ,which is to be done while
    installing the WinCVS

    Hi,
    All the Materil master data is there in some of the tables.
                    MARA               Material master
         MAKT                 Material text
         MARC               Material per plant / stock
         MVKE               Material master, sales data
         MARD               Storage location / stock
         MSKA               Sales order stock
         MSPR               Project stock
         MARM               Units of measure
         MEAN               International article number
         PGMI               Planning material
         PROP               Forecast parameters
         MAPR               Link MARC <=> PROP
         MBEW               Material valuation
         MVER               Material consumption
         MLGN               Material / Warehouse number
         MLGT               Material / Storage type
         MPRP               Forecast profiles
         MDTB               MRP table
         MDKP               Header data for MRP document
         MLAN               Tax data material master
    MTQSS               Material master view: QM
    So, down load as per your requirement in to Excel sheet and do the corrections and Upload with your Data Migration Tool.
    Hope this helps..
    Regards,
    Siva

  • How to configure Mail Services in B1

    Hi All,
    I want to cinfigure the mail services in SAP B1 currently I am using SAP 2007 SP00 PL 12 My client wants that the daily reports and the Sales order should be mailed by B1 to cuntomer mail id. PLease tell the process to how to configure mail services in B1.
    Thanks & Regards
    pankaj Sharma.

    Hi Pankaj Sharma,
    The suggestion above would be a good solution to you.  However, if you do not want to use this add-on, you may just configure SBO-Mailer to perform the task. You may check all available setting for the mailer and read through Administrator Guide for how to set it up.
    Thanks,
    Gordon

  • How to configure mail using portal collaboration

    hi Guys..,
    pls tel me
    how to configure mail using portal collaboration and its uses..
    thanks
    regards
    kamal

    Hi,
    Two Configure Email, first
    You have to create a System for Groupware through System Administration ->System Configuration -> system LandScape
    Then create a Groupwaretransport
    implement SSO between your Mail server and your EP...
    and finally
    Create a Mail service...
    More Info is available at below link..
    http://help.sap.com/saphelp_nw04/helpdata/en/7c/6a469702474146a8ef2f97fe880b2f/frameset.htm
    and have a look at the thread raised by be on Calender Configuration...
    Collaboration calendar : No transport has been configured for the calendar
    Regards,
    Srinivas

  • How to Configure Mail in ECC5.0

    Dear All,
    Please guide how to configure Mail in ECC5.0
    i have Activate / enabled  SMPT  using  the T-code :  SICF
    using Transaction : SCOT
    for SMTP Connection :
    mail host :  localhost
    mail port : 25
    Code Page :  ????????????  what should i give  i have given 1100 SAP  internal  (correct or wrong) Please guide
    Supported Address Type:
    Selected Internet
    what should i give in "Address Area"  and "output format for SAP documents"
    when i am sending a mail using : SWBP  and checking in SOST message error 272 i am getting.
    Regards
    Shankar

    Dear all,
    we are not using Exchange Server.
    we enabled the Port 25 . we are able to telnet to the mail server.
    Using SICF activate SMTP port.
    when i am trying to send  using SBWP t-code : getting
    "error during send process " when we check further  " you do not have a sender address in the  choosen communication method".
    Regards
    Shankar.

  • How to configure Mail app on mountain lion to not download all my emails in hotmail server. I need only just 1-2 weeks

    How to configure Mail app on mountain lion to not download all my emails in hotmail server. I need only just 1-2 weeks

    Try going to the web based site and see if you can set up a temporary folder there. Move anything you don't want to download to that folder.

  • How to configure mail service in DRM 11.1.2.3.500

    How to configure mail service in DRM 11.1.2.3.500.
    There is a feature in Workflow Models to Notify users by sending mail.
    Can anyone help me find from where to configure mail service.

    Hi,
    If you open up the Configuration Console on the DRM Server you should be able to navigate to the second tab called "Host Machines".
    From there, select SMTP Server - and enter the details for your SMTP server. You've now configured DRM to send emails... now you just need to add it into your workflows...

  • TS3276 how to configure Mail ?

    Hi !
    How to configure Mail only to fetch a specific amount of messages on its first use?
    I'm using Mac OS X Lion 10.7.4 with Mail v. 5.2.
    Thanks a lot!

    Hi !
    How to configure Mail only to fetch a specific amount of messages on its first use?
    I'm using Mac OS X Lion 10.7.4 with Mail v. 5.2.
    Thanks a lot!

  • How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?

    Hi,
    I am new in Oracle Enterprise Manager so please tell me How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?
    Thanks,
    Sagar Pawar.

    Hi Sagar Pawar ,
    First you need to set the email notification :
    Kindly review :
    12c Cloud Control: Steps to Configure Incident Rules to Send Notifications or
    Manage Events / Incidents / Problems (Doc ID 1368036.1)
    12c Cloud Control: Steps to Configure Email Notification Method (Doc ID 1368262.1)
    Regards
    Ansari

  • How to configure mail server

    Hi All,
    we are in a process of configure mail server in one of our sap instance.
    i have done the following settings,
    1. In t-code sicf      under virtual host SAPCONNECT, 
    2.   I  have added  in host data * : *
    3.under handler list CL_SMTP_EXT_SAPCONNECT.
    4. now in scot i have added my deault domain under "settings -> default domain " <company name.com>
    5.on double clicking on SMTP i have added the following entries
      SMTP CONNECTIONS : mail host :  smtp.gmail.com
                                               port : 465
                                           code page : 0
    SUPPORT ADDRESS TYPE : i have set internet address to *
    did i miss any of the steps in configuring the SMTP mail server.
    after sending the mail when i look in to t code  sost the message number displays "672"
    please advice how can i  configure mail server for incoming and outgoing
    Thanks in advance,
    Vardhan

    Hello Vardhan,
    I suggest you to go through the below links and cross check the configuration.
    http://help.sap.com/saphelp_nw04/helpdata/en/66/9c25413fabef23e10000000a155106/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
    http://help.sap.com/saphelp_470/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
    Thanks,
    Siva Kumar
    Edited by: Siva Kumar Arivinti on Jan 19, 2012 3:16 AM

  • How to configure Mail to use different ports for POP and SMTP?

    I am trying to configure Mail for my AT&T account. It requires me to configure POP (incoming) mail for port 995, and SMTP (outgoing) mail for port 465. However there doesn't seem to be an option to configure different ports for these. Is that correct, or am I missing something?
    Alternatively can I configure two accounts, one for POP incoming and one for SMTP outgoing? My incoming POP account does work, but in configuring an outgoing account I still have to configure a POP server name and that will not work for the outgoing port.
    Any advice on how to solve this would be appreciated.

    Understand. It is really quite easy to do in Mail, too. Kappy told you how to set up the smtp piece. I gave you pop info. These two things are on different panels within Account Preferences.
    To recap his and my posts
    SMTP:
    In Mail Prefs, click on the accounts icon. Click on your att yahoo account on the list. On the right of the window, in the lower portion, you see an smtp server menu. Open it and select edit. Select Edit Server, then click on its Advanced tab. Set up port 465 with SSL.
    POP:
    This is on a different panel in Mail PRefs Accounts. Now in Mail Prefs, click on the accounts icon. Click on your att yahoo account on the list. On the right of the window, you see three tabs, acc't info, mbox behaviors, and Advanced. This is where things are different than for smtp. You are going to configure stuff on a different "advanced" panel than where you were for the smtp stuff. Click on the advanced tab. There is a field for port with a SSL checkbox next to it and an authentication drop down menu. Check the box and it should quickfill change from 110 to 995. Autentication drop down is probably already default to password.
    Did you visit the URL I gave you previously? It even gives you screen shots.

  • Configuring mail option in EP

    hi there,
             i need to configure mail for a user in EP. how can i do it?

    Hi Mridul,
    This <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/7c/6a469702474146a8ef2f97fe880b2f/frameset.htm">link</a> will help u.
    Check out the following weblogs for other options for the same.
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1770
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/434
    Regards,
    Pooja.

  • How to configure Mail Alerts in SAP R/3 System.

    Hi,
      I want to send mails to the users when alert occurs.How to configure that mail alers in R/3 system.pls send me the related information and links.
    Regards,
    Kiran.

    HI
    I think there is no standard functionality in sap u need to develop with abaper help with proper logic
    if it is for venijula s_alr_87009936  try this t.code
    Thanks & Regards
    Phaneendra
    Edited by: phaneendra Reddy on Jun 12, 2009 9:24 AM

  • How to configure mail client to only download headers(titles) of emails

    Hi there?
    I have 10 different email accounts (for some weird reasons that i think irrelevant fir this question), and i want to use Mail app as my main client. iCloud, hotmail, yahoo, gmail, other imap and pop etc.
    Now the mail client is trying to download everything from the servers which is gigs of storgae space. I need to configure mail to only download titles of emails, not the entire email with attachments etc.
    I can do that very simply in MS Outlook, and even in the old outlook express client.
    How can i do that in Mavericks mail client please? I looked everywhere
    Thanks

    Try going to the web based site and see if you can set up a temporary folder there. Move anything you don't want to download to that folder.

Maybe you are looking for

  • How do I set up subdomains pointing to folder in your site

    I am trying to determine whether it is possible to set up a series of subdomains such that each points to content within a folder in your site with the URL of pages displayed showing the subdomain without the subfolder name. Case in question- If I ha

  • How to clean the monitor?

    Hi! I've Satellite M70, one question.. How I clean my monitor? It's correct with distilled water? Sorry for my bad english.. Thx Ciao!

  • Help please:set up mac 10.4.11 with ext dsl modem to send and receive faxes

    Hi and thanks in advance. I have a G4MDD dual processor, and have a dsl modem for internet connection. I want to set up to send and receive faxes. I can make and receive phone calls while connected to the internet. any ideas or help appreciated. Than

  • SVG XML mismatched tag Parse Error

    I am running HTMLDB 2.0. I get the following error when I try to generate an SVG chart. This is from the ISSUE Tracker demo application. Any ideas XML Parsing Error: mismatched tag. Expected: </svg>. Location: http://test1:7779/pls/htmldb/f?p=120:10:

  • .MOV file "not supported..."

    Hi, I have uploaded some .MOV files from my Canon EOS550D camera to my PC and they display fine boith in VLC and in Windows Media Player.  However, when I try to open them in Adobe Premiere Elements 8.0 (M178 -9/8/2009)  get an error "This type of fi